Anyone have SAP GRC CUP LDAP connector using port 636 SSL working?

Hello,
I wanted to verify if anybody connects to an eDirectory (or any other) LDAP in CUP using SSL port 636?
Statement I received from SAP is that this is not supported in CUP, and only non SSL connections to LDAP work. I just have trouble to believe this as SSL would be best practice in any company.

Pados,
  By using STUNNEL, CUP will not know about SSL. CUP will always think it is a regular connection but stunnel will send SSL connection to LDAP. Here is the link:
http://www.stunnel.org/
Regards,
Alpesh

Similar Messages

  • Role Upload template for SAP GRC CUP 5.3

    Good Morning / Afternoon / Evening SAP Security Gurus,
    I am looking to upload end user roles via a role upload template spreadsheet for use in SAP GRC CUP 5.3.  I am referring specifically to the recommended template mentioned in step 11 of the 5.3 Post Installation CUP guide, so that roles can be picked within ERM for workflow.
    According to the guide, it recommends uploading from the backend systems via a spreadsheet - any template versions or advice on finalising this would be most appreciated.
    Best Regards
    Steve

    Thanks Ashish,
    Someone else recommended this option as well via another forum. Have tried it out and working fine. 
    Thanks for the reply
    Steve

  • I'm working in Photoshop CS6 on a Mac and am having trouble when I select a Path it automatically feathers the selection border. I can't seem to find any place to adjust a feather setting. Does anyone have a suggestion? I'm using paths to silhouette an im

    How do I change a default from feathered edge to sharp edge when I select a path?
    I'm working in Photoshop CS6 on a Mac and am having trouble when I select a Path it automatically feathers the selection border. I can't seem to find any place to adjust a feather setting. Does anyone have a suggestion? I'm using paths to silhouette an image on a photograph to use in another document and I need a hard edge on it, not a feathered one.

    In the Paths panel, click the flyout menu (in the top right of the panel) and choose Make Selection (this option will only be available if you have a path selected). Reduce the Feather Radius to 0 (zero) and click OK. This setting will be the default even when clicking the Load Path as Selection button.

  • I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

    I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

    Just create a new AppleID for your work.
    As Allan suggested, items purchased on one iTunes account cannot be moved to the other account.
    However, you can put items purchased on on account onto the other iPhone.

  • My work has an iTunes account and i have my personal account but i use my laptop at work with there apps. is there a way to have both accounts on same computer

    my work has an iTunes account and i have my personal account but i use my laptop at work and at home, with there apps /music then my personal apps/music. is there a way to have both accounts on same computer?

    there is software called iTunes Account Switcher

  • I can not sync my IPhone to My Imac. I have the latest version of ITunes on my Imac. I have tried reseting my phone (3), changing ports. Nothing works. I was thinking maybe my phone has the earlier version of ITunes but I can't update it.

    I can not sync my IPhone to My Imac. I have the latest version of ITunes on my Imac. I have tried reseting my phone (3), changing ports. Nothing works. I was thinking maybe my phone has the earlier version of ITunes but I can't update it.

    Did you already have a look at this article?
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Has anyone succcessfuly implemented oid = iplanet ldap integration using ODM

    I am trying to configure the execution and mapping tab in ODM but don't know what 'agent execution command' is. Also do I need to have admin type of account on the remote ldap to import into OID?

    I am trying to do the same thing.
    The agent execution command should be empty as per the documentation refer to C.34 OID Admin guide R 9.2.
    As for the user this is what the Documentation says
    "Connected Directory Account -
    (orclodipConDirAccessAccount)
    Valid user account on iPlanet Directory Server that the iPlanet Connector uses to access iPlanet Directory Server. If the changes are to be imported from iPlanet Directory Server to Oracle Internet Directory, then this user account should have read privilege in the iPlanet change log container. If the changes in Oracle Internet Directory are to be exported to iPlanet
    Directory Server, then the user must have add/modify privileges to the synchronization domain.
    Note: Create a user account in iPlanet exclusively for the iPlanet connector for synchronizing. "
    Let me know if u r successfull. Hope this helps.
    Vinodh R.

  • SAP GRC CUP password issue

    Hi,
    to get user password, i set email reminder, closing as send password in mail No and password display period : 0.It throws a password as sap default string .How can it be standard password,so user can reset by entering it.In SAP GRC 5.3 AC-CUP 5.3_05.0, I can't see password self service tab too.Is there any better way so user can get password in email as sap standard in 8 words (number , letters or any special characters as set like us).

    when i try to create request type for password self service. i have only these actions to select
    CREATE_USER  Create User 
      CHANGE_USER  Change User 
      DELETE_USER  Delete User 
      LOCK_USER  Lock User 
      UNLOCK_USER  Unlock User 
      ASSIGN_ROLES  Assign Roles 
      SUPER_USER_ACCESS  Super User Access 
      USER_DEFAULTS  User Defaults 
    i can't see any action for password self service in configuration->request type-> create  option.please answer it.

  • HT4623 Anyone have trouble with iPhone 5c when using Siri?

    Anyone having with iPhone 5c when using Siri?

    I have a problem when I am using the SIRI and have # contacto, for example mark with siri #995012607.

