Anyone having printer problems with adobe cs5 and mountain lion

I can print one copy in adobe cs5 but if I hit the print button it shuts down the program.  Anyone having this problem besides me?

Are the drivers for your printer are up to date? You probably can print one copy cause it doesn't access the option window in your application.

Similar Messages

  • Is anyone having a problem with adobe being slow?

    is anyone having a problem with adobe being slow?

    Adobe pro XI; it takes 20 seconds to go to the next page or even longer to open.

  • Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

    After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
    Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
    Problem:
    - New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions. 
    - When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi. 
    - The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install). 
    Solution:
    1) Install Canon Printer Drivers and Software (from official Canon site)
    Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
    Canon 860 Series Drivers & Software  for OSX 10.8 Mountain Lion:
    The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
    1 Printer Driver
    (Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
    2 Scanner Driver
    (Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
    3 Network Tool
    (Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
    Canon Software for using advanced printing and scanning functions (while connected to network)
    4 Solution Menu
    (Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
    5 MP Navigator EX
    (Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
    6 Easy-PhotoPrint EX
    (Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
    Canon Support (HK) – check your local site
    http://www.canon.com.hk/en/download/main/index.do
    Select Product and drivers from support site eg http://support-hk.canon-asia.com/
    1. Choose a product category
    Multifunctional Printers
    2. Choose a product series
      Pixma
    3. Choose a product model
      Pixma MX868
    4. Choose type of document
    Downloads or FAQ
    If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
    2) Check Canon Printer and Software Working while connected via USB
    Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB.  Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’).  This is normally done as part of the automatic install but worth double checking
    3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
    After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
    Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
    DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list).  The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
    You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
    If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List.  It should say WLAN Active, identify the SSID and have an IP address
    If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

    Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

  • Hi anyone having a problem with windows 7 and itunes

    Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!

    Yes, I am also having trouble with my windows 7n.  I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.

  • Printing problems with Adobe CS5

    Hello all, I recently replaced the printers in one of our university Art Dept labs; they are using iMacs running Mac OS X 10.6.8 with Adobe CS5. They had three Ricoh CL4000DN color laser printers. They bought 3 Ricoh C320DN color laser printers to replace them.
    Now, pictures that previously printed fine on the old printers look bad (color and black both incorrect) when printed with Photoshop and other CS5 programs on the new printers - especially when compared with the onscreen picture and the same picture printed with the old printer.
    However, to make things even more interesting, these pictures print fine using the Preview program that came with the computers.
    I've experimented with different color profiles, printer settings, updated the Adobe programs - so far with no success.
    Temporarily, they are printing the needed pictures, etc. with the Preview program until we can find what's causing this issue. They are about ready to have me re-install the old printers.
    I've already contacted Ricoh and their response was, well since it's printing okay via the preview program, not our problem...
    Any ideas on what to check, change, upgrade next?
    Thanks
    Anthony Bailey

    I would contact Ricoh, the suppliers of the printers, and query about the drivers, making sure that you are using the latest PostScript drivers for this printer.
    I did lookup this printer on Ricoh's website. Apparently unlike your older printers that used Adobe PostScript 3, these low-cost C320DN printers do not use Adobe PostScript 3, but rather a third party “emulation of PostScript 3.” That could be your problem – a poor PostScript implementation in the printer.
              - Dov

  • Hanging problem with Adobe CS6 in Mountain Lion

    I recently upgraded my retina Macbook pro to Mountain Lion and was having some trouble with Adobe CS6 apps hanging on startup among other things (including iCal crashing on startup)
    I did a clean install of Mountain Lion and Manually rebuilt my applications folder so that Adobe MAster COllection was installed freshly on a clean install of ML.
    Now it is still sporadically hanging when I try to open Photoshop, Bridge or other Adobe apps. The only thing that seems to fix it is a restart which is inconvenient when you're in the middle of work.
    ANy ideas?

