Anyone have issues with data synchronization filter functions failing?

We are on 11.1.1.3 and are observing filter failure when moving data from planning to HFM using data sychronization. The query is pulling more records than desired and erroring on the load to HFM on members that only exist in planning. In other cases, the quiery is pulling in upper level dim members.
We have multiple dimensions where we are using level0(base) filter function to define the set of members. In one dimension, the filter error crosses to include leaf members outside of the set. On another dim, the filter error includes upper level members. The coincidence is that failures are occuring on dim where planing has more nodes than HFM.
One on dimension, the error that pulled upper level members went away when I specified all leaf members using the EQUAL on the filter.
Is this a known bug?
Thanks

Since Straight Talk customer service was no help at all by telling me to call apple instead of trying to help me, this is what I did to fix the issue! I am not saying it will work for you but it worked for me so what do you have to lose! First of all, I have a At&t iphone!
The first thing I did was remove the Straight Talk APN Profile that was installed or remove any one there! Because of what I read in the Straight Talk website which was:::
For iPhone customers who activated using anAT&T compatible SIM card, there is NO need to program APN settings as this will be done automatically.
Ok, here is what I did after that: First I removed the SIM card from the phone, then I rebooted the phone, then I reset network settings, then put the SIM card back in and BAM, I had 3G once again!
Please keep in mind I am no expert, It was just by chance that this worked for me! And all of this with no APN Profile what so ever! Good Luck,,,,Dano

Similar Messages

  • Anyone have issues with Sata 3 SSD in the 2011 Macbook Pro

    Hi Guys and Gals.
    Does anyone have issues with the Macbook Pro 2011 Model with a Sata3 Solid State Drive ?
    I have issues and have a Vertex3 made by OCZ. I am in active discussions with OCZ to find a resolution on their end. I have also contacted Apple Care and Intel and have run into dead ends.
    However I am bringing my MBP for a repair, logic board replacement and will post the results after they change the logic board for me.
    Check my thread on OCZ: http://www.ocztechnologyforum.com/forum/showthread.php?89970-A-call-to-all-Macbo ok-Pro-2011-Users-with-SATA3-Issues
    Regards,
    Jase

    Well, my My Genius appointment went very much as anticipated - it might well be a SATA III connection but Apple they do not support SATA III drives - least of all other people's.
    Furthermore, they do not actually support anything other than the original configuration as sold - so given that I bought a 750 GB HD version, that is what I am stuck with - I asked Apple (London Regent St) if they could upgrade it to one of their own SSDs if I paid for it - they could not.  They can only repair the machine to its original condition. They could not even advise me as to what Apple co-branded SSD I should look for to be compatible with this model - 512 Gb drives do come up on Ebay - Apple / Toshiba seems to be the normal one - but they couldn't advise if that would work or not. So it could be good money after bad.
    Anyhow, they finally agreed to swap the cable, for a charge, so that will take two or thee days, plus the 5mins to do the job.  I will post the results of the cable swap when I have it. They could not tell me whether it would be a different version of the SATA cable to the one already in the machine - but I asked to keep the old one so I can see if there is any visible difference.
    It does seem strange that Apple support thunderbolt drives - which you can't even buy yet, but don't support SATA III in either Mac Pro or MAcBook Pro given that the full 3.0 standard was released on May 27, 2009.
    Two and a bit years is a long time in tech terms.
    Stephen
    eni wrote:
    I, as so many others, are also facing issues with my SATA 3 SSD. I've been reading about people having issues on OCZ's forum, on Intel's forum and all over the web. I have a MBP 2011 13" bought last month with the 6/6 setup.
    Hotjase, have you come to understand that the issue lies with the logic board? One would hope that Apple would owe up and come forward if there are in fact faulty logic borards. I have read that Apple have gone from 6/3 to 6/6 and then back to 6/3, though I do not know if this is applicable to all MBP models, or just some. As I sayed, I have the 13" model.
    SdeS, what was the result of your talk with the Genius? Did you receive a new cable? If so what result?

  • Does anyone have issues with start up time

    does anyone have issues with start up time

    Have you tried a reset?
    Press & hold both Home & Power until you see the Apple logo.
    If that doesn't fix it, restore it as new and see if that fixes it.

  • Does anyone have issues with your battery in the iPhone 5 having to be recharged 2 to. 3 times daily?

    Does anyone have issues with your battery in the iPhone 5 having to be recharged 2 to. 3 times daily?

