Anyone Know what this apple hardware test error means?

Hi I've been experiencing some problems with my mac it gets to hot fans nerver go up not even with smc fan control installed and some times it freezes so i decided to run the apple hardware test that comes with the machine and during the memory part it showed me this error code
4MOT/1/40000003:HDD
Does any one know what this means or have any idea with what part of the machine it can be related to
Thanks hope sombody answers

If I had a hardware error detected by Apple Hardware Test (which in my experience misses the minor things) then I would be raising a case with AppleCare right away. 
http://www.apple.com/support/contact/phone_contacts.html
You shouldn't have to deal with hardware failures on a Mac this young.
mrtotes

Similar Messages

  • What do Apple Hardware Test Error Codes indicate?

    I recently installed new 1GB memory modules in both slots. When running the Apple Hardware Test, I got the following error code:
    post/0/2048 S0DIMM0/J20STANDARD
    Does anybody knows what this means? Up in the Test Results Box, it said Memory passed.
    Do I have a problem or not?

    I've had little luck finding a compilation of those AHT codes and their meaning. In your case, "post" is probably "power-on self test," the routine that all Macs run at startup to check for problems.
    2048 is the total RAM qty in MB.
    J20STANDARD is the logical name of one of the RAM slots.
    Run System Profiler and see what it shows for when you select "Memory" from the left-hand pane. On my 1Ghz 17" PowerBook, Profiler shows one slot as J20STANDARD and the other as J23REVERSED and it runs fine. Profiler will tell you if the modules are matched for speed and CAS latency.

  • What does Apple Hardware Test error code 4MEM/1/40000000:OX3bb6b190 mean?

    Mozilla kept crashing so I did the Apple Hardware Test and got error code 4MEM/1/40000000:OX3bb6b190. I reinstalled MacOs 10.4.4 (after saving the important stuff to disk of course) and it took about 10 tries to get the 2 disks installed. After the installation, I tried to update to 10.4.5, and when I restarted, the screen was blank. The only disk the computer will start with now is the No. 1 installation disk. What can I do?

    Hi
    A MEM error code generally indicates a faulty RAM Module. In my experience most RAM manufacturers offer at least a 5 year warranty of their RAM products. Some warranties are for 10 years. Sometimes reseating (taking it out and putting it back in again - properly) the Module will 'cure' the problem. Run AHT afterwards if you try this option first.
    If you can remove the offending module and still have enough RAM to be able to do what you need to do then do so.
    If not take it to your nearest Apple Repair Specialist who should fix it for you or replace the faulty module yourself and deal with the RAM manufacturer directly.
    Judging by the footer to your post you don't seem to have had much luck with this model have you?
    Tony

  • Does anyone know what this Repair Disk Permissions stuff means?

    Safari hung on me today, so i decided to repair disk permissions. This text keeps coming up. Is my computer gonna explode or something? Thanks in advance for any help...my OS is 10.6.7
    Repairing permissions for “Macintosh HD”
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar".
    User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib", should be 0, user is 95.
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist".
    User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries", should be 0, user is 95.
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries".
    Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Home/lib/security/cacerts", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Home/lib/security/cacerts".
    Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Resources/Java/deploy.jar".
    Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar".
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib", should be 95, user is 0.
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist".
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries", should be 95, user is 0.
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle", should be drwxr-xr-x , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Home/lib/security/cacerts", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Home/lib/security/cacerts".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/deploy.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/libdeploy.jnilib".
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    Permissions repair complete

    Pleasant dreams.
    Please note the items listed under Legend in the right sidebar of this page.

  • I ran hardware test and error 4MOT/1/40000003: HDD-1322 came up. Anyone know what this is?

    I ran hardware test and error 4MOT/1/40000003: HDD-1322 came up. Anyone know what this is?

    Hi guys,
    I have a similar problem, the numbers at the end of the error code change a bit, when i do the apple hardware test again ( I have an imac of early 2008, 2,66 GH). I have  2 GB Ram now, after one week ago one of the 2GB-Ram sticks "died") In fact, it was working quite much, then suddenly (i bought imac in june 2009) the ram stick was broken. The apple-support center told me its probably not a problem, but did not tell me what the error code means.  I have apple-care for 3 years, its a luck i did it, so they will take it and check carefully, but just after i insisted on the error. It seems they do not want to tell u what that could be....
    Do u guys think the ram-stick was broken because the imac was too hot???

