Anyone "lose" camera raw?

Hi have elements 11. It was working just fine. I went to edit a photo and camera raw is missing. I did the update, but it's still not there.
Any help would be appreciated.

Happened to me once - I had to uninstall, run a registry cleaner, then reinstall to fix it.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Similar Messages

Update to PS CC 2014 all updated ok, opening image in camera raw if I use any sliders/panels it just freezes the raw module. Anyone with similar problem/solution?

Any solutions/fixes. Photoshop itself it's fully functional apart from the raw opening problem. I did have 8.5rc installed, raw does seem to have updated as I now have PS CC (non 2014 version) fully functional. I have already tried a new download and re install of 2014 to no avail. Also tried a download of the separate raw module, no fix either.
Win 8.1 system
Thanks in advance of any help, was trying to avoid a complete Adobe file wipe.

Ok, so this is actually a Wacom driver problem( I'm using Intuos 4). If I turn off windows ink in Wacom driver settings then my sliders in camera raw become responsive again, but I lose pressure sensitivity in PS. Just updated Wacom drivers, but no joy. Anybody have a work around/fix?

Camera Raw loses system focus and becomes inactive

While working in ACR if I hover over any of the command buttons, Save Image, Open Image, Cancel, or Done for a few seconds the "tool tip" for the button displays and as soon as I move the mouse again the whole Camera Raw windows loses system focus and becomes inactive (every tab, control, menu, etc., becomes greyed out). To regain the system focus I must move the mouse to the windows 7 taskbar and then back into Camera Raw. If the fullscreen checkbox in Camera Raw is active the only way to regain system focus is to press the Windows Key twice on the keyboard and move the mouse out of the taskbar tray. This gets pretty frustrating. Any clues?

It doesn't normally do this, I can assure you. Normally the tooltips just pop up and Camera Raw stays active.
Do you have any desktop management software installed, besides what Windows provides?
Are your video drivers up to date?
-Noel

Does anyone know when there will be Camera Raw Support in Lightroom 3 for the Olympus E-PL2?

Just bought the Olympus E-PL2, shot some test shots and came home to open my RAW files to view them and discovered that they won't open in lightroom because the .ORF files for the E-PL@ are not supported. I figured since the E-PL1 was supported this would be too.There are some minor differences between the two like base ISO, etc. I am new to RAW and notices that E-PL1 users experienced the same thing when it first came out. How long does it usually take for Adobe to get new cameras compatible with Camera Raw? The camera is very popular and I imagine people will want to use the program to process their files. Will that speed up Adobe's process? And in the mean time, does anyone have any suggestions on what program I can use to open my .ORF raw files?
Thank you in advance,
Anthony

It isn't a plug in. It is a tool that allows you to read and write to the Exif data. See the web site for how to use
Keep a copy of your original files. It doesn't cause any problems changing the camera maker name.Usually this is the only thing that has actually changed between each version of the same camera in the RAW file. However until this has been checked by ADobe and they have created a specific colour calibration it Adobe don't support the format. This does not prevent you hacking the format as long as you understand what you are doing and that you keep original copies to import once Adobe support it
If manufacturers used DNG there would be no problems, but until they do you may have to wait for up to three months for Adobe support. However Adobe do usually issue a RC of the next version of LR and ACR before the full update, that may be any time now. Certainly there is a beta version that includes support for this camera as it has been used by reviewers

CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!

CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!

Hi Kglad.
I have looked at all of my settings both in Bridge and CS6 Photoshop regarding Camera Raw. I am at a loss how to set the crop tool in cm or inches as I once did - now the only option is to crop using ratios of 1:1 etc etc - This is infuriating as lots of my square crops I could set at 10" x 10'' specifically to print one to one to fit frame and mount size -
Now if cropping using bloody aspect ratio of 1:1 (square) the actual dims of the crop are roughly 4.25 inches x 4.25 inches. this means I then have to open the whole image in photoshop in order to crop at the dims I have set! It was so much quicker in terms of batch cropping in camera raw being able to set dims in centimetres and inches but they have gone and mucked around with it, with the new bloody update! Unless you are an absolute genius and know how I can go back to having an option of CM, Inches and aspect ratio within the custom crop settings? (Please say you do)
here is the new tutorial for CC - my guess is they have scrapped the control we had over the custom crop settings
Cropping Images In Adobe Camera Raw 8

I lose changes in the details when i open my photos from camera raw 7.0 to photoshop cs5, why?

