Anyone know how to? Remove from browser startup and move to icon tray?
Does anyone know how to remove the application (HP Smart Web Printing) from my webpage during browser startup and yet allow me to retain it in my icon tray????? If not I will probably delete it.
Hi,
The only option I know of is to disable the add-on in IE. You can then always just re-enable it if you need to use it. If you want to do this, from the Start Menu, open the Control Panel, open Internet Option, click the Programs tab and click Manage Add-ons. Scroll down the list until you find Smart Web Printing, left click the entry once to highlight it and then click the Disable button that will appear in the bottom right of the window. Re-enabling this is just the reverse.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Similar Messages
-
Does any one know how to remove pop up and malware. There is a lot of pop up on my mac book air OSX 10.10
Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and AdwareMedic.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect everything targeting the Mac.
3. The very best way to prevent the most attacks is for you as the user to be aware that
the most successful malware attacks rely on very sophisticated social engineering
techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
your computer is intended to entice you to install their malware thinking it is a
protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware. -
I don't use facebook or Twitter and I shouldn't have to see references to them in the settings section or the "share" dropdowns of Safari, the photo management screens, or anywhere else. Can anyone tell me how to remove these references?
To the best of my knowledge you can't.
You can try going into the settings and restrictions and turn them off and see if that makes the icons disappear (probably won't) but there's no way to select the icons you want. -
Does anyone know how to remove images from google
i had instagram and i didnt upload images of myself but i only used my own image in the display picture and some how it has gone on to the google image search yesterday i deleted my account but when i checked to see if my images do appear in the google images i had some really bad regrets !! i reallywant to know how i can remove pictures off the google image search even doe this does not kind of relate thank you .
Does anyone know how to remove vocals from an import from I tunes...a polyphonic stereo mix ?
If you are talking about some "Karaoke" method using Logic I'll try to offer one. Before that I must say that most of the Karaoke methods are based on reversing the Phase of one of the stereo channel and bussing or merging the stereo into Mono. The result is: killing all Pan Centered in the mix - like Main Vocal, Bass, Kick, SN ect.
The artifacts of the Stereo FX of the main vocal will stay in the Karaoke, cause the FX is stereo etc.
Here is the Logic Setup I can offer to try some Karaoke trick using Logic.
1. Import a Stereo mix into a Logic Stereo track.
2. Create another stereo track and duplicate (copy) the Original Mix region to the duplicated track.
3. Hard Pan L/R both stereo tracks.
4. Insert an EQ and Gainer plugins into the duplicated track (R).
5. Set the Output select of the both tracks to a Bus and assign the new Aux Track Switch mode to "Mono".
6. Open the Gainer plugin and thick the "Phase Invert" Right button.
7. To keep the "lowend" instruments like the bass and kick, open the EQ plugin and enable the Low Cut filter and try some Hz settings 80-115, or different Q which will sounds better for your Karaoke.
P.S Click the image below to show its real resolution!
Regards,
A.G
======================================
www.audiogrocery.com
Author of: Logic GUI Deluxe(Free), Vox De Bulgaria s.a.g.e vocal pack for RMX, Logic Snapshot Console, RMX Power CTRL - Logic Environment Midi editor for Stylus etc.
====================================== -
HT2500 Does anyone know how to remove a group from the address panel in mail?
Does anyone know how to remove a group from the address panel in mail?
I haven't seen too many questions like this on this forum. Did you also try the photoshop forums?
-
Does anyone know how to remove the fisheye effect from a gopro camera, remove it with premiere pro c
Does anyone know how to remove the fisheye effect from a gopro camera, remove it with premiere pro cc.
Use the Lens Distortion effect, set curvature to your liking.
-
Does anyone know how to remove vocals from an import from I tunes...a polyphonic stereo mix ? What are some other editing allowed on a stereo import (polyphonic mix) Thanks, Sploink.
Does anyone know how to remove vocals from an import from I tunes...a polyphonic stereo mix ?
If you are talking about some "Karaoke" method using Logic I'll try to offer one. Before that I must say that most of the Karaoke methods are based on reversing the Phase of one of the stereo channel and bussing or merging the stereo into Mono. The result is: killing all Pan Centered in the mix - like Main Vocal, Bass, Kick, SN ect.
The artifacts of the Stereo FX of the main vocal will stay in the Karaoke, cause the FX is stereo etc.
Here is the Logic Setup I can offer to try some Karaoke trick using Logic.
1. Import a Stereo mix into a Logic Stereo track.
2. Create another stereo track and duplicate (copy) the Original Mix region to the duplicated track.
3. Hard Pan L/R both stereo tracks.
4. Insert an EQ and Gainer plugins into the duplicated track (R).
5. Set the Output select of the both tracks to a Bus and assign the new Aux Track Switch mode to "Mono".
6. Open the Gainer plugin and thick the "Phase Invert" Right button.
7. To keep the "lowend" instruments like the bass and kick, open the EQ plugin and enable the Low Cut filter and try some Hz settings 80-115, or different Q which will sounds better for your Karaoke.
