Anyone Logic-user, who use Virtual Guitarist or Basist, by Steinberg

Hi, I bought Steinbergs Virtual Guitarist 2 and Virtual Basist.
I use Logic Pro 7.0.1 and OS X 10.3.9 in my iMac G5 (2 Gb RAM).
First everything was good and then I didn't find VG2 from my AU-instruments.
The basist was there.
I run the AU-manager, and it was OK for a while and then I lost it again.
In the Steinbergs Virtual Guitarist 2, Operation Manual they tell System reguirements OS X 10.3.9, but on Steinbergs web-sites they say OS X 10.4.
I have a recording studio. I 'm in a hurry, but VG2 doesn't function.
Is there anyone who use Virtual Guitarist 2 or Virtual Basist.
If there is, please tell me about your experiences or OS-versions.

Hi.
Sorry for the delay in replying to your post below. I have all of the apps that you're speaking of - including the acoustic version of virtual guitar. I do not have the latest version of VGEE, although I do have an earlier one.
They are running fine, with the following exceptions:
1. The VGEE is not recognized as a compatible plug-in using Logic's AU Manager. Not to worry though, simply try to validate the progam using AU Manager and then, when it fails, exit the manager. The program should then appear in your plug-in list underneath a separate invalid sub-listing.
2. If you can get the plug-in to load correctly, and you cannot load any samples/patterns, you may need to redirect the plug-in to the correct folder for the samples. There is a small app available on steinberg/yamaha's web site for this...although I've not seen it/used it for some time.
Good luck,
David

Similar Messages

[HELP] How to records user who use SQLPlus or SQL editor?

Dear Gurus,
Is onyone know how to record user who use SQLplus or any SQL editor?
for instance...
user1 using SQLplus on monday august 9.30.21 PM...and I have table which record this for audit user.
Or..
Can I block user who connect to oracle using SQLPlus?
If anyone know how to do this..please inform me...
Thanks and Regards
Erie

You can enable Auditing (AUDIT_TRAIL) and audit at the Session Level to record Logon and Log off of a required user. This can be enabled to be recorded in the audit table or operation system file. You can also audit user statements etc.
For example, to enable auditing connect for user UGONIC
SQL>audit connect by UGONIC;
TO disable it
SQL>noaudit connect by UGONIC;
Check in the SQL Reference for the AUDIT statement and requirements.
If you do not want the user to connect at all via SQL*Plus, you can use PRODUCT_USER_PROFILE to disable a users access to SQL*Plus or at the lower level, disable specified SQL*Plus and SQL commands for the user. You need to run the PUPBLD.SQL script as system user (if not run yet) and add records to it as required.
Example: After running PUPBLD.SQL. This entry stops the user UGONIC from using the drop command at the backend in SQL*Plus.
INSERT into product_user_profile (product,userid,attribute,char_value,date_value)
values('SQL*Plus','UGONIC','DROP','DISABLED',NULL);
Note that if a user is already connected by the profile entry, it is not activated on that session, but on subsequent logons. Again read the requied security documentations for this.
For both auditing, you need to set the required database intialisation parameters and know where to get the audit records (in tables, views or OS file). For instance, when using tables, you maintain and query tables like audit$ to view the logs. When using OS type logging, it is recorded on the path specified in the AUDIT_FILE_DEST init parameter (In Windows, it is logged in the Windows Event and you can view it from the event viewer).

How to find out the Transactions used per month & the USER who used that

Hi,
1)How to find out the Transactions used per month & the USER who used that?
2)and can i get the above same for minimum 20 month?
System : SAP- Enterprise Core Component.