  • Generic LDAP Connector used against AD

    I am trying to use the generic LDAP connector to provision to a development AD. The only port available is 389 so the AD MA cannot be used because it requires 88 for Kerberos. 
    The generic LDAP hangs during configuration after the Configure Anchors screen.  The release notes say that it will work against 3389 on a GC.
    Is there some special set of choices to configure this to connect to Active Directory?
    Randy

    I let the process run for about an hour and the MA create wizard moved to the next step. It took about an hour on the last property panel of the create wizard as well. The configuration was limited to just the Users container and only the user object type
    and only a handful of attributes.
    Randy

  • Just updated iTunes now it freezes and crashes my computer? anyone have a solution? I'm using windows 7 home premium

    My iTunes has been freezing when it opens then crashes my computer. I have uninstalled it, reinstalled, updated yet it still will not open? I am using windows 7 home premium 3.2GHz with 4Gig of ram. All my other programs work flawless but iTunes will not? anyone have a solution?

    Having found a working library file it may pay to copy it into the standard location and reconnect to it there. See Empty/corrupt iTunes library after upgrade/crash for the steps I would normally have given.
    tt2

  • SAP GRC CUP Getting message "Some unmitigated risks exist".

    Hi,
    when there is one profile or role,when approver mitigate the request.It gets message" Some unmitigated risks exist".
    Already it's configured as unchecked for "Allow Approvers to approve access, despite any conflicts" in GRC CUP.
    Any advise or solution.
    Thanks
    shahed.

    Hi Shahed,
    When u you the seeting "Allow approver to approve dispite Risks" as unchecked. This setting exist at stage level as well as at global level. Stage level setting get the preference. With this setting Approver will not be able to approve the request untill all risks are mitigated or no risks exists. It will show an error some unmitigated risk.
    Kind Regards,
    Srinivasan

  • Anyone have a syggestion on how to get my Ipod touch working again besides putting it into restore mode

    Anyone have any ideas on how to get an Ipod touch to charge or sync without putting it into restore mode, I've prettymuch tried everything thats been put online so far

    Tried DFU mode?
    To do this follow these instructions:
        1. First, Open up iTunes, plug in your iPod Touch/iPhone to the Computer's USB port. Turn on your Computer's speaker and make sure it is loud enough that you can hear it.
        2. Hold down the Home button (top left for iPod Touch and top right for the iPhone with the screen facing you) and the Power button (located on the front bottom of your iPod Touch/iPhone) simutaneously, until the screen goes black and the device turns off. (past the red slider/slide to power off screen)
        3. Now let go of the Power button, but continue to hold the Home button. Your iPod Touch/iPhone should have turned off and the screen should not be on.
        4. After around ~10-20 seconds, you will hear a noise (beep/ding) from your Computer as if it had just recognized a new hardware device, now iTunes should recognize it in DFU mode.
        5. After iTunes recognizes the iPod Touch/iPhone, let go of the Home button otherwise it will go into recovery mode and you will have to do the entire DFU process over again.
        6. You will know when you have put your iPod Touch/iPhone correctly into DFU mode when the display is blank and that you do not have anything on your device.
    Once you have done this click restore and iTunes sould start to dowbnload and install the latest firmware.
    #Please note this will reset your iDevice to factory settings
    Syther101

  • Does anyone have an example to share of using a variable in a proc call?

    I would like to use a value from a table to call a procedure in ActionScript. Can anyone share an example with me? TIA,
    Deb.
    (For example
      var proc_name_from_table:String;
       var command_proc:String;
      command_proc="mx.core.FlexGlobals.TopLevelApplication." + proc_name_from_table;
      command;
    Or something like that (just to give you an idea where I am heading).
    It is for a site map application that gets values from a table and I don't want to write a huge if statement with specific, hard-coded calls.)

    You have to use the Call Library Function Node to call Windows API functions. The animatewindow function itself has some pretty simple parameters. You first need to get the window handle. There are a set of Windows API Function Utilities (32-bit) for LabVIEW that you can use. In there there is a VI (Get Window Refnum) that gets the window handle. It's a simple call to a Windows API function. You would call the animatewindow function in the same way. In this case there are 3 parameters: the window handle (returned by a FindWindow API call), a DWORD (32-bit integer) for the duration, and another DWORD for the flags.

  • Does anyone have good flow techniques for UI using LCDUI?

    I've been writing J2ME applications for quite some time and I find that designing the ui flow can sometimes be a real headache so I was wondering if anyone had good ideas about controlling the flow when designing a UI using LCDUI.
    Thanks
    Ian

    I see that 288 other interested parties have viewed this posting, but I do not see a response.  I have a short program in basic that we created some years ago that I was about to convert to LabView.  We created the program for both flange taps and pipe taps.  If you were successful in creating a LabView version, I would love to share it.  If not, I will continue working on my version and post it here later.

Maybe you are looking for

  • Address book export - CSV file

    Hello people, Is there any way I can export my addresses as a CSV file so that I can import it into gmail's web client thingy? many thanks, J

  • Old laptop stolen, can't add music from new laptop to iPhone

    Basically, my old laptop was stolen out of my car, so bought a new one. I've put all my backed up music onto my new laptop, but can't add music from my new laptop to my iPhone. I've deauthorised my old laptop and authorised my new one, but iTunes won

  • Creating Editable PDF from Form Created in LiveCycle

    I believe the anwser is no, but I want to confirm. If I create a pdf form in LiveCycle Designer, can I load and populate that pdf form with a different library such as iText or do I have to use continue to use the LiveCycle PDF Services. (2.5) Thanks

  • Supportpack -  SRM 7.0 SP10

    Hi all,    We are currently in SRM 7.0 SP08, planning to apply SP10. Is there anyone who is already in SRM 7.0 SP10. Would like to know how stable it is compared to SP09. Did you face any major setbacks or issues while moving to SP10. Would appreciat

  • Copy & paste multiple key frames?

    Is there a way to copy and paste multiple key frames? Thanks.