Anyone know what the software update does?
Just noticed that there is a software updated available from Motorola, unfortunately only for Windows machines, but I'll be able to get it done.
Has anyone installed this yet? Does anyone know what it does, as the site doesn't give much detail?
Also, how do you check to see what the current version is that you are using?
Thanks.
You might have a ringing phone while you are on a call
and it will not stop ringing...
turn the phone off... and keeps ringing...
you will have to pull the battery out.
Yes the software undate is only on a PC... :MAD:
It's to fix the ringing and ringing... and Itunes update (so they say)
I have been on the phone with tech and 7 different people and total time...... 2 hour 15 minutes... and its not resolved yet
Found a friend with a PC and it would not install...phone not found as soon as you open the installers after 45 mintes of trying
This number seem to be of help
800-461-4575
Data support in Canada
Similar Messages
-
I cannot update my software because I have too much 'other' GB space. Does anyone know what the 'other' is and how do I get rid of it?
COPirateDad wrote:
I have been trying to figure out what ... is occupying over 1.4 GB of memory on my iPhone
Other is usually around 1 GB...
See Here > maclife.com/how_remove_other_data_your_iphone
More Info about ‘Other’ in this Discussion
https://discussions.apple.com/message/19958116 -
My Apple TV will not update to the latest software, dose anyone know what the problem is, I've reset, tried to do it wirelessly as well as while connected via Ethernet cable.. Both have resulted in the same message!! Update unsuccessful, current software version is 5.1 (5201) . I've rented a movie recently and does not appear in my movie list, but I have been charged for this movie, can someone help me out with these issues.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.
If when you choose restore you get a message that the device cannot be found, download the file below
Apple TV Software Restore 5.1.1 (2nd generation)
Apple TV Software Restore 5.1.1 (3rd generation)
Then hold down the option key while choosing restore and select the downloaded file when prompted. -
With the new iOS 7 update. Does anyone know what the setting "Bold Text" means or will do? Obviously I do know what Bold Text is. It says if you click on this, it says it will restart your iPhone. Before I do this, I'm just wanting to be sure I know what's going to happen.
Thanks,
-LeeIt just reboots the device and bolds the system fonts. No harm done. If you don't like it, undo the setting, it will reboot and back to as it was.
-
Outlook 2007 doesn't show the icloud service running in Windows 7 within outlook. Does anyone know what the dll for this service is so it can be manually added to outlook? I've installed the icloud control panel app and set it up to synch everything, but after initially downloading my icloud calendar, it won't process any calendar updates (new entries made on either iphone 4 on ios 5 or outlook).
So since the control panel installed, but the service doesn't show running in outlooks "trust center" add-ins list, anyone know the actual dll file it would point to so I can see if I can add it the hard way?I had the same issue and figured it out. First you have to start Outook as administrator. To do this, shift and right-click on outlook and click run as administrator. Next you need to enable Hard-disabled add-ins:
Hard-Disabled Add-Ins
Hard disabling can occur when an add-in causes the application to close unexpectedly. It might also occur on your development computer if you stop the debugger while the Startup event handler in your add-in is executing.
To re-enable an add-in
In the application, click the File tab.
Click the ApplicationName Options button.
In the categories pane, click Add-ins.
In the details pane, verify that the add-in appears in the Disabled Application Add-ins list. The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
In the Manage box, click Disabled Items, and then click Go.
Select the add-in and click Enable.
Click Close.
Then you need to activate it.
To re-enable an add-in
In the application, click the File tab.
Click the ApplicationName Options button.
In the categories pane, click Add-ins.
In the details pane, verify that the add-in appears in the Inactive Application Add-ins list. The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
In the Manage box, click COM Add-ins, and then click Go.
In the COM Add-Ins dialog box, select the check box next to the disabled add-in.
Click OK. -
My Iphone 5 does this weird thing where it just freezes, some random vertical lines show up, and shuts off. Does anyone know what the cause of this is?
Backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file, or maybe it's one of your apps causing the trouble. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.
-
Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks
This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.
-
Does anyone know what the "Provision Failure: MEDIATION-5, Lrad! errors are in WCS
Does anyone know what the "Provision Failure: MEDIATION-5, Lrad! errors are in WCS?
