Anyone have any luck on sequencing Itunes 12?

Hey everyone, I was wondering if anyone has had any success on sequencing itunes 12. I followed the instructions for iTunes 11 here:
http://stealthpuppy.com/sequencing-apple-itunes-11-with-app-v-5/
but, it didn't work properly.
One of the issues I have is that when you launch iTunes, you get the following message:
Thinking it was because the ipod server was not started, I went back and re-sequenced it from manual to automatic, still did not work.
Also, This is going to be used in a lab environment, so it needs to be FULLY setup, the webpage said not to run it, but, I did it anyway-didn't keep my settings.
any ideas?

Have you installed Apple Application Support and Apple Mobile Device Support on sequencer before sequencing and on the client PC before running the iTunes package?
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

Similar Messages

TS1363 I'vw tried everything here multiple times, anyone have any luck with another non-apple generated solution?

Any time I try to connect to itunes, windows recognizes the ipod, but it never comes up in itunes. When the bubble for "trust" or "dont trust" comes up, I tap trust. Then I hear the window sound for disconnecting something from a usb port. I tried all the apple solutions, nothing helped at all. Anyone have any ideas? I tried full restoring the ipod too, and now I've got an empty ipod that I cant connect to itunes....fantastic...

After having communicated with Bose extensively over the last two months I'm pretty sure there is no solution to this. Bose are not the only phones that exhibit this, but there are only a handful that do and they all support multi-link technology in BT 4.0. One theory is that in searching for other devices to link is what causes the skipping, but in none of these is there an option to turn off multi-link (which might be the solution).
The good news is that CES has introduced a TON of new BT headphones, and we'll see these come to market this spring. One or more of them may well work for folks (for audiophiles the best looking one so far is Sennhesier's Momentum series, already a respected model among wired sets, the BT version is getting excellent early reviews. But pricey). Unless you need something immediately my advice would be to wait a few months and see what comes out.
You are correct that Powerbeats have sync issues -- sync issues are common with bluetooth but some makers do better than others. My portable BT receivers, for example, have excellent sync across all apps. But as I noted above, this isn't a good solution for those on the go (pairing a portable BT receiver with otherwise wired phones -- although if folks are interested my new favorite is the Fidelio X2/27 model with these. Truly audiophile level sound, at a reasonable price. But not something I'd take out of the house :>).

Anyone have any luck with steam and wine

im trying to get any steam to work with wine and so far i've had no luck.
i have a 512 ATI RADEON X1600 graphics card and im using the open source ati driver.
have had some success with counterstrike 1.6. I start a game (local) but it is extremely choppy/laggy.
does anyone have any pointers on how to get it to run more smoothly?

I don't know how well the open source drivers are going to handle games, catalyst may work better but you will have to use the legacy driver (here) for an X1600, and it doesn't work with the most recent kernel.

Anyone have any luck Imaging a Lenovo T420 with ZEN 10?

I have a ZEN 10 server setup and got the latest (March 2011) BootCD.iso, but still am unable to image one of the New Lenovo T420 Laptops. Has anyone had any luck, or have a bootcd.iso that will work with them?
Thanks
Bill

Originally Posted by schoenb
I have a ZEN 10 server setup and got the latest (March 2011) BootCD.iso, but still am unable to image one of the New Lenovo T420 Laptops. Has anyone had any luck, or have a bootcd.iso that will work with them?
Thanks
Bill
Try this one: NOVELL: Downloads - ftf_zcm11_e1000e_1.3.10a.zip
Thomas

Anyone have any luck with the tascam 144?

i am buying a tascam 144 usb interface in about a week cus someone told me it worked well with garage band but now i am having second thoughts cus i have read that a lot of people have trouble getting garage band to recognize it. anyone got any advice?
also how do you turn the volume of a track up during the mastering process, without clipping, so that your song is as loud as a commercial cd?
thanks

