Anyone ordered/reviewed this full cover glass protector for iPhone 6?

Here you go: http://www.spigen.com/brands/apple/iphone/iphone-6-and-6-plus/iphone-6/iphone-6- screen-protector-full-cover-glass-4-7.html
Spigen just released their latest screen protector for iPhone 6 which is a full cover version.
I have been using their glass protector (not a full cover version), it's very nice but ever since then I've been looking for a glass screen protector that doesn't leave a gap around the edges of the screen.
But i'm worried that this glass protector will have the same problem like others had - "still some space between the curved screen and the protector".
So I hoping anyone who ordered/reviewed this glass protector could shed some light.
Thank you.
https://www.pinterest.com/pin/create/extension/

Hello spinworkz,
I have bought this screen protector shortly after the release.
Once received I was very excited to use it with my Spigen slim armor case, as all the other full screen protectors are not compatible with this case.
Installation was fairly easy. You have to align it properly on the screen otherwise the cases will push against the screen protector. After installation I got very very disappointed with the quality. There is some space around all edges to make sure it is case compatible with most Spigen cases. On the instructions it writes that the screen protector is designed to use with their cases and that if you don't use their cases the screen protector might collect dust.
Well the dust collection is a major problem even with the slim armor!
It has big gaps between the screen protector and my slim armor and after one day use, all around the edges it's full of dust! The screen protector "lays" down on the flat part of the screen and is NOT going over the rounded edges, therefore it leaves a gap between the rounded edges and the screen protector in which the dust is collected.
After 1 day I dropped my phone from my bed table and guess what?! The screen protector just cracked from the bottom edge where it doesn't have a solid bond over the rounded edges. I emailed Spigen and they supplied me with a new one which I still have laying here in the box as I decided to go for the ZAGG Invisibleshield HDX, it's a poor design and I would NOT recommend spending your money on this piece of .........
Hope this helps...

Similar Messages

Boxwave Cleartouch Crystal Protector for iPhone 4? Sending Back the Zagg.

Has anyone tried the Boxwave Cleartouch Crystal Screen Protector for iPhone 4 yet? I've used Boxwave products in the past and like them, however the 3G protectors did not get good reviews for fit so I was wondering if anyone had purchased and installed a set?
I assume it comes with the front and back protectors? It doesn't say in product description but the images seem to indicate both sides.
I bought a Zagg Invisible Shield protector and was really disappointed. The flexibility of the product during installation resulted in the area around the Home button getting distended a bit and curling at the edges so it can't adhere properly and looks bad. Clearly I over squeegeed, but I've installed protectors on iPhone's 1G and 2Gs with no problems and I felt I was applying pressure as indicated in the Zagg video.
I also don't care for the "orange peel" effect and stickiness of the Zagg and it seems to be a dirt magnet, not good for using with the Apple bumpers.
So any input on the Boxwave would be appreciated.
Thanks,
JoeL
Atlanta, GA

iGrooveLA wrote:
i like power support as well but since it's not out yet for the iPhone 4 what are people using in the interim? just got my iphone today and i haven't removed the front/black plastic that comes with it...i just stuck the whole thing in my black bumper...
You can try the ZAGG invisible shield available at bestbuy http://www.zagg.com/
or Clear Coat http://www.clear-coat.com/home.php <~~~Mial order
Ghost Armor <a class="jive-link-external-small" href="https://">https://ghost-armor.com/index.php <~~~Online

TrueClear Anti-Smudge Screen Protector for iPhone 5 ?.

TrueClear Anti-Smudge Screen Protector for iPhone 5
This screen protector is good?.
here is the link:
http://www.belkin.com/us/F8W180-2-Belkin/p/P-F8W180-2?q=::devicePath:/Device/IPH ONE/IPHONE5
also, i saw this:
TrueClear Transparent Screen Protector for iPhone 5
http://www.belkin.com/us/F8W179-3-Belkin/p/P-F8W179-3?q=::devicePath:/Device/IPH ONE/IPHONE5

any help?.

What is the best edge to edge glass screen protector for iPhone 6

What is the best edge to edge glass screen protector for iPhone 6

none of the ones at the link below are glass - they are all film - if you are looking for glass i know of several options
Zeos - www.zeosdirect.com
Crown - www.bodyguardz.com
Moshi - www.moshi.com
i think Zagg may have one www.zagg.com
and im sure there are others
search Amazon for iPhone 6 tempered glass screen protectors

My iPad makes a high low high tune every fifteen to twenty minutes, anyone know of this and have a fix for this annoying sound.