P.S Click the image below to show its real resolution!
Regards,
A.G
======================================
www.audiogrocery.com
Author of: Logic GUI Deluxe(Free), Vox De Bulgaria s.a.g.e vocal pack for RMX, Logic Snapshot Console, RMX Power CTRL - Logic Environment Midi editor for Stylus etc.
====================================== -
Does anyone know how to upgrade from 4.1 to 4.3 ios?
After being tricked by the fast talking smoothy helper at Apple store in London to buy a micky mouse ipodtouch (fourth generation) two years ago I am stuck at ios 4.1 and find that all the useful applications need 4.3 or more. So I went to the trouble of letting the macbook stay open all night to load yet another micky mouse version of itunes so that I can upload the more recent version of ios and now (since I don't want to continually have a lot of rubbish on the ipod I disabled the automatic sync "feature") I can only go round in circles whereby the only real possibility left is to turn on the autosync feature. I have had messages like "your ipod will be completely erased if you proceed" and "do you wish to fiddle another few days with this nasty system, then click on continue" and so on.
Does anyone know how to upgrade from 4.1 to 4.3 ios?
That would be great (maybe) because otherwise I will toss this children's waste product on the floor and set up my HD camera to show how easy it is to smash the brightly lit screen into pieces and relieve myself of trash which Apple sell to unsuspecting gullible humans who believe that they are not being tricked by such a nice company who produce shiny colourful gadgets which only work for a month or two before becoming 100% obsolete.
Great to hear from those who have wasted many months of their lives and discovered how to trick the system into doing a simple update operation!
I am insulted by the tricks that fool many and that apple pretend are "necessary".
Germany 2014 01 11 16 19 27Illaass, your help is amazing - miles better than anyone working in this part of the world who is paid - and you do this for free - because, like me, you LOVE to help people!
BUT, as I said above -
1. There is nothing "mobile" under Application Support. For whatever reason.
2. Devious - that Apple has set up iPod to not show in Finder - a red herring and sign that corruption is visible.
I will try iFunBox next and it sounds like they provide this for the more serious users but use a trivial name to excuse further strangeness.
After
There are purchased items on the iPod that have not been transferred to your iTunes library. You should transfer these items to your iTunes library before updating the iPod. Are you sure you want to continue?
I get
Updating to iOS 6.1.5 will backup and restore the apps, media, contacts, notes, and settings on your iPod touch.
Please do not interrupt the update, which may take an hour or longer to complete.
Cancel Update
And then I wait for hours to arrive at the above mentioned
Backing up iPod \\\\\\\\\\\\\\\\\\\\\\\\\ Stop
and then as above
An error occurred while backing up this iPod (0xE8000084). Would you like to continue to update this iPod?
Continuing will result in the loss of all contents on this iPod.
Cancel Continue
and so we are back to where we always land - the user is left in the Apple designed sabotage situation which annoyed me so much initially.
"Most users will give up at this point, loose all the data or buy yet another disposable from Apple. Less than 3% will work their way to this site and 90% of the 3% will leave the iPod to gather dust in the hope that someone will help later. In all, Apple gains, since people blame themselves for "mistakes" which Apple programmed to throw out users who do not take the 100% Apple path. But Illaass and myself still play the game of "trying to fix" something which Apple don't allow." was the comment which I was going to write but decided against it, adding no value to the conversation other than explaining one reality which we all hoped could be wrong but which I thought to have a very high chance of being closer to the truth.
Apologies for my doubts towards the integrity of the creators.
2014 01 13 12 11 58 17
Recheck: Under Application Support "mobilesync" folder has appeared (MobileMeSyncClient has also appeared [while again trying to update iPod] with zero size) - Good news, a Backup file is there, but it is only 3GB while my iPod has 32GB and is close to full (800MB free space).
Latest at
2014 01 13 12 09 22
The iPod could not be restored. An unknown error occurred (9).
More Infomation OK
So it looks like I may have lost all the important pictures documenting various items all around Europe for the last two years - luckily I moved a year ago from the iPod toy camera to a Panasonic real camera with SD card which can be read on any computer. Hence important items lost may only be older than one year rather than the most recent items.
Glad I have changed to Panasonic since they don't try to screw you when you don't use their system.
I will now check the "more information" rather than just click on "OK" since I am of the 3% who "don't accept cr*p".
For full information I quote that the iPod now shows a screen with a USB ikon, an upward arrow and an iTunes ikon (all micky mouse language which reduces transparant, clear and technical discussion and thus covers the trail of "where things went wrong").
The iPod is still attached to the computer but the above MMTALK may mean that the iPod should be attached via USB to the mac. I record much of this activity on Video to be able to later prove EXACTLY what occurred, rather than having to rely on screenshots and opinions. We are after all dealing with important items which may later be required to be shown in court, as evidence against fraudsters.
The "More Information" link leads to
Resolve iOS update and restore errors in iTunes
which I have already seen before.
