Anyone have photo/photos of T510 FHD screen in Win 7? Curious how it looks.

Finger on the order button, only choice left is FHD or HD... no experience with either.  Ugh.
Solved!
Go to Solution.

the FHD on the W510 and the T510 should have the same spec. The above picture is a W510 with FHD. 
HD+ is ok, but i will avoid HD one if you are going to do photoshop stuffs. 
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

  • Does anyone have photos of a good ACD 23"?

    I need some technical help from users with good ACD 23" screens. I need to see some photos of good ACD 23" screens so that I can decide if it's worth returning my bad screen again for another replacement or not...
    I've been following these threads since August 04 hoping that Apple will solve the ACD 23" color problems described and shown on this page:
    http://DreamLight.com/insights/bugs/hd23.html
    I'd like to have my replacement unit either repaired or replaced again, but don't want to waste my time returning it again if it won't help.
    At this point I've seen a few posts from users who claim to have "good" ACD 23" screens. So far though, I have not seen any photos that bear out those claims. I'd like to see photos of "good" ACD 23" screens (23" only, that's the one with the worst color consistency) showing a solid white and solid gray desktop so that I could see for myself if there really are any "good" ACD 23" screens out there yet...
    I can't simply rely on any verbal descriptions from anyone else because different users have different color sensitivity and different color needs. Something that looks great to one user may not look so great to another user who may need more consistent color.
    I'm sure that a stereo that sounds fine to me may not sound so great to a professional musician... and I'm sure that such a professional musician wouldn't rely on other's descriptions of such a stereo, he'd want to hear it for himself...
    One example of why this ACD 23" causes problems for me is that if the Photoshop tool palette is on the left side of my monitor in it's default location, and I put white into the color chip, it looks like light yellow rather than white. Something on the left of my monitor looks warmer than it is and something near the center looks cooler than it is... All this can wreak havok when you are working with subtle color, if you can't rely on what you see...
    So, if you have a good ACD 23" (23 inch only, that's the one with the worse color problems) and would like to show it, please take at least two digital photos of it. One with a solid white desktop and one with a solid medium gray desktop like the photos referenced above. Post them on your web page and post a link here. That way we can all judge for ourselves if any of the ACD 23" screens have good enough color for our own purposes...
    Thanks,
    -MikeS
    PS. Please stick to the specific technical subject of this thread without drifting off into any marketing issues or flame wars or this thread will probably be deleted just like the previous one was... I really just want to see some photos of a good ACD 23" in order to decide if I should return my existing bad ACD 23"... I'm sure it would give a lot of us on this forum some hope as well...

    Thanks for posting the photos.
    Unfortunately it looks like you're right David... the white photo shows the left edge has the dingy yellow and the gray photo shows the wide vertical band just left of center... It's not as bad as my screen, but it's still there, and mine got worse over time...
    If you can't see it, just open the gray image and try scrolling it to the left and right. You then should be able to see the bluer/darker area of the photo moving left and right on your screen quite easily...
    Well, it's not as bad as mine, but it still shows the exact same problems (yellow sides and blue band just left of center) in the exact same places. But I don't see the pink problem that some of them have as well... mine has all three problems...
    Anyone else out there have any photos of a good ACD 23"?
    -MikeS

  • Anyone have a small speck/dot on screen in their FaceTime calls?

    I have 2 white  5's (16gb & 32gb)  and I've noticed when I open the FaceTime camera there is a small white speck/dot that appears on the screen almost right in the middle of the screen. It doesn't appear on the regular camera screen or any other time so I'm assuming its actually in the front facing camera. Anyone else haw this issue?

    Thank you guys for ur replies but my question is still unanswered.
    I know about the 'E' symbol turning circular and the three spots on the iphone screen. What I mean to say is that there is an extra blue spot (very small)which looks as if there is a dead pixel or something like that. it appears exactly below the Messages icon (if seen on the first page of screen). when I rub it few times it disappears for a second and it again reappears.
    Any suggestions....

  • T510 FHD screen--trying to max the brightness outside.

    i love thinkpad's matte screen--very little glare.  However, i use it outside a lot in sunshine, so need it to be really bright enough to see.  The FHD is bright, but want it a bit brighter.  i've tried all the windows and lenovo settings and gotten it as bright as it can go.  i also upped the brightness in the Intel HD control panel, in the color settings.  However, i see that, in the screen resolution settings, under advanced settings/color management/advanced, lenovo lets you change the device profile from the system default (sRGB IEC61966-2.1) to Lenovo Thinkpad MaxBright Display.  is that something i should stay away from for some reason?  is it maybe analogous to the old "overclocking" concepts?
    thx,
    jeff

    Hi Having Trouble,
    Thanks for visiting Apple Support Communities.
    If the brightness on your MacBook Pro isn't adjusting as expected, try resetting the computer's PRAM first. This step can help with many display-related issues.
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone information.
    Best,
    Jeremy

  • My wifes new iphone 4s doesn't have a contact app on the screen ???? only can look at contacts after opening phone app

    Her phone is a bit different than mine a iphone 4 I don't know why she doesn't have the contact app on the main screen ??

