Anyone have definitive config for Neo2 Platinum and Speedfan

I've read almost equivalent posting indicating different info for Temp 1, 2, and 3.
I've got Temp 1 = NB, Temp 2 = CPU, Temp 3 = System.
based on my readings (NB = 14C, CPU = 38C, and System = 34C) the above makes sense.  But many people say Temp 3 is the CPU.  I can't believe my CPU would be cooler then my system temp, although, I guess it depends on where that temp is read from?
Can anyone confirm 100%?
What about Fans 1, 2, and 3?  How do those corrolate to CPU, NB, and SYSFAN and SYSFAN2 on the mobo?
I also have a "Temp" that reads constant -1 C and shows as part of nForce2 SMBUS. What's that?
ALso with the fans, Fan 4 and 5 showing as part of nForce2 SMBUS with no readings.  What's with those?

Quote
Originally posted by syar2003
16C heh .. means that speedfan does do the readout correctly.
It's just not possible with air cooling that something is lower than ambient temperature. (mine is 30C with a self mounted small fan on the chipset running at 4300rpm , this is about 5C over ambient temperature)
corecentre reads theese two sensors data right .
So does MBM5 5.3.7.0 is setup with wizard and right motherboard chosen.
Make sure that speedfan is setup to monitor :
Sensor Type - Winbond W83627THF  (through ISA 290h)
Sensors winbond1 , winbond2-diode
Edit : From your first post :
CPU = 38C, and System = 34C
This is the two real connected sensors , the other with 14/16C is just a bogus reading.
Your last comment, that doesn't make sense with your other posts, because the temp sensors giving me the 34/38 readings are 2 and 3.  Well you say only #1/#2 are tied to Winbond with 1=NB and 2=CPU.  Well how is it that #1 is giving me bogus readings in Smartfan then?
I looked at the config for the Winbond, sensor 1 = thermistor diode, 2 = PII diode, and 3 = thermistor diode.  THis is the defaults it came up with.  Is this incorrect?  If I change these settings at all I get some 110+ readings.

Similar Messages

  • Worried (Need advice on psus) for Neo2 Platinum and other bits

    Hi there again,i have this psu which is unused and is still boxed
    Antec TruePower550 uk version
    http://www.antec.com/uk/support_pro...p?ProdID=07551#
    i plan to use in this system the following:
    2x Vantec TD9238H Tornado 92mm fans
    BFG 6800 Ultra OC (agp)
    Athlon 64 4000+ (E4 version)
    Ricoh mp51225a dvdrom /dvd burner
    2x 1gb ddr400 (unshure of which brand yet)
    1 floopy drive
    some kind of Creative labs pci sound card(dunno yet)
    80GB SeaGate drive ide
    Neo2 Platinum mobo
    Atx case (unshure yet)
    im sorry if im asking lots of qestions as im a complete newbie at building anything and this will be my first built system from scratch, will my current psu be ok or will i need something better, if so could anybody advice me please on diffrent psu please
    Many thanks Blackrat7768

    Hi,
    Since your link does not work, don´t know which model you are referring to, but either way both models should do the job nicely for you.
    Truepower version 1 ( ATX 1.3 - 30amp single 12v rail with 20pin powerconnector )
    http://www.antec.com/us/productDetails.php?ProdID=20550
    Truepower version 2 ( ATX 2.x - 19+19amps dual 12v rails with 24/20 pin powerconnector )
    http://www.antec.com/uk/productDetails.php?ProdID=17551
    High power case-fans, usually are best to connect directly to a PSU 4-pin molex and not to the MoBo 3-pin connectors, which sometimes could overload the motherboard electrical circuit and give bootproblems or worse.

