Anyone have issues with their power button on the 928?

I've had my 928 replaced once already and now the power button has decided it only wants to work occasionally. I love the phone especially the camera and sound and video quality of the recordings it makes. I have developer preview on it so I have the 8.1 update so no gripes there... Also VZW reps since it's still under warranty (I have total equipment coverage as well) can I have it replaced? It has a small scuff on the bottom of the back side and when I say small I mean small enough I could remove it with a polishing wheel on a dremel and make that dissappear completely.... I can't afford to send it off or anything so a replacement mailed to me and sending this one in (again) is my only option as I use it for business.

Hello d4a1985,
I'd love to help you figure this out! Normal wear and tear does not void the warranty, but damage such as a crack or a break would. Since we are unable to see the device, if you are unsure, we suggest bringing it in to the Verizon store for an evaluation.
Thanks,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Anyone have issues with Sata 3 SSD in the 2011 Macbook Pro

Hi Guys and Gals.
Does anyone have issues with the Macbook Pro 2011 Model with a Sata3 Solid State Drive ?
I have issues and have a Vertex3 made by OCZ. I am in active discussions with OCZ to find a resolution on their end. I have also contacted Apple Care and Intel and have run into dead ends.
However I am bringing my MBP for a repair, logic board replacement and will post the results after they change the logic board for me.
Check my thread on OCZ: http://www.ocztechnologyforum.com/forum/showthread.php?89970-A-call-to-all-Macbo ok-Pro-2011-Users-with-SATA3-Issues
Regards,
Jase

Well, my My Genius appointment went very much as anticipated - it might well be a SATA III connection but Apple they do not support SATA III drives - least of all other people's.
Furthermore, they do not actually support anything other than the original configuration as sold - so given that I bought a 750 GB HD version, that is what I am stuck with - I asked Apple (London Regent St) if they could upgrade it to one of their own SSDs if I paid for it - they could not. They can only repair the machine to its original condition. They could not even advise me as to what Apple co-branded SSD I should look for to be compatible with this model - 512 Gb drives do come up on Ebay - Apple / Toshiba seems to be the normal one - but they couldn't advise if that would work or not. So it could be good money after bad.
Anyhow, they finally agreed to swap the cable, for a charge, so that will take two or thee days, plus the 5mins to do the job. I will post the results of the cable swap when I have it. They could not tell me whether it would be a different version of the SATA cable to the one already in the machine - but I asked to keep the old one so I can see if there is any visible difference.
It does seem strange that Apple support thunderbolt drives - which you can't even buy yet, but don't support SATA III in either Mac Pro or MAcBook Pro given that the full 3.0 standard was released on May 27, 2009.
Two and a bit years is a long time in tech terms.
Stephen
eni wrote:
I, as so many others, are also facing issues with my SATA 3 SSD. I've been reading about people having issues on OCZ's forum, on Intel's forum and all over the web. I have a MBP 2011 13" bought last month with the 6/6 setup.
Hotjase, have you come to understand that the issue lies with the logic board? One would hope that Apple would owe up and come forward if there are in fact faulty logic borards. I have read that Apple have gone from 6/3 to 6/6 and then back to 6/3, though I do not know if this is applicable to all MBP models, or just some. As I sayed, I have the 13" model.
SdeS, what was the result of your talk with the Genius? Did you receive a new cable? If so what result?

Anyone have trouble with their power cord?

My power cord won't charge my computer because the cord has started to come out of the little magnetic brick. anyone else have this problem? and does any one know if this is covered under applecare?

it should be.. its part o the computer so id think it should be..

Anyone have issues with their ipad staying connected to the Internet using an arris-5e12 router? I seem to be getting kicked off the Internet frequently

Anyone having trouble staying connected to the Internet using an Arris 5e12 router.?

Are you in an area where it doesn't pick much wifi signal up. If yes try to move your device nearer to the wifi connection box

Does anyone have problems with their Safari ever since the latest OS X update?

I've noticed ever since i have updated to the OS X, i have internet problems. It lags, won't load the same page twice i have to shut down Safari & reopen.
Does anyone else have this problem?

http://www.machangout.com/faq
Here is a recent thread where Glims was the problem:
My Safari crashes as soon as I open it...??

Has anybody else been having issues with their home button after using assistive touch for a little while?

