Anyone Know if Zen 4.1 Works in Non-NetWare Environment?
We are about to migrate our Novell system to Windows, and I am wondering if ZenWorks 4.1 will operate without eDirectory and the NetWare client. We would very much like to retain the NAL window and our existing snapshots rather than have to start from scratch with SMS or whatever. I have browsed around the Novell web site and get the general impression that the answer is 'yes' but I can't find seem to find anything specific about version 4.
If this isn't the right group can anyone point me in the right direction?
If anyone has done this migration could they provide some advice? I'm not needing reams of detailed information - just a basic overview of the process.
Thanks a lot in advance to anyone who can help.
Please do not use the email address as it is
a spam blocker.Please reply to the newsgroup only.
Alan Greenwood,
> We are about to migrate our Novell system to Windows, and I am wondering if ZenWorks 4.1 will operate without eDirectory and the NetWare client. We would very much like to retain the NAL window and our existing snapshots rather than have to start from scratch with SMS or whatever. I have browsed around the Novell web site and get the general impression that the answer is 'yes' but I can't find seem to find anything specific about version 4.
>
There is, but it is not pretty. See:
http://www.novell.com/documentation/zdpr/index.html
"Deploying ZfD 4.x in a Windows-Only Network"
- Anders Gustafsson, Engineer, CNE6, ASE
NSC Volunteer Sysop
Pedago, The Aaland Islands (N60 E20)
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
http://support.novell.com/enhancement
Using VA 5.51 build 315 on Windows 2000 build 2600
Similar Messages
-
I have just purchased a new iMac OS Xlion version 10.7.3 and I'd like to install Windows. I have a disc for XP but the Boot Camp Assistant manual only refers to Windows 7. Please does anyone know if it will it work with XP.?
Get a Virtual Macine software program, Parallels, VMware Fusion or VirtualBox, and install XP in a virtual machine.
You can't install XP in a Boot Camp Partition with Lion or Mt Lion, only Win 7. -
does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?
Several ways to get similar results. Image > Adjustments > Posturize with low values similar to what you'd use n Cutout. This is the most flexible way I can think of as you keep the image in RGB mode with layers intact. A more radical approach would be to reduce bit depth using Indexed Colour. You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color. There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
Now if only this forum could filter out bizarre content. -
I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?
A reply to similar question (Q & As , in product page Apple Store) says:
"...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it." Answered by Enrique T from Lima Oct 25 2013.
If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
Hopefully this helps.
Good luck & happy computing! -
I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you
"iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer with OS X Lion; or a PC with Windows Vista or Windows 7 (Outlook 2007 or 2010 or an up-to-date browser is required for accessing email, contacts, and calendars). Some features require a Wi-Fi connection. Some features are not available in all countries. Access to some services is limited to 10 devices."
From here > http://www.apple.com/icloud/ -
I have a Linksys 10/100 5 port workgroup switch attached to an Airport Extreme to expand the number of ports. Does anyone know if this setup will work properly?
Sure - just be aware that it will limit you to 100Mb/s internal network speed. If you want to be able to transfer files internally on your network faster, look into a gigabit switch.
Matt -
Does anyone know whether iTunesU can be used in a secure environment for corporate training? Looking at previous posts it does not seem like it?
Sorry, but iTunes U is only available to K-12 public school districts, private schools and two- and four-year accredited, degree-granting, public or private colleges and universities. It's not available for corporations.
Regards. -
i am having a problem with my back lit keyboard on my 13in mac book pro. i have the box checked in the keyboard setting for auto so the keyboard should turn on and off in low light conditions but it doesnt. anyone know how i can getit to work properly?
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
HT5556 This doesn't seem to work in Australia. Anyone know how to make it work?
Anyone know how to get the camera redemption feature to work in Australia?
Anyone know how to get the camera redemption feature to work in Australia?
-
Anyone knows whether this method will work?
