Anyone help - need I/O plate for K7N2 Delta ILSR??

I'm based in the UK but will pay P&P worldwide........
cheers
D.

Good luck!
http://search.stores.ebay.com/ws/search/StoreItemSearch?catref=C5&fcl=3&from=R7&frpp=50&fsoo=1&fsop=1&sacat=-1&satitle=k7n2+delta+ilsr&sbrexp=WD1S&sif=1&sofindtype=0&sofp=4&ssPageName=WD1S
Edit: If applicable:
http://www.mycableshop.com/sku/ATXBACKPLATE.htm

Similar Messages

  • Need help with jumper settings for k7n2 delta ilsr

    I have a k7n2 delta ilsr and I'm using a AMD 2800+ barton 333 fsb. I'm not sure what the jumper settins are for this cpu. The users guide only shows 133/166 and 200, can anyone help me with the jumper settings.
    Thanks, Ron.

    Hi,
    As your processor is 333FSB - the jumper should be set to 166FSB as should the BIOS. As your RAM CPU combination runs at 2x166=333 or thereabouts.
    Basically, as a general rule, if you halve the FSB speed of your processor you'll get the setting for both BIOS and Jumper. 200FSB=100, 266FSB=133, 333FSB=166 etc. etc.
    Axel  

  • Kingston HyperX Memory for K7N2 Delta-ILSR

    Hey will my K7N2 Delta-ILSR support the Kingston HyperX serises DDR400-512MB Ram?
    Im looking to buy 2 maybe 3 of these and really want to be sure theyll work.
    http://www.ec.kingston.com/shop/partsinfo.asp?ktcpartno=KHX3200A/256&promo=hx2shp
    I checked the supported ram list for the K7N2 Delta-ILSR  and they wernt on there so i just figured it may be out of date?
    So thanx in Advance for info!
    p.s. It will support 3x 512MB right?

    Has anyone noticed how the Hyper X went from the poor-man's Corsair to being priced equal to OCZ, and usually higher then Geil, as well as usually being very close to Corsair, if not the same? I think only Mushkin beats it out now price-wise...

  • Case Recommendation for K7N2 Delta-ILSR

    Greetings,
    I'm looking for a mid size ATX case that that has the front usb etc. ports prewired as to work easily with a K7N2 Delta-ILSR mb.  By that I mean I don't have to plug each wire individually (with names that don't match) just a plug that goes on the mb.  My eyesight isn't as sharp so hooking up those one wire at a time is tediuous.  Not to mention the lack of starndards   Does anyone know if this is address on the next rev of mb's (with pcix etc).
    Thanks

    Brazos,
    I have yet to see a case that has all the USB wires together, they are all 1 pin at a time. You will find the Antec line of cases very good. (You can always use a magnifying glass to see the pins.) The pin names on the Antec cases are standardized and easy to figure out.
    If you want a good case at a cheap price, then go with the SLK3700AMB:
    If you want a good high end case, then go with the Sonata:
    If weight is an issue, then go with the Super Lanboy:
    Take Care,
    Richard

  • AGP Setup For k7n2 delta ilsr

    I have a k7n2 delta ilsr mb, in display properties on desk top setting tab then advanced button then GeForce tab under adapter information is Bus and memory. To the right of Bus it reads AGP (PCI mode) shouldn't that read AGP (8X), how can I change this. Ron.

    Hi,
    No, leave it at 64 or 128.
    Go here for an explanation:
    http://www.rojakpot.com/default.aspx?location=7&var1=18
    Then - Click on:  "Free Access To the BIOS Optimization Guide" near the bottom of the page - then click on "AGP Aperture Size"
    Axel  

  • New Modded BIOS for K7N2 Delta ILSR

    MSI K7N2 Delta ILSR Modded BIOS based on Official v. 7.80 BIOS
    download here:

     Description: Access through interface which is on insecure interfaces list detected. Request aborted.
    Interface/Client IP address:
     Date: Wed, 18 May 2005 13:11:17 GMT
    Doesn't work for me 
    By the way did u put the bios to vork with 1.3 vcore like the braziliantech one that does't exist anymore ?
    EDIT: Thanks it's working now 

