Anyone have any recommendations for where to buy additional Pages templates?

Anyone have any recommendations for where to buy additional Pages templates?

http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=9&sid=d1c6417d261e6e df4d03989b9999cb24&mforum=iworktipsntrick
Peter

Similar Messages

  • Anyone have any recommendations for a secondary display?

    I would like the 20" cinema display from apple, but I wasn't sure if it was worth the price. I know through Amazon.com, I can get it for 719.99 (no tax and free shipping). Is there a place where I could get it cheaper? Or any recommendations on other brands?

    I did consider a 20" Apple but one day I happened to have a look at Dell's site just out of curiosity and I am now saving up for a Dell 24". Dell offers much more functionality with its displays. Sure they're not as pretty as Apple's displays, but IMHO they have better specs for money. A lot of Mac users have made good reports re: using Dell displays with their Macs.
    p53

  • I have an iPod Nano 6th Generation for just over three months and the down volume button is sticking.  Does anyone have a recommendation for resolving?

    I have an iPod Nano 6th Generation for just over three months and the down volume button is sticking.  Does anyone have a recommendation for resolving?

    Dont buy this model again, this is the most common problem and i have gone through 4 of these 6th gen nanos all with the same problem.  You can find youtube videos that show you how to fix it yourself but you run the risk of breaking your ipod, also opening the ipod voids any warrently.

  • Does anyone have any suggestions for Ad blocking? I'm getting a lot of pop up ads while using Facebook from Safari.

           I'm getting a lot of pop up ads. mostly while using  Facebook. I'm running Safari on a Macbook Pro running Yosemite. Does anyone have any suggestions for an Ad blocker. I don't see anything in the App store.
          I can't swear to it but I don't recall this being a problem pre-Yosemite. I could be wrong. I haven't been real active on Facebook until recently. I see some third party apps out there but am alway wary of non approved software.
         Thanks
         Ron

    You may have installed the "VSearch" trojan. Remove it as follows.
    Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo.  It came with iMovie ver. 9.0.5 installed.  I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips.  Does anyone have any suggestions for a reasonably pri

    I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo.  It came with iMovie ver. 9.0.5 installed.  I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips.  Does anyone have any suggestions for a reasonably price camcorder that would work with my setup?
    Thanks in advance for any suggestions.

    I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo.  It came with iMovie ver. 9.0.5 installed.  I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips.  Does anyone have any suggestions for a reasonably price camcorder that would work with my setup?
    Thanks in advance for any suggestions.

  • Does anyone have any suggestions for password protecting e-mail on the i pad?

    Does anyone have any suggestions for password protecting e-mail on the i pad?  Other people sometimes want to use my i pad but I don't want them to have access to my e-mail (which is on AOL)
    Presently you can password protect the whole i pad by having to put in a 4 digit code to open it, but once it's open whoever is using it has access to everything you have on it.

    Skydiver...that did it!!  I shut the mail app from automatically opening and now I can sign onto my AOL acct. through Safari!!  I had called Apple Care and had asked  different peope in Apple stores about this and no one but you had any suggestions!  YAY!!  Thanks!!!

  • I started to have connectivity issues with a linksys router.  The linksys rep suggested ...Check from Apple if they have some particular ports for the Apple TV that we might need to open on the router, anyone have any suggestions for this?

    I started to have connectivity issues with a linksys router.  The linksys rep suggested ...Check from Apple if they have some particular ports for the Apple TV that we might need to open on the router, anyone have any suggestions for this?

    Hi RonWM,
    Thanks for visiting Apple Support Communities.
    This article lists the ports that are used by the Apple TV:
    Apple TV: TCP and UDP ports and protocols used
    http://support.apple.com/kb/HT2463
    Best Regards,
    Jeremy

  • I am having trouble using reverb of any kind; it does not sound natural, but rather "pixilated." Does anyone have any ideas for a solution? I have used Silververb and Space Designer and am having the same problem...

    I am using Logic Pro 9 with two MXL 990 microphones in my piano and a Rode NT1A for vocals. I have tried recording with added reverb and keeping getting not a natural reverb sound, but a rather "pixilated" one that does not sound natural. Does anyone have any ideas on how to solve this issue? I have tried using Silververb and Space Designer, and both result in the same problems. Thank you!

    This is asking for the impossible! It does not sound natural because maybe it isn't and in judging so whats your reference anyway. If you are in dire need of some natural sounding room you can go and record it yourself. But even then, the chances that it sounds like you imagined it, are very slim.
    There are very decent sounding reverberation plugins, based on artificial reverb generators or convolution-style, the last one is said to sound more 'natural' then the first one. Be it as it maybe, it really is like cooking food. You got all the ingredients for this delicious taste at hand and believe it or not to reach a satisfying result this is not enough, because if you do not mix the ingredients in the right proportion you will end up with a different dish you thought you'll get. This is exactly the same when one would mix audio, I dare say.
    So treat yourself to some good ingredients and the rest is up to you, namely: taste and experience!
    And looking at some of my past music productions I always find the same plugins for the 'ambient' task:
    Altiverb by Audio Ease when I have acoustic ensembles (classical music mostly), the Sony Oxford Reverb in studio productions, Bricasti when I have to deal with drums and MMultiBandReverb from MeldaProduction for all-round stuff. Thats the base I start from, after that I can end up with dozen Reverb plugins which basically all are doing the same thing but just in a tiny different way.

  • ITunes will not download on my 64bit lap top. I have tried 6 times to download it.Does anyone have any ideas for this issue?