Hi,
I am trying out this method to construct an applet but I couldn't get it to work.Does anyone here know whether this method will work and how to debug it.Thanks.
import java.awt.*;
import java.applet.Applet;
import java.awt.event.*;
public class Project extends Applet implements ActionListener {
private Button circle, square;
private Model aModelInstance;
public void init() {
circle = new Button("Circle");
add(circle);
circle.addActionListener(this);
square = new Button("Square");
add(square);
square.addActionListener(this);
aModelInstance = new Model();
public void paint(Graphics g) {
aModelInstance.display(g);
public void actionPerformed(ActionEvent event) {
if (event.getSource() == circle)
aModelInstance.getCircle();
if (event.getSource() == square)
aModelInstance.getSquare();
repaint();
class Model {
private aModelInstance.display(g)
public void getCircle() {
g.setColor(Color.red);
g.fillOval(145,89,122,122);
private aModelInstance.display(g)
public void getSquare() {
g.setColor(Color.green);
g.fillRect(145,89,122,122);
public void display(Graphics g) {
}It will work for the most part put there is a few problems that you would have to work out. Most of the problems are in the inner class Model. I commented out a couple of lines in there that did not make sense. In the getSquare() & getCircle() methods you are referring to the variable 'g' where there was no declaration for that variable, in Model. So I modifed the method to have an input parameter of Graphics, that will need to be passed to the method. Then I modified the code in Project so that it passes Graphics when it calls those methods.
The code now compiles cleanly but there is still some work for you to do. You should modify the getSquare() and getCircle() methods to return the Graphics. Then in the actionPerformed() method, call the paint method with the returned Graphics. Good luck.
import java.awt.*;
import java.applet.Applet;
import java.awt.event.*;
public class Project extends Applet implements ActionListener {
private Button circle, square;
private Model aModelInstance;
public void init() {
circle = new Button("Circle");
add(circle);
circle.addActionListener(this);
square = new Button("Square");
add(square);
square.addActionListener(this);
aModelInstance = new Model();
public void paint(Graphics g) {
aModelInstance.display(g);
public void actionPerformed(ActionEvent event) {
if (event.getSource() == circle)
aModelInstance.getCircle(this.getGraphics());
if (event.getSource() == square)
aModelInstance.getSquare(this.getGraphics());
repaint();
class Model {
//private aModelInstance.display(g)
public void getCircle(Graphics g) {
g.setColor(Color.red);
g.fillOval(145,89,122,122);
//private aModelInstance.display(g)
public void getSquare(Graphics g) {
g.setColor(Color.green);
g.fillRect(145,89,122,122);
public void display(Graphics g) {
} -
Anyone knows which microsoft messenger version works best for mac??
i installed microsoft messenger for mac but i cant receive file transfer from my contacts (they are windows user) and i cant make video/voice call. anyone knows which version of messenger for mac that has overcome these problems?
http://www.officeformac.com/ProductForums/MacMessenger/
-
Does anyone know how to get mpeg2 working on lion?
I just bought the mpeg2 plugin so that i can use MPEG steamclip but it wont install. It says it can be used with LION.
Does anyone know how to fix ?I got a Garmin Zuno 660 and I´d just connected the USB port and then the Garmin Base Camp can recive data.
What am looking for is a device so Garmin Base Camp can recive live GPS data on the run.
Sincerely
Ib -
Does anyone know of troublefree editor that works?
What I want, is a video capture/editing program that works trouble free; or as close to that as possible.
I've upgraded from Premiere 10 to 12 and many versions prior to those, simply hoping that the next version will resolve my constant issues that involve freezing, glitchy capture problems, interminable "hourglass" (formerly) on the screen while I wait for the program to do.. something...
I've upgraded the program, upgraded computer components, but year after year I seem to get the same results and have teh same probelm with premier.
It's happened again while I am typing. the video just stopped capturing, for no apparent reason, on the other computer that was doing nothing ELSE but capture video on Premiere 12.
I've upgraded computer components. That never helps, or at least never seems to, either.
I still have a program in Premiere that freezes, intermittently won't recognize capture formats its recognized before, stops recording the media on its own (after I've walked away hoping to come back two hours later to edit the successful transfer, only to find out it stopped 10 minutes in.) or tells me there was some error in capturing so doesn't save the transfer but only tells me this the full-two-hours later.
Look, I know I'm not an expert.
But I'm no novice either. I used to edit video for a living.
For home use, I owned and tried using the original Premiere program released in the 90's.
My frustration with Premiere is that I keep expecting these glitches, problems to go away with the next version, then the next...
Any informative, practical support for the product seems to ONLY be this forum, which I've notice usually gets the "poster" even more frustrating responses that put the responsibility on the user to do all the exhaustive system information gathering, which results in a "scattershot" guess from a Responder, which requires the User (Me) to spend an incredible amount of time, have the motivation, not to mention some level of expertise, to go through, all of these proposed steps only to discover they have nothing to do with your problem or be told in some followup response that they didn't do it right. Viewing myself as a "typical" home-consumer user, trying to preserve family videos, I find myself simply walking away; at some point (usually the holidays) tackling it again months later.
