Anyone Interested in Writing an Assignment for me?

If anyone is interested in writing an assignment then please get in touch.

you came to the wrong place

Similar Messages

Is anyone interested in a VI library for the 1-Wire TMEX API ?

After scouring the interwebz and this forum and finding no real solution, I'm am building a library of VIs to interface with a 1-Wire network. I have several of the pieces built and tested to the point where I can search a network and retrieve the serial number (ROM code) for all devices attached. Before I go much further, I would like to get some comments, advice, hints, and general feedback about the VIs as they are and how to move forward with this project. Is there still any interest in this?
This code is for a (likely) one time project and may never be used again. However, if it can be done correctly and may be of use to anyone else in the future, I would prefer to put in the effort rather than just hack something together.
One of my primary concerns regarding the code, besides general architecture, is the handling of errors and some situations which are not actually errors. This has always been a thorn in my side when building programs in LabVIEW.
This project is targeted for use with the DS9490 USB adapter and is written in LabVIEW 8.0. If anyone has any interest, I'd be glad to here from you.
Attachments:
1-Wire.zip ‏206 KB

After scouring the interwebz and this forum and finding no real solution, I'm am building a library of VIs to interface with a 1-Wire network. I have several of the pieces built and tested to the point where I can search a network and retrieve the serial number (ROM code) for all devices attached. Before I go much further, I would like to get some comments, advice, hints, and general feedback about the VIs as they are and how to move forward with this project. Is there still any interest in this?
This code is for a (likely) one time project and may never be used again. However, if it can be done correctly and may be of use to anyone else in the future, I would prefer to put in the effort rather than just hack something together.
One of my primary concerns regarding the code, besides general architecture, is the handling of errors and some situations which are not actually errors. This has always been a thorn in my side when building programs in LabVIEW.
This project is targeted for use with the DS9490 USB adapter and is written in LabVIEW 8.0. If anyone has any interest, I'd be glad to here from you.
Attachments:
1-Wire.zip ‏206 KB

NI PXIe-1620Q - has anyone had success writing device drivers for Fedora 15? I am trying to control a PXI-6509.

I am using Fedora-Core 15 with kernel, 2.6.43.8_1.fc15.i686. I am trying to use NI-KAL ver 2.1 which does not support my version. But it compiles, the nikal driver loads correctly. But after a rebboot it crashes.
Has anyone built any version of NI-KAL that will work with FC15? or via the DDK?

Hi p_borras,
Is there a specific error associated with the crash you are experiencing?
Thanks,
Daniel D.
National Instruments
Automated Test Software R&D

Missing item assignment for "Minority interest in the balance sheet"

Dear Experts,
We unable to perform "Consolidation of investment" and "Validation of Consolidation data" due to our 2 newly created ECCS Accounts not properly assigned. Can any experts guide me how to mapped it? Your fast action is very much appreciated.
Regards/Lisa

Dear Dan Sullivan,
I have created 2 news ECCS Accounts named as SHARE CAPITAL & SHARE PREMIUM. And i do not know how to eliminate these 2 new ECCS accounts with INVESTMENT IN SUBSIDIARY COMPANIES.
When we performing CONSOLIDATION OF INVESTMENT, the error message showed "Missing Item assignment for Minority Interest in the Balance Sheet" and "No Items are assigned to the items (Newly created ECCS Account)".
Further when we run VALIDATION OF TOTALS DATA, the error message showed "Total Assets is not equal to Total Liabilities + Equity" in Step 002.

Can anyone give a good contact number for someone in the upper level of customer service

can anyone give a good contact number for someone in the upper level of customer care i have talked to two of the worst people from customer service, the "supervisor" who was very appropriate did give me a address to mail a complaint which i will but being a disabled veteran of the Iraq war and a member of the wounded warrior project i get upset at certain people who show no respect for the average person and even worse of an attitude to those injured serving their country. I'm in no way saying I'm better its just that i expect a grain of respect as a person, a fellow American working everyday just to get by. my issue was not an impossible issue to resolve but i was told by one rep that it was not possible after my call being "dropped" i called back and talked to another. Luke from call center Washington state told me it was possible but that the phone i ordered two days prior (that rep failed to finish the order)was no longer available and i could pick a different phone not on back order.......i mentioned my confusion to the lack of service and being told two separate things. i asked why this was when i was not the one who made the mistake he told me it was not there fault and pushed the blame to me....he then called me dude and started to speak over me. when i asked to speak to a supervisor he asked why i told him i was no longer interested in talking to him he said why, i asked to be transferred again he kept refusing saying listen man I'm trying to help you what do you want. i asked to speak to his supervisor at least three more times he refused. i asked for his employee information so i could call back to report his rude behavior he refused to give me anything except at the end he finally told me his name.. there is more but my hand is tired is there anyone who can help me? if i find an answer as i will be posting this to many sites i will post it here.

