Anyone have a source for the N93 updates?

Now that nokia seems to have pulled support for N93 firmware updates, anyone have a source for them? Or am I stuck with the **bleep**tastic 10.0.025?Message Edited by kujako on 21-Nov-2006
08:17 PM

You'd be better trying your nearest Nokia Service Centre asking for the source is going to annoy people here... it's not publicly available.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Similar Messages

  • Anyone have a link for the prior update before 1-10-2006?

    Woke up this morning to find my iPod acting somewhat normal (i.e. wasn't frozen with stupid icons on the screen, but showed the menus and all). Can someone link me to where i can get an older updater so i can try to end this problem once and for all? I don't know how it happened, but i wish i could tell everyone.

    It's in French, but easy to understand
    http://www.touslesdrivers.com/index.php?vpage=26&vcode=67

  • I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

    I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

    See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
    tt2

  • Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

    Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

    I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it.  I cannot fix this!  I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up.  HELP!  This is driving me crazy.  How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??

  • Anyone have an Answer for the ipad Hotspot problem in Australia

    Anyone have an Answer for the ipad Hotspot problem in Australia

    Sorry but we can't really help you unless we know your problem. Enjoy your new iPad

  • HT6208 I have enough space for the recent update but it won't update??? ***?  How do I fix this?

    I have enough storage for the update but I cannot get it to update?? Anyone have the same problem?

    Connect your iPad to iTune and Check For Updates (tap to enlarge image)

  • Does anyone have ANY idea when the next update is going to happen?

    I'm editing a wedding video now and am waiting for the new updates (especially the functionality between Speedgrade and PP) to drop. I had heard a few weeks back that they were going to happen 10/15 but that date came and went. Then at the Create Now tour they said "in the next few days", but that was nearly a week ago. Does ANYONE have the scoop on this? I'm chomping at the bit....

    Due to Adobe being a publically-traded company, where mis-information or disappointments from missed expectations can affect their market cap, non-disclosure-agreements of employees and contractors would prevent divulging of such information in a public forum.

  • Anyone have a vi for the HP 71603B or 71612B BERT

    Does anyone have a vi for either hewlett packard's 71603B or 71612 bit error
    performance analyzers?
    Thankx

    I'm on my second 8600 within 2 weeks - tonight I stumbled upon a *possible* glitch that may have caused both printers to freeze. I did not have my wireless connection set up but I did have the wireless enabled on the printer - the blue wireless indicator light on the console was flashing. This printer repeatedly froze, requiring the power cord to be disconnected/reconnected to reboot the printer.  At some point I disabled the wireless, using the console menu and the machine no longer froze. WHAT???  When I restarted the wireless and completed the setup, the blue indicator light went solid and...so far no freezes.  I can access the printer via wireless connection and a USB connection on a different computer.   IMO, this should not happen.  I'm thinking if my router goes down, it will cause a wireless connection failure and the printer will freeze - again.  I will test this theory when I feel up to it - but, the frustration of the past couple hours has me very disinterested in screwing with it now - it continues to work so I think I'll go fishing....
    AL

  • HT1338 Does anyone have a fix for the error message "Because a USB device was drawing too much power from your computer one or more of your USB devices have been disabled" - this is a brand new machine with nothing connected to the USB ports - i've done u

    Hi
    does anyone know how to fix the message on my iMac:
    "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
    This is a brand new machine and did not have anything attached to the USB ports"
    Thanks for any help

    If you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.

  • Anyone have advice on installing the recent update to Itunes on a 64 bit Windows 7 PC?  I can download it, but can't run it.  I have already uninstalled the prior version.  Thanks.

    Anyone have advice on how to install the recent Itunes update on a 64 bit Windows 7 PC?  I've downloaded the update, uninstalled the prior version, but no luck.  Thanks.

    I'm guessing - if you've uninstalled the previous version, then surely there's nothing left to "update", is there?
    Can you undo the "uninstallation" procedure? If not, you will have to download iTunes again and install it as a new installation.

  • Does anyone have a solution for the unstability on ios6

    Hi, i have recently downloaded and installed the latest software, ios6.
       I really like the updated theme (i.e. I like the music player screen and the app store layout) However, i am sorely disappointed with the performance. The software is very unstable. Apps and games constantly crash. It isn't certain applications though, all the applications installed on my ipod constantly crash. App store is virtually impossible to use also as it crashes literally after every few seconds of use. It is also very slow. I was wondering if anybody knows of a solution or if there is a coming update to resolve the problem"s".

    Hi,
    Some of what you are describing is commun to a lot of user, some other not.
    For specific third party apps crashing, I guess you will have to wait until an update for iOS6 from the developpers.  As for the App Store crashing, some research in forums that this is to be spreaded to many users.  For this one, no options seems to efficienly handle the issue and therefore, we will have to wait until an Apple update.
    The fact that all your apps are crashing and that you got slow performances seems to be a more specific issue.  I think that performing a restore on your iPod should worth your time.  I personally got a few crashing apps as well as the AppStore but other than this, performaces are quite as with iOS5.

  • Does anyone have a solution for the I phone 4 acting as though it is sideways under most applications?  Is there a simple solution?

