Anyone know what the capture presets are for China?
I am there/here and would like to record a TV segment just like I do back home in Canada, eh! Just wondering if I should use DV NTSC or DV PAL, 48 kHz or what? I have an analog to digital converter that I feed the audio (X2) and the video (1) from the TV into and then into my PBG4. Thanks!
China is on the PAL TV standard. But if you're just producing it in China for later airing in Canada, you'd need NTSC (I assume you already knew that).
-DH
Similar Messages
-
Does anyone know what the default font is for MacMail?
Does anyone know what the default font is for the Mail program? My son changed my mail font and I want to change it back, but I can't remember what the original default is! Anyone? Thanks!
I rarely use Mail (normally use Gmail in Safari) so I am 99.99% sure mine is still at the default. It is Helvetica 12.
-
Does anyone know what the download size is for iOS 7.0.3?
Does anyone know what the download size is for iOS 7.0.3?
It depends on your device. For my devices it ranged from 1.1 - 1.3GB.
-
One button on the logic board of a 1st generation iMac G5 (PPC) is an alternate power button. Does anyone know what the purpose of the other button is?
I am far from certain but I believe it is the power management unit (PMU) reset switch a/k/a Cuda switch: http://support.apple.com/kb/HT1939
Do not press it when the computer is on. -
I want to know what the phone numbers are for the 2 iphones associated to itones
need to find the phone numbers for the 2 iphones associated with my itune account.
I think they are any device associated with your Apple ID that you have downloaded items from the apple or iTunes Store to. I'm sorry that I don't understand all this. My account shows that I have my iPad and 2 iPhones in use but I have had a lot of phones and I don't know which ones I used. One of them may also belong to my ex husband. Yuck
Thanks for your patience,
Rhonda
Sent from my iPad
Rhonda White -
Does anyone know what the "Provision Failure: MEDIATION-5, Lrad! errors are in WCS
Does anyone know what the "Provision Failure: MEDIATION-5, Lrad! errors are in WCS?
I get this when pushing an AP template to six new 3502i series access points. The error reads like this:
*** Apply Result for AP 'NameOfAPhere(C0:FF:EE:C0:F:EE)' ***
**AP Parameters**
Provision Failure: MEDIATION-5, Lrad!C0:FF:EE:C0:F:EE,secondaryMwar,No access
MAC address has been changes to protect the names of the innocent...
The rest of the template appears to push. The 802.11a/n and 802.11b/g/n parameters show "success".
Anyone have the magic decoder ring for what these messages are referring to so that I can go fix the issue?
Thanks in adavance!Hi,
Two things :
1- Can you refresh configs from WLC to WCS and then give it a try ?
2- Is WCS using the right read-write community string for this WLC ?
(Since we see a "No Access" message in the error)
Thanks..Salil -
I have a 13" macbook from 2009 and for some reason can no longer change my desktop image by just clicking on an image in system prererences>I-Photo. Does anyone know what the problem could be?
Your Desktop Picture settings and Dock items are stored in the files
/Users/your short user name/Library/Preferences/com.apple.desktop.plist and
/Users/your short user name/Library/Preferences/com.apple.dock.plist
in the "Preferences" folder in your user library. This looks like the system has trouble to write to these files. Check the permissions on your user library and remove the above files from your user library, then log off and on again.
Your user library is hidden in Lion and Mt. Lion. To reveal it, use the Finder's "Go" menu. Select "Go" in the Finder's main menu bar and hold down the alt/option key, until you see the "Library" in the drop-down menu. Double click it to open a Finder window, so you can browse the files inside.
Regards
Léonie -
Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks
This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.
-
Does anyone know what the black rectangle about the receiver on the 4S is for? I want to put a screen cover on my phone but don't know if that should be covered or not.
Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
Outlook 2007 doesn't show the icloud service running in Windows 7 within outlook. Does anyone know what the dll for this service is so it can be manually added to outlook? I've installed the icloud control panel app and set it up to synch everything, but after initially downloading my icloud calendar, it won't process any calendar updates (new entries made on either iphone 4 on ios 5 or outlook).
