Anyone Own a Samsung Galaxy Tab 10.1?

I was thinking of picking one of these up.  I noticed that it uses proprietary cabling but does hook up to an HD TV.  In other words, you can see your Galaxy monitor on a big screen.  One common complaint about camcorders is their small LED/LCD display.  Wouldn't it bee cool if you could hook up a Tablet like the Galaxy to your camera to get a bigger picture of what you're about to videotape?  The galaxy is a pretty clunky thing to carry around compared to a cell phone, but... one can make calls for free on the Galaxy as long as there is an available Internet connection.

Chuck,
Not looking good for the Samsung.
Just to fill time, until those Samsung users stop by, have to say that wife got the iPad (latest, but cannot recall the model), and loves it.
I, OTOH, am not so keen on the danged thing. Even with her add-on Blue-tooth almost QWERTY keyboard, I am just not comfortable with it, but then I am an "old timer," and more used to large, dual monitors, without any touch-screen functions.
On Web pages, I keep trying to touch the various dialog boxes, to activate them, only to find that my fingers are just too large, and probably too clumsy. Maybe I can learn - or maybe not.
Hope that those Samsung users come out of the closet, and help you.
Good luck,
Hunt
PS - if she cannot connect via Wi-Fi, she seems to be able to connect via 3G.

Similar Messages

  • I am planning to buy an ipad mini wifi 16gb because i really want a tablet with high graphics and high loaded games support so is ipad mini wifi 16gb best for gaming ? because i own a samsung galaxy tab 3 and it is worst even it lag and stucks !

    is ipad mini is capable to run high graphics and high loaded games with no lag and will not stuck while playing high graphics / loaded game ?
    tell me i want your suggestions !

    is ipad mini is capable to run high graphics and high loaded games with no lag and will not stuck while playing high graphics / loaded game ?
    tell me i want your suggestions !

  • How to install adobe reader on my Samsung Galaxy Tab 4.?

    I can't figure out how to install adobe reader on my Samsung Galaxy Tab 4.  Can anyone help? I want the free version.
    Thanks!

    Please see How to uninstall and reinstall Adobe Reader for Android.
    If you have not installed Adobe Reader for Android on the device before, you can just skip to the second section: How to reinstall Adobe Reader.
    Adobe Reader is a free PDF viewer.  You can view PDF documents, add comments (e.g. sticky notes, highlight, freehand drawing, handwritten signatures), fill out forms, add personalized bookmarks, etc.  Only extra features (e.g. converting from PDF to Word/Excel, converting from Word/Excel to PDF) require paid subscription services.
    Please let us know if you have any further questions about installation.

  • Adobe connect mobile use front camera on samsung galaxy tab ?

    hi all,
    im using adobe connect mobile on samsung galaxy tab
    but how to switch to front camera?
    already use lastest adobe connect mobile
    thanks before

    For anyone interested in the response to this, see Randah's comments at:
    http://blogs.adobe.com/adobeconnect/2011/03/adobe-connect-mobile-1-5-for-android-now-avail able-tablet-optimization-two-way-video-and-more.html

  • Ipad 2 or Samsung Galaxy Tab 10.1

    I have the money for either Ipad 2 or the Samsung Galaxy Tab 10.1, although I don't know which one!!!! Please help, give me opinion.

    If you can put up with the hideous iTunes as your interface, and can live with the walled garden philosophy of Apple, then the iPad 2. 
    If you want a more open platform, with the aboitly to customize it to your liking, then Android.
    I own both, and they both have merits and faults.
    If you find my post useful or informative, please click the icon below with the plus sign and star to give kudos. Thank you!

  • Videos on Samsung Galaxy Tab 10.1.

