Anyone having trouble installing the update to Media Encoder CC (2014)? Even Technical Support wasn't able to get the update installed.

I have Media Encoder CC (2014) on Creative Cloud. I have a message that there's an update available, but every time I try to update the program, it fails. Contacted Adobe Tech Support. He spent an hour on my PC trying to get the patch to load. He even deleted the program and tried a reinstall. Everything loaded fine ... except the patch. Just wondering if anyone else is having this problem.

Moving this discussion to the Creative Cloud Download & Install forum.
Gusperrysmom what error message were you able to locate within the installation log for the update? You mentioned you contacted our support team. Do you have a case number which I can reference?

Similar Messages

PT 8.53.10/CS9.0 & HR 9.1, PORTAL 9.1 - Mozilla Firefox 37.0.1 & 37.0.2 are not supported ? I am not getting the log in page & If i access from portal i am not able to get the CS or HR pages in portal !

Hello
We are getting following error in Mozilla Firefox 37.0.1 & 37.0.2 versions, when we tried to access HR PIA or CS PIA, But we are able to get the PORTAL PIA login and able to log in to Portal PIA and If we access CS or HR pages from Portal we are getting the same error below, It was working fine with until Mozilla Firefox 36.0.4 version.
========================================================================================================================================================
Secure Connection Failed
The connection to cs.ntc.edu was interrupted while the page was loading.
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
========================================================================================================================================================
Environment details:
PT 8.53.10/CS9.0 & HR9.1, PORTAL 9.1
MS SQL Server 2012
Windows 2008 R2 (64-bit).
Weblogic & Tuxedo.
IE &Google Chrome works fine.
Appreciates your help !
Thank You

My first guess would be because Firefox disabled insecure TLS fallback in 37.
We have disabled insecure TLS version fallback. If a secure site isn’t working, you can try setting the “security.tls.version.fallback-limit” preference in about:config to 1 and see if it works then.
Weblogic out of the box does not use the newest protocols and is version intolerant. I would need detailed config info to say for sure why PORTAL might still be working. Are they running different Java versions for Weblogic? Is there a mix of Certicom and JSSE being used for SSL? Check out this analysis for more details.
http://remotepsadmins.com/2015/01/24/ssl-weblogic/
Let us know what you find. Others may experience the same thing if they are configured similar to you.

HT1414 I was in the middle of updating my iphone 4s to iOS7, then it crashed, I am able to get the apple simple when trying to restart, then it shows the cord and itunes logo and then switches off again. Itunes on computer does not recognise the phone

I was in the middle of updated iOS7 onto my 4s then it crashed, tried to restore and backup and it wont power off restart it just shows a black screen.
Tried the tips
Does not recognise my phone as I updated Itunes to see if this would work and I have lost all my back ups and every thing,
when i try the power on butter and the home button I get the apple icon, then it shows power cord and itunes logo and then returns to a black screen, I can hear it beeping like when you put it on the charge each time this happens on my PC.
please can anyone else help me???

Unable to Update or Restore..?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Take your time... Pay particular attention to Steps 3 and 4
Note:
Some users have reported as many as 8 or 9 attempts were necessary before success.

For the last week while using iTunes(Windows 7) i have not been able to get the names of songs from CDDB when importing CDs. Very frustrating! Can anyone help me out?

CDDB in itunes is not bringing up the name of songs on CDs when importing into itunes. This has been going on for a couple of weeks. Any help?

I have, a couple different pairs, unfortunately, and still no change. TBH, the headphones don't bug me nearly as bad as the fact that I can't plug my iPod into a radio or speaker with an audio cable and hear my latest purchases. Drives me crazy that I can't listen to my tunes!

I have Photoshop Elements 12 that was purchased for my Windows 8 system in July of 2014. I have never been able to get the organizer to work. I need help getting this portion of the program to work. I would like to talk with an Adobe tech.

How is it that I can download and use Photoshop Elements 12 program editor and not have access to the organizer???

Hi,
The two applications (organizer & editor) can work independently and only talk to each other when they need to.
Are you updating from a previous version or is this the first?
There are (at least) three ways of starting the organizer:-
1) from the Welcome screen
2) from the editor - see button at the bottom of the editor window
3) directly using windows explorer to locate and double click on the following
"C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
[ignore the (x86) part if on 32bit system]
Can you get any of those ways to work? Do you get any error message or does nothing happen?
You could try creating a new catalog to see if that helps.
Start the organizer (in any of the ways) with the Shift key held down while it loads (if it does). That should bring up the catalog manager
Click on the New button (top right)
Give it a name like Dummy or Test and click on OK - that should create & open a blank catalog
Brian

Media Encoder CC 2014.0.1 error on install: I can't unpack the downloaded files (translation).

