Anyone have a problem with the number of columns in a webform in 11.1.2?

We are converting apps from 9.3 and have discovered a problem when an unspecified error occurs when trying to pull out a web form with more than 125 columns. The form works in 9.3 and loads without error in 11.1.2 . However when its run in the new version it fails with an unspecified arror. The columns are a list of base accounts. If this is broken down between the base accounts of the immediate children of the specified account then each group works properly, but if it's the base of the specified account or the base of the children of the specified account each on a separate column definition then the error occurs. Has anyone come accross this before, or is there a new (undocumented) parameter relating to columns like MaxCells?
Just to clarify: if the columns are 125 then the form works properly, if it's 126 columns then the error is generated, and it happens immediately the form is run.
Edited by: MikeWesley on 21-Jul-2011 03:53

Try copying and pasting the script of the report from the old verison into a new report in 11.1.2 instead of importing the report

Similar Messages

  • Cannot contact the Adobe Service, I have a problem with the number.

    Hi,
    I would like to have more information in regard of the Adobe DC. My intent is to buy the product and use it in my office, we are a small company (4 PC).
    If I'm not wrong I should take the Standard Plan for Business, but I cannot arrange any payment request for information because I have a problem with the number I am supposed to call.
    Is there any other way to know if this software suit fine for me and my company, and most of all how much it will cost.
    Thank you for your consideration.
    Have a nice day!
    I look forward to hearing from you.
    Best,
    Augusto

    Hi Avgvstvs67,
    Please refer this link : https://acrobat.adobe.com/in/en/pricing/business-pricing.html
    Regards,
    Rahul

  • Anyone have a problem with the iPhone 6 freezing when you're trying to send a text?

    I seem to be having a couple of problems with the iPhone 6 or possibly the update 8.1.2.  Sometimes when I turn the phone horizontally to text, nothing happens and it only works if I turn it back vertically.  Also, sometimes when I receive a call from someone who is already on my contact list, only the number shows up and not the name or picture connected with that contact.  It appears when I answer, but sometimes I don't want to answer if I don't recognize the number.
    Anyone else having these issues?  Do we need another update to the software to fix these problems?

    How much available storage do you have on your iPhone? You can find this at Settings>General>Usage
    If your available space is measured in megabytes (MB) then it is causing problems for your phone's operating system.
    If your available space is measured in gigabytes (GB) then that isn't the source of the problems and you can move to some other troubleshooting steps. First, try a simple restart  (holding the sleep wake button for about 5 seconds until the power off slider appears).
    If the problems reoccur after you've restarted the phone, I recommend Reset All Settings, which is located in Settings>General>Reset

  • Anyone have a problem with the HDMI port suddenly not recognizing any digital source imput signal?

    I have an HP 2711x monitor. 
    Anyone suddenly have a problem with it no longer recognizing any digital source input with the HDMI port (or DVI), yet the VGA port works fine?
    Thanks.

    Hello Largelee,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your HP 2711x Monitor not displaying HDMI or DVI inputs, yet it can display VGA inputs. Are these inputs all coming from the same device? Such as your computer? Does the computer's outputs show up on other devices via HDMI and DVI? If it works are you using the same cables? Are there any messages displayed on the monitors screen when you have the HDMI or DVI hooked up?
    Check to see if any of the documents below pertaining to the HP 2711x Monitor pertain to your issue:
    Flat Panel Monitor Displays Message about No Signal, Signal out of Range, Sleep, or Power Save
    'Input out of Range' Error After a Recovery or Upgrading to Windows 7
    Monitor is Blank
    Please respond with the answers to these questions so I can further assist you. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Does anyone have a problem with the ipad air screen?

    I bought an ipad air last week and the left edge of the screen was darker than the other side. It was obvious so I just returned it and bought a new one since the store didn't have the same style in storage. I bought another one from another retailer, and just found the same problem, but not as serious as the former one. So I just took it back to the store the next day and exchange another one. Unfortunately, the third one had the same problem at the up-left corner of the screen. I admit that I am picky, but I think I pay this amount of money so I deserve perfect screen. If the brightness of the two sides is different, I dont think it is a product of good quality.
    Just want know if anyone else have the same problem with me. Or you just can bear the small diffrence of display.  BTW, in China, it is reported spreadly that the ipad air screen has a problem. They even generalize the serial number for problematic ipad air.

