Anyone have sucess to get S-Video out working on iSight iMac (20")

I used the Apple iMac-->Video Out adapter (composite and S) but no luck using S-Video cable (new Monster cable).
Have not tried composite yet.
As soon as I plug the adapter in the iMac's resolution resets and I have the additional display options in preferences.
If anyone has been successful to get video out going, what settings did you use for the TV Display in preferences?
TIA

Too bad one has to plug/unplug it to turn the TV on/off. Or am I missing something?
I tried the S-Video direct to the TV and it worked. Before I was trying it to input side of DVD recorder because it runs to an auto-switched input on the TV. Seems one just can't get all the eggs into one basket
Quality was good on my 50" Sony.

Similar Messages

  • I updated my 4s to ios7 and the phone is now completly dead. I tried to restore it with the new itunes but it won't restore. If you can't get the download be glad! Anyone have any ideas other than going out and buying a new Samsung phone?

    I updated my 4s to ios7 and the phone is now completly dead. I tried to restore it with the new itunes but it won't restore. If you can't get the download be glad! Anyone have any ideas other than going out and buying a new Samsung phone? I don't really need a paper weight.

    No not jailbroken. After the update which took about 45 minutes. The phone went black. Dead. Wouldn't restart. Using the new itunes I tried to restore it. It went through the motions; the white Apple and progress bar appeared on the iphone screen. Then I got a message "Itunes has detected an iphone in recovery mode. You must restore this iphone before it can be used with itunes." Then the phone went completly dead again. I Repeated the process and got the same results. Is there another way to restore the phone if it's dead, besides itunes?

  • How do you get the video out to TV to work on the iPhone 3GS

    I cannot get the video out to TV to work on my iPhone 3GS with iOS 5.1.1.
    I am using the $40.00 apple composite AV cables and nothing seems to work. With the cables connected to tv input nothing shows up in general settings for video out. Or anywhere else for that matter. I have tried many different TV's, sometimes I get audio but never never ever video . Does anyone else have this problem or better yet the answer?

    Thanks for responding to my question about not being able to get the video out to work on my iphone 3GS. In answer to your question i couldnt get any video to work at all. But, i do know what was wrong now. The whole problem was the brand new $40.00 set of apple composite AV cables i just bought was no good. This afternoon i took a trip to the nearest apple retail outlet (30 miles away) with phone and cables in hand. And after doing a little head scratching of their own they decided to try another set of cables, and low and behold the darn thing worked like a charm.I was very impressed by the service at the apple store even though i didnt buy either product from them. I wonder if there is a bad batch of cables floating around out there because it looks like other people out there are having the same problem, which is why i didnt really suspect the cables. Thanks again for responding.   Micdude001

  • How can i get HD video out from the lumia 900. ? ...

    How can i get HD video out from the lumia 900. ? Is there some kind of gable. ? N8 has HD cable port..so where is lumia`s port. ?

    Download Zune and start it, when started connect your Lumia 900 and you can now transfer mediafiles from the Lumia to your PC through a USB connection. For Mac use the Mac connector.
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • Does anyone have the Sony HDR-XR500V video camera??

    Does anyone have the Sony HDR-XR500V video camera??
    Is it compatible with a G5 PowerPC? Any pros? or cons? Please advice.

    I'd stay away from Sony unless you are buying pro stuff, but even then...
    Sony software is only compatible with windows & their mac support is pretty much non-existant.
    plus, hard drive camcorders are a terrible idea! if you start having problems, poof, there goes the hours of footage. Even the Sony cams that use flash cards are a bad choice - you usually have to buy their magic gate cards.
    I'd stick with Panasonic or Canon cameras that are SDHC+Internal or just SDHC. AT least this way the cards can be replaced, you can expand the memory, & it's SD - much cheaper to buy than the magic gate cards.
    check out camcorderinfo.com for more info & reviews.
    Now, to import your footage, you will need an app like Voltaic as importing AVCHD with Apple's video apps is only supported on Intel machines. You can still edit with iMovie or Final Cut - the versions that support HD, but the initial import from the camera will have to be done with the 3rd party utility.
    http://www.shedworx.com/voltaichd
    http://www.camcorderinfo.com/

