Anyone have exp with 6 digit closed dial plan

Hi we are doing a CM deployment in North Asia that must be provisioned to at least eventialy include South East Asia, Australia and South Asia and possibly the rest of the planet. I have been trying to work this in to a 5 digit closed numbering plan and it is bloody difficult (they might have around 5000 staff in Asia Pacific by the end of 2008). The only solution I have come with is to go with a 6 digit number plan instead, though I am reluctant as 6 digits seems exsessive for an extn. Does anyone else have experience with 6 digits ? Is/was it a problem for users is it worth doing ?

One recommandation is to use site codes, and keep 4 digit within a site, and use for example 3 digit site codes or whatever makes sense based on number of sites. This week people won't get frustratd with dialing a lot of digits when calling someone within the same building.
Chris

Similar Messages

  • Does anyone have experience with having multiple editors work on the same project from different computers?

    Does anyone have experience with having multiple editors work on the same project from different computers?

    As much as I hate to admit it, YOU ARE RIGHT!
    I will tread lightly on this project.
    Thanks for the sanity check,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Photoshop cs6 won't allow me to highlight my existing text layers. Does anyone have experience with this problem?

    Photoshop cs6 won't allow me to highlight my existing text layers. I select the text tool and the text layer I want to edit, hover over text and each time I attempto to edit a new layer is created. Does anyone have experience with this problem?

    Be sure you go to Adobe's Web Site and make sure there are no Updates for CS6
    http://www.adobe.com
    Remember if you have trouble with a software issue it is the software and not caused by the Mac you are using
    Many users simply don't remember when you upgrade software you normally have to go to 3rd party web sites and update software as well.
    Cheers
    Don

  • Does anyone have experience with unzipping a password-encrypted ZipFile??

    Does anyone have experience with unzipping a password-encrypted ZipFile??
    My Zip Class works fine with every unencrypted file, but when I try to open an encrypted one, i get an error Message ("Encrypted ZIP entry not supported")
    Is ist impossible to unzip encrypted ZIPs???

    I've searched around a little bit and THIS IS THE SOLUTION!
    There is a (beta)version of winzip8 that uses a cli (command line interface)
    So, all you have to do is to implement a Runtime.getRuntime().exec(...) in your java program to call winzip8 and pass the zipfile path and the password.
    Here's the URL: http://www.winzip.com/wzcline.htm

  • Anyone have problems with apple ID's? I have the correct ID in my settings but when I try to update my apps my ID shows my first name and last name but not my ID? I'm not sure what else to do because I've made sure I have the correct ID in my settings!

    Anyone have problems with apple ID's? I have the correct ID in my settings but when I try to update my apps my ID shows my first name and last name but not my ID? I'm not sure what else to do because I've made sure I have the correct ID in my settings! Anyone else have this issue?

    I think its meant to show your name, not your ID.

  • Does anyone have experience with Virgin or Boost Mobile?

    I have been with verizon for a long time...I have 4 lines with this service. I have since bought several phones off of craigslist or ebay just so I wouldn't have to be subjected to the tier plan. We use so much data it's crazy. I want the new Samsung Galaxy S4 so bad!!! Grrr! I've even thought about switching to Virgin Mobile or Boost Mobile. We pay so much for our phones now and I know of one guy who has boost mobile and loves it. Does anyone have experience with these providers?

    BC's CRM is part of the package, Salesforce is of course more dedicated. That pretty much sum's up these sorts of use cases.

  • Does anyone have experience with using a Canon Vixia HF M52 Camcorder with Final Cut Express?

    I'm looking to purchase a new camcorder that is compatible with my Mac OS X (10.6.8) that will work well with Final Cut Express 4.0.1  I have downloaded the camcorder support info from Final Cut Express that list many capital camcorders.  I've used Sony tape based camcorders in the past.  I'm looking for High Definition.  I can stick with a tape based camcorder, but thought I would look at the Canon Vixia HF M52 as an alternative, which is listed as compatible.  I would like to download directly from the camera to FCE.  I film in the wilderness, like having an optical zoom of 20 or greater (yes, I use a small tripod). Does anyone have experience with the Canon Vixia?  And if not, but you really like another camcorder that you can recommend, what is it?

