Anyone out there who might help with iPhoto/ slideshow/ music to youtube?

i'm basically a techno-moron but i've been able to figure out how to make a slideshow, add music, save it and upload to youtube. except that once it's on youtube, the music's no longer there. help?

Welcome to the Apple Discussions.
Was the music purchased from the iTunes sStore?
Regards
TD

Similar Messages

I am trying to install Adobe Premiere Elements 9 without success. I successfully installed Photoshop Elements 9 without a problem. The message I am getting is 'Invalid Unicode file - .\Autoplay\LangData\en_US\lang.dat'. Anyone out there who can help pleas

I am trying to install Adobe Premiere Elements 9 without success. I successfully installed Photoshop Elements 9 without a problem. The message I am getting is 'Invalid Unicode file - .\Autoplay\LangData\en_US\lang.dat'. Anyone out there who can help please?

click setup, not autoplay.

Re: Password Assistant -- "The Missing Manual" references such a beast, but I cannot locate it. I have ver 10.6.8. Anyone out there who can help?

According to The Missing Manual, Version 10.6.8 of the Mac OSX Snow Leopard system should have a password generating utility, called the "Password Assistant," which actually generates passwords for you. I've been unable to find this miraculous utility on my Mac, and seek enlightenment from the learned readers of this community. Anyone out there have some light to shine on my dark corner?

I think the "Password Assistant" they are specifically referring to comes up when creating or changing an Account's password. For example, go into your System Preferences Accounts. Select an Account. Click the Change Password... The sheet that drops down has a little key in a box. Click that. And a window with the title "Password Assistant" is displayed.
Example: Using Apple’s Password Assistant
Note, the Password Assistant can also be brought up from Keychain Access's New Password Item... menu. It brings up a sheet with a little key too.
Lastly, a little google searching flushed out a little app which apparently directly uses the built in OS X Password Assistant used by Change Password and Keychain Access. It's called, no surprise, Password Assistant and can be found here.

Anyone out there who can help me?

My itune 7.2 doesn't recognize a CD after the first one was copied........In other words it still has the CD it just finished even though it's been ejected..I put in a new CD to copy and it doesn't change from the CD i just copied....What can i do?

Are you copying CD's or importing them into iTunes to use on iPOD etc?
iTunes isn't relly designed to make exact copies of existing CD's you'd be better off using the burning software that came with the PC/CD writer

Hi there! yesterday I installed Mavericks on my Macbook. Since then, it doesn't mount my external hard disk drive anymore, which he did a week ago (without the update). Is there anyone out there who knows a solution?

Hi there! Yesterday, I installed Mavericks on my Macbook. Since then, it doesn't recognize my external hard disk drive anymore (at least not on the desktop. In Germany they call it "it doens't mount it". I don't know if it's the same expression in english?)
I just used it a week ago, before I did the update and it worked perfectly fine.
Is there anyone out there who knows a solution for this problem? I've been googleing for hours now and can't find any answer.
Thank you!!!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Is there anyone out there who cannot get into their e-mail through your internet providers address on your i-pad? I keep getting a 100 error code

Is there anyone out there who have come across a 100 error code by trying to log into their e-mail through their internet provider? The error code means that you are trying to log in from another country. Is there something wrong with the settings???Please let me know if there is an answer out there. thank you
Michele

As you can see below, when I right click, I have no such option. In the User Account Settings, I'm operating as the "System Administrator".
Any other suggestions?

HT4061 My iphone 4s remains in recovery mode permamently. Itunes wont restore it, constant messages of error 4013 keeps coming up on screen, is there any1 out there who can help before i crack up?

My iphone 4s remains in recovery mode permamently. Itunes wont restore it, constant messages of error 4013 keeps coming up on screen, is there any1 out there who can help before i crack up?

Hello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling

Any Slingboxers out there who can help me?

I have a new Slingbox Pro and it works with my network plug and play, but I can't get it configured for remote access. I have an Airport Express attached to an iMac, with a second Express acting as WDS. I plugged the SB into the WDS AE and as I said the setup worked fine. But no remote viewing. I have found lots of info on the SB board but none about this particular setup and none that has helped me make this work.
I suspect it has something to do with port forwarding... but not sure.
Anyone out there with experience who could lend a hand? Thanks.

Actually, I also figured it out -- it was pretty easy.
1) Make sure you have an Airport express (in my case, an Airport Extreme Base Station) connected to the internet.
2) A second AX is set up as a wireless bridge (i.e, to join the existing Airport network to extend the range of the AEBS).
3) Slingbox is connected to the ethernet port on the second AX.
4) Run the Slingbox Setup Assistant. An IP address (10.0.1.XXX) will get assigned to the Slingbox.
5) Using Airport Admin Utility, open up the AEBS and configure "Port Mapping" to forward public port 5001 to private port 5001 and in the space for the "private address" fill in the XXX from the IP address previously assigned to the Slingbox.
Go somewhere outside your network to check your connection; you should be good to go. The entire process was complete in under 10 minutes.

I just got a new ipone5c and i can't get the light to go out unless I turn it off. Have tried all the things I read anyone out there that can help me??

