Anyone having LTE connection issue after updating to 8.0.2.?
After updating my iPhone 5S to 8.0.2, I can no longer connect my phone to LTE but my iPhone 6 plus is fine. Anyone having the same issue?
Loner T wrote:
From Loss of cellular service or ability to use Touch ID after updating to iOS 8.0.1 on iPhone 6 or iPhone 6 Plus
The Health app won't work in iOS 8 after these steps. It will be fixed in our upcoming iOS 8.0.2 software update.
Last Modified: Sep 25, 2014
There is no IOS 8.0.2 out yet. There is no patch for iPhone5s.
This update is specific for iPhone6/6+ as indicated
Download the file below that corresponds to your device:
iPhone 6
iPhone 6 Plus
8.0.2 is out. But if it's true that 8.0.2 is only for iPhone 6 or iPhone 6 Plus, WHY would it appear on devices that aren't 6 or 6 plus? I have two 6 phones and the update went fine. But the update also appeared on our iPad's, which I downloaded and that went fine as well.
Similar Messages
-
Anyone having album art issues after update to iOS 6 ?
Mine's a strange one . It occurs in the player bar at the top , with the scobbler and repeat/shuffle controller . The album art is now missing when I play anything , but only up there . Every album art is where it should be on the main page and you can still "full screen" it , so to speak . It gets stranger still . With home sharing on and the iPad now accessing that library , it operates and displays as it normally would ... just with the songs stored on the iPad does this minor error/glitch happen . Any thoughts on this one ?
I do know this . Thre's no way I'm deleting or replacing all my music on this iPad 2 . It's 64 gig , and most of the space used is music , so it's a massive , tall order to do all that again .It'll take time , but deleting and then re-sycning every piece of music on the iPad is the only solution . No one at Apple had heard of the issue and thus had no answers , but when adding a new album and replacing some lo-res album art , the issue presented it's own solution .
-
Bluetooth connection issues after update
Is anyone experiencing bluetooth connection issues after upgrading to iOS 8.1.3? I upgraded to iOS 8.1.3 and now it won't connect to my car bluetooth and my bluetooth speaker will sound like it has static from time to time.
Hi, joshzik.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing issues with various Bluetooth devices and your iPhone. Sometimes pairing the devices again can resolve the issue. However, here are a couple articles that have some helpful troubleshooting steps regarding Bluetooth connectivity and an iOS device.
Get help using your iPhone, iPad, or iPod touch with your car stereo
http://support.apple.com/en-us/HT203412
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
-Jason H. -
Logic Remote connectivity issues after updating to iOS 8 (solved!)
Has anyone else has been experiencing connectivity issues with Logic Remote after updating to iOS 8?
After updating to iOS 8 I could no longer connect so I sent a feedback report to Apple and got a response that cleared up my problem immediately:
Navigate to the following directory on your desktop system running GarageBand:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
You can quickly navigate there using the “Go” menu in Finder -> Go To Folder (shift-command-G), then copy this path:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
In the Preferences folder should be a file named "com.apple.garageband10.cs”.
Make sure GarageBand is not running and delete the "com.apple.garageband10.cs” file.
Relaunch GarageBand and see if you should now be able to connect.
The same can be done for Logic by navigating to:
~/Library/Preferences/
And deleting "com.apple.logic.pro.cs" and restarting Logic.
Note that doing this will fix Logic Remote connectivity issues (and possibly other problems with latency and mixer functionality) but will also delete any other Controller settings that you've configured with Logic, if you happen to be using another controller of some sort.Thanks very much! This solved my connection problem.
-
Bluetooth connectivity issues after updating to OS X 10.10.3
I have been experiencing issues with bluetooth mouse connectivity (apple magic mouse) after updating OS X to 10.10.3. My Macbook Retina 15" pro (early 2013) keeps losing connection with the mouse. Switching the mouse on/off helps in re- establishing connection between the mouse and the laptop for a few seconds. I was under the impression that this update of Yosemite was intended to rectify bluetooth and wifi connectivity issues. Any suggestions/advice welcome.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.Bluetooth.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Is anyone having Web Sharing issues after switching from 10.6 to Mountain Lion?