    The Vixia HF M52 is an AVCHD camcorder and should work perfectly fine with Final Cut Express 4 (4.0.1).
    The published "camcorder support list" has never been up to date and I would not take it to be a definitive list of compatible camcorders.
    One note, however, the Vixia HF M52 supports a number of different shooting modes.  I suggest sticking with the AVCHD 1920 x 1080i / 60 fps mode for use with FCE.   FCE does not support progressive modes except in 720p25/30 (which the M52 does not seem to shoot anyway); nor does FCE support any 24 fps modes.

  • Does anyone have problems with iTunes movie rentals freezing in the middle of the movie?

    Does anyone have problems with iTunes movie rentals freezing in the middle of the movie, requiring a force quit, which causes your rental to disappear? This has happened multiple times to me recently. Last time Apple didn't refund my money after reporting the problem. I have been using iTunes for many years but am about to give up.

    Correction: I was refunded for the previous movie freeze.

  • Does anyone have experience with migrating applications from iAS6.0 SP2 to SP3? Did it go smoothly or are there problems to be expected?

     

    Hi,
    I haven't. But, there are lots of changes from each service packs,
    henceforth you may have to stick to what the documentation says to avoid
    the errors that shoots up. Again, the errors depends upon how you have
    coded your application. Please let me know if you have encountered any
    errors and the messages for me to help you.
    Regards
    Raj
    Peter Clijsters wrote:
    Does anyone have experience with migrating applications from iAS6.0
    SP2 to SP3? Did it go smoothly or are there problems to be expected?
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

  • Does anyone have trouble with the iPad booting you off of the internet?  I will be in the middle of something (i.e. Facebook), and it boots me out and I have to sign in again.

    Does anyone have trouble with the iPad booting you off of the internet?  I will be in the middle of something (i.e. Facebook), and it boots me out and I have to sign in again.

    Jon....
    Don't confuse the threads here with 'typical' experience.  Most of the stuff here is from brand new users, and those that have problems, and considering the 30 million pads in use, represent a very small sliver.
    If you are having repeated crashes it is really pretty basic.  You either have a physical problem with your pad, or you are using too much memory.
    The iOS system is supposed to monitor memory, and shut down previously used apps automatically to free up memory for what you are doing now.  That part of ios is not perfect, and if an app introduces an unexpected memory load, sometimes it gets over whelmed.  
    This happens, more often than not, when using safari with multiple windows open on graphic intense sites.  It can also happen with a memory intensive game, and residual apps in the background.
    Double  tap the home key and take a peek at the recently used list, and shut them down completely, and often the problem goes away.
    If the problem persists, you may have a software issue, and a trip to the genius bar may be in order.

  • Anyone have issues with Sata 3 SSD in the 2011 Macbook Pro

    Hi Guys and Gals.
    Does anyone have issues with the Macbook Pro 2011 Model with a Sata3 Solid State Drive ?
    I have issues and have a Vertex3 made by OCZ. I am in active discussions with OCZ to find a resolution on their end. I have also contacted Apple Care and Intel and have run into dead ends.
    However I am bringing my MBP for a repair, logic board replacement and will post the results after they change the logic board for me.
    Check my thread on OCZ: http://www.ocztechnologyforum.com/forum/showthread.php?89970-A-call-to-all-Macbo ok-Pro-2011-Users-with-SATA3-Issues
    Regards,
    Jase

