Anyone not get the camera shortcut after updating to ios 5?

anyone not get the camera shortcut after updating to ios 5?

Tried double pressing the home button when on lock screen?

Similar Messages

  • IPhone 6 display got zoomed while using the camera (happened after update to iOS 8.1.3)

    Hi, after updating to the newest iOS version (iOS 8.3) I have experienced a lot of graphics issues. I experiensed it in the keyboard with some of the "button pop-ups" lingers. Also, when I rotate the phone it kinda shows a negative version of the screen besides the normal one during the rotation animation.
    However this is not the big problem.
    Cause, while I was about to take a picture, using the standard camera app, I zoomed in stretching two fingers away from each others. Suddenly the whole screen zoomed in, not only the camera. So after that I can only see a limited part of the screen. I have tried to turn the phone off and on and it seems promising during the startup (I can then see the apple logo in normal size), but as soon as it comes to the locked screen it zooms in again.
    Because of this IO am now unable to use the cellphone and I consider to downgrade to 1.2.
    I appreciate all suggestions.

    To disable Zoom double-tap the screen with three fingers.
    Go to Settings > General > Accessibility > Zoom and turn this OFF.

  • My iPhone 5 suddenly could not hop onto LTE anymore, after updating to IOS 6.1

    My iPhone 5 suddenly could not hop onto LTE anymore, after updating to IOS 6.1. I know there is LTE coverage at my house, since before I updated it, it could hop on to LTE just fine, in the same location. My Carrier is CSL Hong Kong. Does anyone have this problem? If so, does anyone have a answer to it?

    Hi AEEA-Family,
    I also did the update this morning and had the same problem also on Vodacom. The whole morning after the update I have No Signal, turning the phone on and of gives you signal for a couple of minutes then it drops again to no signal.
    I've just made the following changes on my Phone and all seems ok again.
    Here are the steps I took to resolve it on my phone.
    1. Go to "Settings" > "Carrier" > Turn off "Automatic", wait for list of Carriers and select "Vodacom-SA"
    2. Go to "Settings" > "General" > "Cellular" > Turn off "Enable LTE"
    3. Go to "Settings" > "General" > "Cellular" > "Cellular Data Networks". Then Change EVERY APN from lte.vodacom.za to internet
    After I made all those changes I did a hard restart of the phone and now all seems fine.
    I suspect the update this morning Enabled all Vodacom's LTE settings, yet Vodacom is not 100% LTE yet in our areas and this is causing the problem.
    Hope this helps other people.

  • HT4623 My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine

    My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine. Please help me out, done all the troubleshooting like restarting, side switcing, cleeaning the headphone jack etc.,

    Hi I also have this problem. Sound was only working on the headphones and also on the volume slider in the settings app. Everywhere else I get no sound and no volume slider. Now the headphones don't work either.
    (I'm using an ipad 2 iOS 6.1.2) 
    And NO it's not muted. I've reset all settings and restarted the iPad. Been searching forums for a couple days. Some say its a dirty docking port problem, others suggest a Skype or other app update that could be the problem.
    No volume control icon appears when I press the volume control buttons. Only says sound effects, if it says anything at all. Most often there is NO volume icon. YouTube, video, music, and other game apps, no sound.

  • Why AirPrint is not working on my ipad4 after updating to IOS 8.1?

    WWhy AirPrint is still not working on my ipad4 after updating to IOS 8.1

    Hello mmpreston,
    Thanks for using Apple Support Communities.
    To troubleshoot issues with AirPrint on your iPad please follow the directions outlined below.
    Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
    Make sure your printer has paper, and enough ink or toner installed.
    Make sure your printer is connected to the same Wi-Fi network as your iOS device.
    Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
    Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
    Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
    About AirPrint
    Take care,
    Alex H.

  • TS1363 i could not activate my iphone 3G after updating to ios 6.0.1

    i could not activate my iphone 3G after updating to ios 6.0.1

    Generally this is a sign that the iPhone had previously been
    hacked/modified/jailbroken and the update relocked it to the
    original wireless carrier. If this is the case, only that wireless
    carrier can unlock your iPhone. You must contact them to see
    if they offer unlocking and if you qualify.
    If the iPhone was advertised as unlocked and you are still within
    the return period, start a claim with eBay to get your money back.
    What wireless carrier did you use before this problem?
    Does the app Cydia appear on your iPhone?
    What does it say when you look at Settings=>General=>
    About=>Carrier?

  • Email not cc'ing, Email not cc'ing or fwding after update to ios 7.0.6

    Email not fwding or cc'ing after update to ios 7.0.6 but able to send and receive just fine. Anyone have any solutions?

