Anyone managed to run Izotope's Vinyl in Logic Pro 8?

As the topic says, anyone managed to run Izotope's Vinyl in Logic Pro 8? Despite my specs below, I'm running on an Intel MacBook ... have downloaded Universal version but it doesn't even show up in the AU manager. Any suggestions? Same lack of access in Garage Band ...

Thanks to all the people who've offered help so far...
Still no luck I'm afraid... using version 1.73, reinstalled, repaired permissions ... all to no avail!
The vinyl.component is correctly in the library/audio/plugins folder and it's definitely the universal version but STILL won't show up in the AU manager.
It's a shame because it's a great little plug-in and I'd love to get the files from my G4 PowerBook that use it into Logic 8 on the MacBook.
Thanks for your ongoing help!
Rob

Similar Messages

HT4807 anyone ever get this message? "The application Logic Pro can't be opened - 1712"

anyone ever get this message? "The application Logic Pro can't be opened - 1712"

More information please...
What OS X are you running and what is the version of Logic...

Any one having noise issue running RME Fireface UFX with Logic Pro X on OS X 10.9.1?

I can't seem to get a consistent and reliable no-noise recording. I'm running OS X 10.9.1. My Fireface UFX is updated to firmware v353 and drivers are 1.91. I'm recording into Logic Pro X. I can occasionally get a good recording but eventually all I get is noise. Once the system is in this state I can sometimes reset the core audio by disabling and enabling core audio in Logic preferences. Not sure what the issue is. I called RME state-side tech support. They suggested it was some kind of USB bus issue. So I removed everthing on the bus except for the Fireface UFX. Still no luck. I have a brand new iMac (i7 with 16GB ram non-fusion drive) and a brand new Fireface UFX. Any help would be much appreciated.

" What you're seeing via USB is power management interruptions as the Haswell chipset and Mac OS is adjusting the USB bus to cut power usage."
Sounds fair enough . I'm no so sure it is linked to Fusion drive per se.
As wrote before, I have used Fusion for year without any glitch.
But it all remains a mystery. It's not my job to fix this.
Let's hope it won't take too long before they issue 10.9.2...
I French we say : "Les convoyeurs attendent" , it's also a song

Anyone know how to change user info in logic pro 9?

Want to know if it is possible to change the user information in logic pro 9...tried all the options in preferences and nothing...any ideas? Running on lion...

Hi there
Before you begin trying to concoct an elaborate solution, perhaps you might review Jesse Warden's Captivate Player?
Click here to view his site where you may download it
However, in grabbing that link and thinking about your situation, I'm thinking that may not work because it checks off the Captivate movie when it has been selected. You want the check to appear only after a certain score has been reached.
So I'm thinking you would do this using JavaScript and a form. The form element would be the check box. The trick here (as you are probably already aware) is to pass the variable data between pages.
Thinking out loud here: I'm wondering if you would gain anything by using a Frameset?
Wishing I had a neat solution to toss out for you. Unfortunately I don't. Perhaps someone else does! Hope they share it if they do!
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How to run 32 bit plugins in Logic Pro X

Hi, everybody.
The following link is from the Macprovideo website. They have great tutorials on all things Logic and many other topics.
This article describes how to run 32 bit plugins on Logic X
Hope it helps all those who can't run their favourite 32s
http://http://www.macprovideo.com/hub/logic-pro/how-to-run-32-bit-plug-ins-in-lo gic-pro-x
Regards,
Scorpii

Hi, Q
Go to the Macprovideo site.
When you get the home page loaded, scroll down until you see a section called MPV Hub on the left side of the page. [At present it's under a series of banners for the Logic X Tutorials]
On the right hand side is a heading 1697 Articles with a blue link under saying See All.
Click the link and scroll the first MPV Hub page You'll see the article just after a review of Arturia's Spark LE
Hope this helps,
regards,
Scorpii

Anyone managed to run Leopard on an iBook G3?

I would like to know if there are people who succeeded installing Leopard on an iBook G3? I know that with the current system requirements its not done, but with some magic anything is possible.
If someone managed to install it, please share your experiences of Leopard on an iBook G3 so other people can learn from it.
Thanks in advance

Steven:
Next... I'm going to really push the limits and try installing Leopard on my Bondi Blue G3...
Wow! That's really pushing it! Let us know how it goes.
Those of us who have older hardware know that there are many users who run later Operating Systems on non-supported hardware using helper utilties like XPostFacto. There are always those who push the limits, and I expect it will be done again. For me, I see no other reason for wanting to intall Leopard at this time.
Cheers
cornelius

{{HELP}} how do you record vinyl into Logic pro 9?