So since the control panel installed, but the service doesn't show running in outlooks "trust center" add-ins list, anyone know the actual dll file it would point to so I can see if I can add it the hard way?I had the same issue and figured it out. First you have to start Outook as administrator. To do this, shift and right-click on outlook and click run as administrator. Next you need to enable Hard-disabled add-ins:
Hard-Disabled Add-Ins
Hard disabling can occur when an add-in causes the application to close unexpectedly. It might also occur on your development computer if you stop the debugger while the Startup event handler in your add-in is executing.
To re-enable an add-in
In the application, click the File tab.
Click the ApplicationName Options button.
In the categories pane, click Add-ins.
In the details pane, verify that the add-in appears in the Disabled Application Add-ins list. The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
In the Manage box, click Disabled Items, and then click Go.
Select the add-in and click Enable.
Click Close.
Then you need to activate it.
To re-enable an add-in
In the application, click the File tab.
Click the ApplicationName Options button.
In the categories pane, click Add-ins.
In the details pane, verify that the add-in appears in the Inactive Application Add-ins list. The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
In the Manage box, click COM Add-ins, and then click Go.
In the COM Add-Ins dialog box, select the check box next to the disabled add-in.
Click OK. -
Does anyone know what the model # is of the current MacBook Pro 15in, 2.3 GHz , 4GB memory, 500 MG HD? Is it MD103LL/A? My MacBook Pro (3 yrs old) was stolen and my ins co found this model at Best Buy for $1799. Want to know if they're same, specs? Thank you!
Yes, it is in the United States and Canada. In other countries, the LL will be something else.
(69778) -
Does anyone know what the situation is for Israel? Does this mean that there is NO content whatsoever?
I googled
"Unable to find file floatui.htm in the Configuration/Floaters directory"
and posted the first Adobe forums link which popped up.
You can often find answers to obscure issues if you google a few keywords from an obscure error message. -
I have a first generation iPad and the screen went completely green on me and locked up. I was able to unlock it, but now there's a green haze all over the screen. Anyone know what the issue could be and how I can get it fixed?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Cheers, Tom -
Just downloaded new verion of ITunes, now when I try to open ITunes get This copy is corrupted or is not installed correctly. Please reinstall ITunes. Running XP. I do not want to lose everything I already have on ITunes.Does anyone know what the solution might be?
Hi, oldcrow13.
Thank you for the response. Typically this error is caused by installing an older verison of iTunes than you had prior. When you installed iTunes did you download the program directly from iTunes.com, or did you use an older copy of the program on your computer? If you used an older version or are unsure, uninstall all the components one more time and download a new copy of iTunes via the link below.
iTunes for Windows
http://www.apple.com/itunes/?cid=OAS-US-DOMAINS-itunes.com
Jason H. -
Iphone6 doesn't play music (have tried obvious things like volume etc and plugged in headphones, connected to a speaker via bluetooth, and tried to play from the inbuilt speaker). Does anyone know what the problem is and how it can be resolved?
You can't buy the part from Creative as a spare.
I'm not sure how compatible other parts might be, but that would be a question for someone who really knows a lot about this area of electronics.
The Creative repair for this is likely to be expensi've, but the problem is most likely a broken solder connection than an actual new headphone socket. So if you know someone experienced in surface mount soldering you could probably get it repaired just with this.
Maybe you are looking for
-
I have two iPhones on my apple account and need to remove one how do I do this? Thanks
I have two iPhones on my apple account and need to remove one how do I do this? Thanks
-
Running a java application from different directory
I have the file in my c:/Folder/Program.java I want to compile and run it from D:/ (drive)i.e from different directory. Thanks in advance, Praveen.
-
What happened to photos file that used to show in Mountain Lion finder window?
Mountain Lion and earlier OS X systems used to have a Pictures (maybe it was Photos?) "folder" in the side menu of Finder windows. I recently upgraded to Mavericks and don't remember whether I saw it there or not (I didn't use it a lot, but it was ve
-
I have created a smart album with a date range and 'photo is flagged' and I would like to sequence them manually. The doucmentation I can find says you can open a smart alblum and drag/drop... not me. Can you help? Also.. if I figure this out and Sha
-
In which tables can I find the sd texts in the material register?
Hi, In which tables can I find the sd texts in the material register? Thanks.