Me and my brother have been messing with Assistive Touch on and off since iOS 5 canme out. We been noticing that when we actually move to use the home button, sometimes it doesnt respond. Though I'm all for thinking my home button my be on the fritz, it wouldnt explain how mine and my brother suddenly have issues with our home buttons at the same time. Both of us had a time where the home button didnt respond at all. and its been intermittent ever since. Anybody that has an answer or another case like this I' d like some information

Reset Home button steps:
(1) Tap Settings App, when it is open:
(2) Hold Power button until "slide to power off" bar appears.
(3) Don't slide it, release power button.
(4) Gently, continuously press Home button for few seconds until home screen appears.
(5) Done.
If this does not help, further points to Hardware Problem.

Has anyone had issues with their itunes not coming up?

Has anyone had issues with their itunes not coming up? I keep getting error message 13014. I just bought a new classic ipod and am not sure if this is the problem.

Hi
Your new iPod has certain operating system requirements. Does your iMac meet those requirements?
http://www.apple.com/ipodclassic/specs.html
3rd Column on the right hand side, about a 3rd of the way down. To find out which version of iTunes you have, launch it and select "About iTunes" from the iTunes menu.
HTH?
Tony

Does anyone have issues with start up time

does anyone have issues with start up time

Have you tried a reset?
Press & hold both Home & Power until you see the Apple logo.
If that doesn't fix it, restore it as new and see if that fixes it.

Does anyone have issues with your battery in the iPhone 5 having to be recharged 2 to. 3 times daily?

Does anyone have issues with your battery in the iPhone 5 having to be recharged 2 to. 3 times daily?

Only concrete way is to use it less sorry see here every method possible has been tried
https://discussions.apple.com/thread/4329696?start=2970&tstart=0

Does anyone else have issues with Verizon LTE service on the new iPad?

I have the new iPad. I have noticed that issues with the LTE signal have gotten progressively worse. When my iPad is sitting in 1 spot it will switch from 3 bars, to no service, to 3 bars, and so fourth. I might be on a website, or in an app that is using data and it works great. Then at random it says No Service again. I just added my iPad to my Verizon account with their new family data plan, so they sent me a brand new SIM card. I feel like I can rule that out.
I just want to know if anybody else has an issue with their iPad dropping service at random and jumping all over the board. I also have an iPhone on Verizon and it is with me always, I never have this problem with the iPhone. My iPad will say No Service but my iPhone will show nearly full service.
Just to add, I have switched off LTE for periods of time to see if things change. (that way both my iPhone and iPad are on 3G so I can compare) Things are no different when just running LTE.
Any thoughts would be appreciated. I am under warrenty and I have Apple Care. I hate taking stuff in and replacing it if I don't need to.
I am also signed up with a developer account through Apple, and my iPad has iOS 6 beta. This problem did not start with the beta software. It was the case before and after. I guess I was hoping if it was an issue Apple would address it with one of the revisions in iOS 6, but now I am starting to wonder if it is hardware.
Thank you.

Try looking/posting here.
Adobe Support
Adobe Forums

Did anyone have issues with losing their ringtones when updating itunes?

I lost all my ringtones when I updated my itunes. which is not good because i cant redownload them. Anyone know what happened tried to restore old backup and they didn't restore that way either.

Hi WolfStorm102,
Welcome to the Apple Support Communities!
I understand that your ringtones are missing after you performed an update to iTunes. You are correct that ringtones cannot be re-downloaded from the purchased section of the iTunes Store. In this situation, you may need to either use the report a problem link with your purchases or contact iTunes Store support. You can use the following article as a reference.
Download past purchases
http://support.apple.com/kb/ht2519
Get help
You may find the answer to your question below:
If your download was interrupted, learn how to resume the download.
See what to do if you have trouble using an app.
Make sure your computer is authorized using the Apple ID that you used for the original purchase.
Make sure your iPhone, iPad, iPod touch, Apple TV, Mac, or PC is associated with your Apple ID.
Make sure you’re in a country where iTunes in the Cloud is available.
If you’re having trouble downloading an item, make sure you can download the item again from iTunes in the Cloud. You may want to sync the content to another device instead.
If you can't find the item that you purchased in the iTunes Store, report a problem with the item. You can report a problem with a purchase made within the last 90 days.
If you have a problem with an older purchase, contact iTunes Store support.
The last two bullet points would apply to your situation with the ringtones.
I hope this helps,
-Joe

Anyone have issues with "touch screen" not responding?