  • MSI K8N Neo2 Platinum and Speedfan configuration

    I'm hoping someone else with a similar K8N Neo2 setup can compare Speedfan notes with me. I'm trying to figure out what maps to what, here's my best guess. Let me know if your best guess differs.
    Temp1: System / Case temp
    Temp2: CPU
    Temp3: Northbridge
    Local Temp: CPU Socket sensor
    Remote Temp: nvidia 6800 GT GPU sensor
    Fan1: Northbridge
    Fan2: CPU
    Fan3: no sensor
    PWM1: Fan1/Northbridge speed control
    PWM2: Fan2/CPU speed control
    PWM3: Any ideas? I'm hoping this controls voltage for at least ONE of the fan headers on the motherboard, so I can control my case fans. If anyone knows, please fill me in.
    Thanks!
    Rich

    C'mon people, doesn't anyone have more info about this subject? I have everything figured out but speed03 and or fan03. I can not seem to control my case fans, only my CPU and northbridge work. I have 2 of my case fans plugged into the mobo and are reading 2700rpms but I can't slow or speed them up no matter what I do. It would be nice to have the system fan controlled my case temps just like the CPU fan is
    Is ther something in bios I have to enable or something?

  • Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.

    Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
    I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
    In the problem report, this is the error that stood out:
    Crashed Thread:  8  Dispatch queue: com.apple.iad.iadidmanager
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090

    Hi there navicin79,
    You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
    Troubleshooting iTunes installation on Mac OS X
    http://support.apple.com/kb/ht2311
    OS X Mavericks: If an app freezes or quits unexpectedly
    http://support.apple.com/kb/PH13975
    -Griff W. 

  • Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud? I find iCal to be poorly designed and not very efficient.

    Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud so it works on the iPhone and the Macbook? I find iCal to be poorly designed and not very efficient. I waste a lot of time entering information because you can't go to a specific day and enter information, nor can you navigate between months and add information on a specific date by clicking on the date. You can't easily scroll month-to-month and once you do by scrolling through nine months to get to where you want to be, you cannot enter information by clicking on a specific day in the month and entering information. I just called Apple and they verified that this is the way it works. You cannot go to a date and enter information, you keep getting thrown back to today and then you have to go into the calendar and change it manually on the screen. It is just not efficient.

    APC, CyberPower are reliable.
    Look for 1500VA. As example:
    APC
    http://www.amazon.co.uk/APC-Back-UPS-Pro-1500-Connector/dp/B0041MP81Y/
    Cyperpower:
    http://www.amazon.co.uk/Dell-CyberPower-Intelligent-LCD-1500VA/dp/B005DL5L50/

  • I am using photoshop cc 2014.2 And when I use save for Web it gives me a dialog box that says it is using Latin characters I've never seen this before. Does anyone have an answer for this problem or do I need to go back to the older version of Photoshop.

    I'm using Photoshop cc 2014.21 I you save for Web and dialog box comes up that says that Photoshop is using Latin characters and that servers cannot recognize Latin characters in webpages and you may have trouble viewing these pages does anyone have an answer for this problem?

    What Firefox version is currently installed on the computer?
    You can find the full version of the current current Firefox release (37.0.2) in all languages and all operating systems here:
    *https://www.mozilla.org/en-US/firefox/all/
    If you have a very old Firefox version then you could consider to uninstall that version to clean up existing registry keys (especial the uninstall key).
    Make sure NOT to remove "personal data" when you uninstall Firefox, because that will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
    Check the Firefox program folder and remove the Firefox program folder if there are still files left in it.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo.  It came with iMovie ver. 9.0.5 installed.  I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips.  Does anyone have any suggestions for a reasonably pri

    I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo.  It came with iMovie ver. 9.0.5 installed.  I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips.  Does anyone have any suggestions for a reasonably price camcorder that would work with my setup?
    Thanks in advance for any suggestions.

    I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo.  It came with iMovie ver. 9.0.5 installed.  I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips.  Does anyone have any suggestions for a reasonably price camcorder that would work with my setup?
    Thanks in advance for any suggestions.

  • Since I have connected my iPad with the MacBook through ICloud I have problems in Preview of opening PDF- and JPG-files. Does anyone have a solution for this?

    Since I have connected my iPad with the MacBook through ICloud I have problems in Preview of opening PDF- and JPG-files. Does anyone have a solution for this?

    I'm not sure I understand the connection between iCloud and this problem.  Is it simply a problem of coincidental timing (ie, the problem happened after you set up iCloud)?  If so, there's almost certainly no connection between these two events.
    Where are you getting the files you're trying to open, and what specifically happens when you try to open them?