You can use my program...
*& Report Z_ABAP_TCODE_MONITOR
*****& Program Type          : Report                                 *
*****& Title                 : Z_ABAP_TCODE_MONITOR                   *
*****& Transaction code      : ZTCODE_USAGE                           *
*****& Developer name        : Shailendra Kolakaluri                  *
*****& Deveopment start date : 26 th Dec 2011                         *
*****& Development Package   : ZDEV                                   *
*****& Transport No          : DEVK906086                                       *
*****& Program Description   : This program is to display
*List all tcodes executed during previous day.
*& Show the number of users executing tcodes
*& Modification history
REPORT Z_ABAP_TCODE_MONITOR.
*& List all tcodes executed during previous day.
*& Show the number of users executing tcodes
TYPE-POOLS : slis.
DATA: ind TYPE i,
      fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      layout TYPE slis_layout_alv,
      variant TYPE disvariant,
      events TYPE slis_t_event WITH HEADER LINE,
      heading TYPE slis_t_listheader WITH HEADER LINE.
*REPORT z_report_usage.
TYPES: BEGIN OF zusertcode,
date   TYPE swncdatum,
user   TYPE swncuname,
mandt     TYPE swncmandt,
tcode     TYPE swnctcode,
report TYPE swncreportname,
count     TYPE swncshcnt,
END OF zusertcode.
*data   : date type n.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
      wa_usertcode TYPE swncaggusertcode,
      wa           TYPE zusertcode,
      t_ut         TYPE STANDARD TABLE OF zusertcode,
      wa_result    TYPE zusertcode,
      t_result     TYPE STANDARD TABLE OF zusertcode.
PARAMETER: month TYPE dats DEFAULT sy-datum.
*PARAMETER: date TYPE dats.
*select-options : username for wa_usertcode-account.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_fieldcatalog.
PERFORM set_layout.
PERFORM get_event.
PERFORM get_comment.
PERFORM display_data.
FORM get_data .
*date = sy-datum - 2 .
After start-of-selection add this line (parameter Month required 01 as day).
concatenate month+0(6) '01' into month.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
    EXPORTING
      component     = 'TOTAL'
      ASSIGNDSYS    = 'DEV'
      periodtype    = 'M'
      periodstrt    = month
    TABLES
      usertcode     = t_usertcode
    EXCEPTIONS
      no_data_found = 1
      OTHERS        = 2.
wa-date = month.
*wa-date = date.
wa-mandt = sy-mandt.
wa_usertcode-account = username.
LOOP AT t_usertcode INTO wa_usertcode.
    wa-user = wa_usertcode-account.
    IF wa_usertcode-entry_id+72 = 'T'.
      wa-tcode = wa_usertcode-entry_id.
      wa-report = space.
    ELSE.
      wa-tcode = space.
      wa-report = wa_usertcode-entry_id.
    ENDIF.
    COLLECT wa INTO t_ut.
ENDLOOP.
SORT t_ut BY report ASCENDING.
CLEAR: wa, wa_result.
endform.
FORM get_fieldcatalog .
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'DATE'.
fcat-seltext_l   = 'Date'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'MANDT'.
fcat-seltext_l   = 'Client'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'USER'.
fcat-seltext_l   = 'User Name'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'TCODE'.
fcat-seltext_l   = 'Transaction Code'.
fcat-key         = 'X'.
APPEND fcat.
ENDFORM.
*&      Form SET_LAYOUT
      text
--> p1        text
<-- p2        text
FORM set_layout .
layout-colwidth_optimize = 'X'.
ENDFORM.                    " SET_LAYOUT
*&      Form GET_EVENT
      text
--> p1        text
<-- p2        text
*FORM get_event .
events-name = slis_ev_top_of_page.
events-form = 'TOP_OF_PAGE'.
APPEND events.
*ENDFORM.                    " GET_EVENT
**&      Form GET_COMMENT
      text
--> p1        text
<-- p2        text
*FORM get_comment .
DATA: text(30).
text = 'Billing Report'.
heading-typ = 'H'.
heading-info = text.
APPEND heading.
*ENDFORM.                    " GET_COMMENT
**&      Form top_of_page
      text
--> p1        text
<-- p2        text
*FORM top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
   EXPORTING
     it_list_commentary       = heading[]
I_LOGO                   =
I_END_OF_LIST_GRID       =
*ENDFORM.                    " top_of_page
*&      Form DISPLAY_DATA
      text
--> p1        text
<-- p2        text
FORM display_data .
sort t_ut[].
DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = sy-cprog
      is_layout          = layout
      it_fieldcat        = fcat[]
      i_save             = 'A'
      is_variant         = variant
      it_events          = events[]
    TABLES
      t_outtab           = t_ut
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " DISPLAY_DATA

Can't Use Video with other Mac users who use AIM

I know that ichat is compatible for video chats with other pc users who use aim, but does it work with other mac users who use aim?
Everytime I try to chat with my friend, I get an error message when trying to start of a video chat.
BTW, I use a iMac G5 with an isight camera.