    I have tried 6 times to download itunes on my 64bit lap top. I keep getting error messages, and I have disabled the pop up blockers still nothing. Does anyone have any ideas?

    What do the error messages say? (Precise text, please.)

  • Does anyone know how to customize a Site page on SharePoint 2013? Also does anyone have any recommendations on course to take to learn this?

    Hello All,
    I am new to using the 2013 SharePoint and want to customize the site pages that was set up by someone else. The problem is when i click on the site pages I only see the option to upload and new. So the pages that have been uploaded in the past i clicked
    on them and when they come up it just shows the title of the site page with edit links button on the top.  
    So basically you are not able to do anything. Does anyone know if this is a permissions issue and if it is how do i give myself admin rights
    Nexusxox

    Hi,
    From your description, you want to know how to edit a page in SharePoint 2013.
    Go to the page->click Settings->Edit page,refer to the following screenshot:
    If a user want to edit a page, he at least have edit permissions.
    If you have any problems, please don't hesitate to let me know.
    Best Regards,
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Anyone have any suggestions for additions or changes to the FAQ list?

    Does anyone have anything that they'd like to see added or changed in this forum's FAQ list?

    Todd_Kopriva wrote:
    Does anyone have anything that they'd like to see added or changed in this forum's FAQ list?
    This may be worth a pointer:
    In some circumstances, like in my case where I had AE installed and due to a problem with Itunes I was advised to uninstall and re-install quicktime.  After doing so, when starting AE it reports that it cannot find a compatible version of quicktime and will have to turn off quicktime functions.
    I found out it is caused by the  file `QTCF.dll', not being in AEs' support files.   The cure is to find that file in quicktimes installed folder and move it to AE support files.
    Full details and paths etc can be found in this explanatory
         thread
    on creativecow
    PS - That thead references CS3 but I had the problem on CS4 and the same cure worked for me.

  • Hi I am upgrading to the new MacBook Pro 13inch. I am trying to decide whetherr to get the MS Office for Mac 2011 or iWork 09.  Does anyone have any recommendations?  Cheers

    As per title above

    Choose if:
    MS OfficeMac - $$
    If you need to keep your Office skills up to remain employable and/or exchanging some files with Windows Office users.
    99% of the business world uses Office on Windows PC's. Copy protected.
    If you are constantly exchanging files with Windows users, it's better to use Windows because of formatting and slight differences between the Win Office and OfficeMac versions, fonts etc. You can then choose to install Windows onto your Mac in a virtual machine program, then run Win Office in that, BootCamp or just get a Windows PC and Office.
    Windows in BootCamp or Virtual Machine?
    iWork -$$
    If you plan to remain totally in the limited 6% Mac market share  environment with little file exchange options with Windows/Linux users. Copy protected.
    LibreOffice - free
    A donationware suite of office programs like Office that accepts Office files, cross platform (Linux, OS X and Windows) that offers maximum compatibility, only fonts and formatting could be thrown off a little between platforms. Not copy protected, open source software.
    If you wish to be able to open and access dam near anything from Windows users without paying for OfficeMac, don't need 100% or near 100% compatibility with Windows Office, then this is a excellent choice.
    If you ever should need to send a LibreOffice file to someone else to edit or alter, you can also send the appropriate OS copy of the installer package and it will cost them nothing to use.

  • Anyone have any ideas for Graphic Upgrades?

    I do relize that the Graphic cards are built into the mother board. However, is there any other solution? I as of this moment have a 32VRAM card. I'm crossing my fingures I can upgrade. Any suggestions?
    Thanks

    Sorry, but there are simply no options for upgrading your graphics card in your iMac. The best you can do - other than buy a new one of course - is to get a newer model as a refurb or from eBay.

  • HT4356 I have a HP 4500, anyone have any suggestions for printing.

    I would like to use my iPad to print from my wireless HP 4500 printer.

    Rufus Cat-
    Even if it was compatible, AirPrint does not work through a USB link, only Ethernet or WiFi.
    I do not see your HP 4500 listed on Apple's list of AirPrint compatible printers.  <iOS: AirPrint 101>  Therefore you need to take another approach.  To start, I suggest you download the free HP App, ePrint Home & Biz.  It has limitations, but should get you printing with your existing setup.
    There are other printing Apps with more features such as Print n Share and PrintCentral, but they can only be accessed from within other Apps that have the "Open In" option.
    Your best option may be to share your computer's printer as AirPrint over WiFi.  Programs that are reported to do that well are Printopia and FingerPrint.  Your computer must be on and awake any time you want to print.  <Printopia for Macintosh>  <FingerPrint for PC and Mac>
    Fred

  • Bonjour Services for Airserver isnt being recognized on my new PC Laptop running Windows 8.  Does anyone have any solution for this

    I am having trouble with Airserver not finding Bonjour or Windows  I have installed and repaired Bonjour and it still does ot reconize it.
    error message is
    AirServer requires Apple Bonjour to provide automatic discovery of your PC. Apple Bonjour can be installed by either Installing Itunes o by installing Bonjour Print Services for Windows.
    I have the latest Itunes and the latest Bonjour.
    Can anyone help on this.  Thanks.

    I am having trouble with Airserver not finding Bonjour or Windows  I have installed and repaired Bonjour and it still does ot reconize it.
    error message is
    AirServer requires Apple Bonjour to provide automatic discovery of your PC. Apple Bonjour can be installed by either Installing Itunes o by installing Bonjour Print Services for Windows.
    I have the latest Itunes and the latest Bonjour.
    Can anyone help on this.  Thanks.

Maybe you are looking for