Anyone on O2 managed a successful IOS5 install?

Seems to be a lot of doom and gloom about IOS5 so before I go installing have people managed to install successfully without bricking?
I'm on O2 in the UK - surely some people have success stories to share?

Yes, it worked fine for me, first time. It was a little slow to download as Apple's servers were being hammered, but the congestion should've eased a bit by now.
Bear in mind this is a support forum. You won't find thousands of messages from people who had no problems.
The phone network you are using is irrelevant. All iPhone models get the same update.

Similar Messages

Has anyone managed to successfully set up VPN to work on BT hotspots?

Hi all
I wanted to connect via VPN at BT hotspots. BT recommend using a Cisco client (which you can download if connected to one of their "premium hotspots") but this isn't compatible with OSX 10.7 (you get Error 51: can't connect). There is loads of (too much) stuff written on google about this problem, but I wonder whether anyone out there has managed to successfully configure the built in OSX VPN client to work with BT? BT of course abdicate all responsibility for this...
Many thanks,
Dave

I suspect I may never know why, but now, inexplicably, everything is working.
Out of curiosity, I tried to connect via an older win2000 machine that we use for a file server and it worked!
After we rebooted the other XP machines, they started working too.
I'm sure the fix was anything but connecting a win2000 machine, but I'm just happy it works now!

Are There anyone,that obtained successfully to install the OEM in the OEL4?

Hi !
Are There anyone,that obtained successfully to install the OEM in the OEL4?
I made this question becouse I cound't find some rpm's packages as follows:
Checking for compat-libstdc++-296-2.96-132.7.2; found Not found.     Failed <<<<
Checking for libstdc++devel-3.4.3-22.1; found Not found.     Failed <<<<
Checking for openmotif-21-2.1.30-11; found openmotif-2.2.3-10.1.el4.     Failed <<<<
Checking for sysstat-5.0.5-1; found Not found.     Failed <<<<
If someone has this packages, please send me a message or reply this tread.
Best Regards.

Install the following “rpm” from the EL4 cd#3
mount /media/cdrecorder/
rpm -ivh /media/cdrecorder/Enterprise/RPMS/sysstat-5.0.5-11.rhel4.i386.rpm
rpm -ivh /media/cdrecorder/Enterprise/RPMS/compat-libstdc++-296-2.96-132.7.2.i386.rpm
rpm -ivh /media/cdrecorder/Enterprise/RPMS/libaio-0.3.105-2.i386.rpm
Even then you will have the following error:
compat-libstdc++-296-2.96-132.7.2 not found
libstdc++devel-3.4.3-22.1 not found
openmotif-21-2.1.30-11 not found
It is acceptable to check off on "User Verified" and proceed with the installation.
Check out metalink note:343364.1 for complete details on this.
Message was edited by:
Steeve

Management Point fails after installing SCCM 2012 SP1

I'm carrying out an install of SCCM 2012 SP1 with the following hardware (fresh install not an upgrade from 2007)
1. Newly built Windows Server 2012 box
2. Site database located on a remote SQL 2012 cluster, both nodes Windows Server 2012, with CU5
The install went fine but when checking the Site Server Components the Management Point isn't installing. The following both show errors;
SMS_MP_CONTROL_MANAGER - MP.msi could not install. Checked the MP.msi log file which shows the following errors;
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_Global.mof' (Phase: 3, Object: 5, Lines: 76 - 83, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\PolicyDefaults.mof' (Phase: 3, Object: 4, Lines: 49 - 57, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\StateMsgSchema.mof' (Phase: 3, Object: 6, Lines: 89 - 94, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\DataTransferService.mof' (Phase: 3, Object: 5, Lines: 318 - 323, Error: 80041002)
[19:53:19] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_MP.mof' (Phase: 3, Object: 1, Lines: 31 - 36, Error: 80041002)
MSI (s) (0C!94) [19:53:20:862]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
CustomAction CcmRegisterWmiMofFile returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
SMS_NOTIFICATION_SERVER - bgbisapi.msi could not install. Extract from log below;
[19:53:38] IGNORE: Failed to delete extension 'C:\Program Files\SMS_CCM\bgbisapi.dll'. Return Code = 0x80020009 (The extension might not be registered)
[19:53:39] WARNING: Failed to remove PerfLib entries for performance application SmsBgb (2)
[19:53:39] WARNING: Failed to remove configuration for performance application SmsBgb (80070057)
MSI (s) (0C!80) [19:53:39:540]: Product: BGB http proxy -- Internal Error 25001. 80070057
Internal Error 25001. 80070057
CustomAction CcmRegisterPerfCounters returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
I've tried uninstalling MP and reinstalling, triple checked all the right pre-reqs in Roles and Features are enabled, even rebuilt the server from scratch and tried again but same result.
Would really appreciate some help if anyone's fixed this issue

