Anyone having problems tethering there camera and aperture 3 after upgrading to OS Lion?

After installing OSX Lion I have not been able to capture via tether with my Canon 5d and Aperture 3. I can see the camera and tranfer images but I am not able to tether.

Hi, I guess everyone is having a little bit different tethering issues. Mine was I couldn't get my files transferred into library. I would able to connect the camera, and even fire the shutter from computer, but nothing transferred through. I would just see a message says proccessing, then nothing, and shot counter stays at 0.
Later on I found the solution for THAT problem. Turned out Aperture was taking pictures, but they stored all my photos in a root folder inside the library, and I was not able to see any previews in the aperture interface, which totally defeated the purpose of tethering. The work around for me after many trail and error was, I had to leave the "Version Name" block to Master File Name when I start a new tethering session. I can not use Custom rename feature, or nothing would get transferred...
Hope this was your problem, and that's the way to solve it. I know some other people having disc permission issue and USB related issue...

Similar Messages

Anyone having problems getting CD covers to print after downloading latest software?

Anyone having problems getting CD covers to print after downloading latest software?

Lacking any responses to my initial post above, I will briefly update how I resolved this issue today.
Installed new external hard disc, 1 TB WD My Passport for Mac, and straightforward setup involving first installing current OS X operating system, then system migrator utility to rebuild the same setup as saved in latest Time Machine backup. The whole process was somewhat time consuming due to my internet connection speed and USB data transfer speeds but it went without any issues. The computer now boots up and operates identical in all respects to how it did before the problem occurred.
Regarding the internal HD of my iMac, if I now run Disc Utility to verify the disc, it reports "appears to be OK". However, viewing the disc usage in "About This Mac" window, it displays as entirely empty. Opening it in the finder also shows only a "Apple Hot News.mbox" file and a single .jpeg image, and .nothing else.
Interestingly, the Bootcamp partition of my iMac's internal HD continues to work fine and appears unaffected by the problem. I use bootcamp rarely but still will plan to set up a replacement bootcamp volume on the new hard disc soon, in order to take its place.
That the problem surfaced coincident with the software update may have been nothing more than bad luck? At this point I have no reason to suspect that the softward update had anything to do with the difficulties.

Are you having problems with the Lacie external drive after upgrading to the new operating system

Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

See here for everyone discussing the issue you are having:
https://discussions.apple.com/thread/5475136?tstart=0

Is anyone experiencing problems signing into imessage and FaceTime since upgrading iOS 6?

Since upgrading to iOS 6, is there anyone who have had problems signing into iMessage and face time? I need some assistance!

I think I've fixed it !!
not sure if this will work for everone but I noticed when you go on settings>messages>Send & Receive it was displaying my Apple ID twice and underneath where is says "You can be reached by iMessage at:" , it was displaying my email address twice as well, so I clicked on my Apple ID and signed out, restarted my ipod and signed back into iMessage in the settings and it just displayed my apple ID and email once. Next I restarted my router and my Ipod Touch 4g IOS 6 and it was working again !!! . Not sure if this will work for everyone but I just ****** around with it and it seems to be working for now anyway

Problem with scanning in Photoshop CS6 after upgrading to Mountain Lion

After upgrading to latest version of Mountain Lion i've got a problem with scanning directly into Photoshop CS6.
on the previous Lion version when I wanted to scan something, i just opened Photoshop -> File -> Import -> images from device
then a new window opened up the ImageCapture app where I could choose the device I wanted to use, and then I selected the scanner (Canon CanoScan 8400F) and I could scan directly into photoshop.
Now with Mountain Lion when I do the exact same thing, it opens a window, but it's impossible to select any device, as the new window is just a plain white window, with 2 buttons on top to rotate something that isn't there. (text is in dutch, cause I'm from the Netherlands)
hope someone can help me out.
I can scan with the use of the ImageCapture app without problems and then save that picture and open it in Photoshop, but it has worked before, so am I doing something wrong? or is this just a little bug
thnx in advance for the help

I’m having the same problem with my Epson Perfection 3200 Photo scanner and Adobe Photoshop CS6. It does the initial overview scan then I get the same blank window as BigNoud shows above. I've done a Software Update and have also updated OSX to 10.8.1.
I know for the Epson you can get a Mountain Lion compatible scan software from SilverFast for about $35.00 as an upgrade here.
I haven't gone that route yet as I don't want to give up any more money for my Apple/Adobe experience.
Any help would be appreciated.