Hi Staci,
For a Bit of Clarity.
AOL have their Instant Message App. referred to as AIM.
Apple decided and did a deal with AOL that iChat could join their service Buddy Lists.
On these Discussions we tend to refer iChat as Logging into AIM, as they are the servers that the Buddy Lists are held on.
As iChat can also use Bonjour and Jabber, both of which have their own Buddy list window on your Mac. The Jabber side needs you to have a Jabber screen name - so again people differentiate between this and the AIM side.
I would guess you friend is trying to make it clear that she is using the AIM side of iChat as opposed to the Jabber side.
As has been said already, the Application side of things also tend to get referred to generically as "AIM" as well.
The Mac version has stopped and 4.7 and will only Text chat.
The PC side needs 5.9 to clearly Video or Audio chat with a Mac using iChat. (AIM 6.0 is not stable enough to A/V chat to iChat).
1:13 PM Saturday; January 27, 2007

How to edit contacts in Unified Contact Store in outlook or owa for users who use Attendand Console?

Hi all,
We have Lync server 2013 with Exchange server 2013 and "Unified Contact Store" configured and working. unfortunately our reception staff who use the Attendant Console are unable to edit their contact list (this is normal as 2010 clients do not
support UCS).
According to Microsoft notes that I have read we should be able to edit the UCS contact lists in OWA, Outlook, or Lync 2013. I can get reception staff who normally use Attendant Console (AC) log in to Lync 2013, arrange their contacts then go back to AC
- this works fine.
However as reception staff already have outlook, I would like to enable these users to be able to edit their contact lists in outlook or OWA. Does anyone know how to do this? I can't find any contact list in outlook that relates to the contact lists
in Lync.
Simon.

Hi,
For deploying Unified Contact Store, the users must log in with Lync 2013 at least once.
More details:
http://technet.microsoft.com/en-us/library/jj204963.aspx
Kent Huang
TechNet Community Support

List of users who used particular tcode

Dear All,
Plz help me in this issue, I want the list of all the users who had accessed particular t_code in last three months, i had checked in suim, usr tables and in su01, i just want the screen where i can select t_code and the date to access the user names who had used that t_code in these days, thanks in advance.

Hi,
From my knowledge there is no standard screen answering your requirement.
You can get dig out this information from ST03, but it is by month and it will give all transactions.
If you really need it, it 's up to you to fire SE38 and write your own abap report !
Regards,
Olivier

Logic does not recognize virtual guitarist vst plug in

The Virtual guitarist program instruction manual is very vague and I have no Idea where to put the downloaded folders so that logic will recognize them when I upload the program.

Thanks for responding, I have the VST wrap installed and it works fine with other virtual instruments but for some odd reason I can't get the Virtual Guitarist to appear on my instrument selection in Logic

How to find out the list of users who used Discoverer

Dear All,
We have Oracle E-Business Suite 11.5.10.2 with Disco. 4i.
We need to know how we can find out the Employee ID, Responsibility, Org... who used discoverer during a specific period in the past ? For example the last year.
Any help plz.
Regards,
Mohammad Muhtadi

I'm not sure You can get the responsibilities or the org that was used in that specific run but as for getting when it was run and by whom...
Try that SQL:
select distinct
qs.qs_doc_name workbook,
--qs.qs_doc_details worksheet,
case when instr(qs.qs_doc_owner,'#')=1 then substr(qs.qs_doc_owner,2,10) else qs.qs_doc_owner end workbook_owner,
qs.qs_created_date run_date,
case when instr(qs.qs_created_by,'#')=1 then substr(qs.qs_created_by,2,10) else qs.qs_created_by end apps_user_id,
fu.user_name apps_user_name,
ppf.FULL_NAME user_full_name,
ppf.EMPLOYEE_NUMBER user_employee_number
from
eul_us.eul4_qpp_stats qs,
fnd_user fu,
per_people_f ppf
where to_number(substr(qs.qs_created_by,2,10))=fu.user_id(+)
and fu.employee_id=ppf.PERSON_ID
and sysdate between ppf.EFFECTIVE_START_DATE and ppf.EFFECTIVE_END_DATE
change the "eul_us" to the discoverer schema.
Basically the primary data you are looking for lies in the qpp_stats table...

Can users who use CS6 install a copy at home at no extra cost?