I get this when pushing an AP template to six new 3502i series access points. The error reads like this:
*** Apply Result for AP 'NameOfAPhere(C0:FF:EE:C0:F:EE)' ***
**AP Parameters**
Provision Failure: MEDIATION-5, Lrad!C0:FF:EE:C0:F:EE,secondaryMwar,No access
MAC address has been changes to protect the names of the innocent...
The rest of the template appears to push. The 802.11a/n and 802.11b/g/n parameters show "success".
Anyone have the magic decoder ring for what these messages are referring to so that I can go fix the issue?
Thanks in adavance!Hi,
Two things :
1- Can you refresh configs from WLC to WCS and then give it a try ?
2- Is WCS using the right read-write community string for this WLC ?
(Since we see a "No Access" message in the error)
Thanks..Salil -
On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?
Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
Franklin -
Does anyone know what the black rectangle about the receiver on the 4S is for? I want to put a screen cover on my phone but don't know if that should be covered or not.
Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
I have a 13" macbook from 2009 and for some reason can no longer change my desktop image by just clicking on an image in system prererences>I-Photo. Does anyone know what the problem could be?
Your Desktop Picture settings and Dock items are stored in the files
/Users/your short user name/Library/Preferences/com.apple.desktop.plist and
/Users/your short user name/Library/Preferences/com.apple.dock.plist
in the "Preferences" folder in your user library. This looks like the system has trouble to write to these files. Check the permissions on your user library and remove the above files from your user library, then log off and on again.
Your user library is hidden in Lion and Mt. Lion. To reveal it, use the Finder's "Go" menu. Select "Go" in the Finder's main menu bar and hold down the alt/option key, until you see the "Library" in the drop-down menu. Double click it to open a Finder window, so you can browse the files inside.
Regards
Léonie -
Just downloaded new verion of ITunes, now when I try to open ITunes get This copy is corrupted or is not installed correctly. Please reinstall ITunes. Running XP. I do not want to lose everything I already have on ITunes.Does anyone know what the solution might be?
Hi, oldcrow13.
Thank you for the response. Typically this error is caused by installing an older verison of iTunes than you had prior. When you installed iTunes did you download the program directly from iTunes.com, or did you use an older copy of the program on your computer? If you used an older version or are unsure, uninstall all the components one more time and download a new copy of iTunes via the link below.
iTunes for Windows
http://www.apple.com/itunes/?cid=OAS-US-DOMAINS-itunes.com
Jason H. -
One button on the logic board of a 1st generation iMac G5 (PPC) is an alternate power button. Does anyone know what the purpose of the other button is?
I am far from certain but I believe it is the power management unit (PMU) reset switch a/k/a Cuda switch: http://support.apple.com/kb/HT1939
Do not press it when the computer is on. -
Does anyone know what the default font is for MacMail?
Does anyone know what the default font is for the Mail program? My son changed my mail font and I want to change it back, but I can't remember what the original default is! Anyone? Thanks!
I rarely use Mail (normally use Gmail in Safari) so I am 99.99% sure mine is still at the default. It is Helvetica 12.
-
Does anyone know what the download size is for iOS 7.0.3?
Does anyone know what the download size is for iOS 7.0.3?
It depends on your device. For my devices it ranged from 1.1 - 1.3GB.
Maybe you are looking for
-
Report for pending of invoice parking
Dear all, Is there any standard report in SAP to see only the GR completed, but not any invoices done (either parked or posted). Immediate reply will be appreciated. Thanks Prasant sekhar
-
How to use a VHD file in VMWare
I have received a backup of the VMware files that is a vhd file. is there a way I can import these into VMware so I can view and use the files contained within the vhd file. I am running VMware XP mode in Windows 7. Please help.
-
Re execute query with out using a time
Hi I want to refresh data in many based tables blocks automaticly with out using a timer, lest say ever 2 m refresh the data, is there is any soluation for that best regards
-
How to Transport Workflow Development to another client in the same system
Hi , I have created a Workflow in DEV 010 Client. But I have all the test data in DEV 020 Client. Please let me know how to transport this workflow development from DEV 010 to DEV 020. Immediate response will be highly appreciated. Thank you, Best Re
-
Hi all , we have EP 7 sp9. Can I configure the UWL to hide the preview section part in UWL ? Current there is one list in UWL, and when choose one item, it will display the content in below preview section. Can we hide the below preview section ?