Hello hazzard0011, I want to first and foremost say we truly appreciate your hard work and dedication to our country. It is our commitment to provide a top notch customer experience. My apologies that this hasn't been the case in your recent interactions. We can definitely submit feedback to our upper leadership regarding the matter. Can you please send us a direct message so that we can further investigate? Also, please share details regarding the initial issue. Here's steps to send a direct message: http://vz.to/1b8XnPy
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Anyone interested in working on a LabVIEW book with me?

Hello
Several months back I began working on a LabVIEW training manual and
after becoming busy with other things, progress has stalled out. I am about
70 pages into it.
Here is what I have so far.
Chapter 1 - Introduction (could probably use a little more work)
Chapter 2 - Number Types
Chapter 3 - Strings
Chapter 4 - Booleans
Chapter 5 - Arrays
Chapter 6 - Structures (about 75% done)
Chapter 7 - File I/O (havnt started)
I envisioned this much as an introductory manual for someone who has never
used LabVIEW before. I have my own business in which one of the things I
had hoped to offer was LabVIEW training and thought that it would be more
cost effective if I could produce my own training manual than have potential
students buy a 3rd party book.
I'm not sure what to do now with what I have but these are my ideas.
1) Finish and polish what I have outlined above myself and see if I can sell
individual copies. I think that this would be appropriate for college
courses
using LabVIEW with a need to quickly teach LabVIEW newbies enough
to create vis for small experiments. Perhaps tailoring custom chapters to
show
how to use the classes particular hardware.
2) Find one or two people interested in working with me to make something
considerably more substantial, getting into advanced programming concepts
and
hardware programming concepts. This would continue to be a commercial
project.
3) Turn what I have so far into an open project. Divvy up the chapters and
subchapters
to individuals to really hammer out into something nice. This has a lot of
appeal for
a lot of reasons. I dont think it would be too difficult with the effort of
10-15 people
working a couple hours a week to produce a free document that is better than
all
the books currently on the market.
What do you say? Anyone interested in working on this project with me? I
think it
would be a great service to the community.
Send me e-mail or respond to this thread so I can get an idea of the level
of interest.
Make sure you let me know your LabVIEW background and what sections you
would be interested in working on. Suggestions for future chapters are
welcome, too.
(State Machines, Interface Nodes, GPIB, VXI, etc.)
Mark
Mark J. Sowa, Ph.D.
[email protected]
Strigidae Technologies, Inc.
w3.one.net/~marksowa
P.O. Box 531251
Cincinnati, OH 45253
Voice: (513) 259-9682
Fax: (513) 598-4203

I'm willing. 5 years experience doing GPIB and card-based DAQ along with
playing with niceties like ActiveX, both for external app control and to
expand the available selection of front panel controls. Reasonable amount of
time at the moment though I'm looking for a new job [anyone hiring? ] so
that may change.
A commercial book that gets published is better on the CV than a free one so
I favour working towards the former and doing it as a comprehensive work
that goes into depth. But at the order of 1k pages it's a formidable task.
Publication indicates a publisher thinks it's worthwhile; producing a free
book is an indication only of lots of free time to most people
Mark Sowa wrote in message
news:[email protected].
> 2) Find one or two people interested in working with me to make something
> considerably more substantial, getting into advanced programming concepts
> and
> hardware programming concepts. This would continue to be a commercial
> project.
ActiveX could be the basis of two chapters- "how/why to do it" and a
reference to the common apps and controls. The latter however is essentially
a reference to a load of M$ products and M$ may protest. There's a
continuous trickle of ActiveX messages online so it's probably worthwhile.
One problem is, is there actually a need for another Labview book? You've
started this simply as a tutorial handout to make the cost of your course
appear less. Personally I've not read all of the supplied documentation and
have not bought any Labview books. Aside from the crap "case study" thing NI
produce. There's a few out there already, and I'd need to be convinced the
project is worthwhile before pitching in!

Document type assigned for other goods receipts(MB1C)is WA why?