  • Warranty Length for K7N2 Delta-ILSR

    What is the mfg's warranty length on the K7N2 Delta-ILSR?
    I filled out the online support form earlier today but no response as of yet, and me being the impatient rascal I am, I didn't want to wonder all weekend. I bought it October, 2003 and the floppy drive controller seems to have gone out.
    Thanks!
    HH

    Thank you, Glenn!
    Looks like mine is 2 yrs. & 4 months old. Kind of stinks that I lost 5 months on the warranty by going by the mfg. date instead of date of purchase. Its not worth the hassle & would even cost more to RMA it for the controller. Ahh, but this is IT, the "World of Workarounds". I'll live!
    Thanks for your time, Glenn! 
    HH

  • Temperature reading for K7N2 Delta ILSR

    I have a 2500+ Barton (333 FSB) to work with K7N2 Delta ILSR and 2x256 MB Samsung DDRAM(400 FSB).I use MBM to read my CPU temperatures.Usually 45-47 C idle and 54-58 C under full load.I overclock CPU to 400 FSB and I get LOWER TEMPERATURES!!!!!
     I use 1:1 bios setting for CPU and DRAM speeds either 333 or 400 FSB.
     How can this by possible?

    I use Speedfan which seems to follow the temp in the bios. I've heard that MBM is also accurate. As far as your temps going down on a OC that is very odd indeed.  

  • Linux for K7N2 Delta-ILSR

    Hello,
    Does anyone know of with Linux distro is compatible with the K7N2 Delta Series?
    Sincerely, Deft

    Knoppix worked too, even my TvTuner worked.
    Not that I would recommend Knoppix as a solution, I was just playing.
    There is a lot more support for the nvidia kit now.

  • Replacement Chipset/Heatsink Fan (northbridge? for k7n2 delta-ilsr)

       < i need a replacement heatsink and fan for this fan.  that will fit!          Reason: I want a new one that is quiter, and the original fan in it broke.  I also need to be able to buy these part(s) online.

    Me too. You can get them in copper or aluminium. I have the latter, and for more than year now it's been doing a fine job with minimum noise.
    Check it out here:
    http://www.pcabusers.com/reviews/iceberg/p1.html

  • Best agp card for k7n2 delta ilsr

    Hi again folks
    I'm thinking of upgrading my graphics card as although this card has never let me down its the oldest component in my box, I would like to get something in the sub £100 range, I dont do games but may wish to in future, mainly it would be for photo apps/running-backup-watching dvd's etc. any info would be greatly appreciated tia Hazzo

    I notice your talking in £'s so I assume your located in the UK. 
    Have a look around overclockers.co.uk
    For a sub £100 I noticed a good offer:
    HIS ATI Radeon 9800 Pro - £82
    Also, the 6600GT here is only £103.24 (£106 inc delivery), altough only 4 left in stock so buy now if you want one 

  • NEED HELP - K7N2 Delta ILSR

    I really need help. I recently bought my new moboard the K7N2 Delta ILSR and with it a GeForce FX 5600 256DDR, 512 DDD Ram PC3200, an 80Gb Seagate SATA HD, andi have a 2800+ AMD Athlon Xp Barton Core Cpu. The problem i get is that when i try to install Windows XP it says it cant find any hard drives. I saw the other thread that was like this but that one had about RAID so i thought i would ask again. I even tried it with Windows 98 which finds my hard drive and even installed once but after that i tried to upgrade to Windows Xp which didnt work, overwrited some of my Windows 98 files and so that didnt work either and when i try to install it again it gives me errors. PLS help im desperate to get my lan workin with my other PC. I havent changed any options in the bios and i dont know if i have to change anything to make sata work. I dont have a floppy disk either for the hd. I found it in the array thigy as well.  