  • I ran a apple test and got a error code 4mot/1/40000003:hdd-1376 does anyone know what this is thanks

    I ran a apple test and got a error code 4mot/1/40000003:hdd-1376 does anyone know what this is thanks

    Buy a new drive and replace the old one. While the old one is still working (if it is) I would quickly make a bootable backup to an external drive if you have one, assuming you have no extant backup.
    Clone using Restore Option of Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    You will find suitable replacement drives at OWC.
    They may also have a video tutorial. Or you may find a written tutorial at ifixit.com. Also may find one by Googling for it.

  • Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro.

    Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro

    The motor on the exhaust fan has failed or is failing.

  • Mac Mini Late 2012, does anyone know what this error message means, 4mem/9/40000000:0x7a5c8f90

    Mac Mini Late 2012, does anyone know what this error message means, 4mem/9/40000000:0x7a5c8f90

    What was the Mac ding when you received that error?
    Were you running Apple Hardware Test?
    http://www.macissues.com/2014/03/21/how-to-run-and-interpret-apples-hardware-tes ts-on-your-mac/
    Seems like a memory error.

  • What are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?

    what are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?

    Thanks - Even though I'm years out of warranty I got chat help from Apple (I said they should help me since the codes aren't published.)  We covered three different questions, and although I didn't get a specific decoding of the error code, I got confirmation of what other comments here imply - it might have helped that I indicated I'd already been here - and useful links to how to do back ups, including to CD(s). (I don't have a lot of data on this computer yet)
    Now I need to figure out how to decide how hot-to-the-touch is "too hot" for the metal frame at the top of the iMac to decide whether I'm getting adequate fan performance or insufficient.  While chatting I initially reported it was cool at the bottom and warm at the top.  Apple hadn't asked, but their response prompted me to feel it again, and I'd say the top was hot, not warm - I updated but Apple didn't comment further except to conclude after addressing the other questions that I should take it in for further assessment - don't really want to bother with that.

  • Does anyone know what this error code means?My itunes will not open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll."

    Does anyone know what this error code means?My itunes will not even open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll." Please let me know if your know anything! It is greatly apprecitated!

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more.  Itunes starts but before anything loads a

  • TS4291 I can't send mail from my iPad apps, I just get the error message, 'The recipient- was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • TS3694 trying to restore my phone and error occurs with 1015 in the message anyone know what this is?

    bought a second hand iphone that worked fine untill i tried to restore to factory settings and put a simcard in. now tring to restore the software, but everytime it comes up with an error message half way through with the code 1015 on the end. anyone knows what this means??

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    Has the firmware been modified before you updated the iOS? If yes, this error could be a result of a jailbreak.

  • I received error code (-50) when trying to restore my iPad. Does anyone know what this error code means?

    I received error code (-50) when restoring my iPad2. Does anyone know what this error code means and how to fix it?

    See the  More Like This  Section on the right...

  • Every time I launch iTunes I get message "We could not complete your iTunes Store request. An unknown error occurred (4002)." Anyone know what this is?

    Hi everyone. Every time I launch iTunes I get a message "We could not complete your iTunes Store request. An unknown error occurred (4002)." Anyone know what this is or what I need to do to stop it? Any suggestions much appreciated.
    Geoffrey

    Re: An unknown error occurred (4002).
    This might solve your problem....

  • TS2776 I used my Ipod while at the gym one day and now it's acting wacky.  I have tunes that will not download due to an "unexpected error (-50).  Anyone know what this is and how to fix it?

    I used my Ipod while at the gym one day and now it's acting wacky.  I have tunes that will not download due to an "unexpected error (-50).  Anyone know what this is and how to fix it?

    looks like the gtk theme is not the problem. didnt really think it was, but the documentation was worth posting. the guys over at ubuntu look as though they have dealt with this in great detail, and have produced a few solutions, which may or may not work. i have decided to post these for anyone else who may have these problems.
    Solution 1 - new user creation:
    https://bugs.launchpad.net/ubuntu/+bug/104521
    Solution 2 - config file delete:
    http://ge.ubuntuforums.com/showthread.php?t=724439
    post number 6 here features the config file delete solution, as well as a link to another post which may be useful.
    judging by a google search on this problem and the number of responses that came up, the bonobo/daemon error is quite a common curse for the users of gnome, although much more common in distros such as ubuntu or fedora.
    i hope that this proves useful and if anyone has anything to add, please feel free. the more documentation the better.
    EDIT:
    another solution would be to remove gnome and reinstall it from scratch. (some please tell me if i am doing this correctly. thanks )
    1. clean your catch:
    pacman -Scc
    2. remove gnome, gnome extras, and whatever other gnome files you might have installed
    pacman -Rscn gnome gnome-extra etc...
    3. reinstall gnome and gnome extras
    pacman -Sy gnome gnome-extra
    4. reconfigure your desktop the way you want.
    Last edited by czechman86 (2008-05-28 23:42:43)

Maybe you are looking for