    Only concrete way is to use it less sorry see here every method possible has been tried
    https://discussions.apple.com/thread/4329696?start=2970&tstart=0

  • Does anyone have problems with data usage with att and Iphone5?

    Hello, Does anyone have problems with data usage or non usage I should say with Iphone 5 and AT&T?

    After 4+ months of dealing with this data usage and battery drain problem that included 3 data captures of my wife's iMac, the trigger for us regarding the problems syncing with iCloud, and 5 hours of logs off my iPhone 6 to be analyzed by Apple engineers that included times my wife's computer was both on and off to demonstrate the difference in data usage and battery drain under those conditions, I can say with very reasonable certainty that the iOS 8.3 and corresponding Mac OS 10.10.3 update has solved the problem. 
    We have now been running for about 2 weeks and data usage with the iCloud Servers attempting to sync has dropped from a rate of 31 GBs to under 15 MBs per month.  Yes, you read it right.  We were burning 2000 times as much data doing absolutely nothing important on both of our phones, a 5s and a 6.  Just imagine what that does to battery life!  The 5s would last about 5 hours and the 6 was dead in less than 14.
    The distasteful aspect of this process was how the engineers were quietly fixing the problem at the same time sending messages to my contact person within Apple that were dismissive in nature in the face of indisputable unreasonable results. I must say, this experience with the multiple times the engineers' responses were inappropriate put a little tarnish on the old Apple shine of the ‘It just works’ mantra. This was my first experience in 34 years that caused me to stop recommending Apple products without reservations and with a disclaimer.
    Since the update solved the problem, then I can only conclude that there was a logic bug regarding the reaction within the process to the incoming data that was corrected.  There was noting short of logging out of iCloud that circumvented the problem for us, Gator5000e and probably many others noted on other threads.  I am not trying to imply that this is the cause of everyones battery use problem, but it is reasonable that it was a cause for many.

  • Anyone have issues with "touch screen" not responding?

    Does anyone find that the touch screen doesn't respond? I have huge issues with this style.
    Touching and swiping on a screen that is 1.5 inches isn't fun. I need shade to read the screen (bad for snow), I need to go thru so much just to get to a song, a podcast, whatever that was playing before I HAD to turn off nana. I need to turn off nano each time.
    1. Turn on by holding button like forever.
    2. swipe, swipe, swipe, swipe to get to songs or podcast. Select, select, touch selcet, not selecting, touch, touch touch.
    3. Select 'songs; selevet something else to get to a screen that says shuffle.
    4. Select, select, touch, touch, use index finger, thumb, touch, breath on finger, touch again.
    5. After one song plays after selecting "shuffle", it repeats, repeats,
    6. Take ipod out of pocket, stand in shade, hit the snooze whatever button, to activate screen, Is screen activitated? yes? But it blinked off to quick to make selectioon of touch proof screen.
    7. Walk inside to touch screen, to see screen. Hit button, wait for long time for this to start again (much like laptop starting).
    8. Swipe to get to menu with songs, swipe, swipe, swipe swipe.
    9. Select music: albums, artist songs. By selecting I mean touch touch touch, touch, use thumb, touch. for each selection
    10. Are you sure this is an Apple product?
    Can I return this POS and wait for someone to go back to what worked best??

    Oh, and yes I have restored to factory settings. Then resynch.
    I have done the soft reset or whatever it's called on this one.
    It is updated.

  • Does anyone have issues with the instrument library?

    I've installed iLife 08 and then added all the jam packs. Now when I open GB the default track is an accordion (not a piano) and when adding loops to the timeline they take on a different instrument sound (e.g. drum loop sounds like raindrops, etc.)
    I've searched high and low for similar problems and have found nothing that resembles this, I've cleared my preferences and repaired permissions and still nothing helps, I've contemplated reinstalling but I have no guarentee that that will help and I'm reluctant to invent the 3 hours it will take to do all that if it is all for nothing...
    Bottom line is...is this really an issue with the instrument library and is there any way for me to fix this without reinstalling?

    Just loaded the 6.0.2 update a few days ago.  I was hoping it would fix the dropping of wifi where the 4g and 3g always kept.  I have restored the router and I have even switched towers through AT&T's help, but to no avail.  I still am dropped and sometimes it spins and spins looking to connect and then says, Cannot connect at this time. Sometimes it connects, and when the phone goes to sleep, it disconnects and then it is heck connecting again.   I am very upset for I do not have unlimited data and my data has soared over 270 mg which I usually always kept way below 200 as  being in my home most of the time.  I am planning to take into AT& T store for a new one, just not happy with the wifi situation.  It is sad that this cannot be fixed with an update.  I saw earlier that some Iphone 5 made in China were the cuprits, and maybe I got one of those.  I hope At&T and Apple are reading these dialogs.  Please let me know if fixes are on the way!

