Anyone have a VI for the SR844?

I'm looking for a VI to control a lock-in amplifier from Stanford Research
Systems with LabView. If anyone has one they could send me, or for the SR830,i
would appreciate it very much. I'm also just learning labview, so if anyonehas
any tips for using labview with the SR844 they would definitely help.

zach prager wrote:
> I'm looking for a VI to control a lock-in amplifier from Stanford Research
> Systems with LabView. If anyone has one they could send me, or for the SR830,
> i would appreciate it very much. I'm also just learning labview, so if anyone
> has any tips for using labview with the SR844 they would definitely help.
You should go to NI's web site (www.ni.com) under support and search the
instrument driver database. There are several VIs for SR products. I did not
see any for the 844 but there is one for the 830.
You can get the drivers for a similar instrument and possibly modifiy them for
the 844.
Most vendors use similar drivers for similar instruments.
Kevin Kent

Similar Messages

  • Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

    Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

    I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it.  I cannot fix this!  I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up.  HELP!  This is driving me crazy.  How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??

  • Anyone have an Answer for the ipad Hotspot problem in Australia

    Anyone have an Answer for the ipad Hotspot problem in Australia

    Sorry but we can't really help you unless we know your problem. Enjoy your new iPad

  • Anyone have a source for the N93 updates?

    Now that nokia seems to have pulled support for N93 firmware updates, anyone have a source for them? Or am I stuck with the **bleep**tastic 10.0.025?Message Edited by kujako on 21-Nov-2006
    08:17 PM

    You'd be better trying your nearest Nokia Service Centre asking for the source is going to annoy people here... it's not publicly available.
    Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
    Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

  • Anyone have a vi for the HP 71603B or 71612B BERT

    Does anyone have a vi for either hewlett packard's 71603B or 71612 bit error
    performance analyzers?
    Thankx

    I'm on my second 8600 within 2 weeks - tonight I stumbled upon a *possible* glitch that may have caused both printers to freeze. I did not have my wireless connection set up but I did have the wireless enabled on the printer - the blue wireless indicator light on the console was flashing. This printer repeatedly froze, requiring the power cord to be disconnected/reconnected to reboot the printer.  At some point I disabled the wireless, using the console menu and the machine no longer froze. WHAT???  When I restarted the wireless and completed the setup, the blue indicator light went solid and...so far no freezes.  I can access the printer via wireless connection and a USB connection on a different computer.   IMO, this should not happen.  I'm thinking if my router goes down, it will cause a wireless connection failure and the printer will freeze - again.  I will test this theory when I feel up to it - but, the frustration of the past couple hours has me very disinterested in screwing with it now - it continues to work so I think I'll go fishing....
    AL

  • HT1338 Does anyone have a fix for the error message "Because a USB device was drawing too much power from your computer one or more of your USB devices have been disabled" - this is a brand new machine with nothing connected to the USB ports - i've done u

    Hi
    does anyone know how to fix the message on my iMac:
    "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
    This is a brand new machine and did not have anything attached to the USB ports"
    Thanks for any help

    If you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.

  • Does anyone have a solution for the unstability on ios6

    Hi, i have recently downloaded and installed the latest software, ios6.
       I really like the updated theme (i.e. I like the music player screen and the app store layout) However, i am sorely disappointed with the performance. The software is very unstable. Apps and games constantly crash. It isn't certain applications though, all the applications installed on my ipod constantly crash. App store is virtually impossible to use also as it crashes literally after every few seconds of use. It is also very slow. I was wondering if anybody knows of a solution or if there is a coming update to resolve the problem"s".

    Hi,
    Some of what you are describing is commun to a lot of user, some other not.
    For specific third party apps crashing, I guess you will have to wait until an update for iOS6 from the developpers.  As for the App Store crashing, some research in forums that this is to be spreaded to many users.  For this one, no options seems to efficienly handle the issue and therefore, we will have to wait until an Apple update.
    The fact that all your apps are crashing and that you got slow performances seems to be a more specific issue.  I think that performing a restore on your iPod should worth your time.  I personally got a few crashing apps as well as the AppStore but other than this, performaces are quite as with iOS5.