    Thanks for this. I had heard of the fonts problem some people have had. All my fonts were freshly installed by either the system or Adobe when I installed Master Collection. Following your advice, I just verified every font and the only problem that showed up (as you had predicted) was a minor duplication which I corrected. So, it seems unlikely to be the fonts.
    As for your other point, I have been using Final Cut Pro X and that has worked fine. The only other app that has given me trouble has been Calendar which seems to get strangely stuck sometimes while it is updating. Makes me wonder if there's something going on with the network I'm using. 
    One thing I hadn't thought of was that it could be a problem with gfx card switcher. This seems unlikely but I'll try disabling it and see if that helps.
    Weirdly, today when I had this issue, Photoshop loaded up ok but then hung when I tried to load any file into it. Bridge wouldn't start at all. I didn't try the others. Yesterday I was having problems with Illustrator.
    Anyway, I see what you mean about it not being a widespread problem - which is why I started this thread. It seems no one else is having any issues. If anyone else knows what I should look for in my configuration please let me know.

  • Print size problems with Epson R3000 and Mountain Lion

    I am using Mountain Lion on a 2008 MBP and an Epson R3000 printer.  I can not get prints to size to my paper.  In aperture I am choosing custom since there is no option for 11.7X16.5.  I have set the print size to the same and still it does not work.  I tried both landscape and portrait but that did not work. 

    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
    http://www.officeformac.com/productforums

  • Mouse problems with Illustrator CS6 and Mountain Lion

    The mouse in Illustrator selects and deselects as it moves over buttons and cells:
    1. In Graph data the cells the mouse passes over go dark grey if not already selected, then deselect if they are selected. This makes it very difficult to use the data cells.
    2. In Layers window, where I may have 100s of layers, I want to hide one layer or more which are not necessarily adjacent to each other. Illustrator hides all of the layers it passes. It is very difficult to click and unclick the show/hide button (and also the lock button). Ditto with show or unlock toggle layer. I had to start up in Lion in which Illustrator does not have this problem in order to get a job finished in time.
    Seems there needs to be a fix for Illustrator to work properly in Mountain Lion.
    Has anyone found such a fix?

    No I don't have Right-Zoom (don't know what it is), but I have the same problem with Apple's Track Pad, which I don't use much and I only use the inbuilt software.
    I use Kensington Slim Blade and before that LogiTech's marble mouse and both need their software to work properly.
    All of them work fine in Lion and earlier. Could it be that Adobe has overlooked some new aspect that’s in Mountain Lion which, in my case, needs to be fixed for Illustrator?

  • Driver Problems with CanoScan 9000F and Mountain Lion?

    I have recently taken delivery of a MacBookPro with Mountain Lion. I used Migration Assistant from an older MacBook and all seems to have gone well except for my CanoScan 9000F. This refused to load the MP Navigation software, even though I downloaded the latest drivers. I am a heavy user of the Scanner as I move towards a Paperless Office .
    Does anyone have experience of this combination of Scanner and Lap Top? Thank you.

    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
    http://www.officeformac.com/productforums

  • Anyone having RAM issues with Notes.app on Mountain Lion?

    I have installed ML a couple different times. All is well except for Notes. Once Notes is running and after it has synced therough iCloud there is a process that continues to run named "com.apple.NotesMigratorService" and it gobbles up RAM until there is no space left on the drive. The last time I watched in Activit Monitor and killed it but within a few minutes it would start up again. Currently, after running Notes, killing the process twice then quitting Notes, and now some 20 minutes later, I have ...
    183,217 Page Ins
    4,380,504 Page Outs
    Last time all the drive got eaten I had ...
    687,422 Page Ins
    15,363,792 Page Outs
    MacBook Pro (early 2011)
    2.2 GHz i7
    8 GB RAM
    256 GB SSD

