Anyone having problem with the iCloud lately

anyone having problems with iCloud sending from iPad to windows computer within the last week?

I am having similar problems.  iCloud has been working great between my Mac and iPad, but within the last week, when I save a Pages doc (via my Mac) onto iCloud, it doesn't show up for me to retrieve on my iPad.  All my settings seem to be correct, and there are still plenty of other docs on iCloud that I have previously saved, but these new ones will not show up.  I have plenty of space left, so that is not the issue...

Similar Messages

  • Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    This is a major problem with Lollipop, but yo said it started 2 months ago.   Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again.   You might want to clear your cache before reloading.  Not sure this is your problem, but worth a try.  Good Luck

  • Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

    Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

    I have had the same problem but I seem to be getting somewhere to fixing it!!! My battery was going down at 20% an an hour now its 10% with constant use and 5 in standby !!! So improvement all round
    First I did a restore then I drained the battery i started to charge it and when it came on I turned the phone off completely and let it charge to 100% I then left it for a couple of hours on charge at 100. I saw no improvement after 1st drain so I repeated the drain battery and charge steps again with the phone turned off when charging and have seen a very big improvement. I am going to do it again tonight and hopefully problem solved!!!!
    The next issue is iMessage as that's playing up and wifi drop out
    Good luck

  • Is anyone having problems with the facebook app - just shuts down before it even loads - frustrating!

    Is anyone having problems with the facebook app - just shuts down before it even loads - frustrating!

    Hi Robk573,
    Thanks for visiting Apple Support Communities.
    I'd suggest the steps in our iPad troubleshooting assistant:
    https://www.apple.com/support/ipad/assistant/application/
    Best,
    Jeremy

  • Is anyone having problems with the program MacKeeper not runing a full scan in Mavericks?

    Is anyone having problems with the program MacKeeper not runing a full scan in Mavericks?

    Do not install MacKeeper (and how to uninstall it if you have):
    https://discussions.apple.com/docs/DOC-6221
    by Klaus1
    (Please note that references to the original developers, Zeobit, also now refer to Kromtech Alliance Corp, who acquired MacKeeper and PCKeeper from ZeoBit LLC in early 2013.
    And Here  >  Beware MacKeeper
    In General 3rd Party AV Software is Not Required as Mac OS X tends to look after itself.
    Read Here  > https://discussions.apple.com/thread/4545776?tstart=0
    See Here  >  Antivirus Discussion

  • Is anyone having problems with the stock widget not updating?

    Is anyone having problems with the stock widget not updating?

    Widgets unfortunately have gone by the wayside since Apple introduced the App Store a couple years ago.  No widget has received any official recognition in the Apple listing of Widgets since that time.  So it is entirely possible the widget has gotten redirected.   There are many other Apps for stocks.  I personally like the Nasdaq Quote website since it knows mutual funds and other markets as well.

  • HT1766 anyone having problems with the start button

    Is anyone having problems with the Iphone 4 start button not working

    What is the start button?
    Do you mean the on/off button, or the Home button?
    If either one is not working at all, more than likely there is a hardware problem.

  • Is anyone having problems with the latest version of iTunes?

    is anyone having problems with the latest version of ITunes?

    Dwayne3333 wrote:
    is anyone having problems with the latest version of ITunes?
    What a vague and useless question.
    A search of the forums would have revealed issues that others are having.
    Why does it matter though?  Are you having issues?  If not.. why would you care?

  • I anyone having problems with the Sleep/Wake Button?? it doesn't do anything

    I anyone having problems with the Sleep/Wake Button??
    It doesn't do anything

    if you press it and it does nothing, it may be broken. did you drop it?
    try pressing and holding the top power button and round home button on the front for 6-8 seconds and you should see an apple appear.. if you do see the apple, the power button worked.

  • Anyone having problems with the Abc app no loading since it has been added?

    Anyone having problems with the Abc app no loading since it has been added?

    Hi Popalotofstyle,
    Thanks for using Apple Support Communities.  It may be worth trying a restart of your Apple TV to see if that allows the ABC app to load:
    Apple TV: How to restart your Apple TV
    http://support.apple.com/kb/ht3180
    Cheers,
    - Ari

  • Anyone having problems with the on/off switch

    anyone having problems with the on/off switch. It sometimes does not work, I occasionally have to pull the plug out and replug then hit the button and it goes on?

    Out of the 100+ millions of iPhone, I'm sure there are many people that have that same problem.  If you do, you have a 1 year warranty... take it in before it runs out.

  • Is anyone having problems with the new Xerox printer driver update from Apple? My 8700S is no longer working with QuarkXPress.

