Anyone having problem after installing whatever xp's updated itself?

Hi all,
Everything was working fine after I've installed XP(recently bought-boxed-ps2). But then after working on it for 15mins, I restarted XP because of new updates XP had downloaded from microsoft. Now my eject button doesnt work.
I can still eject via win explorer but it's not like being able to eject at a push of a button
Any sugestion?
Thank you all.
Artrek

http://www.olofsson.info
this will remap your keyboard...
enter on bottom becomes right click
display adjust works
eject works
ctl alt delete works
it is great
i have installed the same XP as you.. updated it an am running with the above driver
good luck

Similar Messages

  • Is anyone having problems with the stock widget not updating?

    Is anyone having problems with the stock widget not updating?

    Widgets unfortunately have gone by the wayside since Apple introduced the App Store a couple years ago.  No widget has received any official recognition in the Apple listing of Widgets since that time.  So it is entirely possible the widget has gotten redirected.   There are many other Apps for stocks.  I personally like the Nasdaq Quote website since it knows mutual funds and other markets as well.

  • Is everyone having problems after installing 10.4.9?

    I just switched to a MAC several months ago after having Windows based machines for 20 years. Made the switch just to avoid the same problems I had with Windows, problems with software updates. I installed 10.4.9 last night and all of the sudden AOL stopped working. I used the Activity monitor to help me unfreeeze the AOL uploading and it appears to work now. Now my Mail no longer works. Also Safari has begun to continually crash. Had to restart numerous times to get to forum to paste this. Help! Is this a common problem with Apples, should we avoid doing software updates?
    24inch IMac Intel   Mac OS X (10.4.9)  

    Is everyone having problems? Certainly not. I manage over forty systems, all of them upgraded to 10.4.9, and not one of them is having a problem. So your problem is by no means universal, at least.
    The first thing to do is to boot your system from the 10.4 install disk, run Disk Utility, and have it verify the disk and the permissions and repair if necessary.
    If no problems are shown by Disk Utility, you might try downloading the Combo update, if you can, and applying that. Sometimes the incremental upgrader can exascerbate problems with corrupted files; in such cases, the Combo updater sometimes fixes the problem.
    Failing that, reinstalling 10.4 (use the Archive and Install option) and then performing the upgrade might fix the problem. Again, sometimes an update can magnify or bring up a pre-existing problem, or sometimes and update just goes wrong.

  • How do i pause quick time recording ? having problem after installing maverick

    i have been having issue with quick time recording . after installing this Maverick i and no longer able to pause the Recording.
    nothing happens when i press the option key.
    done any one know the fix
    Thanks

    Ski Farm,
    I hope you are doing well today! The suggestion provided by altenbach is really good. Alternatively, you can also use a global variable and an event or case structure, to pause the execution of a VI. I have attached an example of a subVI, called by the mainVI, which displays the current iterative count of a while loop. Please let us know if you have any other questions. Have a great day!
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies
    Attachments:
    subVI_false.JPG ‏14 KB
    mainVI.JPG ‏26 KB
    subVI_true.JPG ‏15 KB

  • Problems after installing 10.5.2 update

    Any one else getting error messages via Disk Utility of various types after installing latest update. Going from a clean install with a clean bill of health, to bad directory messages after installing update 10.5.2.
    Input/ output errors, etc
    ACL errors- I've never seen this until installing 10.5.2.
    I also get corrupted directory errors that disk utility is unable to repair disk.
    imac G5 takes at about 5 Minutes to start up and for desktop to become active.
    I wonder if these are common experiences with Non-intel Leopard 10.5.2 users, or are these issues common to everyone that installed the update?

    here was little space on my startupdrive so I suspect that this caused the problem.
    That's a big time problem. You may have to connect another Mac to your laptop and boot your laptop into FireWire mode to clear out about 10 GB of space on it and then run the 10.5.2 Combo updater from the other Mac. That's one of the problems with having Software Update being automatic. I never use it.
    OT

  • Problem after installing 6.0.2 update

    Hello,
    I have installed Design Standard CS4 on MacOS. The serial number was accepted and everything worked fine.
    After installing InDesign 6.0.2 update, InDesign works in demo version because it does not accept serial number. Other applications works fine.
    What can be the problem?
    Regards.

    I also have this same issue with my Mac. I even uninstalled the entire Design Premium CS4 and everything in Indesign CS4 works fine.  AS soon as I load the 6.0.2, it just messed the licensing for some reasons.
    I haven't got my Mac on me yet but I am thinking that it may have something to do with the cache.db file where most licensing issue occurs.  If you like, try navigating to the location below:
    Macintosh HD > Library > Application Support > Adobe > Adobe PCD > Cache
    Inside the cache folder, move the cache.db file out of this folder.  Launch Indesign and you will be getting the License Agreement.  Accept it and see if you will be allowed to enter your serial number again.

