Anyone know the length of the power cable for the official dock for the K1?

The power cable that came with the Ideapad K1 isn't long enough to reach my power strip behind my desk. I was wondering how long the power cable is for the dock that I see in the Lenovo store?
Besides that, I love this tablet, nice and easy to hold, probably one of the most comfirtable tablets to hold (next to what Sony just released). I'm a little disappointed with the wifi connection and the reboots (down to maybe one today with the new launcher *sigh*). Even with the issues, I trust Lenovo more in terms of support then I do anyone else.

Big Daddy, One other thing I forgot to mention is, If you open the case on your device, you'll instantly void any warranty that came with it. Also, bear in mind, any modifications that you make to the antenna system on this device could not only make the FCC approval that Linksys was given for the device null and void. Be very careful with anything like an antenna system on these devices, you can actually recieve RF burns if you contact any bare metal of the antenna system when it is transmitting. Just bear in mind that 2.4GHz is more less the same frequency that a microwave oven uses (although at a LOT lower power). As a radio ham, I've had the odd RF burn and I can tell you, they really hurt!.

Similar Messages

Does anyone know the power cord part for HP A532 printer? I need a replacement cord. THANKS!

Does anyone know the power cord part for HP A532 printer? I need a replacement cord. THANKS!

Here's the steps to follow if your printer isn't turning on.
If you've gone through all those steps and you still don't have power, there are a lot of places that sell a replacement cord and supply for that printer.
I am an HP employee.

Does anyone know the Power Inverter Board p/n?

Does anyone know the Power Inverter Board p/n for the iSight 1.9Ghz iMac? I understand there are several but knowing me, I'd buy the wrong one.

If you commonly like to read posts on a certain subject you can store a query link in your browser to more quickly find specific posts. For example I have the following link bookmarked in my browser.
http://forums.ni.com/ni/search?submitted=true&type=message&q=FPGA&days=7&page_size=10
The advanced search page allows you to define your own search which you can then bookmark.
http://forums.ni.com/ni/search?advanced=true
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

IMac screen has been flickering, does anyone know the problem?, iMac screen has been flickering, does anyone know the problem?

Recently my iMac screen has started to flickering does anyone know the problem?
Any help appreciated

Bad power, unshielded speakers, improper hardware installs which lead to loose cables, can all cause this.

Anyone know the ActiveSync size limit for Sending?

I noticed that I have quite a few Event ID 1008 Warnings on my Exchange server today. All of them are exactly the same and are all for the same user. They occur every 5-10 min. So I have discovered through research that this is caused (at
least in this case) by a message being sent from the mobile device (iPhone in this case) that is to big.
I have run a test on my own device (Droid X) where I attempted to send a message with a 14MB attachment. The exact error is logged at the same time as the other intial error. This is easy enough to fix: you simply need to go to the
Outbox on the phone or device and delete the stuck message.
However, I am now currious where this limit is set and how to find the exact size limit. Through searching no one seems to know, but the limit is deteremined somewhere between 5-10MB. Also, it is not set in Exchange as others like to recommend.
My send connector message size is 50MB and there is no limit set on the ActiveSync policy.
Anyone know the answer to this? Is it an Exchange setting or is it determined by the particular phone/tablet?\
Thanks.
Event 1008 for others reference:
An exception occurred and was handled by Exchange ActiveSync. This may have been caused by an outdated or corrupted Exchange ActiveSync device partnership. This can occur if a user tries to modify the same item from multiple computers. If this is the case,
Exchange ActiveSync will re-create the partnership with the device. Items will be updated at the next synchronization.
URL=/Microsoft-Server-ActiveSync/default.eas?User=USERNAME&DeviceId=ApplC8WFDD8DDDP7&DeviceType=iPhone&Cmd=SendMail&SaveInSent=T
--- Exception start ---
Exception type: System.Web.HttpException
Exception message: Maximum request length exceeded.
Exception level: 0
Exception stack trace: at System.Web.HttpRequest.GetEntireRawContent()
at System.Web.HttpRequest.get_InputStream()
at Microsoft.Exchange.AirSync.Command.get_InputStream()
at Microsoft.Exchange.AirSync.Command.WorkerThread()

Looks like I found the probable location of this size limit. Looking at the web.config file in the
ExchServer\ClientAccess\Sync folder there is an entry for "MaxDocumentDataSize". THe value is currently set at 10240000:
<add key="MaxDocumentDataSize" vaulue ="10240000">
So this is 9.75 MB or there about, which sounds about right. I will try increasing this limit at some point to verify.
Can anyone confirm this?