I clicked on OK and a help screen (unnamed as ever because no one like myself demanded that the help screens be named for later discussion) arrived:
You can help Apple improve its products a
while copying this into this message the computer began to start up Final Cut Pro and this was cancelled, then iTunes came up with a message:
iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes.
ok
And I presume the earlier message about helping Apple is gone because I keep getting interrupted by this message called
iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes.
ok
it has appeared now at least six times interferring with anything else I do. Each time I try to write, this message appears and blocks, but only when I write. I tried to do a carriage return and the message appeared taking the carriage return as acceptance of the OK in the
iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes.
ok
Message. But since I have not removed the USB and keep returning to this message I am able to write for a few seconds (now 30 seconds or more) and the message remains on the screen but not blocking this conversation. It appears to be random but in fact as you can later see from the video, it is not reappearing each periodic number of seconds but as I reach a new comment.
I will try to close iTunes so that this can be stopped (I clicked on OK and it appeared another few times, each time I clicked on ok and now it has left me in peace to write here although iTunes is still not yet closed).
Difficult to log down all the strange behaviour but I think you can get the gist of what is going on.
2014 01 12 12 49 27
Should I remove the iPod and stop iTunes? I have a nasty feeling turning to indifference since I have video footage which will verify all the above in a court of law if later required. The truth must always win over any devious attempts at forcing people to do things they don't want to ;-)
2014 01 13 13 03 48 -
Here's a screenshot. I've tried everything to make it go away, including changing the browser fill color, but this just wont change. It does disappear when I preview the site online, though. Does anyone know how to remove this color? Thank you in advance!
Hi Jessica,
Please go to View > Click "Hide grid overlay".
Regards,
Aish -
Anyone know how to remove a envelope around a PDF file?
anyone know how to remove an envelope from a PDF file imported to AI?
Ask your question in the Acrobat forum:
http://forums.adobe.com/community/acrobat/acrobat_windows -
Does anyone know how to remove multiple wireless profiles?
Interestingly enough, I recently setup a new computer with the same itunes library as my old computer which I moved to another part of the house. I renamed BOTH libraries from their previous names. These are both iMacs. Now, all my iOS devices (iphones/ipads/etc.) show up on BOTH and wirelessly sync to BOTH! So, I turned off wireless sync on one of the machines but the devices still show up in the menu. Also, on the devices themselves both libraries show up as available to sync. Does anyone know how to remove the wireless capabilities from one computer or device so the devices just sync with a single library?
The instructions that are on reedcorner are great, however if you wish to do things in a simpler way; I have created an Automator workflow that can take you through the process. You can download it here: https://public.me.com/edson.ajj
-
After following the instructions to reset my ipod classic i am confronted with a red cross. Does anyone know how to remove this?
Hello theplantman5,
Thanks for participating in the Apple Support Communities.
If your iPod only shows a circle and cross (or x) screen after resetting or restoring it, try placing it in Disk Mode and restoring it.
Restore iPod from Disk Mode
Disconnect iPod from your computer.
Manually put iPod into Disk Mode.
Open the latest version of iTunes and connect iPod.
Restore iPod.
If these steps don't work, or you've already completed them, your iPod may need service:
Setup Service for iPod
If you cannot force your iPod into disk mode and restore it, then your iPod may need service. Click one of the links below to setup an iPod Service Request online or make a reservation at the Genius Bar before visiting your local Apple Retail Store.
Apple Retail Store
iPod Service Request Online
You can find the steps above in this article:
iPod Displays a Red "X" Icon - Apple Support
All the best,
Jeremy -
I think my iMac got virus on my iMac through opening an email from Facebook on Safari, anyone knows how to do a completely erase and clean up of the iMac?
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file. -
Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.
I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help. -
my ipod wont let me buy any appps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout
To change asccount information see:
Changing Account Information
For the code issue this may help.
iTunes Store: My credit card's security code or zip code does not match my bank's records
For a standard iTunes account you need a valid payment method even for free apps and app updates.
What is making it think that you own money for an app upgrade?
Maybe you are looking for
-
Comment: Lion's lack of Exposé is lame.
I am not saying that I don't see potential in the new Mission Control (i.e., the all new "Über Master Control Center Station" - whetever). All I am saying is that I really don't like that the "new" Exposé (i.e., "All Windows") does NOT do two very ha
-
I'm using the interface (Firmware V1.24) on a D-Link DPR-1260 Print Server, connected to an Epson Printer/Scanner. When I hit the "Scan" button, I get an "uncaught exception" error. This firmware has been working for years (at least back to Firefox 3
-
Hi I tried to take an integer as in input and then perform some calculations...but I found that the input that I am taking is somehow garbled...( I find the values stored in the variables different from the ones that i had input ). Will you please he
-
Login opens each time but elements 12 will not load
I loaded Elements 12 box version over the weekend. When I try to open it the initial login opens each time and after entering the correct ID and password it closes and Elements does not open. This occurs from the Elements/Organizer pop up, from with
-
Every time i try to add a folder to my library itunes crashes
when i get the menu to add a folder, i select the folder then itunes just freezes up and i have to go through the end process menu to close it