I lose changes that I made with the tools in the "Details" section, just right after I open my photos from camera raw 7.0 to photoshop cs5, why? The changes that I made with the tools in the "Basic" section remain.

First, how and why are you using Camera Raw 7.0 with CS5?
ACR 7.x requires CS6 to run.
Even if that's a typo in your post and you are running CS6 instead of CS5, no one should be running ACR 7.0, but ACR 8.4 —or at the very least 7.4.
Once any given camera model is supported by a version of ACR, it will continue to be supported in all subsequent versions of ACR. Each update to ACR has unannounced, unheralded bug fixes and improvements. Running 7.0 at this point is sheer madness.
Please clarify.
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

My Bridge update 5.2.0.4 has wrecked previews for all DNG files. They appear only sideways and small and I can't open Camera Raw in Bridge. Anyone else have the same problem?

I updated Bridge yesterday. CS6 5.2.0.4. Mac OS 10.9.5
Now all previews (DNG files) in Bridge appear sideways and only small thumbnail size.
Also Camera Raw has been disabled.
I have tried purging cache for the folders as well as purging entire cache.
I have also spent over an hour on the phone to tech support which mainly involved being switched between departments and trying to understand anyone on the phone.
Can anyone help?

Your Performance preferences screen capture reveals you have a single hard drive with little available space to accommodate both the Photoshop scratch file and the swap files of the OS.
It's obvious that Bridge finds itself at times with insufficient space to build its cache.
However, it's unclear why that should affect only DNG files and not other type of image files. Puzzling, unless the DNG files are the only large image files you have.
Parts of the following may illustrate what happens when the scratch file is on your boot drive:
The rule of thumb I follow to figure out scratch space says to figure on 50 to 100 times the size of your largest file ever multiplied by the number of files you have open. I have seen the scratch file exceed 800 GB once, an admittedly rare occurrence, but it often exceeds 200 GB when stitching large panoramas and the like.
As an example—and stressing that I'm aware that others have even more scratch space than I do—I keep two dedicated, physically separate hard drives as my primary and secondary Photoshop scratch disks and a lot of GB free on my boot drive for the OS. I also have 16 GB of RAM installed.
Additionally, if you only have a single HD, i.e. your boot drive, you'd need it to be large enough to accommodate both the swap files of the OS as well as Photoshop's scratch.

Has anyone else noticed that Adobe Camera Raw 7.x exhibits odd behavior compared to version 6.x?

I have found no discussion of this subject on Adobe's forums, so I am asking here. I find that Adobe Camera Raw 7.x's "auto" mode frequently produces overexposed images with lots of blowouts necessitating much more manual tweaking than was required with the older 6.x series of plug-ins. Has anyone else noticed this behavior?

I have found no discussion of this subject on Adobe's forums, so I am asking here. I find that Adobe Camera Raw 7.x's "auto" mode frequently produces overexposed images with lots of blowouts necessitating much more manual tweaking than was required with the older 6.x series of plug-ins. Has anyone else noticed this behavior?

Has anyone encountered this error message with Adobe Camera Raw 6.3 Plug-in?

Ever since I installed the Adobe Camera Raw 6.3 Plug-in for Elements 8 I get the following error message when I launch Editor:
"The Application or DLL C:\Program Files\Common Files\Adobe\Plug-Ins\Elements 8 \File Formats\Win 64\Camera Raw. 8 bi is not a valid Windows Image. Please check this against your installation diskette"
(As I downloaded the plug-in I don't have the option of checking against the installation diskette as the error message suggests.)
If I click OK on the error message the launch process re-commences and Editor eventually opens and operates effectively.
Does anyone have a suggestion about how I might remove this error message? Alternatively, do I run a risk by continuing to simply ignore the error message?
Thanks
Kinyo Jim

Delete the camera raw 8bi file from the File Formats folder.
Download ACR 6.2 and extract the files.
Drag the camera raw 8bi file from the download extract folder into the File formats folder.
C:\Program Files\Common Files\Adobe\Plug-Ins\Elements 8\File Formats\
If you are using a 64-bit edition of Windows, then move the plug-in file from the unzipped download folder by navigating to:
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\Elements 8\File Formats\

Help! Thumbnail + files lose Sharpening done in Camera Raw

I sharpen an image in Camera Raw... Looks great. I save it as a JPG to my ext HD. I open and thumbnail previews and file lose the sharpening I applied. Looks terrible. Reinstalled whole Design Premium. Didn't work.
Thanks for any answers!