    This issue is a big problem on my Mac, I can only imagine that it's affecting many more people than the few who've posted in this forum. 'timothylance' has indicated that Apple has contacted him and they're running diagnostics/addressing the issue. I certainly hope so.
    This problem is affecting my early 2009/dual quad-core Mac Pro. I had two notes on my iPhone before I installed Mountain Lion. The notes were sync'd to my Mac, two MacBook Pros, and my iPad. I installed ML on my two MacBook Pros, and didn't notice any problems.
    When I finally installed ML on my Mac Pro, I noticed a lot of hard drive activity. Applications were locking up left and right (I was running out of RAM). Eventually I had to kill a bunch of applications, and the hard drive activity was still high. I restarted the computer and had the same problems. Eventually, a window pops up stating that you've run out of 'disk space'. I checked the Activity monitor and saw that the 'com.apple.NotesMigratorService' had eaten up all my available Real (RAM) and Virtual Memory (Hard disk space availabe to use as Virtual RAM/swap space).
    You can use the 'Activity Monitor' application to locate and Force Kill (quiting doesn't seem to work/help) the 'com.apple.NotesMigratorService'. This should immediately frees up the Real and Virtual memory being eaten up by this process. A Force Kill also stops the process from restarting, until you launch/restart one of the applications which triggers the activation of this 'com.apple.NotesMigratorService' process.
    So far (in my experience), it seems that the following actions trigger the activation of the 'com.apple.NotesMigratorService'
    - Launching the Notes application.
    - Launching the System Preferences application and accessing the iCloud preference. (Note: My Notes preference in the iCloud pane is checked/synched, but I can't get Mail checked/synched via iCloud. This may be unrelated/a different problem.)
    - Launching the System Preferences application and accessing the Mail, Contacts & Calendars preference.
    (FYI - In Safari 6.0 the bulleted list view doesn't display properly. The paragraph above was drafted/originally posted as a bulleted list, but appears without any indentation or list bullets when viewed in Safari 6.0. I edited it to add hyphens and hard breaks to simulate a list view.)
    Hopefully Apple will patch this soon. I find it extremely annoying that I have to continuously monitor my 'Activity Monitor' to watch for this process. If I find additional triggers for the process, I'll reply to my entry here.
    - R. Vaessen
    Message was edited by: Robert Vaessen

  • Print problem with InDesign CS5 and Power RIP-X

    When I try to print an InDesign page using PowerRIP I get a big X across the page that is not in the document. Any ideas as to why and how I can fix this?

    The demo version PowerRIP adds the X watermark.

  • Any problems with Adobe CS5.5 and the Maverick system?

    Has anyone had any problems with Adobe CS5.5 and the new Maverick OS? I don't want to install if there are issues. Thanks!

    First thing I would suggest is to upgrade your server OS to a newer version if possible. Secondly try removing the apps out of the allowable apps list and instead change it so that you allow the apps that are within the specific application folder, ex: Applications/Adobe Photoshop CS5
    I had similar problems with CS5 apps and by adding the apps by allowable folder instead it corrected my problem. Granted, if you have savvy users, there is the potential to open a can of worms here but it was the only way I could get it to work for "standard" non-admin user types.

  • Hi,  So I'm having a problem with Adobe Acrobat 10

    Hi,
    So I'm having a problem with Adobe Acrobat 10. I have backed up adobe acrobat files and stored them on an external hard drive. When I attach the external hard drive to one laptop I can open the acrobat files just fine but when I try to open the files from the other laptop I get "Acrobat could not open "file.pdf" because it is either not a supported file type or because the file has been damaged (for example. it was sent as an email attachment and wasn't correctly decoded). To create an Adobe PDF document, go to the source application. Then print the document to Adobe PDF.
    Both computers are Toshiba Portege laptops and both computers have Adobe Acrobat 10 Pro installed. I can open files fine from one but can not open the exact same files on the other. I find this very strange. Also, I can plug the external drive into my iMac and open the files fine from there and other different Windows computers. It appears the issue is just happening on the one laptop. Any ideas for a fix? Thanks.

    For the specific laptop - consider doing a "repair" (under Acrobat's Help).
    If that does not do it then consider uninstall-deactivate-reinstall-active.
    Still no go? Try:
    Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
    Be well...

  • Has anyone else encountered problems with Adobe CMM clobbering Photoshop add-in filters?

    I recently tried to install Adobe CMM, as a pop-up window suggested after I installed Photoshop CS5 on a new computer, running Win7x64 Ultimate. Before trying to install CMM, my Akvis Sketch Plug-In for Photoshop worked fine. Afterwards, Akvis Sketch runs under the filters menu, but will not accept mouse clicks from my Wacom tablet. Prior to Adobe CMM, all was fine. Somehow, the frustrating attempt to use Adobe CMM broke links to Akvis Sketch.
    By the way, Adobe CMM setup tried to run and vanished without a trace - no indication of success or failure. CMM doesn't show on my control panel as installed software, so I can't de-install it.
    I did un-install Akvis Sketch and re-install it. No luck as a filter, nor as a stand-alone program.
    Additional point of interest - a second identical software/hardware workstation continues to run Akvis Sketch just fine because we didn't try installing Adobe CMM on that machine. It certainly looks like CMM is the culprit here.
    Since Akvis Sketch is broken as a stand-alone, I doubt that de-activating, uninstalling and then re-installing, re-activating Photoshop CS5 will help, but it will take a lot of time to recreate actions and re-install other add-ins, plus preferences settings.
    Has anyone else encountered problems with Adobe CMM clobbering Photoshop add-in filters, and have you found a work-around?

