Anyone have luck with Crodeweavers & Audition 1.5?

Has anyone tried using Codeweavers with Audition 1.5. recording programme?
Is Codeweavers easy to install and use, as opposed to Wine? I downloaded Wine, but it looks so complicated!

Codeweavers has its own forum for help, and is paid for software, which also lists on their website which applications have been tested with it. I would ask in that forum if you don't get an answer here.

Similar Messages

  • Anyone have luck with gnu make in a solaris 8 container?

    global zone running solaris 10 05/08 (480 hw). got a solaris 8 zone up (flash arcive of one of our solaris 8 systems, NICE!!!). got most items working, except i have probs with gmake (gnu make), any version. ive tried older-current, built from src, and binary packages. all have the same prob.
    gmake: *** wait: Error 0. Stop.
    gmake: *** Waiting for unfinished jobs....
    truss (from inside the sol8 zone)
    20050: llseek(0, 0, SEEK_CUR) = 952421
    20050: _exit(0)
    20049: Received signal #18, SIGCLD, in wait() [caught]
    20049: siginfo: SIGCLD CLD_EXITED pid=20050 status=0x0000
    20049: wait()
    havent tried dtrace yet from the global zone. am i missing some type of privilege outside of the default ones? i can compile and build most open src items with the system make, however we have our own products we build with gnu make.

    agreed. though in this solaris 8 zone, i have built openssh, openssl, openldap, mit krb5, sudo, various other gnu utils, and a few more open src projs and all seem to work just fine. test programs ran ok, and i connect via sshd (5.0p1+hpn). we are an isv, and i have had some of our folks run our prods through a bit and so far all those have been ok as well. we are going to run oracle in this env shortly as well as stress test with our prods.
    it would be interesting to see what some of the sun folks have to say. with your change to job.c, i was able to run all the make checks, and have used gmake to build a few projects as well. i probably will see what gmake can do building gcc with -j4.
    very nice find by the way. hope this does raise a few flags with sun as to why this change would be needed.
    for sanity sake: unified diff (prob not formated correctly on this site, ARGH):
    --- job.c.orig 2008-04-29 13:07:09.312266000 -0400
    +++ job.c 2008-04-29 13:07:57.154445000 -0400
    @@ -559,7 +559,7 @@
    else
    pid = 0;
    - if (pid < 0)
    + if (pid < 0 && errno != 0)
    /* The wait*() failed miserably. Punt. */
    pfatal_with_name ("wait");
    Edited by: sid_sanders on Apr 29, 2008 10:08 AM

  • Anyone have luck with wmp54g (rt2500 driver) pci wifi card?

    I tried arch a few months ago but I was unable to connect to my wireless network. Has anyone had any luck yet? Just curious - I would like to use arch but I need wireless/WPA.
    thanks

    I personally have no rt2500 pci, but i have got a rt2500 usb (rt2570).  have had next to _no_ success using the native rt2570 (rt2500 in you case) nor the new experimental rt2x00 from serialmonkey project.
    I'm using it with ndiswrapper atm, and it's really working flawlessly.
    I'm not sure if this is also the case with the native rt2500 driver, but with ndiswrapper you need to be very verbose when connecting to the access point. This is my config;
    wlan0="dhcp"
    wlan_wlan0="wlan0 essid studion channel 6 ap 00:13:46:42:65:22 key restricted s:XXXXXXXXXXXXX"
    INTERFACES=(lo wlan0)
    Basicly, this is a dhcp setup, with a shared WEP key. I had to add the hardware-adress of the access-point (ap hardware-address), since it wouldn't connect otherwise.
    To see the hardware-adress of the ap, just bring ra0 up, with "ifconfig ra0 up", and then "iwlist ra0".
    If i were to connect with a static address i would replace wlan0="dhcp" with wlan0="wlan0 192.168.0.1 netmask 255.255.255.0 broadcast 192.168.0.255" or something like that. I would also  set gateway, and remove the "!". Last of all I would update /etc/resolv.conf with the address to my nameserver. (usually the router. this is automatic with dhcp)
    A nice tip is to remember all those ra0 (or wlan0 in my case) statements all over the place. one mistake and network will not be brought up.

  • Anyone have luck with Android for VPN?

    The internet in general has been unsuccessful with getting Android devices to connect to OS X Server VPNs, at least with Android 4.0 and up...
    Anyone out there care to prove me wrong?
    A little background info:
    I tried PPTP and L2TP
    I tried my website host name as well as its IP address on the internet
    iPhones and Macbooks connect just fine

    I was using Purevpn and my HTC Desire X worked like a charm.. Though i Dont know how!!...maybe its the service you are using.

  • Does anyone have experience with having multiple editors work on the same project from different computers?

    Does anyone have experience with having multiple editors work on the same project from different computers?

    As much as I hate to admit it, YOU ARE RIGHT!
    I will tread lightly on this project.
    Thanks for the sanity check,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Photoshop cs6 won't allow me to highlight my existing text layers. Does anyone have experience with this problem?