Am I to understand you expect your thumbnail previews to be sharpened the same as your images? These things are generally at two completely different scales. Sharpening that affects a radius of 1 or 2 pixels in a 3000+ pixel image won't have much visible effect at 800 pixels.
A preview is just that - a preview. You should not expect to gauge the sharpening of the actual image by the sharpness of the preview generated. Image sharpening settings have to do with the development of the image, not the generation of the preview.
I think perhaps you're actually trying to solve a problem where you'd like to see more detailed previews on your monitor, e.g., in Filmstrip mode in Bridge, or for a slideshow. Have you tried investigating the different preview options in Bridge?
Also, something else to look at: In Bridge, choose Edit - Preferences - Advanced... Try checking the following setting, remembering to purge the cache afterward in order to cause the preview regeneration.
-Noel

Digital camera RAW Compatibility update 6.02 does not seem to update and keeps showing as an update to down;road. Can anyone help. Thanks. Tim

Digital camera RAW Compatibility update 6.02 does not seem to update and keeps showing as an update to down;road. Can anyone help. Thanks. Tim

Download it directly from Apple and apply;
Digital Camera RAW Compatibility 6.02

Epson r2400 Driver Loses Functionality after Installing Digital Camera Raw

I have four Macs at home and two printers. After installing Digital Camera RAW Compatibility Update 2.0 from software update on my Mac Pro and MacBook Pro, the Epson r2400 printer driver no longer works. I can barely get a print out of Aperture and/or Photoshop, however, Pages will output to the r2400 no problem. When I try to print with the other Mac Pro that has not been updated, I can print without issue. I can print from both machines to my kyocera mita printer within aperture and photoshop.
All of these computers are running 10.5.2. The only difference being the most recent Digital Camera RAW Compatibility Update 2.0 is installed on the two machines that no longer work with my Epson r2400.
I have uninstalled the print drivers and reinstalled. Changed the connection to the computers and tested everything that has worked in the past. I consider myself pretty good at troubleshooting, but this is beyond my grasp.
I need to print right away from all these computers, so does anyone know how to "roll back" an update? I am not running Time Machine, but that may change very, very soon. Please help...

I'm working off a 750 GB hard drive, not so simple to clone even via firewire. I guess I made a serious mistake by trusting the apple update process...I see they have a new update today. I may try that to see if fixes the problem before I buckle to the original system disk installation process. If the install is already burned, it couldn't hurt to throw some gasoline on it, right?

Does anyone know any detailed tutorials about Tone Curve of Camera Raw on the Internet?

Does anyone know any detailed tutorials about Tone Curve of Camera Raw on the Internet?
I need deeper more detailed instructions and tutorials than the official Photoshop Help.
If anyone had a useful link, please let me know. THANK YOU

A Google serach brings up a bunch, such as
http://photoshop.digitalmedianet.com/articles/viewarticle.jsp?id=354032 (with QT video)
http://www.luminous-landscape.com/videos/CR_1.shtml
http://www.google.com/search?hl=en&q=tutorials+about+Tone+Curve+of+Camera+Raw&btnG=Google+ Search&aq=f&oq=

When I try to open up camera raw it shuts down Adobe Bridge, can anyone help?

I am using mac. My problem at first was that when I tried to open a RAW image it would just shut down either photoshop cs4 or bridge cs4. Then I installed that Camera Raw 5.2 update, now I can open a raw image if I double click it from my desktop. But once I am in bridge and try to open a raw image, it loads for a few seconds and shuts down bridge. Is there a way to fix this?
Even when I when I try to change the camera raw preferences in bridge (File > camera raw preferences) that also shuts down bridge.

Go to photoshop, and check , in the Photoshop menu>about plug-ins
What version of camera raw do you see?
There should only be one camera raw plug-in installed at the default location (check the read-me or the FAQ of this forum)

Bridge wont recognizw my Nikon d610. I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in. How can I get bridge to recognize my camera? Thanks to anyone who can help!!

Bridge wont recognizw my Nikon d610. I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in. How can I get bridge to recognize my camera? Thanks!!

That camera model has been supported since ACR 8.3 and it is most certainly supported by ACR 8.6 and ACR 8.7 (beta).
Either you have damaged, corrupt image files, or a faulty Photoshop and/or ACR installation.
If there are no privacy issues, you can post one of your files to the FTP service of your choice (such as Dropbox or yousendit.com), post the link to it, and someone here can take a look at it for you.

Anyone "lose" camera raw?

Similar Messages

Maybe you are looking for