Anyone have problems opening MPEG2 files in 10.7?

Thought 10.7.4 can open mpeg2 files, but says codec is missing. However same files can be opened by 10.5 Quicktime pro 7.  Thought 10.7 had mpeg2 codec. Am I mistaken? Is there anyone who can open mpeg2 files in 10.7.4?
Thanks
Leo

Thanks to the Support Communities, I found the answer. Downloaded Perain, from macupdate. Now mpeg2 files readable.
This is the solution from always adopted to uniform the different video codechttp://www.macupdate.com/app/mac/22923/perian
Thanks

Similar Messages

  • TS2551 I have problem opening this file. It just take hours and hours incircle but nothing happen. Please help ! I would like this app to be reinstall.

    I have problem opening this file. It just take hours and hours incircle but nothing happen. Please help ! I would like this app to be reinstall

    What file? Does this involve iPhoto somehow?

  • I have problems opening PDF files on Palm Pre using Telcel (Mexico)

    I've tried to open a few digitalized books in pdf format in the Palm and the machine tells me "Excuse me there is an error", I'll explain with details below. The files do open correctly on a computer.
    The files do open, but if you leave the palm idle for enough time for the machine to turn off, when you attempt to access the file after this it gives me an error message stating it can't review the file. The text of the book that I leave it be when I leave the palm idle when I reaccess it after idle mode stays literally frozen. You can close the software (pretty much the only option available since it froze).
    Sometimes the file works fine, but other times it doesn't. The problem arose when I downloaded a few Operating System WebOS 1.4.0 updates in spanish.
    Thanks for your help!

    If I read your issue correctly, the PDF viewer is locking up and becoming unresponsive after the screen times out or goes dark. If this is the case, this is an issue that has been reported by Palm and forwarded to our engineering department. At this time we don't have an ETA on when this will be resolved.
    Life moves fast. Don't miss a thing.
    TreoAide

  • I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. Some contacts have problems opening files sent by me using Mail too. This was never a problem on pre-Intel. A real Mac **** up !

    I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. And some contacts occasionally have problems opening files sent by me using Mail too. This was never a problem on pre-Intel Mac. A real Mac **** up ! Any ideas ?

    Can you drag and drop the attachments visible in the email to the Desktop OK or does that fail ?
    Re the sending: Are these recipients on Mac's or PC's as the file type could be an issue, if on Mac's then try setting the Mail Preferences Composing setting to Plain Text not Rich Text and see if that improves things.

  • Problems opening pdf-files from KM of portal

    Hi,
    we store documents in our portal in KM. When I use pdf-files that where not saved with Office2007 tools I get the problem, that I can open the file once. If I open it the second time I get the error message "file doesn't start with "%PDF-". and the file will not be opend. If I delete the temporary files in the internet explorer, the file can be opended, again.
    If I open the file directly in the internet explorer I don't have those problems, so it seems, that the portal uses a different viewer than the internet explorer itself. 
    Has anyone an idea how to solve this problem?
    Regards
    Ulrike

    Ulrike,
    I think this is a known issue.
    Affected versions:
    o KMC SAP NetWeaver 7.0 (formerly named 2004s) SP 14
    o KMC SAP NetWeaver 7.0 (formerly named 2004s) SP 15
    If you have the above KMC and SP Versions then you need to follow the below SAP note:
    Note 1146711 - Problem opening PDF files.
    Have you checked the belowSAP Note?
    Note 954627 - Issues with opening/displaying PDF files from KM
    Regards,
    Karthick Eswaran

  • I'm having a problem opening my files -..

    I'm having a problem opening my files …..for example if i want to download something off the internet and run it after it always opens in Textedit which is annoying…..other programs open fine which are dmg but the exe files won't run….i need help

    If you are in fact running Mac OS 9 or earlier, which is from 2001 or earlier, .dmg files are disk image files like the .smi files used under Mac OS 9, but they are only Mac OS X compatible.   They are frequently used to store Mac OS X only installer disk image files.  .exe files are are Windows and MS-DOS executable files which can only run with Windows or DOS virtualization:
    https://discussions.apple.com/docs/DOC-2741
    Most Mac OS 9 programs you'll be able to download either have a .sea, .sit, or .hqx suffix in their file name and are able to be opened with the old Mac OS 9 copy of Stuffit Expander.
    If you are using another operating system, please go to Apple menu -> About this Mac and tell us what you are running.  You posted to the Mac OS 9 forum, hence my response.    If there is an X in the name, you posted to the wrong forum, and I'll have this post redirected and try to answer if I have time.

  • Problems opening PDF files

    When I visit web sites using PDF I always have problems opening them. I get the following message each time:
    The Adobe Acrobat/Reader that is running can not be used to view PDF files in a web browser. Adobe Acrobat/Reader version 8 or 9 is required. Please exit and try again.
    I do have the latest version of Adobe so curious as to why I'm having these problems. If it helps I'm using Windows Vista and have a Sony Vaio laptop.
    Thanks in advance for any help.

    Thanks for your help. I think I may have solved the problem. I uninstalled Adobe reinstalled but ignored the update for it and it appears to work okay. So, from my expereince it could be the update that could be the problem, though I have seen through the forums different things work for different people.