Anyone having problems with there iphone 5 battery life been very poor

I have had the iphone 5 for 4 weeks now and the battery life is very very poor at first i thought it must just be how it is....was dissapointed tho from fully charged to flat in 4 hours with little use or going to bed and waking up with the battery life going down 17%!!! but then 1 day i charged it fully and it never went down for ages, over 24 hours and it still had 25% this lasted for about 4 days then all of a sudden back to been rubish, i sent it in to apple who returened it without doing a single thing (apart from scratched an dented the bottom!!) it was exactly the same ..poor.....but then last night i charged it took it off charge at 6pm (english time) and now at 00.42am the day after it still has 11%....clearly ther is a fault somewere!!! has anyone had the same experience or got any tips for me please?
cheers, Danny

krue12 wrote:
Yes a lot of people are having this issue it's from the ios 6 update. Some users are reporting battery drains a lot after updating their device
There have always been a lot of battery problems posted about in these forums following each and every iOS update. Personally, I believe that the battery really isn't discharging any faster, it is just that the charging circuit is confused and needs to be reset. I always perform a setup as a new phone for major updates, for example iOS3 to iOS4, 4 to 5, 5 to 6, which should be a 'reset' for the charging system, but I do a simple update for point releases--6.0 to 6.0.1, etc. I have never had a problem with battery performance when performing the full update as new, only when I did a 'normal' update for a point release. If I perform an update with a restore from the old backup after a major update the battery problem did appear.
After every iOS point update I always do a full reset--home and on/off buttons held down until the Apple appears--three or four times over the course of a couple of days. I allow the phone to fully charge overnight every night.
This has always resulted in 'normal' battery life after one or a few reset cycles. By 'normal' I mean that a fully charged iPhone, with email and other notifications enabled and set to push, and no particular attention paid to battery conserving techniques, will discharge to about 89% over a 10 hour day. If I make a few phone calls and surf the web a bit then the level has fell to 70% or so, but unless I heavily use my iPhone 5 it doesn't drop below that point.
Prior to performing the resets the charge level would sometimes drop into the 50's or 60's or even lower in a few hours without using the iPhone. This problem 'scenario' has happened with every iPhone I have ever owned and I've owned all but the original iPhone.
As always, YMMV. I make no claims as to its usability for anyone else.

Anyone having problems Tethering with the USB Cable here is the solution

Here is the solution to what took me 3 months to figure out, absolutely no one in this discussion board had the answer to no even the most expert.
here is the site
http://www.mackb.com/Uwe/Forum.aspx/mac/28074/USB-tethering-with-iPhone

claire10b wrote:
does anyone have any other ideas to try or observations on compatibility between iPhone, Samsung, and HTC for international SMS?
International texting can be a crap shoot. It's not a question of phone compatibility but of carrier interoperability. I regularly text from my iPhone to my (domestic) colleagues (who all have Samsungs) and to a friend with and HTC (an old one, too) without difficulty.
One last question - I've never deleted my SMS from my friend, and would prefer not to. But it's pretty much the only thing I haven't tried. Does anyone think this might solve the problem eg if there are orphan texts somewhere on the network?
I'm not sure there really is such thing as an orphan text. If a text isn't deliverable, the carrier deletes it from it's system. SMS is quite a robust system.
There is no general incompatibility between iPhones and other phones as far as texting is concerned. I suspect what you may be seeing is a combination of an old phone and/or an issue with one or both of your carriers. Intermittent technical problems are some of the most difficult to solve.
I have vague memories of people saying that a trailing space at the end of the text made a difference when they had similar problems. It was a couple of years ago. (Honestly, this problem doesn't come up that often!). I don't recall if putting in the traling space helped, or removing it helped. It may also just have been magical thinkning.
Best of luck.

Is anyone having trouble with there camera on ios 5.1

Lock screen camera won't work, is any body having the same problem?

Even easier: There is no need to double click the home button. One click is enough.

Is anyone having problems syncing iPhoto to iPad 2 after iOS 7.0.3 update? when I click on photos tab, I get a circular dashed loading icon that is perpetually there. It never loads the library

When I click on photos tab, I get a circular dashed loading icon that is perpetually there. It never loads the library. i dont even see the iphoto content! thx for your help!

