Anyone having issues with your iphone4 shutting down while editing photos

Recently I have been cropping some photos on my iphone4, while in the midst of cropping the phone shuts off.  Everything is up to date on the phone and I am not sure what the cause of this is. Has anyone else had this issue and what have you done to resolve it?
Thanks

there were quite a few people that had the probably when trying to crop a screenshot, the solution hasn't been found. i haven't seen any threads on here of people having problems editing regular photos.

Similar Messages

  • Verizon iPhone 5, 64GB black - is anyone having issues with a very choppy conversation while talking on the phone.  Both my wife and I have the same phones and are both having the same issue.  We can only hear every other word.

    Verizon iPhone 5, 64GB black - is anyone having issues with a very choppy conversation while talking on the phone?  Both my wife and I have the same phones and are both having the same issue.  We can only hear every other word of the person we are talking to.  This happens at home, on the road and in the downtown area while calling both cellphones and landlines. It is intermittent, so we don't know exactly when it will reoccur.  Absolutely no problem with data.  The data speed is great.

    "Wireless devices use radio transmissions, so unfortunately you can't get Service if your device isn't in range of a transmission signal. And please be aware that even within your Coverage Area, many things can affect the availability and quality of your Service, including network capacity, your device, terrain, buildings, foliage and weather."
    Customer Agreement | Verizon Wireless
    While there may be an issue in your area, it is suggested that you don't use wireless service if it's a life or death situation, such as the one you've described.

  • Is anyone having issues with your iphone even finding wifi since the newest update? My phone will not even acknowledge a wifi exists anymore. I have tried all the recommended fixes thus far.

    I can no longer connect to wifi with the my phone. This is very troubling. I am planning on getting a new non-apple phone.

    Hi there jmichel216,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    -Griff W. 

  • Having trouble with music apps shutting down, even after I swipe them off the screen. They go off then come back on in a few minutes. This happens in my car either ubs plugged in, or bluetooth. ANy one else have that issue?

    Having trouble with music apps shutting down, even after I swipe them off the screen. They go off then come back on in a few minutes. This happens in my car either ubs plugged in, or bluetooth. ANy one else have that issue?

    Hi, beth.lau.gr.
    Thank you for visiting Apple Support Communities.  
    I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen.  I wont be able to give you an exact answer as to why this is happening.  However, this is the most relevant troubleshooting article for this issue.  This article also provides options to reach out to us via phone for additional assistance.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • Does anyone have issues with your battery in the iPhone 5 having to be recharged 2 to. 3 times daily?

    Does anyone have issues with your battery in the iPhone 5 having to be recharged 2 to. 3 times daily?

    Only concrete way is to use it less sorry see here every method possible has been tried
    https://discussions.apple.com/thread/4329696?start=2970&tstart=0

  • Is anyone having issues with Android version 4.3 for Galaxy III throwing in zeroes into text messages?

    I received a message on Christmas Eve that a free update was available for my Samsung Galaxy III.  I accepted the download and discovered some enhancements and fixes that I liked (finally, my voicemail icon displays the number of waiting voicemails that I have!) but I've noticed to glaring issues:
    1. When I send text messages that include numbers (a phone number for example) the OS throws in random zeroes into the number.  I have to usually touch the ENTER key and type the number on a new line and play around with it until the number stays in the message correctly.
    2. I've had occasional lockups using the media hub which, when I do a restart, causes my settings to revert to the default factory settings....kind of a pain.
    There may be other issues. 
    Q. Has anyone out there experienced this same thing?
    Q. Is Google going to fix these issues?  I noticed that on Christmas day a half dozen or so updates were made, but these to things still are a problem. 
    Q. Also, the Verizon Wireless Software Upgrade Assistant on my laptop insists that my version is not supported.  I can still access photos and music, but it's a little annoying...

        I'm sorry you're having issues with your phone after your update BigLouie1124. I recommend enabling safe mode to see if any of your apps are causing issues with your new software. If so, you can remove them. Here are the steps http://vz.to/1cD0kqT . If you continue to have issues the last step would be a factory reset to clear up some of your issues http://vz.to/JCsr33 . Please keep us posted and continue to clear unwanted message threads and clear your browser history periodically.
    KinquanaH_VZW
    Follow us on Twitter @vzwsupport

  • Anyone having issues with facetime fail on iphone 4 or macbook pro?

