Anyone have any suggestions for additions or changes to the FAQ list?
Does anyone have anything that they'd like to see added or changed in this forum's FAQ list?
Todd_Kopriva wrote:
Does anyone have anything that they'd like to see added or changed in this forum's FAQ list?
This may be worth a pointer:
In some circumstances, like in my case where I had AE installed and due to a problem with Itunes I was advised to uninstall and re-install quicktime. After doing so, when starting AE it reports that it cannot find a compatible version of quicktime and will have to turn off quicktime functions.
I found out it is caused by the file `QTCF.dll', not being in AEs' support files. The cure is to find that file in quicktimes installed folder and move it to AE support files.
Full details and paths etc can be found in this explanatory
thread
on creativecow
PS - That thead references CS3 but I had the problem on CS4 and the same cure worked for me.
Similar Messages
-
I'm getting a lot of pop up ads. mostly while using Facebook. I'm running Safari on a Macbook Pro running Yosemite. Does anyone have any suggestions for an Ad blocker. I don't see anything in the App store.
I can't swear to it but I don't recall this being a problem pre-Yosemite. I could be wrong. I haven't been real active on Facebook until recently. I see some third party apps out there but am alway wary of non approved software.
Thanks
RonYou may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo. It came with iMovie ver. 9.0.5 installed. I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips. Does anyone have any suggestions for a reasonably price camcorder that would work with my setup?
Thanks in advance for any suggestions.I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo. It came with iMovie ver. 9.0.5 installed. I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips. Does anyone have any suggestions for a reasonably price camcorder that would work with my setup?
Thanks in advance for any suggestions. -
Does anyone have any suggestions for password protecting e-mail on the i pad?
Does anyone have any suggestions for password protecting e-mail on the i pad? Other people sometimes want to use my i pad but I don't want them to have access to my e-mail (which is on AOL)
Presently you can password protect the whole i pad by having to put in a 4 digit code to open it, but once it's open whoever is using it has access to everything you have on it.Skydiver...that did it!! I shut the mail app from automatically opening and now I can sign onto my AOL acct. through Safari!! I had called Apple Care and had asked different peope in Apple stores about this and no one but you had any suggestions! YAY!! Thanks!!!
-
I started to have connectivity issues with a linksys router. The linksys rep suggested ...Check from Apple if they have some particular ports for the Apple TV that we might need to open on the router, anyone have any suggestions for this?
Hi RonWM,
Thanks for visiting Apple Support Communities.
This article lists the ports that are used by the Apple TV:
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Best Regards,
Jeremy -
My iworks is not working?? Does it anyone have any suggestions as to how to fix the problem?
It won't let me open my numbers, pages or keynote. Does anyone have any suggestions as to how i can fix the problem?
I am having the same issue. And today, I noticed that when I was talking on the phone, the volume went down low. I had to reboot the phone, so that the volume was up again. Mostly, though, it's my music that I am having issues with.
Same issue as listed above. iPhone 4S. IOS6. -
Could you just look at this vi and tell me if i am doing anything wrong? I get errors that are different each time I change something. here are the inputs I am using
Output Side:
amplitude = 1
freuency = 50kHz
Sampling Frequency = 1MHz
3 of Samples = 200
Input Side:
Input Buffer 4000
trigger type = analog
pretrigger = 5
edge or slope = rising
scan rate = 500kHz
# of scans = 2000
Conditional Retrieval
mode = on
slope = rising
skip count = 0
level = .1
offset = 0
hysteresis = 0
So what we want to do is capture the ten
cycles of the 50k output pulse on the input and need to store that so we can plot it later, do you have any suggestions. we are using the PCI-MIO- 16E board.
Thanks,
Jarrod
Attachments:
InputOutput2.vi 88 KB1) Toss the sequence frames (no flames please).
2) Set you read and have it ready to trigger before oing the output.
3) After the output, go back and read the data that is waiting for you.
4) If you have errors tell us what they are and under what conditions they occured.
End of Ben's suggestions for now.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
HT4356 I have a HP 4500, anyone have any suggestions for printing.
I would like to use my iPad to print from my wireless HP 4500 printer.