My iPad makes a high low high tune every fifteen to twenty minutes, anyone know of this and have a fix for this annoying sound.

I Also have this problem!!
In my situation, the screen simply started exhibiting the same symptoms a few weeks ago (early February) for no apparent reason. At first I thought the screen was dead, but discovered the heat solution by accident. Now I turn it on and keep it from going to sleep until I go to bed. Thank goodness the battery is still awesome on this thing.
I bought it new and still has the original screen, I keep it at home (never below 62 degrees). Coincidentally, this happened a day or two after the expiration of the warranty!! Any help figuring this one out would be eternally appreciated.
iPad mini retina Wi-Fi, iOS 8.1.3

Will i need a case or screen protector for iphone 5

will i need a case or screen protector for iphone 5? heard the glass is tougher, but still concerned about scratches.

I think you probably should ask if others ever felt they needed them. I can tell you from my experience that applying a screen protector never worked out for me and I always took them off shortly after applying (bubbles / dust enclosed). But then a former colleague had his applied in an Apple Store and that looked perfect. Fortunately I never had a scratch in a screen as I always took good care (and my iPhones always had a pocket in my trowsers to themselves and didn't need to share it with keys or other scratchy objects ...).
The case is a completely different story: I think every phone I had so far managed at least once to slide out of my pockets (don't laugh!) while being on a loo and hit the floor from low hight. Due to the covers I had, the phone looked as new as before, just the cases had a slight scratch if at all. Therefore a case would be highly recommended esp as it can safe you iPhone if you drop it from higher hight.
Reading the first hands-on reviews it appears that the new iPhone 5 is built with materials that are less prone to scratch or crack but my first purchase next Friday will be a case. Not sure if bumper or full case but a case nevertheless.

I want to switch from an android to an iPhone but wondered if anyone knows if there is a swipe option for iPhone?, I want to switch from an android to an iPhone but wondered if anyone knows if there is a swipe option for iPhone?

I would like to switch to an iphone from an android. Wondered if anyone knew if apple has a swype app for iphone. This is the only thing that I love about my android

Snozdop is absolutely right, but after years of using iOS devices, I finally began using Keyboard Shortcuts. I don't know why I never did it before, especially considering I use Textexpander on my Mac.
This is an older tutorial, but it pretty much works the same on iOS 7 today.

Just started getting intermittent error on my 3G:This accessory is not optimized for iPhone..." but nothing is connected or plugged in to it or anything?

Was just checking my iPhone and when I pressed the home button to wake it up the message "no sim installed" was on the screen, obviously it was so I restarted the phone, that cleared it but then I started intermittently getting a popup message "this accessory is not optimized for iPhone...(don't remember the rest), did a hard reset and still happening once in a while, there isn't anything plugged into or connected to my phone at all though, would appreciate any help or advice please

The most common reason for message "this accessory is not optimized for iPhone" with nothing plugged in, is dust, debris etc. in the iPhone dock port. Clean the dock port with a clean dry toothbrush. If the message returns again, clean the dock port again very carefully using some isopropyll alcohol, especially the pins which are on top of the dock mid rib.

I can't get me Ipod on my Iphone4 to play, it will until an error comes up saying this device is not optimised for iphone, with nothing plugged into it.

My Ipod on my Iphone wont play and I have no volume bar. I can hear when the phone rings and I can hear people talking when they call, it seems to be a software promlem that I dont know how to fix. I have been having this problem and I have realized that when the error comes that this accessory is not optimised for iphone, my Ipod wont work. I have never had the air play button and my software is the current editon.

Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Hi can anyone help me how to get facetime application for iphone 4s

Hi
can anyone help me how to get facetime application for iphone 4s since i am not able to find it.

FaceTime is builtin, there's no icon. Use your Contacts app and if the recipient has iPhone 4/4S, iPod Touch 4th G, iPad 2 or Mac, you can FaceTime them using Wi-Fi.
Message was edited by: ckuan

This equipment isn't made for iphone !!

My iphone started to show the massage "This equipment isn't made for iphone do you want to turn on flight modus........" i got this massage first time using a ipod car charger. This was whit 1.1.4 than i upgrade to 2.1 (5F136), but the massage still white me. The main problem is that i can't use the phone as ipod, the musik stops after few miuntes. I have tryed to clean the conction spot of the phone, whit no luck. Any one that have the same problem and mybe an answer to my problem ?
This is an 1.gen iphone.