I have troubles with the latest update of Media Encoder CC (2014). I get an error which says: I can't unpack the downloaded files (translated from Dutch). Please try again. I try again, but it don't help. I have a MacPro early 2008 with Mavericks.
=======================================
Moderator moved thread from Premiere Pro forum to AME, and trimmed the title.

Looks like one component in Media Encoder is either missing or corrupted somehow.
Could you uninstall Adobe Media Encoder CC 2014 and please make sure all files are deleted after uninstall? Then, please try re-installing it.

Is anyone having trouble adjusting your wallpaper and saving it?

After updating my iPad mini, I wanted to change the background. So, I tried and it zoomed in on the picture. I have tried to adjust it and when I do, it goes back to be zoomed in. It's very frustrating!!!!

Because wallpaper images have to work in both horizontal and vertical orientations, then in many cases the iPad will need to zoom in on the image before it can be accepted as wallpaper. That's probably what you are seeing. If your iPad didn't do that you'd end up with blank bands on either side or top and bottom when you switched orientation.
So if you're trying to make a wallpaper with an image file then try it again, but this time with an image of higher resolution than the one you're currently trying with. Ideally, a square image that easily exceeds the pixel dimensions of your iPad screen resolution. I've been able to get the wallpaper resizing/moving to work just fine (most of the time) doing just that. I believe you can also make it easier to work if you turn off the parallex wallpaper feature. To do that, go to Settings > General > Accessibility and activate the option to Reduce Motion.
However I agree with Skydiver119 in that it is still not working as well as the feature should. It should be easier to work with.

Media Encoder CC (2014) Update Error (U44M1P34)

Just did a batch of CC updates and Media Encoder CC (2014) failed with error U44M1P34. Any suggestions on how to fix this?

U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

HT5706 trouble staying connected to air play with Apple TV even though my device is still connected to the internet and playing.

I am having trouble staying connected to air play with Apple TV even though my device is still connected to the internet and playing.

Troubleshoot the network connectivity issues.
Power cycling the ATV and router is generally a good place to start.

Codec mepg 2 manquant sur media encoder cc 2014

Bonjour à tous, je viens de mettre à jour media encoder, il me manque le codec mepg 2 !!!!!!
Après désinstallation et réinstallation, même soucis.
Une petite idée ???
Cordialement Vincent.

OK, c'est clair pour moi.
Tu dis que tu as mis à jour la dernière version d'Adobe Media Encoder. Si tu travailles sur Mac, A tout hasard, as-tu vérifié que c'est bien la version ci-dessous qui est installée.
Adobe Media Encoder CC 2014.1 Update for Macintosh 163.4MB 10/9/2014 Version 2014.0.1 (Sur PC c'est la même version Compilation 8.1.0.122 et je nai pas de problème de conversion...pour le moment )
Adobe - Adobe Media Encoder : For Macintosh
Je ne suis pas du tout spécialiste mais le message semblerait indiquer que Media Encoder essaye d'utiliser un codec installé sur ta machine et qui est incompatible avec ceux d'Adobe. Si tu as d'autres logiciels qui chargent leurs propres codecs, il serait utile de voir s'il y a pas une mise à jour.
Pour revenir à Media encoder, si c'est bien la dernière version que tu as téléchargée, il serait intéressant de donner plus de précisions sur le matériel que tu utilises. Si d'autres membres ont la même config, ils pourraient au moins vérifier s'ils ont le même problème.
Autrement, il ne reste qu'à connaître la réponse d'Adobe.

Is anyone having trouble with the cursor jumping around since Lion was installed on your computer? Never happened until Lion.

Is anyone having trouble with the cursor jumping around while typing since you installed Lion? Never had any problems of that sort prior to Lion. I have an older machine. I believe it is a 2008 MacBook Pro. Especially happens with Yahoo. I am baffled.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
Go figure? Logical, No!

HT3180 Anyone having trouble with Netflix not showing up in the internet menu? I am trying to do a reset, but it says it can't download latest updates try again later.

Anyone having trouble with Netflix not showing up on the Internet Menu? I have tried to do a reset and then restore, but it says that "the latest update download cannot be done at this time, try again later"

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.

Anyone having trouble with the new update for 2010 mac book air 10.8.2?

Anyone having trouble with the new update for 2010 mac book air 10.8.2 ? My 2010 Macbook Air has crashed 15times since the 10.8.2 update. Have only once since owning it.

Turned out the hardware was bad. Apple exchanged it for a new Mac Air and the new trackpad works great. Thank goodness it was a defect. If the trackpads all worked like that I would have been bummed.

Is anyone having trouble with there sounds on there iPad since the recent update? Anyone know what to do about it?

Anyone having trouble with the sounds on your iPad since the recent update this morning. Do you know had to fix it?

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414

Anyone having trouble installing the update to Media Encoder CC (2014)? Even Technical Support wasn't able to get the update installed.

Similar Messages

Maybe you are looking for