Hi, I have found this link and just wanted clarification if it was possible and how it knows when the other copy is being used?
Also if someone leaves and took advantage of this can I de-register the licence online?
Thanks
http://www.adobe.com/support/service/workathome.html

You have 2 activations and that answers all your questions. You can use it on 2 systems, as long as it isn't at the same time and since activation is mandatory, Adobe knows on what systems they are.
Mylenium

Where is the best place to connect with Apple users who experience a disability?

I would like to have discussions with Apple users who use the accessibility features..

http://niederfamily.blogspot.com/2012/06/silencing-of-maya.html
Proloquo2go is also popular. I'm sure the individual app developers would be happy to accept your feedback.
There are braille typewriters and print-readers, there are mounts for ipads, there is voiceover, and assistive touch for those that have trouble swiping or using the home and sleep/wake buttons.
--Sam
P.S Apple can also be reached at www.apple.com/feedback

Wine Project looking for Photoshop CS users who want Linux support

If you're not a Linux user, or if you don't like the idea of
running Photoshop for Windows on Linux, you can stop reading now,
this message probably won't be interesting to you.
The Wine project is looking for hardcore Photoshop CS or 7
users who use Photoshop professionally, all day, every day,
and who are willing to tell us why they can't do that in Linux
using Wine yet.
We know everybody would like Photoshop CS3 or at least
CS2 support, but support for CS2 and CS3 isn't quite
ready, so we'd like to focus on our strengths, and support
Photoshop 7 and CS excellently. Don't worry, we're also
working on the CS2 and CS3 issues. Getting all the 7 and CS
issues taken care of builds a stronger foundation for CS2 and CS3.
If something doesn't work in Photoshop 7 or CS itself,
or your favorite plugin works in Windows with 7 or CS
but not in Wine, please let us know how to reproduce
the problem. To do that, just reply to this post,
or post in the wine-users mailing list,
or leave a comment in the wine appdb for Photoshop 7 or CS,
or file a bug in the Wine Bugzilla,
whichever you're more comfortable with.
We'll take it from there; if we can reproduce it, we'll
file a bug and see if we can get a wine developer to fix it.
Ideally you'd test with the latest release of Wine
(currently 0.9.51), but if you're still on a slightly older
version, don't sweat it, we'll retest on the latest for you.
Thanks!
Dan Kegel
Wine 1.0 Release Manager

Here's my original post the cnet article is based on:
http://google-opensource.blogspot.com/2008/02/google-sponsors-wine-improvements.html
Here's another post giving more details:
http://www.winehq.org/pipermail/wine-devel/2008-February/062550.html
Here's the response of Adobe's Photoshop product manager:
http://blogs.adobe.com/jnack/2008/02/wine_offers_imp.html
Here's another nice writeup:
http://arstechnica.com/news.ars/post/20080219-google-intoxicates-linux-users-with-wine-imp rovements.html
At the risk of repeating myself: I'm serious. I really want bug
reports from professional Photoshop users. Leave them here,
send them to the wine-users mailing list (see http://winehq.org),
or file one in our bug tracking system (http://bugs.winehq.org),
any of the three ways is fine.
Thanks,
Dan

How to find which users has used external scripting

I want to find out the users who used the scripting for doing any mass changes activity.

Hi Murphy;
Please check which user has which forms open? and Re: how to determine which forms are currently open?
Hope it helps you in your issue
Regard
Helios

Who uses Forte 3.5 ?

Hi,
We want to migrate to Forte 3.5. I would like to know what is your
experience using Forte 3.5 ? Please send me a brief summary about your
experience (performance, stability etc.).
Thanks in advance,
Zenon Adamek
Information Services
Senior Programmer Analyst
Purolator Courier Ltd.
Tel: 905 712-1084 ext. 3628
Fax: 905 712-6709
E-mail: zadamekpurolator.com