      I'm sorry if I sound intrusive, but did you even read my question? I did not mention the speaker or the microphone at all but yes I tested them anyways. When I said I tested and replaced them, I was talking about the two previous parts I had mentioned, the dock, and the headset jack because the device is acting as if it is docked on something like an iHome, or plugged into a headset. But FYI, I did also test the speaker and it was the correct putting out the correct ohms and voltage, that is not the issue. Especially since I have sound sometimes and there are no loose connections in the phone. Like I said, I don't plan on going to apple at all as they will not help me with a software issue. And furthermore I mentioned jailbreaking because I know how to do it. I've done it before, I've done it for friends. Did not say that this phone was jailbroken. I didn't think I could have been anymore clearer on the issues I was having and steps I've taken to try and resolve this problem but thanks for your help anyway's.

  • My Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

    my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

    I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
    It seems to be Apple bug.
    Thanks for you efforts

  • Anyone notice distorted bass in songs after updating to iOS 5

    I have a 4th gen Ipod Touch and just upgraded to iOS 5 today. When I play a song the bass sounds all distorted and rattles as if I am using incredibly cheap headphones or something when I am using good quality Bose headphones. I did not notice this in iOS 4. Has anyone else had this issue, and if so, how did you fix it. I am thinking or resyincing and setting up my ipod as a "new ipod" to see if that works, but have to wait until after work.

    avideditor wrote:
    Anyone notice color shifts in grades after updating to 1.5? There is a warning to this effect when you update legacy projects, has anyone experienced this, and if so, what kind of shifts were noticeable and how were they solved?
    I'll see if I can hunt it down in the docs (a quick search didn't reveal the info) - but 1.x projects are not fully compatible with 1.5 and there may be unpredictable results.
    - pi

  • Safari not work for iPad mini after updated to ios 6.1.3

    After updated to ios 6.1.3, Safari just not response. I cannot input any web address. Do anyone has this problem? Do anyone know how to solve it?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!

    My device is Iphone 5 64gb IOS 8.
    I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
    1. How can i fix it?
    2. Or how to rollback to IOS 7+ ?
    3. Should i come to app store with this problem?

    I'm having this same problem too.  Worked fine prior to iOS update.  I contacted Verizon this morning who advised that this is a known issue.  They suggested I backup my device, and perform a factory data reset.  When prompted to update to iOS 8 again, re-installation has been known to resolve the issue.  With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.

  • Anyone else having an issue with the camera shortcut after the 5.1 update to iphone?

    The shortcut button doesn't access the camera anymore although it is always present.

    I'm having no such issue.  What steps have you taken to troubleshoot thus far?  Have you taken the basic troubleshooting steps recommended in the User Guide?

  • How do I get the chat heads after updating the newest version of Facebook? Mine still shows the old meassging version

    After updating the newest version of Facebook, my messaging is still the same old way even though it says it was supposed to turn to chat heads. Anyone else experiencing this?

    you're welcome, you can get it sooner if you want to search google for directions, but i would just wait.

  • Do I not get the "open file after publishing" checkbox with the trial version?

    I owned the Adobe Acrobat 8 Professional version on my pc, and recently bought a Mac. Do I not have the option to "Open file after publishing" checkbox with the trial version? Do I have to repurchase the whole program to get that?

    uninstall.
    download from prodesigntools.com.
    if you follow all 7 steps you can directly download a trial here:  New Adobe Lightroom 6 (CC) Direct Download Links – Free Trials | ProDesignTools
    and activate with your serial number.
    if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

  • I can not use the Chessproblems website after updating to Firefox 5

    After updating to Firefox 5 I can not have full access to the Chessproblems website, http://www.chessproblems.com/prob.php?id=648&next=1
    I had no problems before. Can you help with this?
    Thanks,
    Edward

    Solved after downloading last Java version

Maybe you are looking for

  • How do I set up a guest account using the AirPort Express  2nd Generation?

    I Just purchased a new 2nd Generation AirPort Express.  The features list and the set-up guide says that I should be able to set up a guest account, but nowhere have I found how to do this.  I am running AirPort Utility 5.6 on my MacBook Air under Li

  • Assignment of FSV with 52 periods in OB37 not possible

    Hello SAP Guru, I am having this concern of assigning the Fiscal Year Variant WK with 52 periods thru OB37 to company code 1000 but error "More than 16 periods can only be used in the Extended General Ledger" appears. The management would like to cha

  • Problems with CIF (Logical system not assign to BSG)

    Hello, We are sending all master data from ECC to APO. We set up the CIF in DEV and all worked fine. But when we try to send the data from ECC to APO in QA an error appears. It says that the logical system is not assign in the BSG. Apparently the con

  • Create User-Defined Planning Layouts for Detailed Planning

    Dear All I would like to change layout of Tcode CJR2. I must copy planning layout "1-702" because I would like see: sender cost center definition sender activity type definition alloc. cost definition. what do I do? Thanks salvo50

  • How to move ' 0 ' for repeated values

    Hi Experts, Please advice how to move zero or '   '  to a field if the values are repeating. As per my requirement I need to fetch finished goods  from mseg-matnr and raw materials from resb-matnr  where baugr eq mseg-matnr and I need to display ebel