  • Does anyone have a solution for the I phone 4 acting as though it is sideways under most applications?  Is there a simple solution?

    My daughters I phone 4 acts as though it is sideways when being used for the camera, messaging, and music,  Shutting the phone off seemed to fix it the first time, but it has acted up again and that remedy no longer works.  Am I missing something in the settings ?  Is there a simple solution ?  Thanks

    Hi,
    Some of what you are describing is commun to a lot of user, some other not.
    For specific third party apps crashing, I guess you will have to wait until an update for iOS6 from the developpers.  As for the App Store crashing, some research in forums that this is to be spreaded to many users.  For this one, no options seems to efficienly handle the issue and therefore, we will have to wait until an Apple update.
    The fact that all your apps are crashing and that you got slow performances seems to be a more specific issue.  I think that performing a restore on your iPod should worth your time.  I personally got a few crashing apps as well as the AppStore but other than this, performaces are quite as with iOS5.

  • Anyone have a driver for the ImageClass D860 that works with a Windows 8 64 bit computer?

    Please help.  If anyone has or knows of a driver for the ImageClass D860 that works with a Windows 8 64 bit computer, please send it or the link to me at [MOD removed email address per FORUM GUIDELINES].     Thx.

    I am trying to do a wedding and now spending too much time searching the web for tutorials and reviews to try to figure out what is going on. There needs to be better detailed help.

  • HP OfficeJet Pro 8600 - Anyone have a solution for the 8600 freezing up?

    I bought this All-In-One for xmass and the initial install went fine.  I've attached it to my wireless network for use by all the PC's/Laptops in my house.  After a couple of weeks, I noticed that the printer connection was lost, and when I tried to scroll through the printer menu, I discovered it was frozen or locked.  I could not even get it to turn off with the power button.  The only way to regain access was to unplug the printer.  Once it's back up, it seems to work for no more than 15-20 minutes, and then locks up again.  I thought it was a faulty machine so I returned it to store for a replacement.  The second printer acted the exact same way.  It worked fine for a couple of weeks and then began freezing up again.  I'm going to return this one and just get my money back if I can't get this resolved. 
    I did see another posting about this, but the resolution did not work (re-install software on PC and return printer to factory settings). 
    Has anyone found a solution to this issue?

    I'm on my second 8600 within 2 weeks - tonight I stumbled upon a *possible* glitch that may have caused both printers to freeze. I did not have my wireless connection set up but I did have the wireless enabled on the printer - the blue wireless indicator light on the console was flashing. This printer repeatedly froze, requiring the power cord to be disconnected/reconnected to reboot the printer.  At some point I disabled the wireless, using the console menu and the machine no longer froze. WHAT???  When I restarted the wireless and completed the setup, the blue indicator light went solid and...so far no freezes.  I can access the printer via wireless connection and a USB connection on a different computer.   IMO, this should not happen.  I'm thinking if my router goes down, it will cause a wireless connection failure and the printer will freeze - again.  I will test this theory when I feel up to it - but, the frustration of the past couple hours has me very disinterested in screwing with it now - it continues to work so I think I'll go fishing....
    AL

  • Does anyone have a fix for the error message "Because a USB device was drawing too much power from your computer one or more of your USB devices have been disabled

    I keep getting this error message over and over when all I have plugged in is an Apple USB keyboard and Apple Mouse.  Please help...this is crippling the computer!

    Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

  • Anyone have a solution for the problems with Maverick iMovie?

    I made the upgrade to Maverick and expected to have a bit of a learning curve but not a total revamp of basic stuff.  I have  a LOT of video files and when iMovie made the conversion, my files were so jumbled I couldn't make heads or tails of where things were.  In the previous iMovie version I had all of my files nice and neat in folders, dated, labeled so I could discern what was what without too much trouble.  Not so once the conversion was complete.  I was so glad to find that my old version of iMovie was still on my computer as well and delighted that my files were intact and I could easily find them.  Here's hoping that Apple is on the ball and will soon have the new imovie working like we have come to expect Apple products to work.
    In the meantime, any pointers would be appreciated. 