Hi Mark,
Thanks a lot for your email.
It will be interesting for me to know:
Who else has Forte 3.5 in production ?
Regards
Zenon
-----Original Message-----
From: Mark Carruthers [SMTP:MarkCafox.com]
Sent: Friday, April 06, 2001 1:25 PM
To: ZAdamekpurolator.com
Cc: forte-userslists.xpedior.com
Subject: Re: (forte-users) Who uses Forte 3.5 ?
Hi Zenon,
We've been using Forte 3.5 and then Forte 3.5 SP1 in development for a few
months and just started using it in production a week ago. We've had the
following issues but nothing so far that would make us go back to 3.0.M:
1) In development, the 'Save before running' option sometimes causes the
partition workshop to hang. I've raised this with Forte and it will be
fixed in 3.6. In the meantime, we don't use it and save manually.
2) We had to upgrade our Solaris 2.6 servers to Motif 2. This is
documented in Forte Tech Note 12484.
We initially had concerns that it would stop our Forte 3.0.M environments
from working because they use Motif 1. However this wasn't a problem as
Motif 2 also contains the Motif 1 libraries.
I've also read about other sites having a problem with database
connections that aren't closed correctly. We haven't seen this problem.
Regards,
Mark Carruthers
20th Century Fox
"Adamek, Zenon" <ZAdamekpurolator.com> 04/06/01 08:14AM >>>Hi,
We want to migrate to Forte 3.5. I would like to know what is your
experience using Forte 3.5 ? Please send me a brief summary about your
experience (performance, stability etc.).
Thanks in advance,
Zenon Adamek
Information Services
Senior Programmer Analyst
Purolator Courier Ltd.
Tel: 905 712-1084 ext. 3628
Fax: 905 712-6709
E-mail: zadamekpurolator.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Who Uses Google Docs?

I just purchased an iPad and am looking at using Google Docs... I also have a MacBook Pro and a Mac Pro... I am a college student and am interested in the syncing capabilities of Google Docs...
How efficient is Google Docs? Pluses? Minuses? If you use it currently, would you recommend it? If not, what do you use/recommend?

Yeah, yeah, yeah ...
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Proud GAWDS Member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"Nadia : **AdobeCommunityExpert**"
<[email protected]> wrote
in message news:e68bv0$i6g$[email protected]..
> In your own words this should probably be OT
>
> --
> Nadia
> Adobe� Community Expert : Dreamweaver
> --------------------------------------------
>
http://www.csstemplates.com.au
- CSS Templates | Free Templates
> --------------------------------------------
>
http://www.perrelink.com.au
- Web Dev
>
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
>
http://www.adobe.com/devnet/dreamweaver/css.html
> -------------------------------------------------
>
>
> "Shane H" <[email protected]> wrote
in message
> news:e67sde$1le$[email protected]..
>>I just finally just recieved my invitation code (took
a little under one
>>month) and I'm wondering for the users who use this
on their own
>>websites - are you guys placing the tracking script
on every single page?
>>
>> How well is this working for you? Do you like it?
>>
>> Just some general questions before I dive into this.
>>
>> --
>> Shane H
>> [email protected]
>>
http://www.avenuedesigners.com
>>
>> =============================================
>> Proud GAWDS Member
>>
http://www.gawds.org/showmember.php?memberid=1495
>>
>> Delivering accessible websites to all ...
>> =============================================
>>
>>
>>
>
>

Who uses Google Analytics?

I just finally just recieved my invitation code (took a
little under one
month) and I'm wondering for the users who use this on their
own websites -
are you guys placing the tracking script on every single
page?
How well is this working for you? Do you like it?
Just some general questions before I dive into this.
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Proud GAWDS Member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================

Yeah, yeah, yeah ...
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Proud GAWDS Member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"Nadia : **AdobeCommunityExpert**"
<[email protected]> wrote
in message news:e68bv0$i6g$[email protected]..
> In your own words this should probably be OT
>
> --
> Nadia
> Adobe� Community Expert : Dreamweaver
> --------------------------------------------
>
http://www.csstemplates.com.au
- CSS Templates | Free Templates
> --------------------------------------------
>
http://www.perrelink.com.au
- Web Dev
>
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
>
http://www.adobe.com/devnet/dreamweaver/css.html
> -------------------------------------------------
>
>
> "Shane H" <[email protected]> wrote
in message
> news:e67sde$1le$[email protected]..
>>I just finally just recieved my invitation code (took
a little under one
>>month) and I'm wondering for the users who use this
on their own
>>websites - are you guys placing the tracking script
on every single page?
>>
>> How well is this working for you? Do you like it?
>>
>> Just some general questions before I dive into this.
>>
>> --
>> Shane H
>> [email protected]
>>
http://www.avenuedesigners.com
>>
>> =============================================
>> Proud GAWDS Member
>>
http://www.gawds.org/showmember.php?memberid=1495
>>
>> Delivering accessible websites to all ...
>> =============================================
>>
>>
>>
>
>

Anyone Logic-user, who use Virtual Guitarist or Basist, by Steinberg

Similar Messages

Maybe you are looking for