Anyone having good luck with a G5 Dual 2.5 PPC?
I've been a Mac user for quite a long time going back to my SE30 and I can say that only one time before have I ever had this much trouble; (The first version of OSX).
I have performed every version of the install and the end result is always the same. I'm having severe issues with the Finder crashing and restarting itself. None of the Apple apps work without constantly crashing and me restarting them several times. FYI, I did download the combo 10.5.2 update and apply it myself and I have repaired permissions all along the way. I've even installed each update one at a time just to see if my issues were related to any particular update and it wasn't. I have since gone back to Tiger and my machine runs GREAT! I would really like to upgrade to Leopard without having to purchase a new computer.
Apparently you didn't read my FAQ. RAM can go bad ANYTIME.
RAM errors can not be detected even given the age of the universe in testing time.
If they happen, then you know it is bad. It only takes one sequence of bad registers which you can't test for given the age of the universe to trip up RAM.
And it doesn't necessarily happen on every machine.
I'm really starting to believe that there is an issue with the Dual 2.5 G5/PPC and Leopard that hasn't been addressed yet.
If there were such issues, they would have appeared in testing the computer itself. Apple said all G5s and all G4s of 867 Mhz or faster are supported.
Issues that they can't address are third party issues, as those would also take longer than the age of the universe to test every combination of possible factors.
The fact you had this on an erase and install suggests something is wrong with the hardware of your machine that was undetectable under normal tests.
Only replacing the hardware of the machine (the RAM being the easiest to do since all of it is under lifetime warranty from most manufacturers, and you can get identical spec from numerous manufacturers) will you eliminate the potential problems you are seeing. And those problems you have witnessed are identical to those seen by people who have had issues with RAM.
Message was edited by: a brody
Message was edited by: a brody
Similar Messages
-
USB PRINT SERVER... Anyone had GOOD luck with one ???
I want to add a couple different USB printers, a scanner and ext drive to my home network. I want to find a good USB interface that will be hard wired to my router.
I've seen some units with 1, 2 & 4 USB ports. Some will handle all functions, others just printing.
Any ideas?Check out Linksys.
-
RAM: Has anyone else had good luck with Corsair?
First of all, thanks Bas and Scottg26 for pointing out the correct version of Memtest86+.
I know that Corsair has a crappy rep around this forum when it comes to the Athlon 64. However, I've had nothing but good luck so far (knock on wood). I've been up and running for almost a month now with no BSODs and the computer has booted every time so far. I'm using Corsair TwinX 1024 LL in slots 1 and 2 with the speed settings on Auto in the BIOS with a voltage of 2.6. I've run Prime95 for up to 10 hours or so with no errors and I just ran one pass of Memtest86+ v1.00 with no errors. It took 18:50 and showed the following settings:
Memory: 1024M 1447MB/S
Settings: RAM: 200Mhz(DDR 400) / CAS:2-3-2-6 / Single Channel (64 Bits)
However, I will point out that the only real world test it's really passed so far is playing Call of Duty.
Here's a link to the actual RAM on NewEgg: http://www.newegg.com/app/ViewProductDesc.asp?description=20-145-435&catalog=147&manufactory=BROWSE&depa=1
Is anyone else happy with their Corsair RAM so far or did I just get extremely lucky?Quote
Originally posted by amxandy
I read the horrible reviews for Corsair on this forum after placing my order for a stick of Corsair CMX512-3200C2PRO memory (I couldn't resist the activity lights). I have had no problems running at specified memory timings. I have always had good luck with Corsair and will continue to use them.
Yeah They are neat at that. Question is how well do they overclock?
I'm getting a 28Mhz fsb overclock out of these dimms that I have and They are used I admit, But like the seller said they are great overclockers! -
Anyone having a problem with iDVD in Mavericks 10.9.3? When previewing a slideshow all color is lost after the first image.
Is your problem with iMovie as the title suggests or with iDVD?
-
Is anyone having volume issues with the new Iphone 4S?
Is anyone having volume issues with the new Iphone 4S?
Yes, the volume on my iPhone 4s will max out without me touching any button or setting. When opening mail, for instance, the ringer icon will appear and the volume level goes to max volume - and I'm not touching the volume buttons. It seems to happen randomly, at least I can't identify a pattern, but thankfully it doesn't happen all the time, but at least once a day.
Anyone else seen this? -
Is anyone having Mic issues with iPhone 5?
Is anyone having Mic issues with iPhone 5? Speakerphone works but not the mic, on phone calls and memos.
Took it to local Genius campus and after taking off the back screen and case, they blew air into the mica and it worked for about 20 mins.
I can't have a ready can of air around every time the mic goes out.
Anyone else had similar issues?I am having a similar problem. I had the iPhone 5 delivered yesterday. On most of the calls I tried, the person on the other end could hear me just fine on speakerphone, but not on the regular mic. It was garbled, or I would cut in and out. I could always hear the other person clearly.
