Anyone have experience installing and running the Condor Engineer QPC-1553 PXI board
Do anyone know how to installing and running the Condor Engineer QPC-1553 PXI board using their LabVIEW drivers?
Hi CEY,
as far as i know there are many documents with it. Install it like every other hardware. To test it there is a program from Condor Engineer. To build your application, there are good example for BC, BM and RT.
Mike
Message Edited by MikeS81 on 02-19-2008 09:27 AM
Similar Messages
-
after downloading new version of Firefox 4 I am unable to use touch pad for scrolling. I have tried installing and uninstalling the new version but this problem has always been occuring. I do not know how to fix this problem so I always return to the old version.
If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox -
What privileges user should have to install and run weblogic on linux box
What privileges user should have to install and run weblogic on linux box ?
Hello.
Normal user if you don't want to listen to ip port < 1024 or write in protected directories (like /var).
Regards. -
I am unable to install and run the latest version ot iTunes. Getting "Runtime error - R6034. An application has made an attempt to load the C runtime library incorrectly"
Error 7(Windows error 1114)Try and not duplicate these issues and do a search next time.
Now load https://discussions.apple.com/thread/5826672?start=0&tstart=0
and that Topic has the correct information to fix this problem.
Regards
pcbugfixer -
Any known risks installing and running the "feed the beast" minecraft mod?
I know this isn't a Minecraft forum - I plan to check those too - but I wanted to solicit the opinions of some Apple/OS experts too.
My son has been hounding me to download and install the "Feed the Beast" mod for Minecraft. I have been putting it off since I haven't been sure if running these pose any risk to my computer.
So that is my question - what should I be aware of before installing and running this mod? Anything? Or is it relatively harmless/risk-free?
2010 iMac
OS X Mt. Lion 10.8.2
3.06 GHz Intel Core 2 Duo
8 GB 1067 MHz DDR3
NVIDIA GeForce 9400 256 MB
Thanks in advance!
-CWThank you for your response. I've had the Facebook app for quite some time and just started having problems.whenever there's a new update I always update right away. Wasn't sure of it would be a FB or iPhone problem. But you're right, haven't had any problems with any other apps. Thanks so much!
-
Anyone Have Experience Installing PHPMyAdmin?
Hi,
I'm following along with this tutorial for installing PHPMyAdmin:
http://www.adobe.com/devnet/dreamweaver/articles/settingup_php04.html
Per Step 8, when I go to
http://localhost/phpmyadmin/setup/index.php
I get this:
Bzip2
Bzip2 compression and decompression requires functions (bzopen, bzcompress) which are unavailable on this system.
ZIP
Zip decompression requires functions (zip_open) which are unavailable on this system.
Insecure connection
Force SSL connection
This option should be enabled if your web server supports it
Servers
There are no configured servers
Anyone have any idea what the heck I'm doing wrong?
Thank you.Try the PHPMyAdmin forums or the documentation on the PHPMyAdmin Docs page here
-
I have downloaded itunes 11.1.4 on my windows vista pc and i get a nicrosoft visual c++ runtime error message 6034 and can't get any further. Does anybody know how to fix this?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99322) -
artwork
Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Is there a special way to install this add in?
I downloaded it from the adobe.com website- under Resources- dowloads and updates- additional downloads-I then clicked on the Microsft Outlook [32 bit Windows] www.adobe.com/support/connect/downloads-updates.html#additional-downloads
I did have another add-in that had downloaded about a week prior to this one which did the same thing this one was doing except for the first one didn't make my whole desktop freeze up I would just get constant notificatioin boxes popping up telling me there was some error with adobe meeting of some sort. I just want to be able to schedule an adobe connect meeting via outlook instead of having it sent to me first and then having to turn around and have to download it to any other sites that may be having the same issues.I wish I would have taken pics of the error boxes but unfortuanly I didn't. I did exactly what the guide said to do for installation- -
Any help with this would be appreciated
Simply trash everything. You screwed yourself and made a mess, anyway. You need to install the program properly from scratch.
Download CS3 products
Mylenium -
How can I install and run the Java Telephony API
Hello!
I have downloaded the Java Telephony API but I couldn't find the installation notes for installing it on my PC (Win2000).
Can anyone help me?Since the package is downloaded as just .class files just set your classpath like you normally would if you were creating your own package...I personally would install the class file version...run a sample program and see if this works...
-
see question
Hi mgolfhack,
You may see that message below the Google search box on www.google.com/firefox which is the old Firefox default home page. That page is no longer being maintained by Google.
You should try changing your home page to:
about:home
If you don't know how to change the home page, you should take a look at the Knowledge Base article [[How to set the home page]].
Hopefully this helps -
Installing and running Arch linux on the new MacBook 2015
So Apple has just started taking orders for the new 2015 MacBook. You know --
the thinnest and lightest MacBook to date (even thinner than the MacBook Air),
with a 12 inch retina display, the Intel Core M processor, a single USB-C port,
and the new force touch trackpad.
I'm pretty sure there are a few people like me who'd like to buy this new
MacBook and then install and run Arch (or some other flavor of linux) on it.
But of course, this MacBook is in many ways very dissimilar to previous MacBook
Pros and MacBook Airs. So this thread is a shout out to likeminded individuals
who are willing to brave the odds and install Linux on this new machine, so we
can help each other figure out (and hopefully fix) the inevitable issues that
will arise when we venture into this uncharted territory!