I just got a new iphone 5c this is my first smart phone. I have an Ipad so thought it would be easy.
I downloaded the new software don't know if this changed anything. I have only had phone for 4 days
but now the light won't shut off. I have to turn off the phone for it to go out. I did the holding down home
button and start button till apple shows up. I checked to make sure the LED flash for alerts button was off.
I don't know what else to do. Anyone out there have the same problem and have found an answer.
Thank you!

After powering the iPhone off and on, the light goes out but turns back on randomly or immediately after powering the iPhone on?
Since nothing else you have tried has resolved it, try restoring the iPhone with iTunes from the iPhone's backup first.
If no change after that, try restoring as a new iPhone or not from the backup.
If no change after that, the iPhone has a hardware problem.
Call AppleCare or make an appointment at an Apple Store if there is one nearby.

IS THERE NOONE OUT THERE WHO CAN HELP ME?!?!?

NAME:Christopher Benson
DATE:
import java.awt.*;
public class Coordinate extends Point// implements Comparable<Coordinate>
     public Coordinate()
          super();
     public Coordinate(int diffX, int diffY)
          super(diffX, diffY);
     public Coordinate(double diffX, double diffY)
          super.setLocation(diffX, diffY);
     public Coordinate(Coordinate temp)
          super(temp);
     public String toString()
          return "(" + this.x + ", " + this.y + ")";
NAME: Christopher Benson
DATE:November 3 2006
PURPOSE:
import java.util.*;
public class Polygons extends Coordinate
     private static final double DEG_TO_RAD = Math.PI/180;
     private int numSides, sides, sideLeng;
     private double rad;
     private Coordinate cntrCoor;
     private double radius;
     private double cntrlAngl, angle;
     ArrayList <Coordinate> Cords;
     public Polygons()
          int sides = 0;
          double sideLength = 0;
          double radius = 0;
          int centerAngl = 0;
     public Polygons(int numSides)
          int sides = numSides;
          double radius = 10;
          int centerAngl = 360/sides;
     public Polygons(int numSides, double radius)
          sides = numSides;
          radius = rad;
          cntrlAngl = 360/sides;
          Cords = new ArrayList <Coordinate> (sides);
          setCoordinates(cntrlAngl);
     public Polygons(int numSides, int sideLength)
          sides = numSides;
          sideLength = sideLeng;
          radius = 10;
          cntrlAngl = 360/sides;
          Cords = new ArrayList <Coordinate> (sides);
          setCoordinates(cntrlAngl);
     private void setCoordinates(double angle)
          double tempAng = angle;
          double xCor, yCor;
          for(int I = 1; I == sides; I++)
               xCor = radius * Math.cos(tempAng * DEG_TO_RAD);
               yCor = radius * Math.sin(tempAng * DEG_TO_RAD);
               Cords.add(new Coordinate(xCor, yCor));
               tempAng += cntrlAngl;
     public ArrayList <Coordinate> getCoordinates()
          ArrayList <Coordinate> temp = new ArrayList <Coordinate> (sides);
          Iterator <Coordinate> iter = temp.iterator();
          while(iter.hasNext())
               temp.add(new Coordinate(iter.next()));
          return temp;
     public void radius(double rad)
          radius = rad;
          setCoordinates(angle);
     public void setCenter(Coordinate center, int x1, int y1)
          ArrayList <Coordinate> temp = new ArrayList <Coordinate> (sides);
          Iterator <Coordinate> iter = temp.iterator();
          while(iter.hasNext())
               iter.next().translate(x1,y1);
     public void rotate(double degree)
          setCoordinates(degree);
     public double area(double rad, double cntrlAngl)
          double area;
          double apothem = rad * Math.cos(cntrlAngl/2 * DEG_TO_RAD);
          return apothem;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import javax.swing.*;
public class DrawCurves extends Frame
     CurvCanvas cBoard = new CurvCanvas();          // Create area/Canvas for drawings
    private ArrayList<Coordinate> drawPts;
    private boolean closedCurve;
    private int numSides;
    private String numSidesInput;
    public DrawCurves( )      // Default constructor
            setTitle("Curve Drawing");
            setSize(1600,1200);
            addWindowListener(new MyLocalWindowAdapter());
            cBoard.setSize(400,300);          // Note: size SHOULD fit in window
            cBoard.setBackground(Color.GREEN);
            add("Center",cBoard);
            getInput();
            setVisible(true);
    } // DrawCurves()
     private void getInput()
          numSidesInput = JOptionPane.showInputDialog(null, "Please input the number of sides that you would like to use for your polygon");
          numSides = Integer.parseInt(numSidesInput);
          Polygons poly = new Polygons();
          poly.Polygons(numSides, 20);
     private class MyLocalWindowAdapter extends WindowAdapter
          public void windowClosing(WindowEvent event)
               dispose();
             System.exit(0);
     } //inner class MyLocalWindowAdapter
        private class CurvCanvas extends Canvas
     // paint is the inherited method we should override in order to draw our own image in an AWT window
          public void paint(Graphics g)
               Point startPt, fromPt, toPt;
               Iterator <Coordinate> iter = drawPts.iterator();
               while(iter.hasNext())
                    fromPt = iter.next();
                    toPt = iter.next();
                    int fX = (int)fromPt.getX();
                    int fY = (int)fromPt.getY();
                    int tX = (int)toPt.getX();
                    int tY = (int)toPt.getY();
                    g.drawLine(fX, fY, tX, tY);
                    g.setColor(Color.RED);//          sets color of line to be drawn
                    g.drawLine(100, 200, 600, 700);//     draws line between two sets of coordinates.
         }//paint()
     } // class CurvCanvas
    public static void main(String[] args)
        new DrawCurves( );
}//DrawcurvesI need help getting it to allow me to draw what i have. It doesn't seem to be allowing me to use the polygons method polygons(int, int). As you can see it is already there and i have tried recompileing everything and it still gives me that same error. Maybe one of you out there can help me fix it. Thanks for the help
~Chris~

