Anyone have an archive of cmterm-devicepack6.0.1.3121-1.cop.sgn???

I am working with TAC to get this file:    cmterm-devicepack6.0.1.3121-1.cop.sgn
The download link is not working -
https://software.cisco.com/download/release.html?mdfid=280968161&reltype=all&relind=AVAILABLE&release=6.0%281.3121%29&softwareid=282074299&sortparam=
And so far they discovered that the share/data it links to is no longer accessible and working to recover it.
I need this to get my MCS server up to a version to match a clients to start an upgrade of a BE5K server that is in production and trying to avoid upgrading the live 6.0.1-3121-1 server to 6.1.X due to downtime needed.
Please just reply if you have a copy of this Device Pack - I am aware of my other options but at this time we are trying to avoid downtime if at all possible.
Thanks,
Brian Wyland

I am working with TAC to get this file:    cmterm-devicepack6.0.1.3121-1.cop.sgn
The download link is not working -
https://software.cisco.com/download/release.html?mdfid=280968161&reltype=all&relind=AVAILABLE&release=6.0%281.3121%29&softwareid=282074299&sortparam=
And so far they discovered that the share/data it links to is no longer accessible and working to recover it.
I need this to get my MCS server up to a version to match a clients to start an upgrade of a BE5K server that is in production and trying to avoid upgrading the live 6.0.1-3121-1 server to 6.1.X due to downtime needed.
Please just reply if you have a copy of this Device Pack - I am aware of my other options but at this time we are trying to avoid downtime if at all possible.
Thanks,
Brian Wyland

Similar Messages

  • I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    Hi Ali,
    I'll just add this reference to the good tips from my friend Manish (+5)
    Support for the 7800 series in CUCM 8.6.2 was first added with this
    Device Pack;
    Cisco Unified Communications Manager
    Device Package 8.6(2)(24104-1)Release Notes
    Cisco Unified Communications Manager Device Package Release 8.6(2)
    adds support for the Cisco IP Phones
    7821, 7841, and 7861 running SIP firmware release 10.1(1).
    The steps are in this doc
    http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
    You might as well install the latest 8.6.2 Device pack
    cmterm-devicepack8.6.2.24112-1.cop.sgn
    Cheers!
    Rob
    "Seek it out and ye shall find  " 
    - OneRepublic

  • Does anyone have the code to use an image button as the reset button?

    Does anyone have the code to use an image button as the reset button? I'm finally at the end of the form and got the submit button to work as an image button, but cannot do the same with the reset button.  Any help is greatly appreciated!

    I agree. 
    http://www.456bereastreet.com/archive/200909/almost_never_add_a_reset_button_to_a_form/
    Nancy O.

  • RE: (forte-users) Does anyone have experience using OracleLarge Objects

    hi ,
    A few months ago, I tried a oracle stored procedure with a BLOB parameter,
    but Forte(3.l2) could not recognize the blob variable. I used oracle 8.0
    hth
    suma
    -----Original Message-----
    From: Amin, Kamran [mailto:kamran.aminlendware.com]
    Sent: Thursday, March 29, 2001 2:40 PM
    To: 'Forte User Group'
    Cc: Magaliff, Bill
    Subject: (forte-users) Does anyone have experience using Oracle Large
    Objects (LOB's)?
    Does anyone have experience using Oracle Large Objects (LOB's) -
    specifically the CLOB datatype? Forte supports Oracle LONG's but given that
    Oracle is going to phase out that datatype and they're trying to push users
    towards CLOB's instead of LONG's, I want to find out if Forte can handle it
    and, if so, what we should know about mapping Forte datatypes to the Oracle
    CLOB. [Their compatibility matrix for v3.5 indicates suppport under Oracle
    8.1.x, and CLOB's were introduced back in 8.0.x - but the word from Forte is
    that they currently don't support it.]
    thanks in advance.
    ka
    For the archives, go to: http://lists.xpedior.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

    Hi,
    Did you get any solution to this. If yes, please share.
    Thanks,
    Tints

  • Does anyone have a list of the fonts that may not translate well between keynote and powerpoint?

    does anyone have a list of the fonts that may not translate well between keynote and powerpoint?