don1212 wrote:
i am still a bit confused though
can someone explain how compression or limiting raises the volume cus a i am stil new : )
Compression is confusing, and people are often confused by what it does and how it works, so you’re not alone! It’s also used in a number of ways for different purposes, many of them “so that’s how they do that!” familiar, and others not so obvious. It’s been an essential part of the recording process throughout the history of recording, and great compressors, like great guitar amps, are sought-after pieces of gear.
To understand conceptually how compressors work to make things louder (which isn’t their only use, but is the topic of the thread), you need to understand the difference between peak and average levels. Average volume levels are what give you a sense of how loud the music is, peak levels are the occasional spike. A peak level may be so short, you barely perceive it.
When you raise the volume level on the whole track to the point just underneath clipping, it’s going to look to the peaks, and bring them up to the top of the volume scale. Everything else (and average levels) are going to be below that. If you tried to raise the volume any higher to get average levels higher – so it sounds louder – you would be lifting your peak levels into the clipping range. And clipping is bad.
So, the trick is to lower the volume on just the peaks so you can raise the volume on the entire track and make the average levels louder. Compression does that by kicking in above a threshold that you set (or is set in the preset), and lowering levels above that threshold by a certain ratio. If the settings are gentle, you may not notice it. If the settings are aggressive, you may not only notice it, but it can create ugly artifacts. In any case, above a certain threshold, it restrains the volume, taming the peaks.
After it tames the peaks (which may incidentally, be only a few imperceptible spikes) the audio flows into a “makeup gain” stage that’s essentially a volume knob. When first compressed, with reduced peaks, the track is no louder than it was before – and with lower peaks may even be softer. However, with the lowered peaks, the makeup gain stage is able to raise the overall volume higher than before, since (if you can picture it) there’s less distance between the new shorter peaks, and where most of the song volume lives below them. So first the compressor squashes the peaks, then the makeup gain can bring everything up... even higher.
Turning off normalize is kind of a “cheat” because it works by allowing you to bring the peaks into clipping (and therefore raise the overall level). In other words, rather than tame the peaks, you let them clip. Because some songs (and people) will tolerate some clipping, it’s a fast and easy way to raise the volume. Artful use of compression and limiting (which is extreme compression above a certain threshold) can get you to the same place without clipping.
Compressors are also often used on voice and instruments to “fatten them up” where the goal isn’t necessarily to make things louder, but to make things sound fuller by lifting up the low-level stuff that might be otherwise inaudible.
Compressors are not without their price. If you overuse a compressor, the dynamic range can be squashed into lifelessness. Also (and particularly with bad compressors), you can sometimes hear the action of the compressor when it kicks in above a certain threshold, and when it releases below it, what's called "pumping."
You might want to check out some other sites on the net to really understand the concept because once you understand it, you can use it to shape the sound of your tracks in powerful ways, and avoid pitfalls.
But I wouldn’t worry about it too much! Understand it as much as you can, but if you just dive in and do it, and use your ears to determine what sounds good or bad to you, you can learn by doing pretty quick.

Anyone have any luck with merging libraries?

i'm merging two itunes libraries.
trying not to create duplicates, but i think this is impossible.
so i am going to use the view duplicates option and then click date added.
i'll let you know how it works, but if anyone can help with anything faster, please let me know.

I'm having some problems migrating from JRE1.3.1 based JavaBean-ActiveX control. There were non-trivial changes required for EventDescriptor for the events thrown by the bean. However after successfully creating 1.4.2 based ActiveX control, I'm getting following exception:
java.lang.IllegalArgumentException: java.lang.ClassFormatError: $Proxy1 (Repetitive
interface name)
     at java.lang.reflect.Proxy.getProxyClass(Unknown Source)
     at java.lang.reflect.Proxy.newProxyInstance(Unknown Source)
     at sun.plugin.com.event.ListenerProxy.register(Unknown Source)
     at sun.plugin.viewer.AxBridgeObject.statusChanged(Unknown Source)
     at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Any thoughts about what might be causing this sort of exception.
Thanks.

Anyone have any luck installing the PCI-8212 in a Dell PC w/ NT 4.0 and the new PCI 66MHz/64 bit bus?

NI-488.2 ver 1.7 won't reconginize the card. I got the card to work in an older PC with the original PCI bus. NI's answer was to use a different OS like Win 98. The application I'm using requires NT 4.0. Any suggestions? I followed the installation procedures exactly on a fresh install of NT brought up to SP6 and IE5.5.

Matt,
Do you have another computer that you can try the PCI-8212 in? That
should tell you whether or not is is a problem with the card.
Matt Klabnik wrote:
>
> Ethernet worked fine.
>
> No error message. When I went to activate it in the GPIB control panel
> the serial number field remained grayed out.
>
> I gave up and bought Win2K. I'm not sure my application supports Win2K
> yet, so I may still need to fall back to NT 4.0.
>
> BTW, the machine is a Dell PowerEdge 1550 1U Server. PIII 866, 512MB
> RAM, 3 x 18GB configured as RAID 5.

Does anyone have any idea of why itunes uses 50% and Apple mobile device uses anther 50% computer usage ?

When I plug in my iphone my CPU goes to 100%. 50% itunes and 50% Apple mobile device. when trying to shut down, MD crash report uses 50% CPU

Since upgrading to iTunes 10.5....which doesn't work correctly yet....Apple Mobile Devices Services is typically running at 50% or greater
Did you gettting any answers????

Anyone have any luck importing native from Canon XF305 camcorder?

I am running Lion and FCP X 10.0.5........Wonder if anyone has a recommendation for cleanest situation other
than native if they have been using it with X allready
Many thanks

I'm importing from XF cameras as we speak.
Here's the problem I'm trying to work around though.....
My understanding was that FCP X could import footage 'in the background' while you get to edit.
Hmmm..... well, to a certain extrent it can, as in you can keyword etc, but if you even think about skimming over some footage, set in/out or add anything to the timeline then importing pauses.
Am I missing something fundamental here? This is not what I call importing in the background.
Ideas?