    Photoshop cs6 won't allow me to highlight my existing text layers. I select the text tool and the text layer I want to edit, hover over text and each time I attempto to edit a new layer is created. Does anyone have experience with this problem?

    Be sure you go to Adobe's Web Site and make sure there are no Updates for CS6
    http://www.adobe.com
    Remember if you have trouble with a software issue it is the software and not caused by the Mac you are using
    Many users simply don't remember when you upgrade software you normally have to go to 3rd party web sites and update software as well.
    Cheers
    Don

  • Does anyone have experience with unzipping a password-encrypted ZipFile??

    Does anyone have experience with unzipping a password-encrypted ZipFile??
    My Zip Class works fine with every unencrypted file, but when I try to open an encrypted one, i get an error Message ("Encrypted ZIP entry not supported")
    Is ist impossible to unzip encrypted ZIPs???

    I've searched around a little bit and THIS IS THE SOLUTION!
    There is a (beta)version of winzip8 that uses a cli (command line interface)
    So, all you have to do is to implement a Runtime.getRuntime().exec(...) in your java program to call winzip8 and pass the zipfile path and the password.
    Here's the URL: http://www.winzip.com/wzcline.htm

  • Anyone have problems with apple ID's? I have the correct ID in my settings but when I try to update my apps my ID shows my first name and last name but not my ID? I'm not sure what else to do because I've made sure I have the correct ID in my settings!

    Anyone have problems with apple ID's? I have the correct ID in my settings but when I try to update my apps my ID shows my first name and last name but not my ID? I'm not sure what else to do because I've made sure I have the correct ID in my settings! Anyone else have this issue?

    I think its meant to show your name, not your ID.

  • Does anyone have experience with Virgin or Boost Mobile?

    I have been with verizon for a long time...I have 4 lines with this service. I have since bought several phones off of craigslist or ebay just so I wouldn't have to be subjected to the tier plan. We use so much data it's crazy. I want the new Samsung Galaxy S4 so bad!!! Grrr! I've even thought about switching to Virgin Mobile or Boost Mobile. We pay so much for our phones now and I know of one guy who has boost mobile and loves it. Does anyone have experience with these providers?

    BC's CRM is part of the package, Salesforce is of course more dedicated. That pretty much sum's up these sorts of use cases.

  • Does anyone have experience with using a Canon Vixia HF M52 Camcorder with Final Cut Express?

    I'm looking to purchase a new camcorder that is compatible with my Mac OS X (10.6.8) that will work well with Final Cut Express 4.0.1  I have downloaded the camcorder support info from Final Cut Express that list many capital camcorders.  I've used Sony tape based camcorders in the past.  I'm looking for High Definition.  I can stick with a tape based camcorder, but thought I would look at the Canon Vixia HF M52 as an alternative, which is listed as compatible.  I would like to download directly from the camera to FCE.  I film in the wilderness, like having an optical zoom of 20 or greater (yes, I use a small tripod). Does anyone have experience with the Canon Vixia?  And if not, but you really like another camcorder that you can recommend, what is it?

    The Vixia HF M52 is an AVCHD camcorder and should work perfectly fine with Final Cut Express 4 (4.0.1).
    The published "camcorder support list" has never been up to date and I would not take it to be a definitive list of compatible camcorders.
    One note, however, the Vixia HF M52 supports a number of different shooting modes.  I suggest sticking with the AVCHD 1920 x 1080i / 60 fps mode for use with FCE.   FCE does not support progressive modes except in 720p25/30 (which the M52 does not seem to shoot anyway); nor does FCE support any 24 fps modes.

  • Does anyone have problems with iTunes movie rentals freezing in the middle of the movie?

    Does anyone have problems with iTunes movie rentals freezing in the middle of the movie, requiring a force quit, which causes your rental to disappear? This has happened multiple times to me recently. Last time Apple didn't refund my money after reporting the problem. I have been using iTunes for many years but am about to give up.

    Correction: I was refunded for the previous movie freeze.

  • Does anyone have experience with migrating applications from iAS6.0 SP2 to SP3? Did it go smoothly or are there problems to be expected?

     

    Hi,
    I haven't. But, there are lots of changes from each service packs,
    henceforth you may have to stick to what the documentation says to avoid
    the errors that shoots up. Again, the errors depends upon how you have
    coded your application. Please let me know if you have encountered any
    errors and the messages for me to help you.
    Regards
    Raj
    Peter Clijsters wrote:
    Does anyone have experience with migrating applications from iAS6.0
    SP2 to SP3? Did it go smoothly or are there problems to be expected?
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

  • Does anyone have trouble with the iPad booting you off of the internet?  I will be in the middle of something (i.e. Facebook), and it boots me out and I have to sign in again.

    Does anyone have trouble with the iPad booting you off of the internet?  I will be in the middle of something (i.e. Facebook), and it boots me out and I have to sign in again.