Rufus Cat-
Even if it was compatible, AirPrint does not work through a USB link, only Ethernet or WiFi.
I do not see your HP 4500 listed on Apple's list of AirPrint compatible printers. <iOS: AirPrint 101> Therefore you need to take another approach. To start, I suggest you download the free HP App, ePrint Home & Biz. It has limitations, but should get you printing with your existing setup.
There are other printing Apps with more features such as Print n Share and PrintCentral, but they can only be accessed from within other Apps that have the "Open In" option.
Your best option may be to share your computer's printer as AirPrint over WiFi. Programs that are reported to do that well are Printopia and FingerPrint. Your computer must be on and awake any time you want to print. <Printopia for Macintosh> <FingerPrint for PC and Mac>
Fred -
I am trying to restore my phone through itunes and am unable to, due to a "1604" error. Can anyone please advise on a fix?
http://support.apple.com/kb/TS3694#error1604
-
I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?
Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out. -
I have tried to install the newest itunes and when its done downloading and trying to install, it tries to go to drive E, which is a disk drive. It gives no options to change it and I have tried about 6 times in the last 2 days! anyone have any suggestions?!?!
It says:
iTunes Installer completed
Errors occured during installation iTunes could be configured.
Your system has not been modified. To complete the installation, run the installer again.
Click Finish to exit the installer.
I dont know what to do next. Everything I try doesnt help it any. I really want to put music on my iPod but I cant! -
I am a guy and i am looking at buying an ipod touch 5, i do not know what color i should get, does anyone have any suggestions on what ipod touch colors are best for guys?
The Product Red model
-
Preview asking for user password on PDF file. There is no password. Anyone have any suggestions?
Preview asking for user password on PDF file. There is no password. Anyone have any suggestions?
OK. Open your PDF with Preview and at the top of the window (near the file's title) you will see Locked in grey.
Click on it and in the menu that appears click Unlock.
It looks like this in OS 10.7.3 :
For information you can view the permissions of a PDF file in Preview by choosing in the menu bar Tools > Inspector, and then click Encryption (the lock).
Hope this will help. -
Bought an ipad 2 for christmas but it won't connect to my wireless. My modem/router is an Arris 653 B eurospec DOCSIS. The wifi works on an unsecured network I have in the bldg but not my own network. Anyone have any suggestions?
I'm not familiar with your router but are there any buttons on the front or back of it because sometimes you need to pair the router in order for your PC, laptop, phone or iPad to connect wirelessly with it?
From the routers I have used there are normally two buttons on the front or back (apart from the power button), pressing one of them allows you a few minutes to enter the required password on your iPad. Best look at the instructions for the router. -
Today, after having published my website without difficulty for years, I got an error message saying that the file format was unrocognized. Anyone have any suggestions.
You need to give some more info.
How are you publishing your site - iWeb FTP or another application? If the latter, is the encoding set to Unicode (UTF-8)?
Who is giving you this message - the server?
Maybe you are looking for
-
Hi, I hope that I can explain my problem briefly and clearly. An existing report is based on an sql folder that includes a 9 digit field - Program. This Program field now has a Father which includes the first two digits followed by 7 zeroes. There is
-
Oracle 10g Clusterware installation
Hi, I am installing Oracle Clusterware 10.2.0.1 on LINUX RHEL 5 on Virtualbox. I can't seem to get out of the problem in running the root.sh during the installation. Below is my error. Setting the permissions on OCR backup directory Setting up NS dir
-
Hi there, i am a jsp novice and i am looking to generate chart using data in a dbase. can anyone point me in the right direction how to use JChart(in jsp) to generate chart from a database? I am looking to generate Barcharts and Line charts. it is my
-
Facebook pop sound doesn't work
I have a Galaxy S4 and the notification sound hasn't worked in a while. Is this for everyone? Or just me?
-
Doing an internal Mac adjustment for reading/writing to NTFS HD
I am doing an internal setup using Terminal to allow my MacBook Pro 13(late 2012) OS X 10.8 to be able to read/write from a Seagate Backup Plus external HD that is formatted in NTFS. I have seen the instructions given from this site: http://www.avio