Anyone know how to reset the lens correction filter? (it's using the wrong scratch disk)
OK, to back up a little, I recently discovered that photoshop was using the wrong drive for it's scratch disk (it wasn't obeying the preferences I'd set). So, I reset the photoshop preferences file (ctrl-alt-shift & open photoshop).
Trouble is, the lens correction filter is still using drive "F:" (my only scratch disks are C, D and I). It access it at a root level and creates some temporary files while the filter is in use.
Does anyone know how I can get photoshop to behave?
Thanks
See my reply to this question in your original thread:
http://discussions.apple.com/message.jspa?messageID=11675339#11675339
Please try to keep all your responses in the thread that you started there. It makes it much easier for the folks who are trying to help you, keep track of what has already been suggested. Thank you.
Similar Messages
-
I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x? -
I have a late-2011 13-inch MacBook Pro running OS X Yosemite. (Standard configuration).
My problem is that I downloaded a fan control application and it worked perfectly, but it started to get annoying so I deleted it.
Does anyone know how to reset the fan speed back to factory settings (Maybe a command in terminal?)Hello damo1177,
It should help to reset your system's SMC and NVRAM.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
Allen -
Does anyone know how to reset your security questions?? I loaded an itunes gift card on new ipod but when trying to make a purchase, itunes is asking us the incorrect security questions?! (for 1st time purchase) I know the questions are not what I chose because I wrote the questions & answers down when setting up the ipod. Any ideas??!!!
Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
"done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
should be asked to verify your security code for the credit /debit card and NOT the
security questions.
d. At this time you can remove the card by going back in to edit the payment info and
selecting "none" as the card type then saving the changes by selecting "done". You
should now be able to use your iTunes store credit without answering the security
questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends! -
Hi my boyfriend and I split up and we agreed I would keep the iPad. Since breaking up we are no longer on speaking terms but the iPad is still signed In to his Apple ID. Does anyone know how to reset the iPad without his password?
No, there is no way to reset the iPad without the AppleID and pasword.
See here: http://support.apple.com/kb/ts4515 -
I received some instructions but they did not work. Does anyone know how to reset this?
1 - Does it boot into Leopard?
2 - Does it have any important data on it that is not backed up elsewhere?
It it boots into Leopard you could continue using it and hope that you find your Leopard install disks later or discover some other way to overcome the lost password.
If it is fully backed up or has no important data on it you could install Tiger. -
my front camera is not working. it shows the shutter pic and won't work on any apps. does anyone know how to reset it? i have already done reset and full reset.
Did you try to set it up "as new device" without using the backup afterwards? How to set up your iPhone or iPod touch as a new device
If this does not work, get it serviced or visit your next Apple Store. -
I have a new HP Officejet 6500A plus. I cannot get it to connect to my Airport Extreme V5.6. It see the wifi signal but Fails on "Filtering" and possibly the channel. Does anyone know how to reset or reconfigure filtering and channel on the old airports?
This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
(PS Everybody please make noise on this one so apple comes up with a solution.)
< Edited by Host > -
I don't know of there is anyone than can fix this age old Apple problem. Does anyone know how to retrieve apps under an old Apple ID when the email used for that account no longer exists & I can't remember the password? After speaking with Apple Acct. Security, I got the security Q right but my birthday was wrong! They wanted the serial number from my phone that was 3 iPhones ago! Seriously??!!
Any updated way to work around this? No Apple people can correct it.
Thanks,
JoeYou need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122986) -
HT5312 does anyone know how to reset security passwords
hi everyone anyone know how to reset sercurity questions if you forgot them
1) Apple ID: All about Apple ID security questions
If necessary
2) See Here. Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
3) Or Email Here > Apple Support iTunes Store Contact -
I think my iMac got virus on my iMac through opening an email from Facebook on Safari, anyone knows how to do a completely erase and clean up of the iMac?
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file. -
Does anyone know how to get a preflight file signed by apple for the 21 mac
does anyone know how to get a preflight file signed by apple for the 21 mac
im trying to get a hold of them to see if they can deauthorize a computer. I am unable to do it because i can't get the internet to hook up. And i got a new laptop that i get the internet on but i can't authorize it unless i deauthorize the other one. i've called apple 3 times and theyve not been very helpful saying i need to get hold of itunes.
-
When I accept an email invite from a client and want to save it to a Google calendar, it saves for 30 seconds and disappears. Does anyone know how to save a invite to a Google calendar in the Mac Calendar app?
When I accept an email invite from a client and want to save it to a Google calendar, it saves for 30 seconds and disappears. Does anyone know how to save a invite to a Google calendar in the Mac Calendar app?
-
My phone says touch id is expired or invalid does anyone know how to reset this?
i have to sign in with my apple id and password every time i buy from i tunes does anyone know how to reset touch id?
Matthew ...
You will have to sign in using your Apple ID and password when purchasing from iTunes.
It's a security precaution. -
Anyone know how to reset my iphone vm password (so I can listen to my messages) while in Canada and not turning on cellular so I don't get charged for roaming? Verizon says its an iphone issue and Apple says to contact my carrier?! I don't want to pay for roaming and I am able to use my phone fine and also connect to wifi while at friend's houses etc.
It's not a Verizon reset - under General and phone there is a place to reset my password however I can't do it without cellular turned on.
Maybe you are looking for
-
Fix for Error 1417 with new itunes 7
This worked for me when I got that unknown error - 1417 (can't update ipod) Step 1: Disable all third party programs and services via MSCONFIG Article with step by step instructions found here: http://docs.info.apple.com/article.html?artnum=302538 St
-
I want to wipe Ipad and do a clean ios install, but forgot my restrictions passcode
I want to wipe my Ipad 3 and do a clean installation but forgot my restrictions passcode, all of the reset functions are not avaliable.how can I do this to set up as a new Ipad?
-
Computer Not Listed in HP Parts Store
Hello, I have a HP Pavillion P7-1254 (details = http://h10025.www1.hp.com/ewfrf/wc/product?product=5192660&lc=en&cc=us&dlc=en&tmp_track_link=ot_we/p...). The motherboard in this computer contains 4 SATA data outlets, 3 of which are being used by the
-
Is there a way to insert word count? I have some professors that want a word count and I wanted to know if there was an "insert word count" somewhere?
-
FRM-41085 when opening headstart form qms0006f
Hi, I am upgrading an 6i Forms environment to an 10g Webforms environment. Currently the application is running fine, except for all the Headstart forms (f.e. qms0006f, Preferences). If I open this form, I first get FRM-41085: Error getting Group Row