    I allowed a System Update that included a Xerox Printer update. I am running a MacPro 10.6.8 with Quark 8.5.1 and a Xerox ColorQube 8700S.  EVERY was working perfectly before the "update" but afterwards anything sent to the printer from Quark would stall the printer.  I went to the Xerox website and downloaded their Printer Driver and tried again.  Now I could print from  Quark but I can NOT get to the printer window to change the type of paper, etc.  So, the problem still persists.
    Should I try going into Time Machine and trying to find the Xerox Print Driver in the Library folder?
    Should I upgrade the whole system software?  (I wouldn't mind doing that AFTER I get this magazine off to the commerical printer)
    Should I upgrade to Quark 9?
    Any help here would be apprciated.
    Thanks  - Rob

    As a general rule of thumb, I never install updates until I read its info and I am having problems with my current software.  I hide the updates until I need them.  Usually this happens when I update or upgrade my os.  I don't fix what ain't broken is my golden rule.
    It is possible that you need to update or upgrade Quark in order for your newer printer driver to work.  First I would try the following....
    Disconnect all peripherals from your computer.
    Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
    If your printer does not work afterwards, update or upgrade Quark.  If that does not work, contact the printer manufacturer.

  • Is Anyone Having Problems with the newer version of Firefox?

    I still have my older Mac OsXv10.4 Tiger software. I wasn't exactly happy with Safari browser as it would block many sites and were considered incompatible so I downloaded the free Firefox browser (the 2.0 version) of which I STILL have. I'm aware that there is a much newer version and would like to download that, but I've heard a lot of people saying they have been having severe problems with it, but then they have PCs and not Macs.
    So my question is for you Mac users that use Firefox, have you had major problems with the newer version? I'm real hesitant to download if I'm going to have the same problem PC users are having...like constantly crashing. Also would my old Tiger software be compatible? I don't want to upgrade to Leopard.

    Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.

  • Is anyone having problems with the Health App and Withings?

    After upgrading to ios 8.1 I am still having a problem getting my Withings Health Mate data to correctly update my Healt Dashboard. The information that does show up on the different Dashboard widgets is way off. For example, I today walked 2400 steps according to Withings, but the Health Dashboard shows 10,700 steps (720,000 in smaller print on another line). It further shows my daily average at 313,000 steps! Ridiculous.
    Walking/Running distance for the days shows 22.5 miles with a daily average of 108 miles.....I'm not Barry Allen/The Flash.

    My problems with the Healt App are all over the map. The information on Withings Health Mate is totally accurate, and updates immediately.  I have their scale (since 2011) and wireless blood pressure monitor. Also, I find the heart rate senson on the iPhone 6 to work well, every time.
    This issue for me is with Apple's Health app. I get ridiculous readings on the Dashboards. For example, it shows my daily average in steps as 170,688, and miles walked at 80. Hardly! Additionally, the Dashbord widgets will disappear/reappear for no reason. I have tried switching the priority of data sources for the steps dashboard between Withings and my iPhone 6 (because it is indicated that the top source governs the dashboard info), to no avail.
    Lastly, I don't know how to interpret the infomration on the individual dashboards. On the same line as the word "Steps" there is a number, i.e. 14,272 steps, and just under it the word "Today." However, when I switch from "Day," "Week,," "Month," and "Year," those number don't change. Below the word Today is a number (which changes all the time), and at the bottom of the widget, just above the month (October now) is the number 1,149,749. Nice.
    I would like to get the Apple Watch next year, but if the Health App cannot be fixed I may not.

  • Anyone having problem with the new ios4.1??

    i'm having problem with my iphone 4!!!!!!!!
    cant call or text sometimes so i have to rebbot or turn airplane mode on and off!!!!

    It's not necessary to post the same thing multiple times.
    Have you called your carrier to see if there is a problem in your area? Have you done any of the troubleshooting in the manual? Have you tried a new SIM?

Maybe you are looking for

  • RemoveAtt by column in Tabular Form

    Hi guys. This is my problem: I have a tabular with "select list" fields. I disable this fields on Load Page if pk is not null, so user can't modify value of this fields. But when I insert new row in tabular form i have an error from MRU (because sele

  • While burning a disc using CD-R, medium error during burn

    Using blank CD-R to burn photos from a named file, the burn stops and an erroe message occurs "Medium write error"???

  • How to disable A-GPS on lumia 720

    If anyone knows how to disable A-GPS in lumia 720 cause it disturbs my build in GPS since some days?

  • Tranfering programs from old mac

    I am soon getting a new Mac Pro at work. Upgrading from a 7 year old G4. I currently run Photoshop 7.0 on the old one as well as many other programs. Can I just tranfer the programs form the old mac to the new? Or do they all have to be installed on

  • Need Help with the Remote App

    I am able to get this to work on my iMac at home but I was trying to help my dad get his remote App working and have not had any luck. Well, slight luck but only for about 1 minute. His computer is hard wired into the wifi router, ipod touch is wifi