Anyone know what this device is? Guitar - Computer
If you go to http://www.apple.com/ilife/garageband/
and watch the main video (left hand side) at 1:02 you see a device that is used to plug the guitar into the computer. Anyone know what this specific device is?
Also does anyone have any experience with this device?
http://store.apple.com/us/product/TB084LL/A?mco=MTY3ODQ5OTY
Thanks!
Message was edited by: BrentApple
BrentApple wrote:
Anyone know what this specific device is?
it is this
Also does anyone have any experience with this device?
M-Audio is a respected company, and we've had more than a few users of the FastTrack pass through here.
Similar Messages
-
Does anyone know how to permanently remove a device that is trying to pair with my computer? I don't know what this device is or where it came from. I just want it gone. This is the name of the device ArbAx6h2P6.
If it's a bluetooth device:
Bluetooth: How to delete a paired device:
http://support.apple.com/kb/ta27116 -
I tried to start my computer and just have a white screen. Does anyone know what this might be?
I tried to start my computer and just have a white screen. Does anyone know what this might be?
Not good news. But you will need to be more descriptive. What version of OS X are you running? Did you do anything different prior to turning it off the time before this happened? Is their an Apple logo on the screen? Is there a spinning gear below the logo? What version of OS X was installed when the computer was new?
-
For some reason my iPod will not sync with my computer. It comes up with an error code 13019. Does anyone know what this code means or how I could find out?
Sorry for the typos, I hope my message still gets across!
-
The drop down view by menu (Song, album, etc) at the right side of the iTunes window is like a ghost. It flashes into view for a millisecond once in awhile but never lets me click on it. Anyone know what this is about and what to do?
Short answer:
Click Hide Song(s), it is what you wanted to do...
Long answer:
iTunes in the Cloud is a feature of your iTunes store account that allows you to redownload or stream your past purchases. When you delete a purchased track that is downloaded to your computer (like the first one shown here) you are asked if you also want to hide the song from iCloud. This would remove it from the computer and also stop it showing up with the iCloud symbol as the other tracks from that album (which are not downloaded) do.
If a track shows with the cloud symbol you can play (stream) it by double-clicking the title, or click the cloud symbol to download a local copy to your library. If you try to delete one of these tracks you get a slightly different message confirming that you want to hide the track. Clicking hide will remove the listing from the library and any other device that shows your past purchases.
Should you want to retrieve any item hidden in this way at a later date use Store > View My Account > iTunes in the Cloud > Hidden Purchases > Manage.
To hide all your previous purchases that are not downloaded to your computer use Edit > Preferences > Store and untick Show iTunes in the Cloud purchases.
tt2 -
I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
bought a second hand iphone that worked fine untill i tried to restore to factory settings and put a simcard in. now tring to restore the software, but everytime it comes up with an error message half way through with the code 1015 on the end. anyone knows what this means??
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
Has the firmware been modified before you updated the iOS? If yes, this error could be a result of a jailbreak. -
Hello,
I tried to download updates on my IPhone 4 and a message box appeared saying--after it downloaded the updates on my computer--that my firmware file is not compatible. Does anyone know what this means?
Thank youOnly the individual that set the restrictions passcode knows what it is.
If you do not know it or have forgotten it, put the device in DFU mode (google it) and restore as new. -
Does anyone know what this error code means?My itunes will not even open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll." Please let me know if your know anything! It is greatly apprecitated!
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a -
I am getting the above message on many of the websites that I use, including YouTube, Soundcloud and others.
It seems like a virus. I can't access the sites at all - not using Google Chrome or Safari. Anyone know what this isand how to get rid of it?
ThanksUsing the "Network" preference pane in "System Preferecnes", choose your connection type (ie, Wi-Fi, Ethernet) and then click the "Advanced" button. One of the tabs in the drop-down pane that appears is labelled "DNS". Choose it to see the DNS settings in use by your computer.
If the address of the DNS server(s) listed are of the form 208.67.222.222 or 208.67.220.220 then you are using OpenDNS. If using the DNS provided by your router, then it will be of the form 192.168.1.1 or 10.0.1.1, or similar.
Checking your router's setting depends on the router model.
Note that the way OpenDNS parental controls work, someone has to have an account with OpenDNS (not just be using their public DNS servers), and that account is associated with a specific IP Address. For you to be getting that message means that you have a) made a DNS request for a site using OpenDNS and b) you have made it from an IP Address that is associated with an OpenDNS account with parental controls turned on. That's the sort of thing which is highly unlikely to happen by accident (but not impossible)...how do you access the Internet? -
I have a 21" iMac that only boots as far as a folder icon with a question mark in it. Anyone know what this means and how to fix it?
It usually means your OS has corrupted files. You need to reinstall OS X.
If you are using Snow Leopard:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
If you are using Lion:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button. -
I can't get my project to share. A pop up screen comes up saying, "This item can't be shared while it is still referencing media on the camera". Does anyone know what this means. I'm confused because I don't have a camera hooked up to my computer.
may you have directly imported clip to timeline without copying it to local drive..
update project for links and check if missing clips are there..
reconnect it if you have it on local drive.. -
I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?
iOS devices do not have the BT profiles that support file sharing and othr general functions. See:
iOS: Supported Bluetooth profiles
Basically it support headphones, keyboards, speakers, peer-to-peer gaming -
Anyone know what this means? warning.cpu.alert.b5 it came through skype
Anyone know what this means? warning.cpu.alert.b5
It came as a skype call........very strange. I can't find anything on google searchAnyone else questioning this? the info from Skye is:
Do not repond to the call or go to any suggested website.
"This link or website may be "phishing" sites, where it will ask for personal information which they will be using in their personal interest. Furthermore, this link may also contain viruses that could damage your computer. "
Hope this helps others out there......... -
Anyone knows what this lockscreen means?
I got this very strange lockscreen. I could not log on anymore. Does anyone knows what this is?
Hello there, Roloef.
The following Knowledge Base article provides some great, practical steps for troubleshooting an unresponsive iPad touchscreen:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
The best place to start would be with these initial steps:
If your device is experiencing any of the symptoms listed above, try the following steps:
Restart your device
Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
Clean the screen with a soft, slightly damp, lint-free cloth.
Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see theService FAQ for your product.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Maybe you are looking for
-
Multiple tables in a recordset.
Hi all, I have got a bit stuck with creating an advanced recordset that calls from multiple sub tables. I have created the SQL statement below (originally used inner joins but the code got too long and still didn't work). SELECT * FROM Main_Table, Ta
-
My video sound does not work when added to a pdf
I just bought adobe acrobat pro and when I insert a video it plays but with no sound. I have tried several different videos (quicktime) and they all do the same thing. I am working on a mac
-
HT1349 Hi. How do you reset your i pod touch password after you forgot it
Hi. I have forgotten my password for my i pod touch and was wondering how to unlock it.
-
hi, i just bought an ipad.my problems is the privious owner dont reset the apple id.i just reset the ipad.now i cant active the ipad with my apple id.what can i do?
-
Successful Archiving of MM_EKKO
Hi Experts: We have started to Archve MM_EKKO. We are deleting large amounts of PO Data. We had written about 80,000 PO's. We tried running the MM_EKKO delete program but it would short dump because of too much data. SAP suggested making the fi