I just got back from a Genius Bar appointment where they gave me an entirely new phone. The issue exists on this one also, though now it seems like the audio is more muffled than garbled or spotty. Again, speakerphone works, and I can hear the other person clearly.
I had originally restored backup from my 3GS, but before I went to the Genius Bar I restored to factory settings just to be sure it wasn't a software issue (it wasn't, apparently). I did not restore from the old phone for this new handset either.
Thanks for any suggestions...frustrating, for sure! -
Is anyone having a problem with adobe being slow?
is anyone having a problem with adobe being slow?
Adobe pro XI; it takes 20 seconds to go to the next page or even longer to open.
-
Is anyone having a problem with iPhone 5 not backing up to iCloud. No problem at first now it says it will take 35 hrs, etc to back up.
Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
Has anyone having an issue with the iphone 6 signal cell strength on Verizon?
Is anyone having an issue with the iPhone 6 signal on Verizon?
I'm having the same issue as most of you on this forum. my current OS is 4.3.5 and after a factory reset, the camera started working fine, however, once i done the restore the camera reverted back to the same issue - "the shutter on the screen wont open, and the still/video switch just flashes" - what is more strange is, i have the HP home&biz app installed and this has a camera function and the camera seems to work fine with that, therefore suggesting there is nothing wrong with the hardware and this is a software issue. I'm currently awaiting a member of the Apple support team to call me about this, will keep you posted. BTW - someone suggested, going into Location Services and switching off the camera and apparantly, the issue was resolved for them, unfortunatly, this didn't work for me extremly odd issue indeed!
-
I'm having bad luck with motherboards from Newegg.
Hi all,
I have successfully built several systems from the ground up with motherboards from Microcenter. However, I'm having no luck with the 2 motherboards i got from Newegg.
The first one, ASUS P6T, would not reboot unless the reset button was pressed a few times. Then i ordered the GIGABYTE GA-EX58-UD5 X58. I had high hopes but it too came out of the box with a problem. It start/stops/starts/stops.... I discovered that if i remove the 8pin power connecter, the mb starts but still will not post. I removed and replaced all components including the PSU and still no joy.The original PSU i got two weeks ago for the new system is a PC Power & Cooling (PP&C )910 watt unit. I think thats plenty of power. The PSU tester diaplays the following:
+5V = 5.3
-12V = 12.2
+12V1 = 12.3
+12V2 = 12.3
+3.3V = 3.4
5VSB = 5.3
P.G. = 300ms
I plugged the PP&C 910w PSU as well as a completely different 400w PSU into the GA-EX58-UD5 with the following components removed - no drives, cards or case fans and all drive/audio/usb connectors disconnected - just the i7 920 CPU and ram - the mb acted in the same manner. Actually, its the PSU that's reacting to the motherboard i think. I can hear both PSU's "click" like its tripping a breaker then resetting - hence the mb starting and stopping.
Anyway, after i removed some and then all of the ram, the system started without stopping but still no post. I have also been getting a debug error code of 62. From what i understand, the error code indicates that the motherboard is not recognizing the ram.
It would appear that your both wrong in this case.
I searched the internet and found some posts where either the bios has to updated to accept ram i have or the ram has to be replaced with something the GA-EX58-UD5 likes. In one post, the current ram, Crucial DDR3 1066 (thats what i got), was replaced with Corsair XMS3 1333 ram and the system booted up.
I'll keep you updated. -
I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
Hi anyone having a problem with windows 7 and itunes
Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!
Yes, I am also having trouble with my windows 7n. I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.
-
Anyone having a problem with dull photos
I'm having a problem with dull photos on I Phone 5S. I believe it may be due to the case, Otterbox Defender. With case on photos are dulled out. Without case, no problem. I was surprised to see this issue isn't all over the web. Anyone else having this issue? What is a case that won't cause the problem?
had never heard about the case before I googled it
and it looks like a huge beast which could be the cause
the reason it's not all over the web could be that most people like me
never heard about the product or don't use it -
Anyone had any luck with trying to get a nano sim from the carriers yet?
These nano sims are a bit annoying seems like all the carriers in the UK, mine being Orange won't give me one till the 21st. That means I'll have my Iphone from Apple on the 21st but won't be able to use it as a phone because Orange refuse to give me a sim for it
Hi,
the BC 2.0 and the 2.1 update drivers are from late 2007, not Catalyst 8.8
Two possibilities for you:
Use this direct download link for the latest Mobility Catalyst Driver package (currently 8.8) http://ati.amd.com/online/mobilecatalyst/
Or use the Mobility Modder found here http://www.driverheaven.net/modtool.php with the Desktop Caralyst Package found on AMDs website.
Good Luck
Stefan -
Is anyone having any problems with the ML Xcode installation crashing your computer?