    Is this it? (might take a few seconds to transfer to the right page)
    http://web.archive.org/web/20090223143955/http://kb.adobe.com/selfservice/viewContent.do?e xternalId=kb404440&sliceId=1
    MTSTUNER

  • Anyone have any compatibility issues with existing software?

    Specifically, Adobe Lightroom and Photoshop 6? Last time I updated Mac OSX, I had all kinds of issues with the plugins for Lightroom and Photoshop, but I think that was more to do with going from 32 bit to 64 bit. I'm sure Mountiain Lion is still 64 bit, but I'm  reluctant to update. Anyone have any issues after upgrading?

    A client of mine used to have a fibrejet network. Still do but now they use it for archive only-- deep storage.
    As I recall, there was some limitation as to the number of users who could have write privileges at the same time. All users could read all the time, but only one I believe could write at one time.
    Don't take this as gospel because I'm old and forgetful. And grumpy.

  • Anyone have any news on Sprint EVDO for MBP

    Anyone have any new information? Still waiting for Sprint EVDO for these express slots.

    I am not sure where you got your information on the
    use of the phone as a modem. If you use the USB 2
    synch cable with a treo 700p, or the optional USB
    cable for other phones to use phone as a modem mode,
    you should get as good, or better throughput. Robert
    Morgan at www.barefeats.com did the comparison of an
    EVDO card vs. phone as a modem with the use of a
    cable. While not elegant, it does work. With the Treo
    I use USBmodem and it allows me to receive phone
    calls while cruising the internet.
    Sure, you can receive a call while surfing, but once you answer the call, you can't be surfing at same time. One or the other.
    Many roadwarriors who have to be online and talking to their clients/employers at same time, came to us because they couldn't talk and surf at same time.
    After switching to dedicated EVDO data devices, these same users are what reported back to me, that in the same places where they could never see more than 600-700-900kbps, they were now getting 1000-1200+kbps downloads, making their life that much easier. Even faster downloads now that Rev-A data devices are available.
    I attribute the speed gain to better signal capture, and better data-processing ability of a laptop.
    here are a couple of links to enlighten:
    http://www.dslreports.com/mspeed?domains=1
    (shows fastest cellphone test results)
    http://www.dslreports.com/archive/spcsdns.net
    (shows fastest EVDO speeds)
    look for 'spcsdns.net', those are sprint test results. compare the two groups, and you tell me which got better results... phone or dedicated data device?
    i'll close by repeating what i said earlier. for those who need only infrequent data access, tethering is the way to go. but for the roadwarrior who needs fastest downloads and the ability to talk on phone at same time. get a phone and an EVDO data device like one of these:
    http://www.evdoinfo.com/component/option,com_wrapper/Itemid,117/
    PowerBook G4 - find me on ichat as EVDOalex   Mac OS X (10.4.8)   I work for 3Gstore.com/EVDOinfo.com & benefit from purchases at sites I link to.

  • Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?

    Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?

    Welcome to the Apple community.
    Does anyone have suggestions?
    Trash the spyware (Chrome) and use Safari.

  • I've just upgraded to IOS 7.0 on my iPhone 5 and the calendar is horrible!  I want to be able to see the who day at a glance not a few hours.  Does anyone have any suggestions?

    What's happened to the calendar in IOS 7.0?  I would like to be able to see the whole day at a glance not just a few hours.  Any suggestions?

    I know what it looks like and what it does.  I need to be able to see the whole day!  A few hours is not helpful for knowing whats ahead.  I don't want to scroll I just want to be able to look at a glance.  Does anyone have any helpful suggestions.