I'm still struggling, I've uninstalled MP
<04/16/14 08:06:59> SMSMP Setup Started....
<04/16/14 08:06:59> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /deinstall /siteserver:EICSC001 SMSMP 0
<04/16/14 08:06:59> Deinstalling the SMSMP
<04/16/14 08:06:59> No versions of SMSMP are installed. Returning Success.
<04/16/14 08:06:59> ~RoleSetup().
Ran the command, Invoke-Command {gwmi -query "SELECT * FROM __Namespace WHERE Name='CCM'" -Namespace "root" | Remove-WmiObject}
Checked Namespace Instances to ensure '= ccm' is not longer there.
Rebooted Server and re-installed MP but it still fails
<04/16/14 08:37:26> ====================================================================
<04/16/14 08:37:26> SMSMP Setup Started....
<04/16/14 08:37:26> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:EICSC001 SMSMP 0
<04/16/14 08:37:26> Installing Pre Reqs for SMSMP
<04/16/14 08:37:26> ======== Installing Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Found 2 Pre Reqs for Role SMSMP
<04/16/14 08:37:26> Pre Req MSXML60 found.
<04/16/14 08:37:26> No versions of MSXML60 are installed. Would install new MSXML60.
<04/16/14 08:37:26> Enabling MSI logging. msxml6_x64.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\msxml6_x64MSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\00000409\msxml6_x64.msi
<04/16/14 08:37:26> msxml6_x64.msi exited with return code: 0
<04/16/14 08:37:26> msxml6_x64.msi Installation was successful.
<04/16/14 08:37:26> Pre Req SqlNativeClient found.
<04/16/14 08:37:26> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
<04/16/14 08:37:26> Pre Req SqlNativeClient is already installed. Skipping it.
<04/16/14 08:37:26> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Installing the SMSMP
<04/16/14 08:37:26> Passed OS version check.
<04/16/14 08:37:26> IIS Service is installed.
<04/16/14 08:37:26> No versions of SMSMP are installed. Installing new SMSMP.
<04/16/14 08:37:26> Enabling MSI logging. mp.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE
SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<04/16/14 08:37:26> mp.msi exited with return code: 1603
<04/16/14 08:37:26> Backing up D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<04/16/14 08:37:26> Fatal MSI Error - mp.msi could not be installed.
<04/16/14 08:37:26> ~RoleSetup().
On checking I don't seem to have anything in IIS, no default web site.
I've tried reinstalling IIS and reinstalling SCCM 2012 but what ever I do I still hit the same issue with the Management Point.
Any assistance would be greatly appreciated.
Thanks

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Management Point did not install during deployment

I found the 2007 client installed on this server prior to the install. I removed the client with /uninstall... however after the installation of CM 2012 the managment point did not install. It pointed me to the mpmsi.log. Below is that log. Has anyone run
into this issue before?
=== Verbose logging started: 2/25/2014 15:58:05 Build type: SHIP UNICODE 5.00.9600.00 Calling process: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe ===
MSI (c) (C4:40) [15:58:05:347]: Resetting cached policy values
MSI (c) (C4:40) [15:58:05:347]: Machine policy value 'Debug' is 0
MSI (c) (C4:40) [15:58:05:347]: ******* RunEngine:
           ******* Product: D:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (C4:40) [15:58:05:348]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (C4:40) [15:58:08:348]: Failed to grab execution mutex. System error 258.
MSI (c) (C4:40) [15:58:08:350]: Cloaking enabled.
MSI (c) (C4:40) [15:58:08:350]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (C4:40) [15:58:08:350]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (c) (C4:40) [15:58:08:351]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (C4:40) [15:58:08:351]: MainEngineThread is returning 1618
=== Verbose logging stopped: 2/25/2014 15:58:08 ===
MSI (s) (80:58) [15:58:11:836]: User policy value 'DisableRollback' is 0
MSI (s) (80:58) [15:58:11:836]: Machine policy value 'DisableRollback' is 0
MSI (s) (80:58) [15:58:11:837]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (80:58) [15:58:11:837]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (80:58) [15:58:11:844]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (80:58) [15:58:11:860]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (80:58) [15:58:11:867]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (80:58) [15:58:11:881]: Destroying RemoteAPI object.
MSI (s) (80:60) [15:58:11:889]: Custom Action Manager thread ending.

MSI (c) (C4:40) [15:58:08:348]: Failed to grab execution mutex. System error 258.
This normally means there is another install process in progress. So please restart the computer and try again. If no avail, check whether there is a process name msiexec running.
Juke Chou
TechNet Community Support

HT2509 Hello I wonder if anyone knows how to find, download and install a suitable IPA (phonetics) font for the Mac Air? I need to be able to use a pop up window of fonts.

Hello I wonder if anyone knows how to find, download and install a suitable IPA (phonetics) font for the MacBook Air? I need to be able to use a pop up window of fonts.

Unless you've done anything to change it, Google keeps every email that ever passes through their server in your All Mail folder/mailbox/label. Even if you delete stuff, they hold onto it, there. You have to go out of your way to actually delete anything permanently.