  • I can't get my video toto work

    I can't get my video to work on my iPad.... I have never used it before so today I thought it would be nice to take a video... I did look it up on line but everyone is saying I have to slide the marked video to the middle of the screen, and I have done all that but it still won't work... Thank you

    Swipe up or down on the screen - anywhere on the screen - until the word Video appears in yellow type on the right. That indicates that the video mode has been selected. Then tap on the big red dot to start recording, tap the big red button when you are done recording.

  • Does any one have any luck getting screen sharing to work in Skype 2.x

    Does any one have any luck getting screen sharing to work in Skype 2.x?

    The current skype app works (makes calls) with iphone, ipod touch as well as the current ipad, per the description of the app. The ipad is obviously not going to be able to make video calls, but I know the iphone 4 can make video calls to a PC through skype. Works really well too. Im assuming that with the ipad 2 you should be able to make video calls as you can with iphone / ipod touch.

  • Does anyone have a Motorola T 501 speaker phone working with the I Phone 3G

    Does anyone have a Motorola T 501 speaker phone working with the I Phone 3 G in the car? If you do? Can you tell me how I can answer the calls from the T501, and not have to answer from the iphone, as right now it doesn't seem to be working correctly, unless I am doing something wrong?
    Thanks

    I have the Motorola T505 speakerphone which I too am using. And no, it doesn't work correctly either. It seems I have to answer the iphone first and then the call is transferred to the speakerphone. I do end the calls with the speakerphone but that's it. I also found that the Motorola no longer announces the incoming call and I've lost certain voice commands.

  • How do I get "Vanishing Point" to work properly on iMac Retina 5k

    How do I get "Vanishing Point" to work properly on iMac Retina 5k? When I "render grid to photoshop" the grid is not in right place and scale. I'm using latest version of CC.

    OMG! What a load of crap and thank you for posting this. I spent 3 solid hours to do something that I have done hundreds of times before, apply a Vanishing Point filter. I kept thinking I had some non-default setting on and was literally screaming at my new iMac. I NEVER thought it would be the cause. It was actually easier to reinstall CS5 on an older Mac and just do the stuff I needed. This is crazy. I fully get why Adobe doesn't support this yet but to not make a huge deal out of it so people know about it is just wrong. When I searched for Vanishing Point on the Forums, this thread showed almost the bottom of the first page. It should be stuck to the top until they fix it.

  • I have a new unlocked iphone3gs. I cannot get the video to work. When I try to record video I am not offered any options. It films until I tap the red button, but then everything just freezes. I

    I have a new (from Apple) unlocked iPhone3gs. I cannot get the video recorder to work. When I take video I am not offered any options at the start or the end of filming. The screen freezes when I hit the red stop button. But that's it. I have to hit the home button to get out of that. And none of the v-recordings can be found on my phone anywhere.
    Also I'm having trouble with Bluetooth. My Mac says it's paired with the phone, but the phone says not; even though It accepts the pairing code from the Mac. I'm getting very frustrated with these problems. I came on here to find the user manuel, but can only find the fingertip manuel and the product license manuel. Both of which I have in hard copy.
    And the most annoying thing is the sound on the calls. I can hardly hear the caller.
    Anyone got any helpful advice?
    Thanks, Elizabeth

    Robert or Elizabeth...
    Sync media using iTunes, not Bluetooth.
    When the screen freezes on the iPhone, try "resetting".
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    And this link is for the iPhone 3GS user guide >  http://manuals.info.apple.com/en_US/iPhone_iOS3.1_User_Guide.pdf
    Main iPhone Support >  Apple - Support - iPhone
    Serously doubt this is a "new" iPhone 3GS. More likely refurbished.

  • Working with HD m2ts files to get best video out burned on disk.