  • While saving a file, I have converted all my files to Pdf.  The only way to restore previous is to delete Adobe.  Does anyone have a soution?

    While saving a file, I have converted all my files to Pdf.  This made everything inaccessible, even Explorer.  I had to delete Adobe to get back to some of the previous files.  I tried to restore system to previous, but I kept getting a pop up message that said I did not have enough shadow space.  Does anyone have a solution?  Greatly appreciate your help.

    Application, file icons change to Acrobat/Reader icon

  • Updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

    updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

    I use a  windows 7 pro and have no problem like that from bridge cc when I select a thumbnail then use menu Tools>Photoshop>Image Processor..  I see Adobe Photoshop CC 2014 start up then I see the Image processor dialog and that one file is selected in the bridge I the complete the dialog and click run.  The image files are created. Photoshop remains open after the image files are create with no open documents. I need to click on the bridge in the task bar to bring bridge back into focus.
    What does you system configuration?

  • After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer. Does anyone have any advice on how to fix this issue?

    After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer and .mac account. Does anyone have any advice on how to fix this issue?

    Welcome to the Apple Community.
    Which OS are you using.

  • My phone is unable to make outgoing calls, receiving them and sending and receiving both SMS and IM are all ok? Anyone have solutions?

    I have an IPhone 4 , which is on a Vodafone network, when I try and make outgoing calls it says 'call failed' . I am still able to send/receive SMS and IM and receiving calls is also so problem, does anyone have any solutions?

    You need to contact Vodafone.

  • I have tried everything that is recommended by apple to get my ipod shuffle 4th gen to sync with itunes or even show up on my computer does anyone have suggestions?

    i have tried everything that is recommended by apple to get my ipod shuffle 4th gen to sync with itunes or even show up on my computer does anyone have suggestions?

    Hey Xxx_Dank_xxX,
    Have you ever been able to sync your iPod shuffle to iTunes on your computer, or has something recently occurred?  Are you working with a Mac or a PC?   Without knowing what has been recommended to you, I'm going to start here with the basics troubleshooting for this issue.
    iPod shuffle (4th generation): Not seen in iTunes - Apple Support
    https://support.apple.com/en-is/HT203407
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    https://support.apple.com/en-is/HT204095
    Regards,
    Judy

  • I have the latest photoshop cc 2014, but i dont see perspective warp in it, does anyone have an idea why

    I have the latest photoshop cc 2014, but i dont see perspective warp in it, does anyone have an idea why

    As you can see, its in Dutch, please comment

Maybe you are looking for

  • Safari will not open on mini Macintosh

    I have a mini Mac with Yosemite installed. Safari will not open and all I see is a coloured pinwheel. The only way out is to keep opening finder and force quit safari? I have similar set up with iPhone 5c and iPad mini neither has a problem. Apple su

  • Problème avec une mise à jour récente de photoshop CS6

    J'ai photoshop CS6 et une mise à jour récente m'a proposé photoshop CS6 extended. Je n'ai pas voulu de photoshop extended mais depuis je n'ai plus accès à ma version de photoshop CS6. Que dois-je faire pour me sortir de cette galère créée par ADOBE?

  • Trigger oscillosco​pe on specific I2C write?

    Apologies for cross posting this from the Automotive and Embedded forum but there just doesn't seem to be much "traffic" there (no pun intended) I did a search and only found about four posts that even mention I2C. Most are about CAN. My only experie

  • Timestamp comparission error

    hi, i have a table that stores the value as timestamp. Now how to compare two values ? as the fraction of a second is also stored . sales             salestime 0                 2009-11-30 11:20:26.0   112008        2009-11-30 11:37:56.156 in the abo

  • Unable to release 800 sales orders at one go in ByD

    Hi, We have 800 sales orders which are Preparation status. When we try to release all the 800 sales orders we have experienced system crash/dump twice roughly 11-12 mins into the process. At the end of the processing none of the sales orders got rele