    My daughters I phone 4 acts as though it is sideways when being used for the camera, messaging, and music,  Shutting the phone off seemed to fix it the first time, but it has acted up again and that remedy no longer works.  Am I missing something in the settings ?  Is there a simple solution ?  Thanks

    Hi,
    Some of what you are describing is commun to a lot of user, some other not.
    For specific third party apps crashing, I guess you will have to wait until an update for iOS6 from the developpers.  As for the App Store crashing, some research in forums that this is to be spreaded to many users.  For this one, no options seems to efficienly handle the issue and therefore, we will have to wait until an Apple update.
    The fact that all your apps are crashing and that you got slow performances seems to be a more specific issue.  I think that performing a restore on your iPod should worth your time.  I personally got a few crashing apps as well as the AppStore but other than this, performaces are quite as with iOS5.

  • Anyone have a VI for the SR844?

    I'm looking for a VI to control a lock-in amplifier from Stanford Research
    Systems with LabView. If anyone has one they could send me, or for the SR830,i
    would appreciate it very much. I'm also just learning labview, so if anyonehas
    any tips for using labview with the SR844 they would definitely help.

    zach prager wrote:
    > I'm looking for a VI to control a lock-in amplifier from Stanford Research
    > Systems with LabView. If anyone has one they could send me, or for the SR830,
    > i would appreciate it very much. I'm also just learning labview, so if anyone
    > has any tips for using labview with the SR844 they would definitely help.
    You should go to NI's web site (www.ni.com) under support and search the
    instrument driver database. There are several VIs for SR products. I did not
    see any for the 844 but there is one for the 830.
    You can get the drivers for a similar instrument and possibly modifiy them for
    the 844.
    Most vendors use similar drivers for similar instruments.
    Kevin Kent

  • Anyone have a driver for the ImageClass D860 that works with a Windows 8 64 bit computer?

    Please help.  If anyone has or knows of a driver for the ImageClass D860 that works with a Windows 8 64 bit computer, please send it or the link to me at [MOD removed email address per FORUM GUIDELINES].     Thx.

    I am trying to do a wedding and now spending too much time searching the web for tutorials and reviews to try to figure out what is going on. There needs to be better detailed help.

  • HP OfficeJet Pro 8600 - Anyone have a solution for the 8600 freezing up?

    I bought this All-In-One for xmass and the initial install went fine.  I've attached it to my wireless network for use by all the PC's/Laptops in my house.  After a couple of weeks, I noticed that the printer connection was lost, and when I tried to scroll through the printer menu, I discovered it was frozen or locked.  I could not even get it to turn off with the power button.  The only way to regain access was to unplug the printer.  Once it's back up, it seems to work for no more than 15-20 minutes, and then locks up again.  I thought it was a faulty machine so I returned it to store for a replacement.  The second printer acted the exact same way.  It worked fine for a couple of weeks and then began freezing up again.  I'm going to return this one and just get my money back if I can't get this resolved. 
    I did see another posting about this, but the resolution did not work (re-install software on PC and return printer to factory settings). 
    Has anyone found a solution to this issue?

    I'm on my second 8600 within 2 weeks - tonight I stumbled upon a *possible* glitch that may have caused both printers to freeze. I did not have my wireless connection set up but I did have the wireless enabled on the printer - the blue wireless indicator light on the console was flashing. This printer repeatedly froze, requiring the power cord to be disconnected/reconnected to reboot the printer.  At some point I disabled the wireless, using the console menu and the machine no longer froze. WHAT???  When I restarted the wireless and completed the setup, the blue indicator light went solid and...so far no freezes.  I can access the printer via wireless connection and a USB connection on a different computer.   IMO, this should not happen.  I'm thinking if my router goes down, it will cause a wireless connection failure and the printer will freeze - again.  I will test this theory when I feel up to it - but, the frustration of the past couple hours has me very disinterested in screwing with it now - it continues to work so I think I'll go fishing....
    AL

Maybe you are looking for

  • MIC / VENDOR Trend analysis in Graphical mode

    Dear Freinds, please explain me how top perform trend analysis in graphical mode for a material procured from a vendor over a period of time. Report should display the charecterstics recorded for Material / Vendor combination. I am not using SPC char

  • How to get OS X Mail to treat Gmail like iOS Mail

    I really like how iOS Mail only downloads my Gmail's Inbox and other directories I navigate to. I don't like how OS X Mail downloads my entire malbox automatically. Is there a way to get OS X Mail to behave like iOS Mail in terms of what directories

  • Combine into one IDOC

    Dear FI Idoc Gurus, Iu2019m using basic type PEXR2002 , this idoc is generated when I  do a payment run via F110. The idoc generation as far as I know is standard , with some enhancement done via user exit - EXIT_SAPLIEDP_902. Currently for each paym

  • Print Button Widget disappears if print properties is cancelled

    Hello All, Maybe I am doing something wrong, but when using the Captivate 5 print button widget the button hides when the clicked.  The print properties panel appears. That all makes sense (the button does not need to appear in the screen print), but

  • I have had an EE account for 3 weeks now and still can't text or receive calls

    I have had an EE account for 3 weeks now and still can't text or receive calls