Is there anyone out there?

Or... you could do something really bold and daring that only a few brave souls attempt... and that's:
Read the Manual.
http://help.apple.com/logicpro/mac/9.1.6/en/logicpro/usermanual/#chapter=2%26sec tion=0
Look at "Configuring Your Audio Hardware"

TS3938 logic pro 7 won't open and power pc applications are no longer supported appears, can anyone help?

logic pro 7 won't open and power PC applications are no longer supported appears, can anyone help?

You'll have to update Logic Pro.

Running Logic Pro 9 32bit on Mac Mini with 4GB of RAM and still crashing

Why is Logc crashing and giving me "Memory Low" errors all the time? I am running 4GB of Mem with Logic Pro 32bit. I currently have a 27 track project and it is crashing all the time. Yet the sample "Killers" project is 80+ tracks and a video and Logic has no problem, I don't get it? What am I doing that is sucking up so much memory and how do I fix it?

Morris133 wrote:
Why is Logc crashing and giving me "Memory Low" errors all the time?
Because your memory is low?
I am running 4GB of Mem with Logic Pro 32bit.
Try running Logic at 64 bit. I've noticed that even with 4 GB RAM it does make a difference with "memory low" projects.
I currently have a 27 track project and it is crashing all the time. Yet the sample "Killers" project is 80+ tracks and a video and Logic has no problem, I don't get it?
I get it. The number of tracks is not a very constant unit of measurement, it depends what kind of tracks they are, what plugins are loaded etcetera. You can have memory problems with 10+ sampler tracks, and room to spare with 100+ external MIDI tracks, to give a simple example.
What am I doing that is sucking up so much memory and how do I fix it?
How on earth would anybody but you know what you are doing?
So what are you doing?

Reason 8.1 will not ReWire slave to Logic Pro X? Anyone else experiencing this?

Hi folks,
I'm running the latest version of Logic Pro X (10.1.1) and the latest version of Reason (8.1) on a brand-new Retina iMac running Yosemite (10.10.1).
Prior to this, I was running Reason 6.5.3 and I also have a copy of Ableton Live 9.1.7. (On the same brand-new iMac, to be clear.)
Here's the problem:
Old Reason (6.5.3) would enter ReWire Slave Mode with Logic Pro X with zero issue. Same goes for Live 9.1.7. But once I upgraded to Reason 8.1, it won't do it anymore. I'm doing the obvious things:
-I open Logic first, before Reason
-I've made sure that CoreAudio and ReWire are turned on in Logic's Audio Preferences pane (I've also tried toggling both on/off)
-I've made sure that both programs are running 64-bit (although I did try running Reason in 32 as an experiment)
-I've downloaded and reinstalled the latest version of ReWire (1.7, I believe -- might be remembering that version number incorrectly)
-I've tried all of this with and without my Reason Ignition Key in a USB slot
No matter what I try, though, Reason never slaves itself.
It WILL slave itself to Ableton Live, though. So, to be clear:
-Live will slave to Logic
-Reason will slave to Live
-Reason will NOT slave to Logic
Am I overlooking something really silly here? I'd love to find an answer to this question so I can get back to my usual workflow ASAP!
Thanks very much for your help. I really appreciate it.
Cheers,
Adam

Hey Adam,
I am also having rewire problems with Reason 8.1 into Logic 10.1.1 and as you experience it's not with Reason into Ableton or Ableton into Logic (although Ableton has crashed a few times this way). Everything worked fine for me up until I downloaded the latest Logic download last week.
Is your Reason loading up as normal in stand alone mode? For me, Rewire either works perfectly (10% of the time) or I get the error message 'Engine not responding. Please check your Rewire host'. I have tried reinstalling Logic and have checked lots of forums but cannot find any concrete answers.
It's kinda driving me crazy as I'm in the middle of a project so would like to get it sorted asap! Let me know if you find anything! M

Has anyone managed to deploy Acrobat Pro 9.0 for Mac through ARD?

Has anyone managed to get Adobe Acrobat Pro 9.0 for Mac to deploy with any level of reliability through tools such as Apple Remote Desktop?
The main CS3 apps are "better", if still kludgy to deploy somewhat silently, but every time I've tried to get Acrobat Pro 9.0 to deploy, it steadfastly refuses to do so without demanding admin access on at least the first launch, and insisting on running the Updater in the process, which is completely unacceptable.
I should say that I've looked at their Adobe Acrobat deployment site (http://www.adobe.com/products/acrobat/solutions/it/), and it's entirely useless for the Mac version.
Why do Adobe make this so hard?