    Thanks for your response. Recent evidence points to Wacom's tablet driver, not the plug-in.
    Fact #1 - another identical system with ms mouse worked fine so I swapped out the Wacom tablet and bingo, the Akvis plug-in works again.
    Fact #2 - So does Amazon's Kindle for PC app, which also quit working after running the Adobe CMM setup I'd downloaded.
    Suggestion - since there's a legacy for CS5 users getting the "you should download CMM" pop-up, yet no need to do this, maybe Adobe should remove the CMM download page from its website - or flag this download as unneccessary for photoshop users. All Best, Charles Pierce.
    Message was edited by: PECourtejoie Please do not autoquote messages, it makes threads difficult to follow.

  • Default printer problems with adobe 10.1.2

    I was having problems printing PDFs since upgrading to 10.1.2.  After reading and trying many recommendations, I happened to notice that my default printer(I have only one printer) was listed twice on the print window.  The first (default) printer is spelled "HP PSC 2350 series" (upper case 'PSC')  The second is "HP psc 2350 series" (lower case 'psc') .  The printer is named 'HP psc 2350 series' in my printers and devices, and if I select this printer, the page will print perfectly.  Now that I have solved my printing issue,  I would like to change the default setting on the adobe print window to come up as the active link, so I don't have to continue to select a different printer everytime I wish to print a document.  The printer by the lower case "psc" name is set as the default printer in printers and devices, and I cannot figure out why it doesn't come up as the default printer on the adobe reader print window.  I also cannot figure out how to change the default in the print window.   An added interesting fact is that I get no response in the print window when I try to select "preferences' or 'advanced' for the upper case 'PSC' printer.
    My computer runs in Windows 7 (64-bit).  The printer is HP psc 2355xi all-in-one.  Any suggestions are much appreciated

    I have not been able to select a different default printer for Adobe,  but I can print if I manually select the correct link everytime.
    Date: Tue, 6 Mar 2012 13:16:52 -0700
    From: [email protected]
    To: [email protected]
    Subject: default printer problems with adobe 10.1.2
        Re: default printer problems with adobe 10.1.2
        created by AMG13 in Adobe Reader - View the full discussion
    I am having the same issue.The correct printer is selected as the default printer on the control panel and there is no driver with the lowercase convention.However, the first printer option that appears is the lowercase convention. Is there any way to select a default printer for specifically for Adobe, as opossed to the PC itself?
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4248912#4248912
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4248912#4248912. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Reader by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for

  • Cancel message is not shown in the page

    Hi All, This is my code for cancel in controller: if ( "Cancel".equals(pageContext.getParameter(EVENT_PARAM)) ) { am.invokeMethod("Cancel"); MessageToken[] token = {}; OAException confirmMessage = new OAException("MTH", "MTH_SETUP_CANCEL", token, OAE

  • Looking for a good app for viewing Wifi access point info

    Does anyone know of an app which will show me all of the access points within reach - even if they all have the same name - and will display signal strength as well as other data? I work in a place where I have to test the APs and verify that each on

  • Apple id not working in app store, works fine here and in itunes

    on my imac running 10.6.8 I can get into itunes, but not into app store. When I go to PURCHASES, or UPDATES i get prompted to log in (I have masked my ID in the screen grab) My ID works fine here, this is the ID I registered my iMac with.  Oddly, whe

  • Advertise Bonjour for a daemon using launchd plist

    Gents, How do I use launchd.. plist to make bonjour available for my daemon? Its hard to find what is possible en what I need to setup in the plist. This sounds vague for me. Sockets <dictionary of dictionaries... OR dictionary of array of dictionari

  • Original iphone used for itunes and now wont sync bc of no sim

    HELP PLEASE.  I had been using this iphone for itunes and decided to get all the pics off so did a restore.  Now it won't let me do anything to it because there is no SIM card in it before.  I could always hook it up and sync before but this time I d