    Well, my My Genius appointment went very much as anticipated - it might well be a SATA III connection but Apple they do not support SATA III drives - least of all other people's.
    Furthermore, they do not actually support anything other than the original configuration as sold - so given that I bought a 750 GB HD version, that is what I am stuck with - I asked Apple (London Regent St) if they could upgrade it to one of their own SSDs if I paid for it - they could not.  They can only repair the machine to its original condition. They could not even advise me as to what Apple co-branded SSD I should look for to be compatible with this model - 512 Gb drives do come up on Ebay - Apple / Toshiba seems to be the normal one - but they couldn't advise if that would work or not. So it could be good money after bad.
    Anyhow, they finally agreed to swap the cable, for a charge, so that will take two or thee days, plus the 5mins to do the job.  I will post the results of the cable swap when I have it. They could not tell me whether it would be a different version of the SATA cable to the one already in the machine - but I asked to keep the old one so I can see if there is any visible difference.
    It does seem strange that Apple support thunderbolt drives - which you can't even buy yet, but don't support SATA III in either Mac Pro or MAcBook Pro given that the full 3.0 standard was released on May 27, 2009.
    Two and a bit years is a long time in tech terms.
    Stephen
    eni wrote:
    I, as so many others, are also facing issues with my SATA 3 SSD. I've been reading about people having issues on OCZ's forum, on Intel's forum and all over the web. I have a MBP 2011 13" bought last month with the 6/6 setup.
    Hotjase, have you come to understand that the issue lies with the logic board? One would hope that Apple would owe up and come forward if there are in fact faulty logic borards. I have read that Apple have gone from 6/3 to 6/6 and then back to 6/3, though I do not know if this is applicable to all MBP models, or just some. As I sayed, I have the 13" model.
    SdeS, what was the result of your talk with the Genius? Did you receive a new cable? If so what result?

  • Does anyone have experience with error 504 when trying to download a podcast?

    Does anyone have experience with error 504 when trying to download a podcast?  I've been a subscriber for two years without issue and in the last two days can't download this particular podcast (everything else is working fine - music, other podcasts, etc)

    The album was released on the 27th March this year, so the error occurred almost immediately after it was supposedly available.
    In the manage pre-orders section of my account, it says AVAILABLE but does not give me any choice over whether to download it, just to cancel it. Is this normal?
    iTunes customer services reset my password and tried to download the album themselves, but they also got the 5002 error, so it's been passed off to the engineers. How long does that usually take?
    If anyone has any other suggestions, it would be greatly appreciated.

  • Does anyone have experience with Iogear GBU 421? My MacPro has no in-built Bluetooth.

    Does anyone have experience with Iogear GBU 421? My MacPro has no in-built Bluetooth.

    My 2010 Mac Pro does have built in bluetooth but I use the IOGear GBU421 instead.  That's because the built in bluetooth on the mac pro suck$ if you are more than about 3 feet from the machine.
    See the descussion: Poor Bluetooth reception and jerky mouse
    It works but you need to get used to its "quirks".  If you sleep your machine like I do the dongle is off because there is no USB power when sleeping for the dongle.  So you need some wired USB device to wake the machine.  In my case I use my wired keyboard.
    When waking up it doesn't always become paired immediately (maybe 30% of the time).  Then you need to flip the mouse switch to get it active.  Interesting enough I don't have that problem with the trackpad.
    Most of the time, in the rear occasions I reboot my machine, the mouse is ready to go.
    Once you get used to the "quirks" it's no big deal.  Hey, for about $9 what do you want?
    By the way I also always keep a wired mouse attached as a backup.

  • I have an iphone 4. Recently I have issues with certain apps closing immediately once they are open. ie Email. Tried re-booting entire thing and still having issues. Any one else having this issue or a fix for it?

    I have an iphone 4. Recently I have issues with certain apps closing immediately once they are opened.(ie Email). Tried re-booting entire phone and still having issues. Any one else having this issue or know a fix for it?

    Delete background Apps from memory and then Reset.
    To Delete background Apps, double click Home button, in the bar at bottom, hold down on an App Icon until the minus sign appears, tap all the minus signs, until all background Apps are cleared from memory. Then Reset, hold both Home and Power buttons until the iPhone begins to restart itself, ignor the 'slide to power off' let the iPhone restart itself. Usually takes about 10 seconds of holding both buttons.

  • TS3276 Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

    Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

    Not sure if this is a fix, but I tried sending myself a test email from only  the Bcc field, and lo and behold it now shows the Bcc field in all sent item previews;
    ...maybe leaving the 'To' field blank on purpose forced Mail to show it.
    Rebooted the Mail program, still there - rebooted the machine, still there. Hope this is still relevant and it works for you too - J.

Maybe you are looking for