Okay, I think I've figured this out.
* On a clean machine (ie: no Adobe software), install Adobe Acrobat Pro
* Run Acrobat. Insert license code. Allow it to "selfheal". Quit.
* Run Distiller. Allow it to "selfheal". Quit.
* Edit AcroEFGPro90.plist and AcroEFGDist90.plist which can be found in Contents > MacOS within the Acrobat and Distiller apps respectively.
* Change the "Requires" tags from "YES" to "NO" for all the file resources.
* Copy these to plist files into /Library/Application Support/Adobe/Acrobat/ and overwrite the ones that are already there.
* Run Acrobat and Distiller again. Allow "selfheal" if prompted. Quit.
* Run again. Quit.
* Build a Mac OS X installer package of the following:
/Applications/Adobe Acrobat Pro 9.0
/Applications/Utilites/Adobe Utilities
/Library/Application Support/Adobe/
/Library/Application Support/FLEXnet*
/Library/Preferences/com.adobe.*
/Library/Preferences/FLEXnet*
/Library/Internet Plug-ins/AdobePDFViewer.plugin
/Library/ColorSync/Profiles/
/Library/Printers/PPD Plugins/Adobe*
/Library/Printers/PPDs/.../.../.../ADPDF9.PPD (one per language)
/Users/Shared/Adobe
/usr/libexec/cups/backend/pdf900
* After you've built the package, go through the Acrobat application bundle and find cupshup.pl. Copy it into the Resources folder of the installer package, and rename it to "postflight" (this gets the installer to configure the PDF printer).
* Distribute through ARD.
* Grab com.adobe.* from ~/Library/Preferences
* Distribute the com.adobe.* files to all users; the .plist files can be done through Workgroup Manager, however com.adobe.118.registration must be copied as-is into the user folder, rather than being injected via MCX or the defaults command or any other method, as it's not a plist.
Dear Adobe,
MAKE THIS SIMPLER.
Your Friend,
etc...

Inventory Management Collection run

We would like to increase our Inventory Management Collection run to every 5 minutes (currently every hour). Can anyone forsee a problem with this or have experienced a problem
We have an Unserialized V3 update
Thanks

I do not see any issue. The LUW count of the records getting written to the delta queue might increase marginally, but that should not be an issue.

Has anyone managed to install aperture 2 with a 12" G4 laptop?

Mine runs Leopard 10.5.2 with a 1.5 Ghz processor and 1.25GB of memory. The system checker says it's fine but it tells me my graphics card will not work it properly. My graphics card is the GeForce FX Go5200.
Has anyone managed to get it installed, it's blinkin annoying that i cannot load it on this laptop?

I've got it running now on my 12" 1.25 PB with 768Mb of RAM, it took some fiddling but it is running now. On launch it tells me 'The version of ImageIO installed on your computer is not supported by Aperture' but still gives me the option to continue and from there it launches as normal.
It appears that my Nikon D3 files are not supported but earlier cameras like my D200 are fine. My PB is running 10.4.11 btw.
I'm not sure I'm allowed to explain how I got it running here, I've no wish to contravene any forum rules but you can contact me at flateric1 AT mac.com and I can give you my iChat name to talk you through it if you wish.
FlatE

HT2693 Has anyone managed to download the March 2013 update of Numbers on an iPad 1?

I recently tried to update Numbers but it says download not available at this time and has just hung there every since. Has anyone managed to update Numbers and can they help please

Thanks to both of you - I was running 4.2 on my iPad, and the download link at daw.apple.com for the 4.2.1 GM was taken down after it shipped - so I was bummed...
Found your post with the direct download link - boom! Happy camper...
Aaron

Prevent Adobe extension manager from running

Hi
does anyone know where I can turn off the Adobe Extension manager from running everytime I start Dreamweaver?
We are a school so clearing down the profiles on each machine after each logoff. Needless to say at the next log on it runs again, not something we can expect the studenst to have to do every log on! As we deployed CS5 via group policy we do not appear to have the luxury to be able to uninstall the manager seperately.
Anyone know where in the registry we can disable it from running everytime we start Dreamweaver?
Many thanks
Addid

Hi
The extension manager should not start with dreamweaver as it is a stand-alone application, have you checked that it is not set to start along with dreamweaver in your servers 'start-up' script for dreamweaver.
You could also submit a 'bug report' here - https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform, (ignore the 'wishform' in the link as bug reports are also on the same page). There is also a link to the Adobe support page in the linked page text should you wish to contact them.
PZ

Anyone managed to run Izotope's Vinyl in Logic Pro 8?

Similar Messages

Maybe you are looking for