I have tried to install the new Xcode in the AppStore for ML and once it gets to the "installing" part, my computer completely crashes instantly. This is the error I was presented with when I got back into OS X:
Your computer was restarted because of a problem
Interval Since Last Panic Report: 1349 sec
Panics Since Last Report: 3
Anonymous UUID: D15D8585-7FF2-6F6E-F636-ADC39FD0D6BF
Thu Nov 8 15:55:34 2012
panic(cpu 7 caller 0xffffff8027b1ddfa): "fsevents: copy_out_kfse: asked to copy out an invalid event (kfse 0xffffff80df7f4380, refcount 0 fref ptr 0xdeadbeef)\n"@/SourceCache/xnu/xnu-2050.18.24/bsd/vfs/vfs_fsevents.c:1267
Backtrace (CPU 7), Frame : Return Address
0xffffff80defe3b10 : 0xffffff8027a1d626
0xffffff80defe3b80 : 0xffffff8027b1ddfa
0xffffff80defe3de0 : 0xffffff8027b1d493
0xffffff80defe3e60 : 0xffffff8027d76abe
0xffffff80defe3f00 : 0xffffff8027d768e2
0xffffff80defe3f60 : 0xffffff8027de1533
0xffffff80defe3fb0 : 0xffffff8027acea1d
BSD process name corresponding to current thread: SmartwareServerA
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000027800000
Kernel text base: 0xffffff8027a00000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 5695620123152
last loaded kext at 4171716596146: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7fa9e31000, size 229376)
last unloaded kext at 1454483445663: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7fa9e2e000, size 12288)
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 4.2.4
org.virtualbox.kext.VBoxNetFlt 4.2.4
org.virtualbox.kext.VBoxUSB 4.2.4
org.virtualbox.kext.VBoxDrv 4.2.4
com.logmein.hamachi 1.0
com.Cycling74.driver.Soundflower 1.5.2
com.apple.filesystems.smbfs 1.8
com.apple.filesystems.exfat 1.3
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.ntfs 3.10
com.apple.driver.AGPM 100.12.69
com.apple.filesystems.autofs 3.0
com.apple.driver.IOBluetoothSCOAudioDriver 4.0.9f33
com.apple.driver.IOBluetoothA2DPAudioDriver 4.0.9f33
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.1f2
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.AMDRadeonAccelerator 1.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleIntelHD3000Graphics 8.0.0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.AppleIntelSNBGraphicsFB 8.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMuxControl 3.2.11
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleIRController 320.15
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAcceleratorFamily 19.0.26
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.kext.AMD6000Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.1.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 6 GB, SMC 1.69f3
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353237334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS727550A9E362, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 6
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3
Anyone have an idea?I am having an issue with what appears to be the same thing, though I don't believe I have any of those apps you listed. Could you please provide me with assitance?
Wed Mar 6 22:32:40 2013
panic(cpu 1 caller 0xffffff802d2ac90b): Releasing non-exclusive RW lock without a reader refcount!
Backtrace (CPU 1), Frame : Return Address
0xffffff80ac893950 : 0xffffff802d21d626
0xffffff80ac8939c0 : 0xffffff802d2ac90b
0xffffff80ac8939e0 : 0xffffff802d31c09c
0xffffff80ac893c10 : 0xffffff802d310e92
0xffffff80ac893c40 : 0xffffff802d2ff375
0xffffff80ac893f50 : 0xffffff802d5e182a
0xffffff80ac893fb0 : 0xffffff802d2ced33
BSD process name corresponding to current thread: installd
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000002d000000
Kernel text base: 0xffffff802d200000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 7656038126330
last loaded kext at 456528520033: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7faedc7000, size 229376)
last unloaded kext at 202119881046: com.apple.driver.AppleUSBUHCI 5.2.5 (addr 0xffffff7fadb40000, size 65536)
loaded kexts:
com.apple.filesystems.smbfs 1.8
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleIntelHD3000Graphics 8.0.0
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelSNBGraphicsFB 8.0.0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleIRController 320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.1.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Maybe you are looking for
-
YouTube Issues: Pitch Black Video Screen! Am I the Only One?
Just recently I have experienced a complete inability to view videos on YouTube. Everything loads just fine on the page *except* the actual video to be watched. In its stead there's just a pitch black rectangle, but nothing else. I have tried finding
-
How to convert Bex Analyser report into normal MS Excel sheet
Hi, I created query in Bex Analyser. Now, I want to send this copy as a normal MS Excel document through mail. When I tried save as and send a copy, It is showing the filter,table, information buttons and appearing same as bex report. I would like t
-
How can u insert and retrieve text files in any format using forms6i.
how can u insert and retrieve text files in any format using forms6i. can u give me an example of an insert statement, let's assume the file is located in the a:drive. and retrieving the files, i would give the user a list of all the files that are i
-
Disk Error Midway through a Backup
I am about to upgrade to Windows Vista, before doing so I wanted to Backup my itunes Library. Everything was going fine with the backup until I hit disk 5 (out of 6). Prior to it being finished I encountered a disk error, itunes gave me the option of
-
Hi all I did a bdc for the tcode mira. It works fine in the foreground and displays a status message "INVOICE DOCUMENT 411523 POSTED" is raised by SAP itself. But in backgroud the program gets finished,but no documents is posted. I want to