    Yep.   Many quality control problems.   The new mini has fewer issues.   No problems with older models.
    Steve Jobs, where are you when we need you!

  • Does anyone have a problem with the code window not showing code?

    I am having a problem with this update where the code window is blank and where I cannot add anything/ The text does appears in the design or live window.
    I just use DW to format text that will go into Edge Animate.

    Hi,
    Are you getting this issue on all the files?
    Please share any screenshot.
    Regards,
    Devendra

  • Is anyone have a problem with the mail locking up in OS5?

    My iphone is have the Mail lock up.  I can kill it and then everything works again.  Anyone else having this problem?

    Try copying and pasting the script of the report from the old verison into a new report in 11.1.2 instead of importing the report

  • I have a problem with the pop-up prompt to enter my serial number for installation, it won't pop up when I entered the redemption code. Can someone help?

    I have a problem with the pop-up prompt to enter my serial number for installation, it won't pop up when I entered the redemption code. Can someone help?

    There is no pop up. There is a window that is part of the installation process. If you entered a wrong number, like a redemption code, you would have wound up installing it as a trial. In that case, go to the Help menu in the editor and look for an option there.
    If that isn't what you're talking about, you really need to explain in more detail.

  • Is anyone else having problems with the Canon Online Store?

    In the last month or so, I've had one problem after another with the Canon Online Store; from being unable to delete items from the shopping cart; to not being able to add "in stock" items; disappearing Wish Lists; and just now, I tried to add one lens cap to the 6 or 7 items I already had in the Shopping Cart, and they disappeared.
    I've called, more than once, and I've written, also more than once, to Canon Support about this, but they ignore what I tell them, and tell me there are no problems with the Online Store.  They don't even seem to report to anyone that anyone has complained, because each time is "the first time", even though I've called (more than once) and written (more than once) to them about continuing Online Stores problems.
    Is anyone else having problems with the Canon Online Store?
    Why does Canon not care to track reported problems with the storefront part of their web-site? 
    I'm not trying to insult Canon, it's just that I've been a Canon customer for less than 3 months, and the're only batting .333, so far.  Canon Support was very quick to respond about a concern I had that a 50mm f/1.4 I had just purchased was authentic or not.  In trying to register that lens, I looked up on the Canon web site where to find the serial number.  Since my new lens did not have any numbers there, I was concerned I had been sold a fake.  But, then Canon Support sent me link to a different online document that showed a few different places where it might be, and there it was. 
    Is Canon like that with other problems, as well?  Or is their "batting" average better than my very limited experience? 
    I just love my Rebel T5i, and my Canon lenses (from "the Kit brothers of the Cropped Frame coral":  EF-S 18-55mm f/3.5-5.6 IS STM, and EF-S 70-300mm f/4-5.6 IS USM; to the "Truly Nifty Fifty", the 50mm f/1.4 USM, [the f/1.8 is just a "thrifty fifty"], and finally, the "Super-Macro" MP-E 65mm f/2.8 1x-5x Macro)! 
    Regards and Thanks,
    Calen
    As an old friend used to always say,
    "Keep Looking Up!"
    Calen

    Hi Danny.  Thanks for replying.
    I only use my desktop PC to access Canon's web site, and I've been using Mozilla Firefox for years.  And, yes, it is the latest version.  Since Canon REFUSES to support the use of Firefox on it's web site, WHAT BROWSER DOES CANON SUPPORT?  WHEN did Canon STOP SUPPORTING Firefox?
    I've been told that there are 2 pending orders in my account.  Yet, I NEVER placed those orders!  WHY CAN'T CANON SEE THAT THIS IS A PROBLEM??? 
    Instead of off-target suggestions, and pasted boilerplate REFUSALS TO EVEN LOOK at this issue, I would prefer it if Canon went "old school", and FIXED THE PROBLEM, in the first place!  But, maybe that's a bit too grown up of an answer for you! 
    "Award-winning" support???   And, just exactly WHAT AWARD did Canon "support" WIN for CONSISTANTLY IGNORING REPORTED PROBLEMS???  The OSTRICH?
    Please pull your head out, and FIX this problem, OR YOU ARE THE PROBLEM!!!
    Thank you for your "prompt" attention to this matter!
    Calen
    As an old friend used to always say,
    "Keep Looking Up!"
    Calen