    Jon....
    Don't confuse the threads here with 'typical' experience.  Most of the stuff here is from brand new users, and those that have problems, and considering the 30 million pads in use, represent a very small sliver.
    If you are having repeated crashes it is really pretty basic.  You either have a physical problem with your pad, or you are using too much memory.
    The iOS system is supposed to monitor memory, and shut down previously used apps automatically to free up memory for what you are doing now.  That part of ios is not perfect, and if an app introduces an unexpected memory load, sometimes it gets over whelmed.  
    This happens, more often than not, when using safari with multiple windows open on graphic intense sites.  It can also happen with a memory intensive game, and residual apps in the background.
    Double  tap the home key and take a peek at the recently used list, and shut them down completely, and often the problem goes away.
    If the problem persists, you may have a software issue, and a trip to the genius bar may be in order.

  • Anyone have issues with Sata 3 SSD in the 2011 Macbook Pro

    Hi Guys and Gals.
    Does anyone have issues with the Macbook Pro 2011 Model with a Sata3 Solid State Drive ?
    I have issues and have a Vertex3 made by OCZ. I am in active discussions with OCZ to find a resolution on their end. I have also contacted Apple Care and Intel and have run into dead ends.
    However I am bringing my MBP for a repair, logic board replacement and will post the results after they change the logic board for me.
    Check my thread on OCZ: http://www.ocztechnologyforum.com/forum/showthread.php?89970-A-call-to-all-Macbo ok-Pro-2011-Users-with-SATA3-Issues
    Regards,
    Jase

    Well, my My Genius appointment went very much as anticipated - it might well be a SATA III connection but Apple they do not support SATA III drives - least of all other people's.
    Furthermore, they do not actually support anything other than the original configuration as sold - so given that I bought a 750 GB HD version, that is what I am stuck with - I asked Apple (London Regent St) if they could upgrade it to one of their own SSDs if I paid for it - they could not.  They can only repair the machine to its original condition. They could not even advise me as to what Apple co-branded SSD I should look for to be compatible with this model - 512 Gb drives do come up on Ebay - Apple / Toshiba seems to be the normal one - but they couldn't advise if that would work or not. So it could be good money after bad.
    Anyhow, they finally agreed to swap the cable, for a charge, so that will take two or thee days, plus the 5mins to do the job.  I will post the results of the cable swap when I have it. They could not tell me whether it would be a different version of the SATA cable to the one already in the machine - but I asked to keep the old one so I can see if there is any visible difference.
    It does seem strange that Apple support thunderbolt drives - which you can't even buy yet, but don't support SATA III in either Mac Pro or MAcBook Pro given that the full 3.0 standard was released on May 27, 2009.
    Two and a bit years is a long time in tech terms.
    Stephen
    eni wrote:
    I, as so many others, are also facing issues with my SATA 3 SSD. I've been reading about people having issues on OCZ's forum, on Intel's forum and all over the web. I have a MBP 2011 13" bought last month with the 6/6 setup.
    Hotjase, have you come to understand that the issue lies with the logic board? One would hope that Apple would owe up and come forward if there are in fact faulty logic borards. I have read that Apple have gone from 6/3 to 6/6 and then back to 6/3, though I do not know if this is applicable to all MBP models, or just some. As I sayed, I have the 13" model.
    SdeS, what was the result of your talk with the Genius? Did you receive a new cable? If so what result?

  • Does anyone have experience with error 504 when trying to download a podcast?

    Does anyone have experience with error 504 when trying to download a podcast?  I've been a subscriber for two years without issue and in the last two days can't download this particular podcast (everything else is working fine - music, other podcasts, etc)

    The album was released on the 27th March this year, so the error occurred almost immediately after it was supposedly available.
    In the manage pre-orders section of my account, it says AVAILABLE but does not give me any choice over whether to download it, just to cancel it. Is this normal?
    iTunes customer services reset my password and tried to download the album themselves, but they also got the 5002 error, so it's been passed off to the engineers. How long does that usually take?
    If anyone has any other suggestions, it would be greatly appreciated.

Maybe you are looking for

  • FCP HD cant see video NO WHERE!!!

    Ok here it is last night I imported video in, and now today I went to start working on it and now I cant see nothing, no video at all. I reinstalled my FCP but nothing. When I put clips into my time line all I see is black, but I can hear the sound.

  • Streaming Hardware Recommendation

    Hello, I am trying to find out what hardware products will work to stream HD content from an HDMI camera source to my ustream/stickam/livestream account? I plan on using a laptop as the main encoding station and live streaming straight to stickam/ust

  • FRM-41075-ERROR DELETING GROUP

    HI EVERYBODY, i created a form with one item which z not database item.i created lov based on query.i created a key-listval trigger for item.when i m running my form,i am getting the following error:FRM-41075:Error deleting group.how to solve this er

  • Deploying an App with 'Documents and Data'?

    Hi All, I need to setup 10 iPads with a few applications - using iTunes to restore these iPads rather than download each application 10 times. One application seems to be a launcher for several applications within it that you need to 'Download' withi

  • "Shared with portrait layout"

    "Shared with portrait layout" Help needed! Hi, I'm making a book in landscape mode, but I want to see some pictures in portrait mode. I try in de layout section: Section pages, to get it done. But every time the "Shared with portrait layout" box is g