Does anyone find that the touch screen doesn't respond? I have huge issues with this style.
Touching and swiping on a screen that is 1.5 inches isn't fun. I need shade to read the screen (bad for snow), I need to go thru so much just to get to a song, a podcast, whatever that was playing before I HAD to turn off nana. I need to turn off nano each time.
1. Turn on by holding button like forever.
2. swipe, swipe, swipe, swipe to get to songs or podcast. Select, select, touch selcet, not selecting, touch, touch touch.
3. Select 'songs; selevet something else to get to a screen that says shuffle.
4. Select, select, touch, touch, use index finger, thumb, touch, breath on finger, touch again.
5. After one song plays after selecting "shuffle", it repeats, repeats,
6. Take ipod out of pocket, stand in shade, hit the snooze whatever button, to activate screen, Is screen activitated? yes? But it blinked off to quick to make selectioon of touch proof screen.
7. Walk inside to touch screen, to see screen. Hit button, wait for long time for this to start again (much like laptop starting).
8. Swipe to get to menu with songs, swipe, swipe, swipe swipe.
9. Select music: albums, artist songs. By selecting I mean touch touch touch, touch, use thumb, touch. for each selection
10. Are you sure this is an Apple product?
Can I return this POS and wait for someone to go back to what worked best??

Oh, and yes I have restored to factory settings. Then resynch.
I have done the soft reset or whatever it's called on this one.
It is updated.

Has anyone had issues with their HP Lightscribe CD/DVD after a sofware update?

After recently installing software updates from HP and Microsoft my laptop no longer shows the drive with the CD/DVD under Computer. I can install a dvd and hit the Quick Play and it plays fine but it's also a lightscribe dvd burner and I can't send videos or photos to the drive because it's not showing up under the listed drives. Neither are my removable disk flash ports showing up. They were there before the most recent HP and Microsoft security updates installed. When I go to Device Management it shows up there but also shows an error message under the Devices Status: "This device cannot start. (Code 10), Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available." When I click to check for solutions I get the message back that the device is installed and functioning properly. I also checked the device driver and it's telling me it's the correct and most updated driver. i'm at a loss as I'm not at the point where I'm able to replace this laptop which is used for personal and home business use. Does anyone have a solution other than doing a total recovery? I tried taking it back to just before the last update but they're still not showing up. It's like something wiped them out.

Yes with some docks and car systems but I do not remember the specific devices. Sometimes and iOS update breaks compatibility.
Try:
- Go to the dock manufacturers and see what they say. Also see if there is a firmware available for the dock
- Reset the dock
- Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Has anyone had issues with their Gyroscope or Accelerometers randomly breaking?

I had my phone in my purse for a few hours at work and when i took it out again they were no longer working. I didn't do anything (use, touch, drop, etc.) to the phone in that time period and now my phone gets extremely hot when I'm using it or when I'm charging it and the gyroscope/accelerometer no longer work. If i try to use the compass app it just goes on the fritz and the iPhone's parallax effect makes everything shake and swirl around like crazy.
I have a small scratch/chip in the corner of my phone and the Verizon store representative said he wasn't sure if it would be considered damaged or not. The iPhone is outside of the 1 year warranty. I'm not sure what to do but i can barely use the phone now

I understand your predicament radica1! Applications some times fail when system files get corrupted. I have resolved similar issues with my iPhone by doing a hard reset, as this procedure brings the phone back to original factory settings and clears any potential system error. Give it a try http://bit.ly/TDltcJ
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport

Has anyone had issues with their iphone not being able to play music through ihome or other external units after ios7 update?

I have not been able to play music or podcasts when my phone is plugged into my iHome. It did so before the iOS update. It does the same thing with my JBL at work.

Yes with some docks and car systems but I do not remember the specific devices. Sometimes and iOS update breaks compatibility.
Try:
- Go to the dock manufacturers and see what they say. Also see if there is a firmware available for the dock
- Reset the dock
- Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Anyone have issues with their power button on the 928?

Similar Messages

Maybe you are looking for