Anyone know what is the tcode for profit center ??

i want to create a cost center but i need to have profit center first right????
because it seem keep asking me for profit center and i dont have one..
pls anyone can tell me the tcode for profit center
Thanks
guanwei.

Hi guanwei,
http://mit.edu/sapr3/docs/webdocs/reports/profitctr/rpPCvol.html
http://mit.edu/sapr3/docs/webdocs/finop/lds/foLDSreptrecon1.html
http://sap.ittoolbox.com/groups/technical-functional/sap-acct/profit-center-substitution-671456
Check these these links may be useful for you.
Reward points if useful.
Regards,
Muneesh Gitta.

Similar Messages

  • What is the tcode for creating a variant ??

    Dear Guru,
    I want to know What is the tcode for creating a variant  which is being used for SM30 's variant option .
    Because we have created a maintenance view and we want to run this trhough tcode..
    but dont know how to do it.
    pls guide through out the procedure.
    thanks & regards
    Saifur rahaman

    Hi,
    If you want to create the TCODE for the TMG you created you must go for Parameter Transaction
    Go to SE93
    Give your Tcode
    Click Create , select parameter transaction Radio Button
    In the Transaction Field Give SM30
    Check the Check box SKIP INITIAL SCREEN
    select your GUI support and SAVE
    in the space provided give F4
    Select        VIEWNAME and give your table name
    Select                  UPDATE  give it as X
    then SAVE
    Edited by: Prasanth Kasturi on Nov 25, 2008 6:54 AM

  • I can't send email from my iPad. I am from Australia but on holidays in Greece. Does anyone know what is the smtp outserver for Greece that I should use?

    I can't send email from my iPad. I am from Australia but on holidays in Greece. Does anyone know what is the smtp outserver for Greece that I should use?

    As you haven't told us who your email provider is, no.
    There isn't an SMTP server for Greece - it is either provided by your email provider, or the Internet provider you are connected through.

  • Does anyone know what protection Apple has for the virus that is supposed to shut us out of the internet on Monday?

    Does anyone know what protectio Apple has for this virus that is supposed to shut us out of the internet on Monday?

    There was a security patch made available a few months ago.  So, if you're up to date, you're fine.  Here's a link to check whether or not you have any problems with that:
    http://www.dns-ok.us
    If the site is green, you're OK.
    The actual virus attack happened a year ago,but the FBI hasput up servers to keep people on the internet, until now. 
    http://www.nbcphiladelphia.com/news/tech/DNS-Changer-Virus-Could-Keep-Thousands- Off-Internet-161442515.html

  • I am aware that the iPod Touch 5g has no official date yet, on the site it only says: Available to ship: October. But, does anyone know what a possible, date for the iPod to be released? :)

    I am aware that the iPod Touch 5g has no official date yet, on the site it only says: Available to ship: October. But, does anyone know what a possible, date for the iPod to be released? :)

    Well, I recently checked apple.com, and the "pre-order" button has been replaced with the "buy now" button. This is a very good sign that the iPods will begin to ship soon! There is still no exact date, but I expect that they will ship within the next 3 days. You should get an email when they have shipped.
    Take care!
    -59Ballons

  • Does anyone know what is the exact HDD model and specs for MacBook Pro (15-inch, Mid 2012)? Thanks

    Does anyone know what is the exact HDD model and specs for MacBook Pro (15-inch, Mid 2012)? Thanks.

    Thanks for responding me,
    I just got this info from the link that you provided me but is there any model name or model number for it?
    or any 2.5 would be work?
    Thanks again.

  • Hello, i am using ipad mini now. When i first receivedHello, i am using ipad mini now. When i charge it till 90%, it will stop charging on its own. I need to reconnect in order to charge it till 100%. Anyone know what is the problem? Thanks.

    Hello, i am using ipad mini now. When i charge it till 90%, it will stop charging on its own. I need to reconnect in order to charge it till 100%. Another problem is when i am using an apps, for example looking through the photo, suddenly the screen will back to Home. Anyone know what is the problem? Thanks.

    This is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
    Unfortunately no one here can access your support history. You must respond to the emails directly.

  • Does anyone know what does the keyword section do?

    Does anyone know what does the keyword section do? Under "Any of the webpages -> Properties -> Basic tab -> Tags/Keywords"?
    Is it used for part of the google search?

    Its tagging (Classification), one of the bright feature of any content management system. It allows author to classify the content in system. There are various advantages but i would refer you to go through http://dev.day.com/docs/en/cq/current/wcm/tag_admin.html. Apart from that you can search in google as well to find relative information about classification in content management system.

  • Does anyone know what ppqryErrorList is used for in EssOtlQueryMembersEx?