I have a little bit of experience installing and running Arch on MacBook Pros
and other Apple computers, but I'm (very) far from being an expert. But based
on my limited experience, I think the following areas will pose the biggest
challenges to getting Linux properly up and running on the new MacBook:
1. Installation: it's possible that booting a live USB will fail. So we might
have to use a CD. Indeed, perhaps we may even have to build a special ISO
image for this laptop. And once the install is complete, EFI/EFISTUB booting
with/without refit/refind may or may not work. Also, installing a bootloader
(grub, gummiboot, etc.) for dual booting Mac OS X and Linux may be a
challenge. We might have to endure kernel panics and deal with cryptic error
messages while booting.
2. Wifi may or may not work reliably. We might have to do some tinkering with
different drivers, etc.
3. Battery life may not be very good. We might have to fix a few things here.
4. The HiDPI retina display may or may not work properly with specific window
managers/desktop environments. Fonts/icons might be too tiny, may not scale,
etc.
5. The new Force touch trackpad may not work out of the box. In fact, I'm
fairly sure the regular xf86-input-synaptics package won't play nice with
this trackpad. There may not be support for features like the trackpad's
haptic feedback, multi-finger gestures, pressure sensitivity, etc. Indeed,
this might actually take a while to get properly working under Linux.
6. I don't know if the new USB-C port will work out of the box. It may not
play nice with USB flash drives and other peripherals and there may be
issues with ehci/uhci/whatever.
I tried Googling around trying to learn as much as I could about the issues
above, but since the laptop is going on sale only today and most users are
probably not interested in running Linux on it, I came up quite empty. I think
many others on this forum might also have faced the same issue.
So here's an open invitation. Let's share our experiences trying to get linux
working on this laptop. If you buy this laptop and try to install Arch on
it, please let us know how it went! Even if some things work out of the box, it
might be useful for others to know, so please share.
And of course, if you have more information/gotchas: for example, if you
encountered and managed to fix one or more of the issues above, or you
encountered a problem that's not on the list above, or even if you tried
something and it didn't work out as expected, please post below. I'm sure this
will be a very big help to others trying to solve similar issues on the same
hardware. Thanks!It would probably be beneficial to post the output of lsusb -vvvv and dmesg.
FS1RTG77 wrote:
2. Broadcom BCM4360 AirPort Extreme, not supported.
5. The new Force touch trackpad and keyboard, both SPI bus devices, do not work.
On 2, it may just be a case of needing firmware, my laptop has a BCM43602 card, and the firmware required has only just been added to the linux-firmware package. Prior to that I had to install it manually.
On 5, I'm wondering if you identified them as SPI devices by looking in OS X, I ask because my laptop categorises my keyboard and trackpad in the same way. But they are actually still both connected to the USB bus, and presumably using SPI as an interconnect between the keyboard/trackpad and the microcontroller that tie them together. -
Can I install and run the Beta version [...safely ] alongside my existing, working, FF3.6?
If so, how?
FireFox is my main browser appliaction on a Windows XP machine and I will need it working...If you want to test the beta, probably the easiest method is to install the portable test version on your hard drive. For details see method A as shown by the-edmeister here - http://forums.mozillazine.org/viewtopic.php?f=23&t=1062975
The portable test version is currently set to Firefox 4 beta 7. -
Open and run the VI using FP.Open from another VI
I would like to have LabVIEW open and run the VI when I open the second VI (number 2) from VI (number 1). I set the appropriate Execution options in File»VI Properties
to make both VI run when opened but it works only for the first vi and
when I open 2.vi from another 1.vi the second vi will open but not
run.Would u plz let me know how can I make the second vi run when I open it using FP.Open.
Attachments:
111112w.jpg 33 KBThere are several ways to start VI 2.
- use a invoke node of VI 2 which says : "run when opened"
- edit the VI properties of VI2 en set "run when opened" to TRUE
See attachment
Kind regards,
- Bjorn -
Have fun using LabVIEW... and if you like my answer, please pay me back in Kudo's
LabVIEW 5.1 - LabVIEW 2012
Attachments:
RunWhenOpened.PNG 33 KB
Maybe you are looking for
-
Report generation toolkit how to access "title text" 1.1.3
Hi at all, in LabView 8.5.1 with Report Generation Toolkit 1.1.2 I used the "Generate Report Get Modified Data.vi" and "Generate Report Set Modified Data.vi" to modify the Report Title Text. In the Version 1.1.3 of the toolkit I found no method to a
-
Hey, I need some help fast please. I recently booted up my gaming rig after swapping out a 7970 graphics card and upon system boot up, as the windows 7 logo appeared the system crashes and a BSOD appears for a split millisecond and I'm asked to start
-
How can I use USB camera with NI cRIO 9022, please see my strange problem.
Hi, I would like to use a USB camera with NI cRIO 9022. I used the same USB camera with NI USB 6216 DAQ device and developed a VI(within a PROJECT and outside it). So, It is working fine with NI USB 6216 device when I use the Vision Assistant
-
Output the same size as the cropped video - to Quicktime
I have cropoped and resized my video and want to export it to quicktime the same as the cropped size. I have tried to follow the instructions at this link, using the Crop button. I followed the instructions: "To crop the image interactively, drag th
-
iPhoto on my iMac keeps crashing. On 2 occasions its also deleted several events. When reopening, the event boxes & dates are there but have no pics. Can anyone help with stopping the crashes please? Also are the pics still accessible or do I have to