    Starting in iOS 5, the Contacts app is inside the Utilities folder. Click and hold the app for a couple of seconds to move it out of the folder and onto a home screen.

  • HT3302 hi i have a crack in my ipad screen can you tell me how i can get it fixed please

    i have a crack across my ipad, it is less than 1 year old and i am trying to find out how much it will cost to repair it or where i can get this done
    thankyou

    Out-of-Warranty Service
    If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below.
    iPad model
    Out-of-Warranty Service Fee
    iPad mini
    $219
    iPad 3rd, 4th generation
    $299
    iPad 2, iPad
    $249
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.

  • After receiving 8.0 I have a gray bar across the screen above my tabs. How do I get rid of it?

    When I R click on it the The Tool Bar Menu drops down, nothing when I L click.

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • I have photos from several cameras of the same event, how do I combine them?

    I have photos from several cameras of the same events.  How can I sort them together, three pics of the same horse from three cameras side by side; I can't move pics from one camera source to another in a folder.

    Languare is critical since it is all we have to communicate with
    Folders in iPhoto do not hold photos - folders hold only other folders or albums
    If you are speaking of events then you simply merge the events (drag one onto another or select two or more and use the merge events command - for the photos to be "side by side" the three camera's time/date setting will have to be identical as photos will be sorted by time/date - if they are not you can correct by selecting the photos in an event (before merging) and using the adjust time and date command or you can make a smart album for the camera and select the photos and use the adjust time and date command
    LN

  • I have photos in Adobe Photoshop Album Starter edition 3.0. How can I burn these to a CD?

    I have photos in Adobe Photoshop Album Edition 3.0.  How can I burn these to a CD?

    Numerous programs can do this, including stuff that came with computer.

  • HT4307 My screen is frozen on pogo games, unable to fix it, anyone have any ideas?

    My screen is frozen on pogo games, unable to fix it, anyone have any ideas?

    If your screen is frozen and you can't push the home button to return to the home screen, reset the phone by pressing the home button and the sleep/wake button on top simultaneously until the grey apple appears.
    If the screen only freezes while you're using the app, you should delete and redownload the app.
    If that doesn't help, you would need to contact the app's developers because apple doesn't support any apps that they don't make

  • What in the name of Goodness have you done re: the full screen picture of Contacts on my iPhone? Sort it out Apple or I'm going back to Samsung, where maybe I should have stayed!

    What in the name of Goodness have you done with the full screen picture of Contacts? How dare you just change it without so much as a bye or leave? This is NOT progress but a throwback to about 1997! I supposedly 'updated' to an iPhone two weeks ago. Should have stayed with Samsung I reckon. I am deeply unimpressed!

    Bechepeziere wrote:
           Who in that organisation actually decided this was progress? Unbelieveable!
    stedman1 did it, yep, he's the one, blame him .

  • Is anyone have an example code on CAN Periodic Transmission

    I'm looking for an example code for a CAN periodic transmission in Labwindows CVI, because the example deliver with NICAN is not interesting for me.
    If anyone have an example code,

    Hi Lilian,
    The Obj2Obj.c example shows how to configure a CAN object for periodic Tx (one frame each second).
    In this case, the write queue length is set to 0, which means that the last written value is transmitted. You can set a non-zero queue length to transmit a set of frames.
    DiegoF
    National Instruments.

  • Today, after having published my website without difficulty for years, I got an error message saying that the file format was unrocognized.  Anyone have any suggestions.

    Today,  after having published my website without difficulty for years, I got an error message saying that the file format was unrocognized.  Anyone have any suggestions.

    You need to give some more info.
    How are you publishing your site - iWeb FTP or another application? If the latter, is the encoding set to Unicode (UTF-8)?
    Who is giving you this message - the server?

  • Anyone have some real-world experience with clustering and RMI?

    We are getting ready to do some stress testing on a clustered WLS RMI
              environment. Does anyone have any real world experience with this type
              of environment. I'm looking for information related to performance
              (transactions per second), how does it scale as you add new instances
              (does it get to a point where another instance actually degrades
              performance), how easy is it to administer the cluster?
              Any input would be greatly appreciated,
              thanks,
              Edwin
              

    Edwin:
              You might also want to refer to my earlier posting in this newsgroup re:
              setting an optimal value for executeThreadCount and percentSocketReaders
              on the client side in a cluster setup. Look for the subject "variable
              performance in a cluster".
              Srikant.
              Edwin Marcial wrote:
              > We are getting ready to do some stress testing on a clustered WLS RMI
              > environment. Does anyone have any real world experience with this type
              > of environment. I'm looking for information related to performance
              > (transactions per second), how does it scale as you add new instances
              > (does it get to a point where another instance actually degrades
              > performance), how easy is it to administer the cluster?
              >
              > Any input would be greatly appreciated,
              >
              > thanks,
              >
              > Edwin
              

  • When I use the type tool or the selection tools, my photos blink between the photo and a black screen.  Anyone else have this issue?

    When I use the type tool or the selection tools, my photos blink between the photo and a black screen.  Anyone else have this issue?

    Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?

Maybe you are looking for