  • Anyone having problems re-installing itunes 9.3 after uninstalling 10.1 version

    I have Windows XP Vista 32, and had problem with Applesyncnotifier not found error msg. The message suggested I uninstall the itunes version I had (10.1) and re-install, which I attempted to do. However, since I have Windows Vista Win32 bit, the 10.1 is not compatible and causes another error msg to pop up. So, I uninstalled 10 and re-installed itunes 9 on my PC. Now, I cannot open my itunes library and get the following error message. HELP!!
    "The file itunes Library.itl" cannot be read because it was created in a newer version of itunes"
    Please if anyone know how to get my Library to open, let me know.
    Thank you.

    DSK2691 wrote:
    I have Windows Vista Win32 bit, the 10.1 is not compatible
    That's a load of bull excrement.
    Instead of trying to use an old version of iTunes, install the current version from http://apple.com/itunes/download.

  • Anyone have problems after installing Boris FX into FCE???

    Hi Folks,
    I fear I've made a big boo-boo. The other day I downloaded and installed a program called Boris FX ("Boris FX Continuum", I believe was the full name). It was supposed to merely give me more options for video effects and transitions. However, FCE hasn't been working exactly right since. I get error messages on start-up, and now my external monitor has gone all jittery. (And, I'm in the middle of a project for a client!) Anyways, just wondering if anyone has had this kind of problem and can offer advice. I guess the simple solution is to uninstall the Boris component from my computer??? Is there a simple way to uninstall???
    Thank you all very much! I do appreciate any advice you can give.
    Vixter

    I'd recommend contacting the support folks at Boris: http://www.borisfx.com/support/form.php
    -DH

  • Privilege problem after installing 10.4.7 update

    I started experiencing
    1. not able to print to network printer from any applications - get error
    2. Not able to mount fileshare disk on MacBook located on my local network - wheel just spins forever and need to stop process.
    3. Adobe Illustrator and Photoshop silently quit
    After fooling with my system I got no where until I reinstalled the printer drivers for my HP 1320n ... I was then able to print sort of from some applications ... but to get the driver download to install I needed first to setup the root account - could not install it from my privileged admin account - got error saying I did not have enough privilege... it installed great from the root account.
    In fact I discovered that when logged in as root all the 3 problems above whent away?
    I can find no indication as to what went wrong or what I need to fix... any ideas would be most welcome!! I did a disk repair of file protections using the apple disk utility and that did not help.
    p.s.
    I long for the bad old days when my mac was not as secure as fort knox but very usable ... seems I spend too much time over privilege and security problems of which I do not care because my Mac is only used by me in my home..

    Hi
    I had very similar, if not greater problems since 10.4.7. Yes, repair permissions etc, but I have huntch that it you try to verify your start up disk you will get a message saying there are a couple of issues that Disk Utility cannot repaier and that the "task failed on exit" or words to that effect.
    If this is the case you need to repair the disk via "fsck" - as explained by Apple here: http://docs.info.apple.com/article.html?artnum=106214 which says:
    "Start up your computer in single-user mode to reach the command line.
    Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
    At the command-line prompt, type /sbin/fsck -fy
    Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
    ** The volume (nameofvolume) appears to be OK
    If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
    *** FILE SYSTEM WAS MODIFIED ***
    Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
    When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
    Your computer should start up normally and allow you to log in."
    I did this and it solved a lot of the issues and made everything a lot more stable.
    Hope that helps.
    Rob

  • Is anyone having problems with OS 10.5.7 update?

    I have a Tascam US-122 (older unit), and all was fine until the OS 10.5.7 update. Now, I get a signal from my US-122 going in that I can see on the system prefs panel, but no sound coming out of my monitors. ALL other audio devices DO come out of the monitors just fine.
    I have looked at every setting possible, and nothing.

    Yes, the US-122 is a usb interface. I have been using it for several years now.
    I have had no problems until this last OS update, which also included an iTunes update that I have heard folks are having burning problems with.
    I can SEE the signal going in (in the sys prefs meters), as well as in LE's meters, but no sound comes out of my monitors. Yet I CAN play songs in iTunes and pre-recorded tracks in LE7 and GB, without problems at all, as well as any other audio from online sources and from the OS, like alerts, etc. It is only audio straight from the US-122 that does not make a sound.
    I find it so odd that the OS Sys prefs show a signal, yet no sound is present, while all other apps produce sound as usual.
    I have repaired permissions, and have reset SOUND and AUDIO/MIDI setting severals times.
    I USED to be able to play guitar through my Vox ToneLab, connected directly to the US-122 into the Mac, whether I was using LE7 or GB or neither. Now I get NOTHING from it at all (aside from the OS meters), no matter what.
    I'd suspect a cable if not for the signal in the meters, and the sound from every other audio app, including pre-recorded LE7 & GB stuff.
    I have had minor problems in the past, but never anything like this.