    Working with m2ts video files, how to get best video output.  I have Pinnacle 12U and the video picture that is produced on a burned disk is much better then what is produced in Adobe Premieme PRO CS4.  I would like to continue to use Premieme Pro, but unless I can archive at least the same quality of video it would be hard to make the switch.  I must be missing something???  HELP!!

    More input,  the media file output is VTS.VOB format from Adobe and from Pinnacle it is m2ts.  When you stop the playback m2ts is real sharp and the the VOB is not as clear.  During the playback the m2ts disk is so much better than the Adobe VOB format.
    Does anyone know if this is the best format that Adobe can produce?   It's a shame that with the great High Definition picture that you can now get out of a personal movie camera, that Adobe cannot produce the same quality picture out on disk!!

  • Adding a PCI graphics card to a G5 to get S-Video out - ???

    Hello!
    I have a G5 and a Radeon 9650...everything is fine except:
    I would like to have S-Video out to preview my video scenes on a preview monitor!
    Unfortunately the Readeon 9650 has no video out and because I'm using two display, the Apple DVI-to-Video adapter is not an option for me.
    Ok! What about sticking an old Radeon 7000/9200/9250 PCI in my G5, so I will get video out and I could even attache a third display to it:-) ???
    As usual, PC graphic cards are way cheaper as the Apple ones, so is it possible to use a PC card WITHOUT flashing it???
    (I mean, the system just uses my 9650 for normal operation and the PCI card will just be used after OSX is running)
    Has anybody any experience with using two graphic cards in there G5??? Are there any problems with OSX?
    Cheers
    Balrock

    Hi Edwin,
    thanks for your answer!
    I thought that I will have to flash the card, but that should not be so much of a problem.
    Will a flashed (or nativ Mac) card in the PCI slot work without any problems together with my AGP 9650?
    Or will it confuse OSX and slow down the G5?
    There is also the problem of flashing a Radeon 9250(they are quite cheap!). Only Club3D cards are flashable as far as I know, but they are only tested when beeing the main/only graphics card in the computer.
    So, is it possible that flashed cards, not able to handle the boot process/be the main card, will still work with video out after OSX is up and running?
    I won't let my camera run all the time as a Firewire/S-Video converter.
    Cheers
    Balrock

  • Video Out - working for anyone ?

    I have tried 3 different GS's with Apples composit video out cable and it does not work on my Sony HD TV. The same cable works fine with Ipods...
    Do we need a special 3Gs cable ?
    Anyone have luck?
    TIA.

    Well mine works with the standard Apple Composite cable..albeit for videos that I had converted for viewing.
    Played back OK on my Pioneer HDTV

  • Does anyone have any idea how to find out the version of weblogic plugin

    Does anyone have any idea about how to find out the current version of weblogic plugin used to connect from webserver to weblogic server?
    I could not find version in plugin directory.
    it's the same one that came prepackaged with Weblogic 9.2. we haven't change it.
    Sun One 6.1 SP6
    Weblogic 9.2
    Solaris 5.10
    Edited by: 985608 on 01-feb-2013 8:20
    Edited by: 985608 on 04-feb-2013 6:25
    Edited by: 985608 on 04-feb-2013 6:27

    Hi,
    You can find version of weblogic plugin using below command.
    strings <plugin module file> | grep -i wlsplugins
    Mark if this helps.
    Regards,
    Kishore

  • How do I get ym video to work with Lion? The video button is greyed out.

    I thought this was supposed to be an automatic thing but I can't seem to get the video portion of ym to work with ichat. Any suggestions are appreciated. I am using Lion.

    I kind of have the opposite problem. I need to know how to turn off my remote on the computer. I am using the remote for my Apple TV and it keeps making the volume on my Computer go up and down (with annoying sounds).
    There used to be a way to un-sync the remote with the comp but I cannot remember how and the Apple help is not much help! I have Lion.
    Thanks!
    Best,
    Tony

Maybe you are looking for