Anyone have any luck getting a photo editing program for 10.9.1 ? (other than iPHOTO / Aperature)

I was using Elements 11 with Mountain Lion and that was OK but the reviews for Elements 12 compatability with 10.9 are all pretty bad. The folks at Adobe claim that Elements 12 "can be installed" on 10.9.1 but they dont actually state that it "works". I'm just trying to avoid spending the big bucks for the full Photoshop program and Im not even sure that would work either. I have this great new iMAC and cant play around with it yet. Suggestions ?

I have used all of the following on Maversicks, with no issues at all:
iPhoto
Aperture
Acorn
Graphic Converter
Intensify Pro
Snapheal
I've not seen any reports indicating any issues with other apps either. I would strongly echo Larry's comments about App Store reviews, and reviews on download sites and forums up and down the internet. The great thing about the internet is that everyone has an opinion, that might also be the worst thing.
The problems with these comments are manifold: for a start, happy people are less likely to review, unhappy happy are much more inclined to. That's why we don't have thousands and thousands of posts on this forum from all the people who have no problems saying "look I have no problems". Unhappy people get cross and are more likely to express that anger in negative reviews.
Then what about the reviewer? What is his or her knowledge, experience and skill level? No doubt they are having problems, and real ones, but how do you know if their issues are problems with the app, their own inexperience, third party conflicts and so on. I've seen people on here claim the fact that iPhoto won't edit video is a bug. I've seen hundreds and hundreds of posts from folks on here who are certain they've found a bug, only for their glitch to be resolved. No review is worth anything unless you know something of the reviewer, his or her knowledge and experience.
So frankly, I never bother with those reviews on any such stores, not just iPhoto on the Mac App Store.

Anyone have any luck finding a messenger bag that fits a Y70

So I bought a Y70 and I love it, but for the life of me, I cant find a messenger bag on amazon that is actually large enough to hold it and a charger and a few accessories. I can only find the one Lenovo recommends, and while it does hold the laptop, I dont really care for its ability to carry much else. Everyone keeps suggesting the timbuck2 classic bag in extra large, but it seems they do not make it anymore. Any input would be awesome.

Hi TheMuffinOfEvil,
Welcome to Lenovo Community Forums!
You may want to take a look a this
http://www.ebay.com/itm/Backpack-Messenger-Bag-for-HP-ENVY-17-3-Inch-Lenovo-Y70-17-3-Laptop-Black-Purple-/361148392099
http://www.ebay.com/itm/Hybrid-Carry-Messenger-Bag-Laptop-Backpack-for-Lenovo-IdeaPad-Y70-17-3-Notebook-/151521528573
Hope this helps
Cheers!

I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?

I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?

First, for the forum view issue. Go to My Settings (on the right) and in General Settings change the Topic Page View to Flat. Click Save. Posts should show up in the order they were written.
Have you seen this?
http://docs.info.apple.com/article.html?artnum=93764
Also, since you said that you've gone through the 5 Rs, I would assume that you used the iPod Updater to restore (since there is no other way of doing it and you don't "run" the 5 Rs).
When you restored, did you use the latest updater?
You may also want to try formatting the iPod through Windows. Connect it to the computer and when it appears in My Computer right click it and go to format. Does anything happen? Can you format the iPod through Windows?
btabz

I have tried to update the itunes to the new version, and it keeps trying to download to drive E! It doesn't give me any options to change it either, does anyone have any suggestions?!

I have tried to install the newest itunes and when its done downloading and trying to install, it tries to go to drive E, which is a disk drive. It gives no options to change it and I have tried about 6 times in the last 2 days! anyone have any suggestions?!?!

It says:
iTunes Installer completed
Errors occured during installation iTunes could be configured.
Your system has not been modified. To complete the installation, run the installer again.
Click Finish to exit the installer.
I dont know what to do next. Everything I try doesnt help it any. I really want to put music on my iPod but I cant!

I am trying to download an album from ITUNES and I keep getting a "session has timed out" message with no further option but to try again. I get the same results. Anyone have any ideas?

I am trying to download and album off ITUNES but when I get to the billing site and attempt to purchase it, it gives me a message saying "Your Session has timed out." It gives me no other option that to try again and I just keep getting the same results. Anyone have any ideas on what I can do?

Hi, Kenny.
Thank you for visiting Apple Support Communities.
There are a couple things that I would recommend trying. Try closing all open applications and power cycle the device. Next, go through the section labeled Troubleshoot issues on an iPhone, iPad, or iPod touch in the second article below. If the issue persists, try completely signing out of the iTunes Store on the iOS device and sign back in. Be sure to test downloading an application after each step.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Cheers,
Jason H.

ITunes will not download on my 64bit lap top. I have tried 6 times to download it.Does anyone have any ideas for this issue?

I have tried 6 times to download itunes on my 64bit lap top. I keep getting error messages, and I have disabled the pop up blockers still nothing. Does anyone have any ideas?

What do the error messages say? (Precise text, please.)

Anyone have any luck on sequencing Itunes 12?

Similar Messages

Maybe you are looking for