  • Hi, does anyone have issues with the Camera app uploading photos to the photo album? This happens after I downloaded iOS8.1.2

    I have just updated my iPhone iOS to 8.1.2. Since then, the camera is not able to upload photos to the album immediately and some are even lost. Does anyone have the same issue or know how to fix this?

    I found it much easier to have my apps on the last page and let the pre-loaded apps stay where they are on the first couple of pages.  While I'd prefer to have my apps first, at least they are all together.  I found it far too much work to try to move them around another way, plus it shifts some things around in a way that I did not intend.
    BTW, I definitely prefer the Fascinate's arrangement of the icons over the Droid X2, which is always in alphabetical order in a vertical non-stop continuum.

  • Anyone having issues with data when using iphone 4 on straight talk?

    ok. so i have a straight talk micro sim card purchased for installing in an iphone 4. i have found ways to get the data and mms to work perfectly using a method i found on sinfuliphone.com without jailbreaking. its been working great for last couple months. now my data is not working at all but i can still do mms msgs. was wondering if anyone else had this issue and any suggestions.

    Since Straight Talk customer service was no help at all by telling me to call apple instead of trying to help me, this is what I did to fix the issue! I am not saying it will work for you but it worked for me so what do you have to lose! First of all, I have a At&t iphone!
    The first thing I did was remove the Straight Talk APN Profile that was installed or remove any one there! Because of what I read in the Straight Talk website which was:::
    For iPhone customers who activated using anAT&T compatible SIM card, there is NO need to program APN settings as this will be done automatically.
    Ok, here is what I did after that: First I removed the SIM card from the phone, then I rebooted the phone, then I reset network settings, then put the SIM card back in and BAM, I had 3G once again!
    Please keep in mind I am no expert, It was just by chance that this worked for me! And all of this with no APN Profile what so ever! Good Luck,,,,Dano

  • Does anyone have issues with Windows 7 and Acrobat 8 Pro

    I am using Windows 7 and Acrobat 8 Professional. I have 3 installs that work great but 1 that keeps getting a flashing box the size of a popup and then the entire machine freezes up and requires a reboot to work at all. The flashing box is so fast, I cannot read and data on it and as no other programs or software will function at the crash, I am not sure how to troubleshoot. I did a repair, no help. I uninstalled and reinstalled but again, no help......Any tips would be appreciated... Thanks all,

    You should be able to move the problem plugin from the plugin folder of Acrobat to a temporary folder and see how it runs. You also did not indicate if it was a 64 bit version of Win7. If the latter, be sure to update Acrobat (should do that anyway). Several folks have been successful with Win7 X32, but I am not sure about X64. Often the updates will fix most of the problems and are even recommended in XP.

  • Did anyone have issues with losing their ringtones when updating itunes?

    I lost all my ringtones when I updated my itunes. which is not good because i cant redownload them. Anyone know what happened tried to restore old backup and they didn't restore that way either.

    Hi WolfStorm102,
    Welcome to the Apple Support Communities!
    I understand that your ringtones are missing after you performed an update to iTunes. You are correct that ringtones cannot be re-downloaded from the purchased section of the iTunes Store. In this situation, you may need to either use the report a problem link with your purchases or contact iTunes Store support. You can use the following article as a reference.
    Download past purchases
    http://support.apple.com/kb/ht2519
    Get help
    You may find the answer to your question below:
    If your download was interrupted, learn how to resume the download.
    See what to do if you have trouble using an app.
    Make sure your computer is authorized using the Apple ID that you used for the original purchase.
    Make sure your iPhone, iPad, iPod touch, Apple TV, Mac, or PC is associated with your Apple ID.
    Make sure you’re in a country where iTunes in the Cloud is available.
    If you’re having trouble downloading an item, make sure you can download the item again from iTunes in the Cloud. You may want to sync the content to another device instead.
    If you can't find the item that you purchased in the iTunes Store, report a problem with the item. You can report a problem with a purchase made within the last 90 days.
    If you have a problem with an older purchase, contact iTunes Store support.
    The last two bullet points would apply to your situation with the ringtones.
    I hope this helps,   
    -Joe

  • Anyone have trouble with having a non functioning keyboard pop up that is the reverse of the functional keyboard?