I get "This accessory is not made to work with your iphone." This is followed by an invitation to go to airplane mode. (Apple must have a whole department devoted to non sequiturs.) This happens every time I turn the phone on. Of course, I'm not using any accessory. I have never used any accessory. The phone just started doing this out of the blue. This is one of several annoying problems with this piece of trash. If it weren't for the great apps, I would have tossed this thing long ago. I'm making my first trip to a "genius bar" tomorrow. I tried to back up my data in preparation for that adventure, but couldn't because Itunes doesn't recognize my phone. I tried all the unhelpful "solutions" on Apple's (non)support site -- to no avail. This particular grossly overpriced Apple product would be a less than a year old 8GB iphone. I am running the latest software both on the phone ane in Itunes.

I have update my Ipad (iOS 5) and now I can't see the lyric of my musics. This problem don't exist for Iphone 4.

I have several lyrics of my musics but after I have updated my Ipad (to iOS 5) I can see anymore.
This problem don't exist for Iphone 4.
How I can fix this problem????
Help me!!
Thank you

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

The "This Accessory is Not Designed for iPhone" Nag

"This Accessory is Not Designed for iPhone"
I guess that's the oldest (bug?) in the iPhone. What I have noticed in going from the (highly coveted) firmware 3.0.1 to firmware 4.2.1 is that after you press “dismiss”, the "This Accessory is Not Designed for iPhone" nag reappears in 5-6 Mins.
With my old firmware the nag would only show up once, with firmware 4.2.1 it nags over and over again. (And of course, all of the accessories involved work perfectly in every way.)
Others tell me, jail breaking is required to stop the nagging. I am not jailbreaking my phone. Please tell me there's another way.

It's not quite a bug.
The only reason it would reappear is if it loses the connection and then reestablishes it. It should never show up after appearing once and maintaining that connection. Presumably it i showing up because there is an incompatibility. If there is then I suppose it would make sense that it is struggling to maintain that connection.
In terms of getting rid of it there really is no way besides using an accessory that is compatible on Apple's terms. The same thing happens to me when I use my car dock. Do I really need to be told every time I get in my car that the same dock I have used for months is incompatible (yet still works 100% fine)? Absolutely not. But it's not something that can be disabled.
-SM

Does applecare cover water damage for iphone 4s?

does applecare+ cover water damage for iphone 4s?

Yes it seems so as the description says for up to 2 "incidents." Each incident is $49. More info here:
http://store.apple.com/us/product/S4575?mco=MjU5MTk4MjQ
Im still sorta thinking about it myself. You'd be basically spending $150 for incident #1 and $50 for incident #2, but during the next 2 years only.

TS1702 Has anyone else had this problem? Been waiting for 2 days for an app from apple store to install on my iPad. It just keeps saying "installing" have tried to update other apps at the same time and that happens is the app icons continue to display "w

I have been waiting for two days for an app to install on my iPad. Seems like something is stuck as it just keeps displaying "installing". Can not see where I can delete and start over and it's preventing me from updating or downloading any more games. Acts like a corrupt file or something. Can anyone help solve this problem? Thanks

Did anyone ever suggest you reset your PRAM?
http://docs.info.apple.com/article.html?artnum=2238
Also might want to try resetting the SMC, although I
doubt there's an issue there.
http://docs.info.apple.com/article.html?artnum=304123
I'm getting tired of people who supposedly know what
they're doing simply guessing that resinstalling the
OS might solve the issue. It's like trying to dissect
a frog with a sledge hammer, and wondering why you
didn't learn anything about anatomy in the process.
These sorts of things, although bizarre, should be
(and probably are) fixable without major surgery.
Thanks for the suggestion... but I think my first question would be why these parameters would need re-setting? This is a new machine... It has never been shut down hard. It is used at most 10 hours per week... mostly using Office 2004 for MAC. I need to figure this out as I will soon need it as a Cs2/CS3 - Aperture workhorse.
I too agree that it is best not to use a sledge when a scalpel is needed... but as a novice to the MAC world I may have been misled by Apple support. I seems to have fixed the symptoms ( some) but appears NOT to have addressed the cause... which is what I am after.
Would TechTool Pro detect a bad HD or RAM?
Thanks....

Anyone ordered/reviewed this full cover glass protector for iPhone 6?

Similar Messages

Maybe you are looking for