  • Problem after installing 10.4.8 update

    I downloaded the new football manager demo. But I can't play it on my mac.
    I get this message when trying "array out of bounds" and the game ends
    I am a new Mac-user and have no idea what to do to solve this problem

    After installing the 10.4.8 updates recommended I am experiencing a slower response in Photoshop CS2 and Aperture.
    For Instance when using an erasure brush in Photoshop it seems to have to "think" about it for awhile before completing the task. In Aperture, the magnifying glass feature does not move smoothly but rather jerky and intermittent.
    MACPRO   Mac OS X (10.4.8)   2 x 2,66 Ghz Dual-Core Intel Xeon; 3GB 667 MHz DDR2 FB-Dimm; 250GB Mac Hard drive

  • Problems after installing 10.4.6 update

    Ever since updating to 10.4.6 I am unable to receive graphics. I've tried via Safari and Internet Explorer. My e-mail is affected as well as not being able to view other websites. Can I simply remove the 10.4.6 update or how can I troubleshoot the update? Thanks for any help.
    PowerBook   Mac OS X (10.4.6)  

    Thanks very much!
    PowerBook   Mac OS X (10.4.6)  

  • HT4623 After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source.  Anyone else having this problem, please advise on how to fix.

    After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source.  Anyone else having this problem, please advise on how to fix.

    IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • Anyone having problems getting CD covers to print after downloading latest software?

    Anyone having problems getting CD covers to print after downloading latest software?

    Lacking any responses to my initial post above, I will briefly update how I resolved this issue today.
    Installed new external hard disc, 1 TB WD My Passport for Mac, and straightforward setup involving first installing current OS X operating system, then system migrator utility to rebuild the same setup as saved in latest Time Machine backup. The whole process was somewhat time consuming due to my internet connection speed and USB data transfer speeds but it went without any issues. The computer now boots up and operates identical in all respects to how it did before the problem occurred.
    Regarding the internal HD of my iMac, if I now run Disc Utility to verify the disc, it reports "appears to be OK". However, viewing the disc usage in "About This Mac" window, it displays as entirely empty. Opening it in the finder also shows only a "Apple Hot News.mbox" file and a single .jpeg image, and .nothing else.
    Interestingly, the Bootcamp partition of my iMac's internal HD continues to work fine and appears unaffected by the problem. I use bootcamp rarely but still will plan to set up a replacement bootcamp volume on the new hard disc soon, in order to take its place.
    That the problem surfaced coincident with the software update may have been nothing more than bad luck? At this point I have no reason to suspect that the softward update had anything to do with the difficulties.

  • Anyone having problems installing 8.1.1 on iPad2?

    Anyone having problems installing 8.1.1 on iPad 2?
    file downloaded fine but keep getting error message that installation cannot be completed.

    I first went through the nightmare of updating to version 8.1, which took a couple of hours. I am still not sure how I did it. But recently with update 8.1.1, I had to do a factory reset and then reinitialize the iPad and then restore over 300 apps from the cloud. It was a royal pain, just like the update to version 8.1 but even more extreme this time with a factory default.
    Unless Apple gets its act together I am gravitating towards a non-Apple tablet. I have already done so with my iPhone moving to an Android, which after the learning curve, I love.
    The best advice I can give to anyone is to do a complete backup to the cloud before attempting an update. Apple seems not to be able to get its act together anymore.

Maybe you are looking for

  • Finder is not showing my USB connected devices

    I put in USB drive and it doesn't show up in the Finer or my desktop so that I can open it.  Then when I pull it out of the port a message pops up saying I didn't exject the drive properly.

  • Problème NI9234

    Bonjour Je suis doctorant à Grenoble, j'utilise des cartes d'acquisition pour acquérir des signaux de pression acoustique (16 exactement). Mes cartes sont des modules NI 9234 qui comportent 4 voies chacun je les utilises sur un châssis compact DAQ NI

  • Import RAW and jpeg

    If I try to import both RAW and JPEG from the same folder or from the same card LR only imports the RAW files. I usually shoot RAW and JPEG simutaneously so they both have the same filename but different file types. Photshop handles this OK so whats

  • How to mount an AP1142n above a suspended ceiling?

    Hello, Interested to find out what:   1) LWAP adapter   2) Mounting hardware/bracket(s) were used for any LWAP 1142n deployments above a suspended ceiling.  Our installation will not work with the included t-rail mounting hardware and are looking for

  • Fix for Bass Redirection issue in sig

    Hi everybody, I have just ordered a Teufel Concept E 5. Speaker System. For that reason I'm now also dealing with the purchse of a 5. sound card. At first my favourite was the Audigy 2 ZS, but now I'm hesitating because I've read on several forums th