Does anyone know the max. Amps the iMac draws?

Does anyone know the max. Amps the iMac draws?

does anyone? sure probably. All I know is what's on the tech specs page http://www.apple.com/imac/specs.html
Electrical and Operating Requirements
Line voltage: 100-240V AC
Frequency: 50Hz to 60Hz, single phase
Maximum continuous power: 205W (21.5-inch models); 310W (27-inch models)
Operating temperature: 50° to 95° F (10° to 35° C)
Storage temperature: -4° to 116° F (-20° to 47° C)
Relative humidity: 5% to 95% noncondensing
Maximum altitude: 10,000 feet
Typical acoustical performance Sound pressure level (operator position): 18 dBA at idle4
-mvimp

When I goto app store and select updates and then purchased it spins the hour glass and then go's back to home screen, anyone know the fix?

When I goto app store and select updates and then purchased it spins the hour glass and then go's back to home screen, anyone know the fix?

ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you

Does anyone know the best software to make a scalene triangle using 3 predefined values?

Does anyone know the best software to make a scalene triangle using 3 predefined values?

kitweb,
It is not too difficult in Illustrator.
Presuming the values are the side lengths, you may turn on the Smart Guides and:
1) Create a circle with its centre at X=Y=0 and with its radius equalling the first side length;
2) Create another circle with its centre at X equalling the second side length and Y = 0, and with its radius equalling the third side length;
3) With the Pen Tool click at the centres of the circles (Smart Guides say centre), then at one of the intersections of the circles (Smart Guides say intersect), then back at the first centre;
4) Delete the circles, and if needed Object>Transform>Rotate/Reflect/Move/whatever for the right orientation/position.
Obviously, you may use any order of the predefined sidelengths from the beginning.

I am moving to the uk from oz and was wondering do i have to replace the whole power cable for my mac book 15inch pro....or can i just replace the actual plug in the wall part ..if i can what is this called as when i look on line it just comes up with the

i am moving to the uk from oz and was wondering do i have to replace the whole power cable for my mac book 15inch pro....or can i just replace the actual plug in the wall part ..if i can what is this called as when i look on line it just comes up with the complete power unit...it seems odd that you have to buy the whole unit again...thanks.matthew

All you need is a plug adaptor, if required. Apple sells an adapter kit:
http://store.apple.com/us/product/MB974ZM/B?fnode=MTY1NDEwMQ&mco=MTA4NDE3MDQ

I have the new Air Port Extreeme model A1521 and I need to set up port forwarding for HTTP. HTTP is not on the list in the set up. Does anyone know if any of those choices work for HTTP?

I am on a Windows 7 Ultimate PC and right now there is no Airport utility for setting up the new Apple Extreme so you have to do it on your iPad or iPhone. Does anyone know how to set up port forwarding for HTTP to get to DVR security cameras? There is nothing in the list that indicates HTTP port forwarding.

Thanks for your reply Tesserax as I did figure this out on my own. It took a bit because all of the options are not clear what they are for like the previous Airport Extreme and Apple does not support or guarantee that port forwarding will work for you application nor did any of the Apple support persons I spoke too have any knowledge for this feature. You also have to fill in the public if you are viewing through someone else's Wi-Fi or on your cell phone carrier network. This new Airport Extreme is a bit different since you cannot use the Airport utility on a PC like the older model and if anyone else is reading this they should be aware that if you do not have an Apple computer, iPhone or iPad and I'm not sure if some of the other network enabled devices like iPod Touch that you must use that can do it, there is no Airport utility for the PC and you would be wasting your money or have to take it back and get another brand wireless router to use if you do not own any of the above mentioned Apple products.