    Windows will not find a SATA drive you have to tell it you have one bios will only find IDE drives.
    you must hit ctrl F when the screen comes up during boot and creat an array just follow the on screen promps.
    If you bought a OEM board and don't have the SATA Promise disk download it from MSI and a Manual too.
    Either a Raid 0 or Raid 1.
    It looks like you have only one drive so just tell it that and the array will work.
    Than go to your Bois and set Bois to boot from CD first SCSI secound.
    Now you can load your OS. When your OS starts to load it will flash a line across bottom of screen asking if you have SCSI hit F6 do so. The OS will keep loading but when its done it will ask for you 3.5 promise disk. Put it in and load the Fast Track 376 program.
    When you OS is finished loading it will again ask for this disk as the first time it just loads the drivers to memory the secound time to your HDD.
    Good Luck it a little confussing the first time as the programers think there talking to techs not people so use terms that sometimes don't make sense.

  • Kate needs HELP!!! MSI K7N2 Delta ILSR

    Guys...
    pls help me...
    I am assembling, yes I know I am a techi girl...., msik7n2 with radeon9600 and 2xCorsair Value Select 256Mb DDR 400Mhz PC3200 mem...(hence 512mb)
    I installed everything assembled it... booted and loaded fine for about 3 times...
    and suddenly....
    >power on
    >no video
    >no beeps
    >after checking hard nothing happens...
    >only thing I can tell is that the d bracket is indicating "memory section"
    ....d-bracket from MSI K7N2 Delta ILSR is 1,3,4 red and 2 green. Which is according the the manual "Memory Detection Test"-if the memory module is damaged or not installed properly.
    Why woudl a memory suddenly not work?
    I know I was adjusting bios for this and that....  
    I think just before this happened.. I adjusted something on agp setting... but what ahs that got to do with memory?
    COuld it be the mobo or memory or the video card???
    pls help....
    My email is [email protected]...
    please please help...
    and guys in MSI what is your expert opinion? mobo? or memory?
    Heeeeeeeeeeeeeeeellllp...
    thanks...
    Kate x

    hi and welcome to this forum.
    nice to se a girl here for a change
    clear cmos jumper jbat1.
    also try safe mode jumper j10 ans j11.
    also try to reseat memory and dont trust the dbracket to 100%.
    it can show wrong sometimes.
    Quote
    COuld it be the mobo or memory or the video card???
    when you got it running then run http://www.memtest86.com to check memory,
    also what psu do you have ?
    post max amps on 3.3v 5v and 12v rails.
    minimum is 28 35 16.recommended is higher.

  • Can anyone help or answer this question for me. Is there a way to have a private album for pictures sent to my phone? Don't exactly want kids ( niece and nephew ) to play on my phone and see private pictures of my girlfriend

    Can anyone help or answer this question for me. Is there a way to have a private album for pictures sent to my phone? Don't exactly want kids ( niece and nephew ) to play on my phone and see private pictures of my girlfriend

    What about this?
    https://itunes.apple.com/ru/app/best-secret-folder/id488030828?l=en&mt=8

  • Help need my mac pro for school..it has Grey screen..spinning wheel...repaid disk ok...repair disk permission all repaired but one warning...

    Help need my mac pro for school..it has Grey screen..spinning wheel...
    I think I have  mountain lion OS X....I have done I think almost every suggestion I've seen in discussion boards.
    Boot in recovery repaired disk...ok...repair disk permission...all repaired but one warning...I've tried to reinstall lion (without losing data) and it Got all the way to one minute to be done and then the time change back two hours and kept doing this all night long.  I haven't done a back up due to no external for time machine.
    I hope someone can please help me I've been going crazy for a week now trying to figure this out.  I use my computer for school and I'm currently very behind from in my school work  thank you
    Also I've checked my available space  424.91 free of 750 gigs....disk is verified

    Welcome to the Apple Support Communities
    Try holding the Shift key while your Mac is starting to start into safe mode. Then, after starting in safe mode, open Finder, select Go menu (on the menu bar) > Go to Folder, and type /Library/StartupItems. Then, empty this folder and restart the Mac.
    If your Mac starts after doing this, it was a problem with a third-party app that starts automatically when you turn on the computer. It won't start automatically anymore after doing that

Maybe you are looking for