    Is anyone having issues with facetime fail on macbook pro or iphone4?

    Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page.
    http://www.apple.com/support/systemstatus/

  • Is anyone having issues with imessages disappearing or not being delivered?

    Is anyone having issues with imessages disappearing or not being delivered?

    I too am experiencing this on my iPhone 4 after upgrading to 4.3.3. I am fairly convinced that it is a software issue. The last update seems jumpy. There appear to be more pauses and stuttering with screen changes too.  Sometime the button operates perfectely (even with repeated light touches). Other times, it doesn't matter how hard I press; it takes several presses. I notice it more when i am using a battery case or connected to an AT&T MicroCell. I am having a hard time pinpointing problematic apps, although i suspect that mail with my work Exchange account may be a culprit. I suggest posting your issues on Apple's iPhone feedback page, www.apple.com/feedback/iPhone.html, to ensure that they are looking into this problem. If it is a hardware issue, I'll be pretty upset as I received my iPhone 4 on day 1 of availability and it is out of warranty. Hoping for a fix with an update. Please post on the feedback page.

  • Is anyone having issues with getting apps.

    Is anyone having issues with getting apps? It keeps taking me to my billing info for some unknown reason. it says (invalid address) when I try to purchase or update apps. Anyone got any answers to help me please??????

      YES I TO THOUGHT I HAD DONE SOMETHING TO MESS MINE UP, AND TRIED FOR 2 DAYS TO GET AHOLD OF SOMEONE TO SEE IF MY CC INFO HAD BEEN HIJACKED BUT WITH TODAY'S SO CALLED TECHNOLOGY YOU CAN NOT TALK TO A LIVE PERSON WHEN DEALING WITH ITUNES SO IT DOESN'T MATTER WHAT HAS HAPPENED YOU WON'T EVER REACH ANYTHING BUT YOUR OWN COMPUTER..LOL
    AFTER I FOUND THIS SITE I SEEN THAT NOT ONLY I AM HAVING THIS SAME PROBLEM, MANY , MANY MORE ARE SO I GUESS WHEN APPLE HAS DECIDED THEY HAVE LOST ENOUGH $$$$$ THEN THEY WILL FIX IT... GOOD LUCK TO YOU!!!!

  • Anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

    Urgent please
    anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

    Sounds like the folder Write permissions issue described here with a solution:
    "Some import operations were not performed" from camera import

  • HT4972 Is anyone having issues with facebook on iphone 3?

    Is anyone having issues with Facebook and iphone 3?

    If you're using IOS 4.2.1, you can not download facebook. I have had the same problems and now just use safari to go on facebook. Hope this helps

  • I'm working on my iMac PowerMac8,2 PowerPC G5 (3.1) 2 GHz machine and have been having problems with the computer shutting down unpredictably. After the problem becoming impossible to work with, I shut the machine down. Now a little better, but reoccuring

    I'm working with my iMac PPC G5, PowerMac8,2, 2 GHz machine running OS X 10.4.11, and was having a problem for a while with the machine shutting down unexpectedly. There was no clear pattern to when it was shutting down as far as I could tell. For a while, it would also not restart when buttoned on.
    I set the machine aside for a while, probably a month or more, and then got it back out after its rustication. It started up and runs significantly better than it had been, but I have noticed it shutting down sometimes now again, though not as frequently as before. Sometimes it runs for a good long time between active work, sleep mode, and active work again. Once in a while it does shut down when no one is working on it (while asleep). But now it always restarts when buttoned on.
    I've done the thorough vacuuming of any dust from the unit vents. I wonder if there's anything else I should try. In most other ways the machine works pretty well and has become the family desktop for basic uses, so I'd like to keep it running if I can. A little frustrating to not be able to upgrade all programs (iTunes) to useable versions, but that's another story....
    I would appreciate any ideas about the shut down problem.
    TCC