Does anyone know the default size for 24 in. imac display?

I inadverently changed the display size on my 24 inch imac. The font in the toolbar at the top of the desktop is larger than I want. Also, when I open windows in different applications, they open larger than the display and have to be downsized in order to see the entire window.
Does anyone know the default size for this display? Or is there a different way to fix my issues?
thanks in advance.

Hi Napamike2: The default setting for the 24" is 1920X1200. If that doesn't get you back to the proper display, maybe you have accidentally activated "Zoom". To check go to System Preferences, Universal Access. Check that Zoom is turned off.
Stedman

I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this?

I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this? I have found GearGrip's LCD harness so that I can do carry-on onto the plane... Or maybe use a Pelican Case to do it as a "checked bag"? Or any other suggestions??! Please help!
Thanks so much!!

I don't recommend you send the iMac in a checked bag. Might get damaged.
Check the airlines website for carry on guidelines.
Or, if you have the original box that the iMac came in, if you have someone who can pick up the iMac for you, send it ahead Fed Ex and insure the package.
Just make sure the display is covered to protect it. A blanket perhaps.
Aloha ...

HT1926 When I try to load Itunes I get this message: Service'Apple mobile device failed to start. verify you have sufficient priveleges to start system. Anyone know the solution?

When I try to reload Itunes I get this error message "Service' Apple Mobile Device Failed to start. Verify you have sufficient priveleges to start system. Anyone know the solution to this issue?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I'm a video editor working primarily in FCP7 and just purchased the latest Mac Pro running Yosemite ? Does anyone know if any options have become available for running FCP7 on this platform ?

I'm a video editor working primarily in FCP7 and just purchased the latest Mac Pro running Yosemite ? Does anyone know if any options have become available for running FCP7 on this platform ?

It would "run" (more like Sunday stroll or walk) if you installed Snow Leopard in a VM. Especially if you have 6-core (and would help to have 6 or 8 cores anyway if you were able to and intend to make best use of nMP for video editing).
If you "classic" Mac Pro was 2009 or later, adding two AMD graphic cards, upgrading the processor to 8-core 3.xGHz would have gotten you a FCP-X capable machine and still dual boot and use Snow Leopard as needed.
Any Mac Pro can now use 1000MB/sec SSD PCIe blade to boot from and/or for scratch and editing to help improve work flow.
SSD Blade Drive for "Classic" Mac Pro

Does anyone know the pricing structure for Digital Marketing Suite?

Does anyone know the pricing structure for Digital Marketing Suite? I asked for info but no one ever got back to me. I don't want to waste anyones time if it's too expensive so I'd like to know up front what the fees/package rates are.
Thanks.
Peter Marino
Owner of an
SEO Comapny in NYC

This is the top story at this writing at AppleInsider:
Like the updated mid-2014 13-inch MacBook Pro with Retina display, Apple's latest 15-inch notebook brings slightly speedier Intel processors. But with memory, graphics and design all carried over from last year, the most substantial change is a $100 price cut.
http://appleinsider.com/articles/14/09/07/review-apples-mid-2014-15-inch-macbook -pro-with-retina-display

Does anyone know the file name of the root ($)?

RoboSource Control unfortunately is not working correctly and a Rollback caused many topics to be permanently deleted. I'm waiting for approval from IT to get the 8.0.1 and 8.0.2 patches applied, but in the mean time we would like to restore our project from server tape backup. Only, I can't find out where the $ root is stored on the server to have it restored.
Does anyone know the name of the file that is the root? I was expecting to see a file called root or $, but can not locate a file named either.

Your DB Administrator should be able to recover a TSM backup OF YOUR ENTIRE DATABASE, not the project, from tape. The database object the DBA is retrieving will not have the $ (or the * sign). It will be named whatever you named the database when you created the database.
Your database name is located on the Connection screen.
Hope it helps...
Steve

Anyone know the length of the power cable for the official dock for the K1?

Similar Messages

Maybe you are looking for