When I flip the light switch and the electricity is "down", I am not expected to run tests all the way back to the hydro-plant.
The damned lights are supposed to come on when I flip the switch and they usually do.
I understand entirely that there are differences here.
But meanwhile, video formats continue to change, my family videos recorded on now obsolete formats continue to build up, become unviewable for all practical purposes, there's no quick, relatively easy way to transfer them to the "new format" and this cycle goes on and on.
I shouldn't HAVE to shut down firewalls, or change KEYS, or delete lines of code.
I should not have to go to the exe file to see if THAT works.
I should not have to uninstall, reinstall, then hold my tongue just so while it restarts and hiope for the best.
The program should open, when I open it. The program should record video when I click the "capture" button. It should keep capturing the video until I tell it to stop.(Or the power goes out!)
My question is this: I keep my computers relatively up-to-date, so why can't Adobe or SOMEONE produce a program that works? By "works", I mean, plug in my camera (new or old) into an adapter, capture the video to an "editable" format that can be viewed in whatever the "now" format might be? And do this WITHOUT the forums, hours of frustration, and eventual abandonment of the whole idea that seems to be inhereent in YOUR product for he past decade or more?
Pretty unhappy, as you can guess, with you folks.
If you guys at Adobe cannot do this, give me the name of a company and a product that can do these, what should be, simple tasks.
thanks. Sort of.
Ted K Brown [email protected]Ted K. Brown
This is not Adobe. Rather a user to user forum. The frequency of the Adobe presence in this forum is not defined.
By your own wording, your thread question is
My question is this: I keep my computers relatively up-to-date, so why can't Adobe or SOMEONE produce a program that works? By "works", I mean, plug in my camera (new or old) into an adapter, capture the video to an "editable" format that can be viewed in whatever the "now" format might be? And do this WITHOUT the forums, hours of frustration, and eventual abandonment of the whole idea that seems to be inherent in YOUR product for he past decade or more?
Consequently, this is not a user to user question. Likely not even a question specific to Adobe. However, if your issue is with Adobe and not the whole NLE world, you might consider filing an Adobe Feature Request Bug Report Form.
Adobe - Feature Request/Bug Report Form
Or trying to contact Adobe direct to take this matter up with Adobe Marketing or the Premiere Elements Project Manager for a given version.
Your list of "should not have to" is not practical if you have problems with a Premiere Elements version(s) in your specific computer environment
and you want/need to get it to work for you. If not, you go to another product (tryout versions first).
I (user of the Premiere Elements versions) will be glad for the opportunity to go the extra mile to help you troubleshoot a specific problem for a specific Premiere Elements version on your specific computer environment. But it will take good two way communication and follow up and abandoning your "should not have to". If you decide to consider the offer, please let us start with the Premiere Elements version involved and the computer operating system on which it is running and the specific issue.
ATR -
Anyone know why this doesn't work?
Hi,
I am trying to work with layeredPane's, and I am having a bit trouble, Here is my modified code of a java tutorial:
package org;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
* LayeredPaneDemo.java is a 1.4 application that requires
* images/dukeWaveRed.gif.
public class LayeredPaneDemo extends JPanel {
private String[] layerStrings = { "Yellow (0)", "Magenta (1)",
"Cyan (2)", "Red (3)",
"Green (4)" };
private Color[] layerColors = { Color.yellow, Color.magenta,
Color.cyan, Color.red,
Color.green };
private Label[] layeredLabels = new Label[5];
private JLayeredPane layeredPane;
public LayeredPaneDemo() {
setLayout(new BoxLayout(this, BoxLayout.PAGE_AXIS));
//Create and set up the layered pane.
layeredPane = new JLayeredPane();
layeredPane.setPreferredSize(new Dimension(300, 310));
for (int i = 0; i < layerStrings.length; i++) {
layeredLabels[i] = createColoredLabel(layerStrings, layerColors[i] );
layeredLabels[i].addMouseListener(mouseListener);
setupLayers();
add(layeredPane);
private MouseListener mouseListener = new MouseAdapter() {
public void MouseClicked(MouseEvent e) { System.err.println("clicked");
Label label = (Label) e.getSource();
label.setUp();
setupLayers();
layeredPane.validate();
layeredPane.repaint();
private void setupLayers() {
//This is the origin of the first label added.