  • HT5678 I have problems saving pdf files in the web when I use Safari. I don't have this problem with firefox

    I have problems saving pdf files in the web when I use Safari.  I don't have this problem with firefox.

    do they save ok if Safari - Preferences - Security - Allow all other plug-ins is unchecked ?
    If so, likely an adobe or other pdf plugin
    Re-check the setting above & quit any browsers,
    Look in this folder by triple-clicking the line below, then ctrl-clicking it & choosing Services - Open
    /Library/Internet Plug-Ins/
    remove anything with pdf in the filename & test again
    Sometimes, plug-ins can be in the User Library folder :
    ~/Library/Internet Plug-Ins/

  • Problems opening EPS-files in Illustrator CS5.1

    I have problems opening some EPS-files that I downloaded from Shutterstock. Their support person told me to contact your support. I’m using Illustrator CS5.1 on a PC. When I try to open the files Illustrator's suddenly not responding and I have to close the program to continue.

    Hi Lotta,
    Will it be possible for you to share with me any one of the EPS file with which AI is crashing ?
    Thanks & Regards,
    Raghuveer Singh
    [email protected]

  • Problem opening PDF files with adobe

    I cannot get adobe to open my pdf files. Not from internet nor from desktop.
    I downloads fine,. I have installed and reinstalled several times.
    If I try to open it looks like it opens but closes immediately. I tried to open adobe, but nothing. A grey screen and that's it. I cannot access the help button

    Yes, I finally got it working using number 2:-) Thank you very much
    2013/8/1 Pat Willener <[email protected]>
       Re: Problem opening PDF files with adobe  created by Pat Willener<http://forums.adobe.com/people/pwillener>in
    Adobe Reader - View the full discussion<http://forums.adobe.com/message/5557146#5557146

  • Does anyone have issues opening itunes? each time i open i'm shown the 'agreement' box

    Does anyone have issues opening itunes? each time i open i'm shown the 'agreement' box and have to click on agree, then set up my page each time

    mandpw wrote:
    I'm running McAfee, but this is a brand new problem.  Never happened until last ITunes update.
    because McAffee doesn't like the new iTunes update.
    Post over in their (McAffee) support.

  • Problem opening pdf file from an app built by Flash Builder 4.5

    problem opening pdf file from an app built by Flash Builder 4.5

    The iPad and iPhone have NEVER supported Flash and never will. In fact, Adobe is no longer distributing Flash builds to mobile devices.
    Time to move on...

  • Does anyone have problems with Mail (Display on the right) ?

    Hi to everybody !
    Does anyone have problems with Mail (Display on the right) ?
    What could be the cause of not displaying HTML correctly ?
    Could it be because I use SIMBL, that allows me
    to have Colourful SideBar ?
    Best regards
    Vialatte

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • I am trying to delete pages from a PDF file. I opened the bookmarks, selected the pages to delete and choose Edit Delete. The selected pages are not deleted. Note: I have to open the file using a passport provided by an external party.

    I am trying to delete pages from a PDF file. I opened the bookmarks in the PDF file, selected the pages to delete and choose Edit > Delete. The selected pages are not deleted. Note: I have to open the file using a passport provided by an external party.

    Resolved

  • TS1702 i've an iphone 3.1.3. sometimes, i have problems opening all the apps i downloaded in the past 4 months. other apps would open but the recent ones will begin to boot and then close itself. once, it persisted for over a week. pls help as am frustrat

    i've an iphone 3.1.3. sometimes, i have problems opening all the apps i downloaded in the past 4 months. other apps would open but the recent ones will begin to boot and then close itself. once, it persisted for over a week. it staarted again this evening, pls help as am frustrated. NB- i checked for apps update but all my apps are up-to-date. CT

    Try the usual steps: restart, reset, restore.
    http://support.apple.com/kb/HT1430
    http://support.apple.com/kb/HT1414
    If restoring using a backup doesn't help, try restoring the iPhone to factory settings and try for a while with just the Apple-included apps, to make sure it's not an issue with a third-party app. If it still has problems, it may have a hardware problem and will need to be sent to Apple.
    Regards.

Maybe you are looking for

  • Kde: lipstik, dotcurve, kpager2, taskvar v2, kio-locate

    lipstik - style based on plastik PKGBUILD pkgname=lipstik pkgver=1.0beta1 pkgrel=1 pkgdesc="Based on the plastik style, Lipstik is a purified style with many options to tune your desktop look." url="http://www.kde-look.org/content/show.php?content=18

  • AIP-50547 - TPA Not Found - Not Picking up Sender ID (re: "test")

    I am getting closer and closer here. I have created an 850 with ACME as the sender, and the host being GlobalChips, but now the system thinks that a sender called "test" is in the edi packet. Does anyone have any ideas here ? I also made sure that my

  • Very very slow internet for 2 days

    i hve a two year deal with the worst broadband ever, sky fibre, how do i get out of it? i would rather go back to dial up. sky online assistance is no good, and i don't have time to wait on the phone an hour. talk about being ripped off. 

  • Oracle migration from Solaris 64 sparc to Solaris x86-64

    Now that Solaris x86-64 is supported in Netweaver 2004s SR1, I was wondering about the migration path. Would this be a heterogeneous migration or a homogeneous migration. or to put it another way Export/import to migrate or backup/restore???? No docu

  • What does the empty() method do exactly?

    Any help appreciated, can't find it in here http://www.adobe.com/devnet-docs/edgeanimate/api/current/index.html - is there another doc i should be reading?