    Given a calcscript, I'm wondering if I can get a list of errors back it has multiple errors (e.g. member not found, syntax error etc.) when I run EssOtlQueryMembersEx.
    I've looked at the documentation (http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_api/api_c/otlc/funcs/apcfqmex.htm) and looks like ppqryErrorList does the job for me. However, I'm getting a NULL pointer to ppqryErrorList regardless or whethere there's an error or not.
    e.g. when I call "@ICHILD(blah)" with EssOtlQueryMembersEx I'm hoping the error list (ppqryErrorList) will contain "member not found blah" but it infact returns NULL.
    This parameter on EssOtlQueryMembersEx must be there for a reason. Does anyone know what this is used for?
    Btw, I'm using Essbase 7
    -Steve

    Well, After Effects has a shattering effect, but I'd guess it was a 3D app that created those effects. To see what you can do with Motion, check out this thread:
    Fun with Shattering...
    Patrick

  • What is the TCODE for number change of idoc

    Hi all,
    can anyone help me in chnaging the number range of IDOCS in R/3 system..
    what is the TCODE for that...
    Thanks in advance.
    Cheers,
    Raghavesh

    Hi,
    Please go to transaction SNUM/SNRO and use object EDIDOC.
    Select number range and change to specific number that you wish.
    Hope this will help.
    Regards,
    Ferry Lianto

  • Does anyone know what time the last episode of Breaking Bad starts streaming

    Deos anyone know what time the last episode of Breaking Bad starts streaming on itunes?

    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.

  • What is the tcode for Nominee Form 2 ?

    Dear Mates,
    Kindly help to me what is the Tcode for Nominee Form 2 ?
    Ur's Mohan

    Dear Sandeep,
    Yes we have maintained IT 591 & i didn't any output in EPF report related to this info type 0591. Anyway now my client is asking me form 2 for nominee details kindly let me know is there any tcode?
    Ur's Mohan

  • I was trying to send a video via iMessage over wifi, but was only allowed to send a fraction due to the size limit. Does anyone know what exactly the limit is? Thanks!!

    I was trying to send a video via iMessage over wifi, but was only allowed to send a fraction of the video due to the size limit. Does anyone know what exactly the limit is? Thanks!!

    You said:  "I've never tried the restore function in disk utility. Would that be the same as cloning the drive?
    YES!  See the my old instructions below.  What you might try after step 5 is to restart you MBP holding down the Option key.  Select the new HDD icon and see if it boots.  This way you will know that the new HDD is operable.
    Ciao.
    INSTALLING A NEW HDD IN A MB
    1. Make certain that you have backed up all of your important data.
    2. You will need a HDD enclosure.  One with a USB connection will do.  A 9 pin Firewire is better.
    3. Install your new drive in the enclosure and connect it to your MBP.
    4. Open DISK UTILITY>ERASE.  From the left hand column drag the new drive into the 'Name' field.  Make sure that the format is 'Mac OS Extended (Journaled)'.  Click on the 'Erase' button.
    5. Click on the 'Restore' button (on top).  Drag the old drive into the 'Source' field and the new drive into the 'Destination'  field.  Click on the 'Restore' button on the bottom right hand corner.
      Depending upon the amount of data you are transferring, this may take a couple hours or more.  A Firewire will speed up the transfer.  This will result in both drives having identical information on them.
    6. After the data transfer has completed, you may swap the drives.  Start the MBP and you have finished the installation.  The initial boot may take a bit longer than you are accustomed to, but that is normal.
    7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have.

  • What is the Tcodes for Uploading of data using BDC & CATT

    PP members:
    I was going through the <b>cutover activities</b> ,  and what I understood is  we transfer all the legacy system data into SAP before going live
    The data upload follows certain steps (depends on the organizational design load strategies)
    First we upload all the master data ( material master, BOM, W/C's & Routings)
    Then the transaction data ( Ideally speaking, there should no open orders i.e. WIP as on the day of cutoff )
    If the WIP (Work in Process) is unavoidable then the materials consumed shall be treated as <b>materials of the previous stage</b> and necessary adjustments shall be made after cutover day
    At this point, I could not able to understand what does the author mean <b>materials of the previous stage</b>
    Now comming to the uploading of data into SAP from legacy system, we use tools like LSMW, CATT & BDC
    Is it a must to use <b>only LSMW tool</b> to upload master data or any other upload tools are fine
    Lastly,. I am not sure about the Tcode of CATT & BDC
    Summary of the questions:
    1.What does the author mean  <b>material of previous stage</b>, for WIP materials during cutover activities
    2. Is it mandatory to use only LSMW tool for uploading for master data
    3. What are the Tcodes for upload tools CATT & BDC ?
    Thanks for your time
    Suren R

    Dear,
    1.What does the author mean material of previous stage, for WIP materials during cutover activities - as i understood, what is the stage of material..like it must have gone through 2 work centers and other 2 is left. i.e. you need to create Production order with only 2 operation as other 2 is already over. - usually it is done in such a way that we will create Production order and confirm till 2 operations and WIp is calculated so thatb FI will tally the books in SAP and lagacy.
    2. Is it mandatory to use only LSMW tool for uploading for master data - no you can use any tool as required and suits yr requirement
    3. What are the Tcodes for upload tools CATT & BDC- BDC through a prog in SE38. CATT through - SCEM.

  • Hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you

    hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you

    Legality aside (I'm not a lawyer and have no opinion on the matter) in order to make a purchase of an iPhone 5 you would need to travel to a country where they are for sale and purchase it there. Be sure to get one that is officially unlocked or you would not be able to use it with your cell carrier. Be sure that your carrier supports use of the iPhone before you buy. Also note that the warranty of the iPhone is only valid in the country of purchase.
    Appe does not ship outside of the countries where it sells the phones.

Maybe you are looking for