Hi,
Document type assigned for other goods receipts(MB1C)is WA why?
Thanks

Document type for Goods Receipt is WE but I found in standard(Default) system it is assigned WA?
Can anyone help me on this?
Thanks

Does an action of a GP process have to be assigned for a user

Hi Everyone,
    I'm wondering, does an action of a GP process have to be assigned for a specified user?
    Can I implment the following senario:
    A specified action have to be completed by a user who has a certain role. Then anyone who has the role can see the process in his process list, and if one of them finishs the action, the process will be disappear from the other's list.
    Can I do that?
B'Rgds,
Yining

Hi, my friend.
Recently I found a process can only be initate by assign a user to every role.
Although I have set the roles of the process to be "initation defined" and add the related roles as the "Default Roles", in the initiation screen of process, I got the warning "Assign at least one user to each process role".
So how can I implement my purpose of don't have to assign the specific user to a process step?
Thanks,
YiNing

16GB SODIMM anyone interested in pushing TOSHIBA together to update BIOS

Hi,
Anyone interested to convice Toshiba to update the BIOS Memory Reference Code routine to recognize the new 16GByte SODIMM modules released by the memory company I´m Intelligent for the differnet product lines including laptop Satellite?
We could have 32GB with two slots.
So, please answer the ones interested and stay tuned.
Thanks.
KR,
RI

Thanks, Jerry, for the quick reply.
Before I posted my original question I had been through all available downloads/docs for my Satellite and read up on the Battery Manager feature on some of the Toshiba notebooks.
My Satellite does NOT have the Battery Manager feature/app among the many Toshiba-branded utilities. Only "ecoMode," which doesn't appear to do much exept trim down power consumption, and "PC Health Monitor," which reports info on battery charge level, etc, and allows access to Windows power management plans for tweaking. But no Tosh-branded Battery Manager application...
What I'm trying to determine is whether it could be ADDED to my machine, by updating BIOS to a newer TOSH version (maybe that's a bad idea), or by downloading a utility app for a newer Toshiba laptop, or both?
"Officially" it appears that the Battery Manager (and therefore, Eco Charge) was not available for my older L505, but what I want to know is whether I could add it somehow?

FM account assignments need to be assigned for each grantee year

Hi experts!!
I have a problem when i execute GM_REVAL (Revaluation of Currency for Grants Management). System gets an errror: FM account assignments need to be assigned for each grantee year (Message no. GRANTMGMT363).
I've customized FMDERIVE in order to derive Fund center, commitment item, grant and fund. And GMDERIVE to derive Sponsor Program and Sponsor class. In a FI postings (FB01 or FBCJ), these derivations works ok.
Anyone knows how can i solve this error?
Thank you.

Hello Dolors,
for the revaluation you need to maintain default FM settings in the
customizing. See IMG - GM - master data - revaluation. Note that these
FM master data objects must be valid throughout the budget validity
period.
I hope this helps..
Best regards,
Mar.

Internal number assignment for object AUFTRAG

Hello,
Previously with SAP PM module we had configured the maintenance work order number range for internal assignment to a narrow range of numbers i.e. 12000000 to 12999999.
Following rolling out the functionality to other sites, we required to extend the internal number range (to accomodate the volume to be produced) and have updated this in configuration i.e. 300,000,000,000 to 399,999,999,999.
We are now experiencing an information message each time we Save a new maintenance work order;
Internal number assignment for object AUFTRAG (numbers are in critical area)
Message no. RU 153
When the user clicks Enter to continue a warning message is also displayed on the status bar;
Number XXXXXX for order type XXX within critical area
Message no. CO 395
However, we have investigated this and the work orders are creating normally after this. We have created in the system, the work orders with the prevous number range and also hunders of work orders with the new number range, we do not appear to be experiencing our buffer.
I have check the settings in SNRO config setting. The settings appear as standard with a warning buffer of 5% and the No. of numbers in buffer = 20.
Please can anyone advise how to remove this information message or how to update the system to resolve.
Regards,
Hayley

The message is given by the number range function, according to the configuration of field percentage. You have entered 5% - which means when you reach within 5% of the end of the numbers, you should get the warning. Your range is 300,000,000,000 to 399,999,999,999 My calculation that you should get the warning around 395,000,000,000
I suspect that the issue is linked to buffering of the numbers. Is it resolved??

Can anyone tell me the naming conventions for PSa tables

hi all,
After the data is loaded into the psa. how to look at the records that are there in psa. And can anyone tell me the naming conventions for psa tables.
like BIC/????
thanxs in advance
regds
hari

Hi Hari,
You want to know the naming convention of PSA table. For that there is a simple technique try this.
Go to - T code SE11
In the database table check box give /BI* and click search
next window in the Description Text box give the r data source name(master) like
YIO_ID_ATTR which is assigned to infosource. then click OK.
then you get the psa table structure.
You can take structure and check in the T code SE 11
Hope this is fine.
Regards
Sreekanth