    I am trying to do a wedding and now spending too much time searching the web for tutorials and reviews to try to figure out what is going on. There needs to be better detailed help.

  • Anyone have a fix for the iPhone 4s "Saving Photo" hang/rendering/error?

    Just got a new iPhone 4s and having issues with the camera/photos.
    First, I restored the phone from a recent backup of my iPhone 4. All seemed fine, but somewhere along the line I lost the ability to send photos via email or mms - camera app just hangs on "SAVING PHOTO", then the photo appears in the camera roll as a black box, but it CAN be seen in the little preview wiindow on the left side of the camera app control bar. Other photos look half blurry as in partially rendered. iPhoto will not recognize any of these photos either. I am backing up to iCloud but do NOT have Photo Stream enabled.
    A restore to factory settings and the camera + send works ok, but then when I restore from my backup problems come back which leads me to believe its a configuration issue maybe due to permissioning.
    Finally, I did a restore and just resynced the apps and reconfigured all the other settings. The phone now takes photos and I can send them, but iPhoto won't recognize them. Additionally, if I take a photo then delete it, it will still show in the preview window on the control bar of the camera, but its not in the camera roll. I still get some half rendered images. Oddly, this only seems to occur when I'm attached to wifi - as if its trying to sync with the cloud or itunes, but I have that disabled.
    Anyone run into these issues and hopefuly have a resolution?
    Thanks

    I'm having the same issue, except mine only came up once I turned Photo Stream on.  However, with Photo Stream on, I can view the photos fine on my iPad.  They are all just blacked out or blurry on my iPhone.  This means that I can take photos with my iPhone but then cannot view them until I get home and sync to the iPad via Photo Stream.
    Also, I dont' know if it's linked, but I cannot access the included Wallpapers in Settings.  It just brings up a blank page.  I'm planning on going in to the local Apple Store, but was hoping someone might have figured out what was happening with this issue.

  • Anyone have a link for the prior update before 1-10-2006?

    Woke up this morning to find my iPod acting somewhat normal (i.e. wasn't frozen with stupid icons on the screen, but showed the menus and all). Can someone link me to where i can get an older updater so i can try to end this problem once and for all? I don't know how it happened, but i wish i could tell everyone.

    It's in French, but easy to understand
    http://www.touslesdrivers.com/index.php?vpage=26&vcode=67

  • Anyone have a solution for the ubiquitous problem of the printer not recognizing a new HP cartridge?

    I have seen other posts about the HP printers not recognizing that a new HP cartridge has been put in.  At the price of the cartridges, this is a most irritating problem, and apparently a weak spot with the HP printers.  Mine is not heavily used at all and this is the 2nd time it would not recognize.  Thanks.

    Please read this post then provide some details.  What printer model? What operating system?  Are there any error messages on the printer or computer screen?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for

  • Huge increase in monthly payments AND billed for w...

     I moved back to BT for calls a couple of years ago and set up a monthly payment plan to help with the cost as I'm on  a low income. In March I also signed up for BT Broadband. My payments up until then had been £45 a month, BT anytime plan ( I use a

  • Using my girlfriend's ipad to play my music on traktor without getting the 90 day message.

    I want to download a few of my previous purchases on to my girlfriend's ipad so that I can have a mix using traktor. When I try to download my previous purchases in iTunes there is a message saying that this device will not be able to download purcha

  • Tables for credit Memo and Purchase order

    Hi all, I need to develop a report to dispaly all the credit memos for the open qty, My issue that is  there any table where we can have information for credit memos and purchase order, like the input fields is company code,customer number,fiscal yea

  • Purchase Order Release Strategy Approval

    HI All, I have an issue with the Purchase Order Release Strategy, I need to set the Release strategy at 2 levels. Level one will have 1 approver Level two must have two approvers. The scene is: Level one will approve all purchase orders betwee 400 to

  • Reg: NFS connectivty at receiver file adapter

    Hi Friends I have a requirement to post files to a file system(3rd party) using NFS connection, the target path is in shared mode and I am able to access that path when i copy that path in RUN(local system). But when I have maintained the same in the