  • HT5463 I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

    I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

    Do Not Disturb and Notifications
    Push notifications appear in Notification Center and alert you to new information, even when the
    associated app isn’t running. Notifications vary by app, but may include text or sound alerts, and
    a numbered badge on the app icon on the Home screen.
    Turn off all notifications: Go to Settings and turn on Do Not Disturb. When it’s turned on and
    iPhone is locked, all notifications and calls are silenced, but alarms will still sound. You can set the
    following options in Settings > Notifications > Do Not Disturb:
    • Automatically turn on Do Not Disturb: Set the starting and ending hours for when you don’t
    want to be disturbed. iPhone turns on Do Not Disturb during these hours each day.
    • Allow some phone calls during Do Not Disturb: When Do Not Disturb is on, calls are silently sent
    to voice mail. To allow some callers to ring through, tap Allow Calls From. You can allow calls
    from your Favorites list or other Contacts groups you define. For information about Favorites,
    see Chapter 25, Contacts, on page 100.
    • Allow persistant callers to ring through: Turn on Repeated Calls. If the same caller (based on
    their Caller ID) calls you twice within three minutes, iPhone will ring.
    Turn an app’s notifications on or off: Go to Settings > Notifications. Tap an item in the list, then
    turn notifications on or off for that item. Apps that have notifications turned off appear in the Not in Notification centre

  • I have the key for office home and business, can anyone advise how to use it to install office on mac

    I have the key for office home and business, can anyone advise how to use it to install office on mac

    Install the software. The first time you use it you will be prompted to enter your key.

  • Does anyone have a suggestion for an app for recording phone calls that is reliable and easy to use?

    does anyone have a suggestion for recording iphone4s calls that is reliable and easy to use

    There are no such apps that work. Doing so would require routing the call through a 3rd party service.

  • I have an iPod Nano 6th Generation for just over three months and the down volume button is sticking.  Does anyone have a recommendation for resolving?

    I have an iPod Nano 6th Generation for just over three months and the down volume button is sticking.  Does anyone have a recommendation for resolving?

    Dont buy this model again, this is the most common problem and i have gone through 4 of these 6th gen nanos all with the same problem.  You can find youtube videos that show you how to fix it yourself but you run the risk of breaking your ipod, also opening the ipod voids any warrently.

  • Does anyone know if I can transfer apps between my 2 apple ids? I have different ids for my iPhone and iPad?

    Does anyone know if I can transfer apps between my 2 apple ids? I have different ids for my iPhone and iPad?

    You can't, all content that you download from the store is tied to the account that downloaded it, you can't merge accounts nor transfer content between them.

  • HT1386 After updating my I phone 4s and I tunes, it downloaded my entire I tunes library to my I phone. I do not wannt all this music on my phone and have tried every thing to correct this with no results.Does anyone have a solution for this

    After updating the software on my I phone 4s it downloaded my entire i tune library to my phone. I have tried everything to correct this problem with no results. Does anyone have a fix for this. I do not want the entire lirary of music on my phone

    BINGO! Thanks very much. Now I have to figure out why my video capabilities have disappeared

  • How to use the same services-config for the local and remote servers.

    My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
    <?xml version="1.0" encoding="UTF-8"?>
    <services-config>
        <services>
            <service id="amfphp-flashremoting-service"
                class="flex.messaging.services.RemotingService"
                messageTypes="flex.messaging.messages.RemotingMessage">
                <destination id="amfphp">
                    <channels>
                        <channel ref="my-amfphp"/>
                    </channels>
                    <properties>
                        <source>*</source>
                    </properties>
                </destination>
            </service>
        </services>
        <channels>
        <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
        </channel-definition>
        </channels>
    </services-config>
    I think the problem  is the line
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    but I'm not sure how to use the same services-config for the local and remote servers.

    paul.williams wrote:
    You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
    The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
    Hi Paul,
    In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
    -services=path/to/services-config.xml
    IF
    services-config.xml
    have tokens in it and user have not specified additional
    -context-root
    and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
    Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
    for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
    -services=path/to/services-config.xml
    have been specified durring compilation.
    I dont know any better way to exmplain this, but in summary there is two places that you can tell swf  about service confogiration,
    1) pass -services=path/to/services-config.xml  parameter to compiler this way you tell swf file up front about all that good stuff,
    or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

Maybe you are looking for