    I have an ipad5 with the latest OS and have been having an irratating problem from day 1.  What happens is for no reason a reverse image (black) of the normally white keyboard will appear and will not go away unless I hit one of the keys on my bluetooth keyboard.  It is wierd the way it randomly pops up.  Sometimes I will go several days without seeing it and then all of a sudden it will keep popping up.  Between yesterday and today it has popped up at least 15 times.  I have been to the Apple Store but none of the techs have seen this nor know what the fix is.  Can anyone help give a little insight into what is causing this and how to prevent it.  Thanks

    Never had an answer to this - just stopped using the Airport on the iMac. For now, I'll mark this as answered.

  • Has anyone encountered issues with Data Execution Protection (DEP) when using windows with Muse?

    A week without my Muse. Please HELP. I am trying to be Patient.
    Each time I try to open my muse it is freezing and shutting down right away. I open the file and it just freezes.  I get a window that pops up explaining DEP (I have tried to shut it off and it doesn't work). Has anyone else ever had this happen? I really want to get my Muse working again, its going on a week without. I have windows Vista, 32 bit. Since I did the recent updates its not working anymore. Can I roll back to an older version? Thank you.

    So I found a fix to this myself. I found that others were having the same issue in Photoshop CS6 too. What I did was go to open the app, right click on the app icon, go to properties>compatibility>click the box for Compatibility Mode that says "Run this program in compatibility mode for:: select your operating system (Mine was windows xp sp2). I also selected "Run as Administrator". So far it is working, I am upset that this was such a simple go around and I have been without my muse for over a month now.

  • Anyone have issues with their power button on the 928?

    I've had my 928 replaced once already and now the power button has decided it only wants to work occasionally. I love the phone especially the camera and sound and video quality of the recordings it makes. I have developer preview on it so I have the 8.1 update so no gripes there... Also VZW reps since it's still under warranty (I have total equipment coverage as well) can I have it replaced? It has a small scuff on the bottom of the back side and when I say small I mean small enough I could remove it with a polishing wheel on a dremel and make that dissappear completely.... I can't afford to send it off or anything so a replacement mailed to me and sending this one in (again) is my only option as I use it for business.

        Hello d4a1985,
    I'd love to help you figure this out! Normal wear and tear does not void the warranty, but damage such as a crack or a break would. Since we are unable to see the device, if you are unsure, we suggest bringing it in to the Verizon store for an evaluation.
    Thanks,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • TS1424 Anyone have problems with iTune purchases and functions when overseas?

    I am in Israel, been here for three weeks and had no problems with apps updates, purchases,etc.
    suddenly it says that I cannot coplete transactions because PayPal is declining payments.
    However a quick check with PayPal shows that my account is in order and it should NOT be a problem.
    There is a suggestion that being in another country is related to the problem.
    Is this Possible ?

    I have this exact problem.  Also affects any app that is using map services (like foursquare).  I've had Apple replace the phone (didn't help), had Verizon replace the SIM card (didn't help), and so I am still trying to solve this while Apple and Verizon point at each other and say that the other one is the problem.
    Sorry no solution, but I hope one pops up here on this thread!

Maybe you are looking for

  • I can't sync my purchases to any device

    We recently had to purchase a new pc, so I was having trouble finding my itunes purchases.  I found them, got them back onto my itunes library, but now it won't let me synch it to my devices (ipod & iphone).  When I see "synch to devices" it is the c

  • How to ceate RefPlant:consumption data use BAPI_MATERIAL_SAVEDATA?

    Hi all. I need create material master data like via MM01. I call BAPI: BAPI_MATERIAL_SAVEDATA to create data. I could NOT found the relevant fields in parameters list for 'RefPlant:consumption'(Reference plant for consumption) in Forecasting View. Is

  • How to create 3 Classes from one

    Hello, I have one Databeseconnection class. But I would like creating 3 classes so that I have one connection class, one insert class and one select class. How Can I do It? Could you help me, please? package Test; import java.util.*; import java.sql.

  • 10.4.11 server problems

    Hi Gurus, We have multiple OSX 10.4 servers, and having a problem with one. Sharing was setup through " Workgroup Manager " " Sharing " This has been flawless ( Years )up till 2 days ago. The share still exists, BUT, the drive which contains the shar

  • CLAF_CLASSIFICATION_OF_OBJECTS - Language dependance

    Hi All, when i am trying to get characterisitc values through CLAF_CLASSIFICATION_OF_OBJECTS, i can find the values in t_objectdata. but for one of my characteristic t_objectdata - ausp1 is displaying as the text 'YES'. i am passing this text to my f