Win 7 won't boot after successful (?) install

Hi Group,
Tried searching the forums for this problem and found similar postings but I think my problem is different...
I've successfuly installed Win 7 Ultimate x86 in that I get to the point of entering product key, etc. but when it does the final reboot I just get a blank screen with a blinking cursor. Tried some of the workarounds like clearing the pram/smc, deleting the ati driver .sys file (which doesn't seem to exist actually) and also using the driver autounattend from the usb drive. I'm running the latest version of boot camp.
Not sure what to try next. I've been successful installing this version of windows in VMWare and on a fujitsu-siemens laptop without any issues. I've also been successful at installing Xp via bootcamp. Really at a loss as to what to try next. Any help would be greatly appreciated.
Cheers,
Jeff

*Take an iMac and Windows 7 Blue screen fun*
the final part of the Win 7 install and Mr Blue screen due to the Nividia driver supplied on Win 7 DVD kills iMac GT7300
1. Install... and Blue screen!
2.Re-boot but from the Win 7 install disk – seems to work if you hold alt on boot up and select the disk to boot from!
3.When you get into the Windows installer, click past the language selection. Then click "Repair your computer".
4.Windows will scan for installations and prompt you with a list. Select your "C" drive and click Next.
5.You should be presented with a windows titled *System Recovery Options*.
At the bottom of this list you should see +Command Prompt+.
Select the command prompt.
6.When the console opens, you can delete the offending driver using the following command:
DEL C:\WINDOWS\SYSTEM32\DRIVERS\NVLDDMKM.SYS
7.Close the command prompt window and click the Restart button.
This time, boot from your hard disk.
You will complete the install with no Blue screen.
Having done this go to the Nivida web site and download the GT 7 series drivers for Windows 7.
Install, re-boot and ...
+*... install Bootcamp drivers and right off your back to Blue Screen...*+
Repeat 1-7 and install newly downloaded drivers and off you go
http://geekswithblogs.net/ajames/archive/2009/08/12/take-an-imac-and-windows-7-r tm-ndash-and-have.aspx

Has anyone noticed MacBook Air slowing down after installing Maverick

Has anyone noticed MacBook Air slowing down after installing Maverick?

Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy

Can anyone tell me where to find an install guide for the Liveoffice app.

Can anyone tell me where to find an install guide for the Liveoffice app.
Thanks
Jeff

Hi Jeff,
You can download the install guide for Liveoffice application from the link provided below,
http://help.sap.com/businessobject/product_guides/boexi/en/boXI_LiveOfficeInstall_en.pdf
Hope this helps you.
Regards,
Abhijeet T.

Has anyone got an answer to fix ios5 problem, no sim card inserted...

Has anyone got an answer to fix ios5 problem, no sim card inserted...

I bought a new sim card today at the t-mobile shop and they activated the card just by putting credit on, i got home put the sim in the iphone and still got the same message. I have restored and shut down I dont know how many times and updated itunes, I am wishing i had said no to updating the phone as i have no iphone to use and apple say i should go to an apple shop.

Apps will not open after ios5 install. Any solutions?

Apps will not open after ios5 install. Any solutions?

My husband had the same problem with some apps after I updated his iPad 2 to iOS 5. I checked the app store and there were updates for the apps to support the new software. After updating, all apps work just fine.

Adobe Application Manager says Lightroom is installed. Its not.

I have been migrating my apps to a new drive and now I cant install Lightroom couse Adobe Application Manager says Lightroom is installed allready. What to do???

We have to Re-name the OOBE folder and so we will be able to install the software from AAM, once it is installed we can undo the OOBE folder.
Mac HD> Application support > Adobe> OOBE
For 32 bit : C:\Program Files > Common Files > Adobe\ OOBE
For 64 bit: C:\Program Files( X 86) > Common Files > Adobe\ OOBE
You can re-name the OOBE folder as OOBE.old.
Note: Please don't forget the Re-name the OOBE.old as OOBE once the software is installed.

How do I find out and manage which devices I installed Adobe Creative Suite on?

I need to activate Adobe Creative Suite on a second computer, but a window comes up saying that I already have installed Creative Suite on a maximumo of 2 computers. I know that I can only download on 2 computers, but I have no idea where I downloaded it the second time. I need to find that device and deactivate it so that I can use my real 2nd computer.
So, how do I find out and manage which devices I installed Adobe Creative Suite on?
And if I deactivate it, can I activate my 2nd computer?

Yes the End User License Agreement is the same for the Student and Teacher edition. You can find more details at http://www.adobe.com/products/eulas/#desktop.

Downloaded the creative cloud, success in installing photoshop but got an error msg 'installation failed. file is corrupted'. what can I do?

Downloaded the creative cloud, success in installing photoshop but got an error msg 'installation failed. file is corrupted'. what can I do?

Thanks.
I'm using mavericks OS.
Here is a screenshot.
Please let me know what other details you need. I have another team member that wasn't able to install Illustrator.
We both got new computers, upgrading from CS5.5, deactivated the previous version and deleted the file from the old macs.

Anyone on O2 managed a successful IOS5 install?

Similar Messages

Maybe you are looking for