I am certain too that it is possibly the 7.0.3 update. Have you tried restoring from backup? I am uncertain that might work but its worth a try.
If that doesn't work I suggest that you give feedback to Apple directly. The more about this problem, the quicker it will get resolved.
Here's the link: http://www.apple.com/feedback/ipodtouch.html
Best,
OrlaG

Anyone having problems with airport extreme and a BT homehub?

i have a BT homehub broadcasting wirelessly connected into a airport extreme unit.
the wireless connection keeps on dropping off, i run diagnostics and sometimes i have to re-enter the network password and other times it reports airport is working fine.
i am sure the problem is with the homehub. i wonder if i turned the homehub's wireless of the connection might be better!
any thoughts?
many thanks

Yes, that might help reduce the likelihood that these two wireless routers are interfering with each other's wireless network, resulting in the symptoms you have described.
The other thing you could do is configure the AEBSn for "n only" wireless transmission. You could then use the HomeHub for slower b/g connections, and the AEBSn for faster n-only connections.

Anyone having problem with VM Fusion and lion?

There seems to be an issue in running VM Fusion with Lion. My every attempt is met with the following message
File not found: Virtual Disk.vmdk
Any fix or info would be appreciated.
Thank you

You might want to try this----
http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&d ocTypeID=DT_KB_1_1&externalId=1003483
Good luck

Anyone having problems re-installing itunes 9.3 after uninstalling 10.1 version

I have Windows XP Vista 32, and had problem with Applesyncnotifier not found error msg. The message suggested I uninstall the itunes version I had (10.1) and re-install, which I attempted to do. However, since I have Windows Vista Win32 bit, the 10.1 is not compatible and causes another error msg to pop up. So, I uninstalled 10 and re-installed itunes 9 on my PC. Now, I cannot open my itunes library and get the following error message. HELP!!
"The file itunes Library.itl" cannot be read because it was created in a newer version of itunes"
Please if anyone know how to get my Library to open, let me know.
Thank you.

DSK2691 wrote:
I have Windows Vista Win32 bit, the 10.1 is not compatible
That's a load of bull excrement.
Instead of trying to use an old version of iTunes, install the current version from http://apple.com/itunes/download.

Is anyone having problems using Facebook since the IOS 6 upgrade

MY husband and I have 2 iPhone 5's, an iPad and an iPad Mini. Since we downloaded the IOS 6 we are not able to get comments or photos on Facebook without shutting down and turning the device back on. Is there any way to fix this?

Having similar issues it seems here with Microsft Outlook and iphone connected via Exchange ActiveSync.
Seems when one user creates a meeting and invites multiple other users, one user in particular, when they respond to the meeting request from their iPhone (running iOS6) to either accept/decline the meeting, it ends up canceling the whole meeting and sending out notifications that the meeting has been cancelled and removing it from people's calendars.
Would love to know if someone has a fix for this type of issue. I'm going to try to disconnect the user from Exchange on their phone and reset the connection back up.

Has anyone been having problems with bluetooth in Macbook PRO after upgrading to Mavericks?

Hello,
Ever since I upgrade my 13inch (early 2011) Macbook PRO to OS X Mavericks I have been experiencing problems with bluetooth connectivity. Suddenly my Magic Mouse stops working and I cannot connect it back. Also I try turning off the bluetooth function but is not possible. The only workaround I have found is to restart the system.
I appreciate any help.

Look in the More Like This box to the right of your post.

Problem with Snow Leopard and FileVault after upgrading - how to solve it?

I recently installed Snow Leopard in my MacBook Pro, where I had FileVault running in my old Tiger. After installation and shutting down, it is now impossible to open and log in my user account. I get the message: "Your home folder, which is protected by FileVault, didn't open. It needs to be repaired." After clicking OK, it reads: "You are unable to log in to the user account "(my name)" at this time. Logging in to the account failed because an error occurred." What to do?

you don't have to reinstall. just enable the root account and log in as root. you can access your backup from there. see this link on how to enable root.
http://support.apple.com/kb/TS1278
use your snow leopard disk instead of leopard disk as that link suggests.

Anyone having problems tethering there camera and aperture 3 after upgrading to OS Lion?

Similar Messages

Maybe you are looking for