that was mean but yes a\i am sorry i multiposted b/c i thought this was more competitive for your expert opinions and advice . i realixe now that i was wrong and so i appologize. My ugency was only expressed so that if u had nothing else to do and thought that the person u were helping wasn't that interested and was buizy then it was su[posed to tell u that ur initial thought/assumption was wrong and that i would do anything u asked to get the aid u voluntarily provide so i thought it would be obvious that i was sorry because im not stupid enough to upset volunteers beccause they aren't the most dedicated when angry... well most of the time there not. So I am very sory and will do anything with in my power to help u help me ...Tahnks again for any help given.
~chris~

My MacBook has over 50GB of "other" stored on it. Is there somebody out there who might be able to tell me what that may be and how I can get rid of it?

When I click on the apple icon and go to "about this mac" and look at the storage on my computer, it tells me I have 50.46GB of "other" stored on my computer. The other categories are audio, movies, photos, apps, and backups. I wasn't aware that i'd put anything besides that on here. Please help!

The driver is one the Apple Mac store downloaded for me.
I attach the print summary which might give a clue. When converting
files to grayscale, I use Image>Mode>grayscale. The other thing is
that I can't print in Photoshop, so I do all my editing in Photoshop
and print through Indesign. Printing in Photoshop is just a page of
text.
The other odd thing is that coloured pdf files printed in Adobe
Acrobat are just a mass of colour, no recognisable picture but if I
change the print option in Acrobat to print in grayscale I get
pictures! I just feel I'm overlooking some checked option, but I've
tried to restore to default without success. I used to use Pagemaker
6.0 to do my newsletter on my PC but had to change to Indesign when I
changed to MAC and the printer hasn't worked properly since!!!
Many thanks for your reply. Maybe someone out there might be able to
help.

I need help with iPhoto slideshow. I can't "save" changes. Particularly the rotate feature. I rotate a photo 90 degrees... and the next time I play it...it's back to original. Sideways! Very frustrating.

How do I save changes on iPhoto slideshow. I rotate a photo... then it reverts back to original (sideways) next time it plays.

With the amount of information you've provided it's impossible to offer a solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
is your slideshow from an album or from the slideshow mode?
what theme are you using?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?

MacBook - problems with iPhoto slideshow music

Just got my brand new MacBook today and imported everything from old PowerBook. However now that I am trying to play a slideshow in iPhoto, the music to it will not play. Yet it will play in iTunes app itself, but not within the slideshow in iPhoto? Have downloaded all upgrades but still not working. Anyone got any suggestions? Thanks!

Apologies! It is now working just fine. I had forgotten to run Disk Utility Repair Permissions. It's been a long day setting up the new MacBook and my brain is addled!

After 2 years of trouble free use I can no longer access Facebook on my iPhone4 although I can access it on my laptop which is supposedly synced with my iPhone, anyone out there able to help please.

the clue is in the message title i.e. after two years successful and trouble free use I am suddenly unable to access Facebook on my iPhone 4 whereas I can still access it on my PC which I keep synced with my iPhone. Am I/have I done something stupid to make this happen ANY help would be appreciated.

Have you recently used any midi controller with Logic.. such as a hardware controller or even an iPad app.
If you used an iOS app, power down (Not just put to sleep) your iOS device and see what happens.. If that fixes it you are running an iOS controler in the background and so you will need to close it..
http://support.apple.com/kb/ht5137
Failing that, quit Logic and trash the Control Surface pref file.... restart Logic and see if that cures it..
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Delete the com.apple.logic.pro.cs file from the preferences folder.

TS1468 I am having trouble with two cover flows duplicating themselves more than once, is there anyone out there that can help me with this, they are not duplicated in my itunes library, just the ipod.

I am having trouble with two cover flows on my IPOD, duplicating themselves more than once, they haven't duplicated themselves in my Itunes library, just the ipod, could anyone have any ideas on how I could fix this problem. I have tried so many times, even if I restore the ipod, it still does the same thing. Please if possible email me at [email protected] with any suggestions.

Aha! I have sorted it.
For those with similar problems, the solution is this:
Macintosh HD > Library > Audio > MIDI Drivers
Then delete DigiDioMidiDriver.plugin

Anyone out there who might help with iPhoto/ slideshow/ music to youtube?

Similar Messages

Maybe you are looking for