  • I have a problem with the touchsmart 420pc, after a running time (2 hour approx) is turned off,

    good afternoon, I have a problem with the touchsmart 420pc, after a running time (2 hour approx) is turned off, probably warming, but this rare, is suddenly going slow parapadear and image.
    also sounds like when damaged ballasts for lamps,
    ANYONE know what could be the cuasa and / or what is causing this.
    greetings and thanks in advance

    Hi,
    Please write your TouchSmart model number, which system are you using and country of purchase.
    Resource:
    How Do I Find My Model Number?
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

    Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

    I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.

  • Has anyone had a problem with the letters literally rubbing off the keyboard?

    Has anyone had a problem with the letters actually disappearing from the keybord, like being gradually rubbed out? My macbook air had this problem one year after purchase. They fixed it for free. Now, a year later, I have the same prob. Apple doesnt want to know.
    I would be delighted with any suggestions, reactions etc. thanks in advance.

    I don't have to be doing anything or be anywhere near the computer.
    The machine feels warm but i don't know if thats normal or not.
    Imac, 20-inch,mid 2007
    Processor 2 GB  intel core 2 Duo
    Memory 2 GB 667 MHz DDR2 SDRAM
    Graphics ATI Radeon HD 2400 XT 128 MB
    Software OS X 10.8.2 (12C54)
    No third party extensions that Iknow of

  • Hello, i have a problem with this number code  213:19,  please help me!

    Hello, i have a problem with this number code  213:19,  please help me!

    dan
    What version of Premiere Elements and on what computer operating system is it running?
    If you are using Premiere Elements 13, have you updated it to 13.1 yet? If not, please do so using an opened project's Help Menu/Updates.
    What type of user account are you using....local administrator or domain type?
    Please review the following Adobe document on the 213.19 issue. Have you read that already?
    Error 213:19 | Problem has occurred with the licensing of this product
    ATR

  • TS1702 Is anyone having a problem with the smurfs app

    Just wondering if anyone is having problems with the Smurfs app.  Click on it to open it, it opens & then shuts down almost immediately.  Can anyone help?

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

  • I have a problem with the FM "RH_START_EXCEL_WITH_DATA".

    Hi,
    i have a problem with the FM "RH_START_EXCEL_WITH_DATA". After the release of our SAP-system changed to gui 7.1 the FM doesn't work. After calling the FM with an filled internal table Excel starts but the spreadsheet is empty.
    What can i do without changing Function 'RH_START_EXCEL_WITH_DATA'?
    CALL FUNCTION 'RH_START_EXCEL_WITH_DATA'
    EXPORTING
    data_name = hf_datei
    data_path_flag = 'W'
    wait = ' '
    data_table = iexcel[]
    EXCEPTIONS
    OTHERS = 1.
    IF sy-subrc <> 0.
    MESSAGE e020 WITH hf_datei sy-subrc.
    ENDIF.

    Hi Jake,
    Pass the filename with .xls extension.
    e.g
    DATA: t_scarr LIKE STANDARD TABLE OF scarr.
    SELECT * FROM scarr INTO TABLE t_scarr UP TO 10 ROWS.
    CALL FUNCTION 'RH_START_EXCEL_WITH_DATA'
    EXPORTING
       DATA_FILENAME               = 'Santhosh.xls'
       <b>DATA_PATH_FLAG</b>       = 'W'
       DATA_TABLE                      = t_scarr[]
       WAIT                                   = 'X'
    EXCEPTIONS
       NO_BATCH                  = 1
       EXCEL_NOT_INSTALLED       = 2
       INTERNAL_ERROR            = 3
       CANCELLED                 = 4
       DOWNLOAD_ERROR            = 5
       NO_AUTHORITY              = 6
       FILE_NOT_DELETED          = 7
       OTHERS                    = 8
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    And u just check the Value range for domain HRPATHFLAG. U will come to know what are values u can pass for the <b>DATA_PATH_FLAG---Path Flag for Directory Determination</b>. U have some 6 values for that domain.Choose carefully or else u ll get a download error.
    I hope this will help u.
    Thanks & Regards
    Santhosh
    Message was edited by:
            santhosh ds

Maybe you are looking for