Need help writing a query for following scenario

Hi all, I need some help writing a query for the following case:
One Table : My_Table
Row Count: App 5000
Columns of Interest: AA and BB
Scenario: AA contains some names of which BB contains the corresponding ID. Some
names are appearing more than once with different IDs. For example,
AA BB
Dummy 10
Me 20
Me 30
Me 40
You 70
Me 50
Output needed: I need to write a query that will display only all the repeating names with their corresponding IDs excluding all other records.
I would appreciate any input. Thanks

Is it possible to have a records with the same values for AA and BB? Are you interested in these rows or do you only care about rows with the same value of AA and different BB?
With a slight modification of a previous posting you can only select those rows that have distinct values of BB for the same value of AA
WITH t AS (
SELECT 'me' aa, 10 bb FROM dual
UNION ALL
SELECT 'me' aa, 20 bb FROM dual
UNION ALL
SELECT 'you' aa, 30 bb FROM dual
UNION ALL
SELECT 'you' aa, 30 bb FROM dual
SELECT DISTINCT aa, bb
FROM (SELECT aa, bb, COUNT(DISTINCT bb) OVER(PARTITION BY aa) cnt FROM t)
WHERE cnt > 1;

Adobe Captivate LMS Compatibility Guide - Anyone Interested??

Why is it so hard to find information about Captivate LMS Compatibility?
I'll admit to being somewhat frustrated with the lack of easily procurable information about how to make Adobe Captivate content compatible with the plethora of LMS products now flooding the marketplace. (There are over 100.) I had hoped for years that Adobe would put up a site (or at least a page or two) that listed LMSs and laid out the correct settings in Captivate to use for each one. Sadly this hasn't happened. And the search function on this forum seems to be broken, which makes it more than hard to find information about a given named LMS.
So in desperation I've decided to try and provide a venue for this type of information myself. I'm going to reserve a section on my website at www.infosemantics.com.au for information specific to Adobe Captivate LMS Compatibility. I'll be listing anyLMS products there for which I can procure information related to using Captivate. Headings on each LMS page will overview the LMS functionality, compatibilty with SCORM or AICC standards, any known issues with compatibility with Captivate content, what Cp quiz settings other users have found work successfully, as well as any modifications to templates, or workarounds that have proven useful.
Naturally, I only have access to a small number of LMS products for testing. So I'm enlisting help from any LMS users on this forum to provide suggestions and information collaboratively.
Here's what I need from you:
Simply go to http://www.infosemantics.com.au/contact and leave a message stating the brand and version of LMS/s you use, and a contact email address where I can reach you for information on how you got your Captivate content to work with it. I will add a new page to the LMS Guide covering every LMS for which people offer information and add the info under each heading. Each LMS page will also allow comments so that other users can offer feedback and suggestions. If the volume of response is to high for mere comments, I can add a forum for each LMS where users can exchange information on what worked for them. User's interested in a given LMS can subscribe to that page so that they will be notified via RSS of any updates to information.
I intend to create test projects in Cp5 that have various combinations of Quiz Settings which (according to user feedback) SHOULD WORK on each LMS. You'll be able to download these zipped SCORM or AICC packages to test on your own LMS as well as the Captivate project files (cp and cptx format) used to create them, so that you can see the settings used. Hopefully this will help you to debug compatibility with your own LMS.
You can also leave a message on the contact form if you are trying to use a particular LMS but haven't had much success and would appreciate getting information about it. I can't promise to find the answers, but someone else that chimes in might be able to do so once they know you're looking.
My sincere hope is that over time this resource will build into something that will save a lot of time and angst for every Captivate developer trying to work with an ever-growing number of LMS products. More and more clients have them. But it's a minefield out there.
Anyone interested in participating in this attempt?

No, I'm not only concerned with Cp5's LMS compatibility.
I intend to put up information about all Captivate versions that anyone can supply information on. Most likely this will be from about Cp3 onward.

Error - GL account has not been assigned for CLEAR in customization

Hi
We are working on ECC 6.0.
When we try to create Excise Invoice through J1IS for Ref doc Type MATD for Material Doc of 122 Movement Type we are getting the following error - "GL account has not been assigned for CLEAR in customisation"
Can anyone help that for which Excise Transaction Type (ETT), the GL account has to be assigned under GL Accounts per Excise Transaction.
Regards
Kapil

Hi,
Maintain the ETT for CIEV - CANCELLATION OF EXCISE INVOICE in following customizing
IMG > Logistics - General > Tax on Goods Movements > India > Account Determination > Specify G/L Accounts per Excise Transaction
Regards,
Jigar

Anyone Interested in Writing an Assignment for me?

Similar Messages

Maybe you are looking for