    Option 1
    Reset your PRAM.  Press and hold down the Command Option P R keys while starting your computer.  You will hear the startup chime.  continue holding down those keys until you hear the startup chime a second time.  Release the keys.  If the computer restarts, you will need to reset your Date and Time.  It might be time to replace your PRAM battery.  The G5 iMacs require a 3 volt CR2032 lithium watch/camera battery like below:
    http://eshop.macsales.com/item/NewerTech/CR2032/
    You can find these batteries at Walmart, Kmart, Target, most local drugstore chains, for between $3-$5, or at Radio Shack for $12-$20.
    If you have any G5 iMac model EXCEPT the iSight version, you can probably do the battery install yourself.  Watch this video on upgrading your iMac's RAM to show you how to remove the back of your iMac, if you don't already know how:
    http://eshop.macsales.com/installvideos/imac_g5_mem_m/
    While you have the back off, use a can of compressed air to blow the dust out the vents at the bottom of the iMac, the fans, and anywhere else you can.  Also inspect the 28-30 capacitors on the logic board.  Look for dark spots, if they look puffy or swollen, or leaks.
    Option 2
    Reset the SMC by removing all cables (USB, Firewire, Ethernet, Modem, Power cord) from the back of your computer.  Let it sit for one minute.  Press and hold the power on button on the back of the iMac while plugging in the power cord.  Release the power on button.  Count to five, the press the power on button again.
    Option 3
    Place your original, came with the iMac when purchased install disk, into the slot on the iMac, press and hold the C key while pressing the power on button on the back of the computer.  (If you have upgraded your OS from when you purchased your iMac, example your iMac came with OS 10.3 installed, and you're now using OS 10.5, then use the OS 10.5 Retail Install disk that you had used to upgrade your OS instead of the original, came with the iMac disk.) 
    Continue holding the C key until you see the OS starting to load.  DO NOT do an OS installation.  At the top Menu bar, select Utilities or Utility, and pull down to Disk Utility.  On the left side of the window that opens,select your normal OS drive.  Click First Aid at the top middle of the window if it isn't already selected.  Click Repair Disk from the lower right area of the window.  When that is done, click Repair Permissions to the left of the Repair Disk button you clicked earlier.
    When that is done, quit Disk Utility.  From the top Menu bar (I think its under Utilities) select the Start Up Manager, and choose your normal boot volume as the startup disk.  Restart the computer.  If successful, and you've rebooted from your normal startup disk, eject the install DVD/CD, and you're good to go.
    Good luck.

  • Is anyone having issues with icloud?

    I log in just fine but when I click on contact it gives me an error.  Anyone having issues?

    The inability to log into iCloud.com (sporadic problem), can’t use Contacts, Calendar, Notes, etc. (consistent problem), can’t send error reports (consistent problem) from a Windows PC seems to be a common problem.
    My recommendation is to download Apple’s Safari version 5.1.7 for Windows to access iCloud.com. It consistently works for me!!!! To make things easier with Safari, I made iCloud.com its Homepage. I’m using it to access iCloud.com from all of my PCs.
    On my Windows 7 systems it appears that some add-ons are causing problems when you try to access iCloud.com with the 32-bit version of IE9, but the 64-bit version seems to work fine, more than likely because there are few add-ons that are 64 bit and the 64-bit version can't be the default browser in IE9.

  • Anyone else having issues with white iphone4 home button?

    so i have come across this stuff here and there but i am pointing more towards people from India..
    You all know how Pathetic apple is at India because of not having major share holding...
    My White iPhone 4 purchased in july on the same date as launch in India has issues with the home button.. It sometimes becomes unresponsive.. Stays like that for 5-15 seconds as it varies and then starts working..
    I don't understand if it is hardware or software issue.. Sometimes for weeks it doesn't happen and then it could happen way too much... i went to the iStore guys and they told me to restore it as its a software issue..
    I wanted to know if any of you faced that and what did you do? did you get a replacement? since it happens occasionally i cant show the store guys that it is happening so they won't replace.

    My experience with home button:
    Mine did not work sometimes also; but I found this was due to "how" i was pressing the button. There must have been some dust under it because if you pressed it in a certain place; the button would press in but this would not register until you pressed really quite hard.
    Pressing in any other place and the click seemed to register.
    Try it and see if it is the same for you? Can you press your button in a place and it doesnt register (mine was at the top of the white square on the button)...
    I had mine replaced under warranty from my Apple Store.

  • Anyone having issues with InDesign (CS5) and Suitcase Fusion 3 (Mac)?