I want to upgrade to Mountain Lion from Snow Leopard (10.6.8) but I wanted to see if anyone is experiencing any issues with their Web Sharing after making the switch. I use Web Sharing daily to build and test web sites for my clients and when I made the switch to 10.6 none of my database driven sites worked. Ultimately I had to install a new version of PHP 5 because 10.6 came with and older version. And I had to reinstall SQL for my databases along with some other related items. It wasn't a major problem but it took a couple of days to track down the issue. Anyone seen any weirdness like that with Mountain Lion?
Web sharing is absent in Mountain Lion. Apple removed the feature. There're some unofficial hacks to bring it back, search the forums.
-
Is anyone having their phone blackout after update?
When i end a call, I can't even hit end call or anything.. the screen jst goes black, i hate to press the home screen a few times until it lights up
Or i'll be using the phone for something else and the screen will go black and again I have to keep pressing the home screen till it lights up again.
anyone having that issue? any suggestions on what to do ?
Thank youYes same problems. Some playlists just crash the music app competely. I had to turn off the match for music app on my iphone as well
-
Wifi connection issues after update
I recently was prompted to update my S4 and after it has been completed, I have issues with the phone recognizing and connecting to known routers that I use every day. I have the Wifi on all of the time and the two main routers that I connect to are at work and at home. If I leave my house, and go to work, my phone shows that it recognizes my work router, but does not automatically connect to it. The same scenario happens when I walk into my house; the phone recognizes the router, but won't automatically connect to it like it used to do. The only way that I have found that my phone will connect to both of these places is if I toggle the "wifi on/off" switch. Does anyone know how to make my phone automatically recognize and connect to known routers again?
And verizon is absolutely correct. Verizon provides cellular and data services and coverage for a monthly price.
Samsung is the maker of the devices and the operating system is done by Samsung/Google and then submitted to Verizon to eventually push out to their customers. Verizon is not responsible for a bad operating system update, Samsung is.
Like Apple devices, I personally applaud Apple for doing their own updates without Verizon it makes it easier to push out patches or fixes much quicker.
All phone manufacturers should be doing this so to have the carrier not get blamed for something beyond their control.
You wifi patch will come from Samsung.
Car analogy is not even valid in you Ford issue. The driver is responsible since they are the driver of the car.
Verizon is the car, Samsung is the motor that makes it run. Car won't run without a motor.
Good Luck -
Is anyone having WiFi connectivity issues with 6.02
Is anyone else having problems with connectivity to WiFi hotspots since upgrading to 6.02. I have an iPhone 5, and ever since I upgraded, I can't connect to public hotspots without first restarting the phone. An example would be AT&T WiFi at Starbucks. All I get is an endlessly spinning gear icon unitl I restart my phone. I'm currently traveling and staying in a Sheraton with free public WiFi in the lobby, and once again, I can't get the logon page to display without restarting the phone. While the problem seems most prevelant with sites that require the opening of a web page to accept terms, it happened to me today at someones house where the only way I could successfully connect to their wireless was to restart. Until I did, the gear icon just kept spinning. Once I restarted I was able to connect successfully. This is becoming a major PITA!
I sure hope that engineering gets this corrected in 6.1. I expect more of Apple than to say they've upgraded iOS to fix WiFi issues, only to make them worse.I have this same issue. I'm hoping there is another update in the works. I finally got the issue resolved when my new Iphone 6+ continued to crash so now I'm dealing with internet issues. Phone resets are not helping!
-
Clicking, right-clicking, and selecting is very awkward after the latest update, and many times requires more than one try. At first I thought it was just my mouse that was having issues, but then I realized it only happens in Firefox.
It may be that your hard drive is either failing again or that the hard drive bay SATA cable may need replacing. And if you're getting a "Service Battery" anyway it's probably best to take the machine into your local Apple Store or an AASP and get a free diagnosis and estimate for repair. I would specifically ask that the SATA cable be tested so that you can tick that off the list of culprits.
Good luck,
Clinton -
Safari, App Store Issues after updating to 10.7.2
I have been running my imac that came preinstalled with Lion
I am having this wierd issue after updating to 10.7.2 recently
When i run Safari, App Store, Itunes, i can see its loading..
but after 2 hours its still loading.