Point origin = new Point(10, 20);
//This is the offset for computing the origin for the next label.
int offset = 35;
//Add several overlapping, colored labels to the layered pane
//using absolute positioning/sizing.
for(int x=0; x< layeredLabels.length; x++) {
Label label = layeredLabels[x];
if(label.up) {
origin.y += offset;
label.setBounds(origin.x, origin.y, 100, 100);
layeredPane.add(label, new Integer(x));
origin.x += offset;
if(label.up) {
origin.y -= offset;
//Create and set up a colored label.
private Label createColoredLabel(String text, Color color) {
Label label = new Label(text);
label.setVerticalAlignment(JLabel.TOP);
label.setHorizontalAlignment(JLabel.CENTER);
label.setOpaque(true);
label.setBackground(color);
label.setForeground(Color.black);
label.setBorder(BorderFactory.createLineBorder(Color.black));
return label;
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event-dispatching thread.
private static void createAndShowGUI() {
//Make sure we have nice window decorations.
JFrame.setDefaultLookAndFeelDecorated(true);
//Create and set up the window.
JFrame frame = new JFrame("LayeredPaneDemo");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
//Create and set up the content pane.
JComponent newContentPane = new LayeredPaneDemo();
newContentPane.setOpaque(true); //content panes must be opaque
frame.setContentPane(newContentPane);
//Display the window.
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
//Schedule a job for the event-dispatching thread:
//creating and showing this application's GUI.
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
class Label extends JLabel {
public boolean up = false;
public Label(String text) {
super(text);
public void setUp() { up = !up; }
for some reason the mouse listener isn't responding, and i don't know why..
Thats only part of my problem. When the mouse listener does respond, I want to only move one of the labels in the Y direction, and then re-paint everything...
any ideas?public void MouseClicked(MouseEvent e) { System.err.println("clicked");should be small m
public void mouseClicked(MouseEvent e) { System.err.println("clicked"); -
Does anyone know if firewave (surround sound) works with Lion?
Hi - am wanting to upgrade to Lion but need to know if my Griffin Firewave will still work. Hate to lose my sounds :-(
Set up is Imac, Firewave, Edifier 5.1 speakersI installed it and it seems to work fine on the initial launch of the firewave software, but...
I had this problem in Snow Leopard, too. Once I install it, I can open it once - change my settings, etc. After that however it will never launch again. The speakers still work (klipsch 5.1 pro media) just fine, but I can't change any settings.
Uninstalling it as outlined on the firewave webpage, and then reinstalling is not a guarantee that I will ever be able to relaunch it, either (At least with Snow Leopard. I have yet to try with Lion, but I'm curious and will now).
Will follow up if I have more to add, but the short answer from me is that it does indeed work, "but."
I emailed griffin about 6 or so months ago and asked if there was any remote chance they would be upgrading the drivers for snow leopard or eventually Lion, even though the site makes it obvious they don't intend to. The response I recieved reinforced that notion quite clearly.
Maybe you are looking for
-
How to set a few runlevels in /etc/inittab and GRUB?
Hello! Is it possible to set two runlevels, which I can choose from GRUB? My GRUB: # (0) Arch Linux title Arch Linux Multi-user root (hd0,2) kernel /vmlinuz26 root=/dev/disk/by-uuid/e2792ad1-31b8-4621-abb0-9e934759722e ro 3 initrd /kernel26.img # (1)
-
Hello, I'm working with an application where we have many, many, many domain objects that could be added to a "header". In my business/service interface I don't like to write 50+ of addX(...), addY(...), addZ(...) etc. methods. Every domain object ex
-
What is correct boot order.........................
im trying to boot my system from recovery discs,when it is done it ,it says windows installation failed i called tech support,and they say i must change boot order i change order by putting boot from discs,ok can u tell me correct settings on why whe
-
The download manager doesnt update premiere to the newest version 2014.2
my current version of premiere is 2014.0 and the manager tells me everything is up to date. after deinstalling and reinstalling i am still with version 2014.0 i work on a mac with os x version 10.9.5 when i try to download it manually from the websit
-
Hi, I've got a 2G ipod touch that plays no sound whatsoever. The weird thing is that when I play music, the song resets and goes back to the music menu. I've already reset it multiple times and it's no longer under warranty. Could it be a hardware pr