    I've run into a problem that I think might be caused by Suitcase Fusion 3 [Version 14.2.0 (319)], but I'm wondering if anyone here is having any issues with InDesign and Suitcase Fusion like I am?
    Just about every time I launch an InDesign document or an Illustrator document (don't seem to have the issue in Photoshop, strangely enough) it pretty much crashes to the point where it's a force quit. Before anyone asks the question, this is what I've done - I've reformatted my hard disk (even writing 0s!), done a clean install of Lion (10.7.3), clean install of Creative Suite 5 (and updates), clean install of Suitcase (and updates)...you get the idea. I'm still ending up with crashing just about every time I open a document in these two apps.
    As an experiment I downloaded a (fully functioning) trial version of FontAgent Pro (which I didn't like, btw) and didn't encounter any crashing at all in either application.
    I've opened a ticket with Adobe to see if they have any details as to whether this is a known conflict or whatever (though I don't hold much hope for getting help from them since it's looking more like a Suitcase issue than a Creative Suite one).
    Does anybody have any suggestions as to what I can do to try and resolve this?
    I'm in the middle of producing two magazines and I really really don't need this! Lol

    From the lovely people at Extensis tech support -
    Thanks for the info. As you said, if this is happening when you have only manually activated fonts, then the auto-activation isn't coming into play which does lead me to think it is related to the plug-in generally and maybe the sleep issue, which you say you definitely have. So I've added you to the sleep issue tracking.
    If you find yourself coming back from putting the computer to sleep and the apps with Suitcase plugins have hung, do this:
    1)      Go to your spotlight and type in "activity"
    2)      Launch "Activity Monitor"
    3)      Highlight the name of the adobe/quark application that is hanging by clicking it.
    4)      Click the "Sample Process" button at the top of the screen.
    5)      Click the "Save" button.
    6)      Click the "Save" button again and save the file to your desktop.
    7)      This will generate a file such as " Sample of Adobe Illustrator CS5.txt"
    8)      Repeat this process with any other application that is hanging.
    9)      Highlight the "FMCore" process by clicking it.
    10)  Click the "Sample Process" button at the top of the screen.
    11)  Click the "Save" button.
    12)  Click the "Save" button again and save the file to your desktop.
    13)  This will generate a file named " Sample of FMCore.txt"
    14)  Place these files along with the ".Plugins.txt" files created earlier into a new folder called "Plugins"
    15)  Right click (control+click) to compress into a .zip file.  
    Please attach this zip in reply to this mail.
    When we are sure of a fix, we'll get back to you. In the meantime here are some workarounds:
    Option 1:
    1)      Back up your font sets by dragging them to the desktop
    2)      Remove SF3 v14.2 by following the instructions here: 
    http://www.extensis.com/en/support/kb_article.jsp?articleNumber=4020
    3)      Download and re-install Suitcase Fusion 3 (version 14.0.6) from: 
    http://dl.extensis.com/downloads/ST/EN/M/SuitcaseFusion3-M-1406-EN.zip
    4)      Are there fonts and font sets in your old font vault you would like to recover?
    If NO :
    a)      Open SF3
    b)      Simply drag and drop your original fonts into the SF3 "Font Library". This will copy the fonts into a new font vault.
    If YES : Restore your old fontvault from the backup the removal tool created
    a)      If you choose "Y" to KEEP your font vault earlier when you ran the removal script, on your desktop you will find a folder called "Extensis-Backup-today's date" that contains a backup of your previous suitcase fusion 3 fontvault.
    b)      Move your old font vault from the "Extensis-Backup-today's date" folder on your desktop into this folder: 
    /Users/[your username]/Library/Extensis/Suitcase Fusion/Suitcase Fusion.fontvault
    c)       Launch SF3 from your dock. you should now see all your old fonts and font sets.
    Option 2:
    Remove our auto-activation plugins and activate your fonts manually in SF3 and/or add your adobe/quark apps to the SF3 > Preferences > General > Global Auto-Activation Options list. here's how:
    1)      In SF3: choose Suitcase Fusion 3 > Manage Plugins
    2)      Uncheck the boxes for adobe/quark apps; this will remove our auto-activation plugins
    3)      Choose SF3 > Preferences > General
    4)      Under "Global Auto-Activation Options", press the "+" button to add your adobe/quark apps
    Please note that "global auto-activation" is less accurate than our plugin-based auto-activation. Double check your font usage in your design app to confirm the correct font was loaded after opening a document.

Maybe you are looking for