It just seems to be stuck and its not the Beach ball.. So i dont think it hanged
Its not a network issue as well, since i am typing this on Firefox, which is running perfectly
What could be the reason?I'm having the same issue on my iMac. I've also noticed the rear of the left side is getting a lot hotter than normal.
I downloaded (from: http://support.apple.com/kb/DL1459) the update again and reinstalled it. But nothing's changed. Is there anything else I can try?
Scott -
Anyone having the same issue? Can this be fixed? I'm on a 2011 Macbook Air 11" running OS 10.9.2
Here is something to try. Boot into the Recovery HD by holding
down Command+R when booting. Select the get help online option.
It initially opens Safari with a local web page, but you can use
the bookmarks on the bookmark bar or even enter a website.
Many extensions may not be available but it could tell you if
it is your Lion install that is a problem or perhaps a hardware
problem.
If you can browse around in this mode, then it could eliminate
any possible hardware issues. If you still have problems, then
the issue could possibly be hardware/driver related.
Give it a shot and see what happens. -
Has anyone had WiFi connectivity issues at home with their iPhone 5 after accepting the recent IOS 8.0.2 update?
Yes, despite being it an iPhone5 (8.0.2) attempting to connect to an Airport Express.
In my case the iPhone "connects" to Airport Express 2nd generation, but no Internet packages are available; Airport Utility shows the Airport Express as not connected to the Internet; but the iMac, MBP, Motorola phone, Samsung Smart TV and HP printer connect without any trouble.
The actual issue is the DHCP :
sometimes the iPhone gets none, and
when an address is assigned it just doesn't work,
even renewing the address won't work all the times,
switching off and on the WiFi won't work all the times neither,
going on Airplane mode, then back won't work all the times.
Solutions attempted and failed:
Reseting and reconfiguring Airport Express;
Reseting iPhone;
Switching off and on the iPhone;
Setup the DHCP renewal for every 5 days;
Meditation and stark visualisation;
Other possible patch not yet attempted : setting fixed IP addresses
All suggestions received resemble Windows' "Plug & Pray"
I gave up after reading several notes around the WWW complaining about it.
Last credible suggestion : wait for 8.0.3 or 8.1, whichever fixes the issue first. -
Anyone having Bluetooth syncing issues w VW Tiquan11... and iPhone4? Essentially the pairing craps out every other time when you connect to the cars bluetooth. Requires rebooting iPhone, power off/on and then connects..
Many people are finding their Iphone 4S drops connection with their VW (Passat etc) integrated bluetooth hands free system after working fine for 5, 10, 20 minutes. The only way to reconnect is to switch the car off or turn the Iphone bluetooth off & back on.
This is a dangerous fault and it appears that both Apple & VW have no solution (or are ignoring as they have already sold you a phone & a car).
iPhone 4S, iOS 5.1.1, VW bluetooth -
Is there a fix for the wifi connectivity issue after ios6 update?
Is there a fix for the wifi connectivity issue after ios6 update?
Cannot connect to any wifi since update to 6.0.1
How do I get update to 6.0.2?
Will that even help?Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Maybe you are looking for
-
How to find out changes to standard objects
Hi, Is there any way to find out which all standard objects have been modified, either via a table or FM or any other way? Have tried SE95 but it also gives objects changed during last upgrade. Any help would be appreciated. Thanks in advance. Peter
-
Can I password protect access to Time Machine??
Hey guys .. Ive just switched over from PC to mac. So far Im loving it and doubt Ill ever use a PC again. I do have a question about Time Machine though. Is there a way to password protect access to the Time Machine interface ? Cheers Darren
-
Multi-Lingual Forte Applications
We have at least one application site that needs to have their applications in multiple languages. If any of you out there have experience in doing this and can offer tips/techniques it is appreciated. Also, have any of you evaluated Lindhard Forte S
-
How to findout rows which are not null ?
Hi friends, Can anyone tell me how to find out the no of rows which is having full data in each column (not null) ? Ex:- TEST_TABLE having 1000 columns and lakes of rows. myQuestion:- I need to find the no of rows which are filled with 1000 columns f
-
HI all, I got some questions about connect DTR by SSL. Firstly, can DTR command line too connect DTR by SSL? I tried but got following errors: ==================================================== >Connecting to client "DTR_HTTPS" Ping on server https