    I have the problem that Videos won't play on the Samsung Galaxy Tab 10.1. No difference if they are inline or full-format. Of course they are mp4 with .h264 encoding. I also tried the "handbreak" settings "Android Mid" and "Android High" with no success.
    Btw the Videos play well on the old Samsung Galaxy Tab GT-P1000 and on the 7.7.
    Has anyone figured this out?
    Thanks, Christian

    alright, I tried like 100 different things and here's something that works.
    I put my video in After Effects (so I guess you can do the same with media encoder, but at least here I'm SURE it works fine)
    Put your video in a 1280*720 comp
    resize it as you want inside the comp
    then render with these settings (ok it's in French but just transpose in the boxes)

  • Samsung Galaxy Tab Orientation/aspectRatio Bug

    Hi there,
    we developed an App and defined <aspectRation>portrait</portrait> in the descriptor xml.
    We also set:
    <autoOrients>false</autoOrients>
            <fullScreen>true</fullScreen>
            <visible>true</visible>
            <softKeyboardBehavior>none</softKeyboardBehavior>
    The Samsung Galaxy Tab 2 7.0 gt-p3110 with Android 4.2.2 seems to ignore this setting and so the app always crashes.
    We tested it with Android 3.7 and 3.8 beta.
    Perhaps this is also the issue why the App becomes rejected on Samsung Apps...
    http://forums.adobe.com/thread/1212455?tstart=0
    Best
    omi

    Its been awhile, but if I remember correctly the Galaxy Tab's default orientation is Landscape where as most devices, certainly phones, tend to have their default orientation as Portrait. So my code actually detects Portrait mode as:
    var isPortraitView:Boolean;
    public function setIsPortraitView():void {
        // Each device, for AIR or for Android, can choose either Landscape mode or Portrait mode as the DEFAULT.
        // This means there is no system property to check for portrait mode, so we'll create our own.
        isPortraitView = (stage.fullScreenWidth < stage.fullScreenHeight);
    The apps I work with auto orient which won't happen if you set the Aspect ratio to Portrait or Landscape - regardless of how the AutoOrient flag is set. Setting the aspect ratio to auto just removes the line entirely from the app descriptor file.
    So my app at start up determines and sets isPortraitView and then checks the stage.orientation property against it like so:
    // Interpretes the given orientation against the given aspect ratio
    public function getIsPortrait(orientation:String, aspectR:Boolean):Boolean {
         var view:Boolean = false;
         switch (orientation) {
            case StageOrientation.DEFAULT:
            case StageOrientation.UPSIDE_DOWN:
                 view = aspectR;
                 break;
            case StageOrientation.ROTATED_LEFT:
            case StageOrientation.ROTATED_RIGHT:
                 view = !aspectR;
                 break;
            case StageOrientation.UNKNOWN:
            default:
                 break;
         return view;
    Later when my app gets orientation change events I use the above method to decode them. Remember though that as the device physically rotates clockwise the orientation events are received counterclockwise - think of it as a bubble on a level.
    Also there can be a problem with apps not reporting their capabilities correctly when first starting up. So my code actually takes it one step farther and when first setting isPortraitView I also use it to correctly set internal properties for width and height like so:
    // Capabilities reports screen resX and resY based on the mode the app starts in
    if (isPortraitView) {
        screenResLandscapeWidth = Capabilities.screenResolutionY;
        screenResLandscapeHeight = Capabilities.screenResolutionX;
    else {
        screenResLandscapeWidth = Capabilities.screenResolutionX;
        screenResLandscapeHeight = Capabilities.screenResolutionY;
    Also lets say I have an app with a stage width and height of 600x400 on a device with a 1280x800 screen. I finally had to hardcode these values as some devices would report stage.fullScreenWidth as 600 and at other times report it as the device's screen width of 1280. So I recommend always having your app configure its own internal properties at startup and then have your code only refer to those properties. That way if there's a problem with your app receiving bad data it's much easier to isolate it and code a workaround.
    I hope that helps.

  • How can i print from samsung galaxy tab 10.1?

    I have a samsung galaxy tab 10.1 and i recently bought a HP Photosmart 6510 printer. Both are in the wireless network but I can't print from my tablet. Anyone has suggestions?
    This question was solved.
    View Solution.

    Hi,
    You may print by using the HP ePrint Home & Biz app, available from the Google Play store:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3795406&tmp...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Samsung Galaxy Tab wi-fi only version

    When will I be able to obtain a wi-fi only version of the Samsung Galaxy Tab from Best Buy?

    You can call 1-888-BEST-BUY and they can give you that information.
    In the mean time check out this tablet:
    Velocity Micro Cruz Tablet - Black
    Model: T105 | SKU: 1368034
    Play games, read books and more with this Cruz tablet that features an Android operating system that supports MP3 files, for listening to your favorite music. Access more than 2 million eBooks with the built-in NOOK eBook library application.
     3.4 Read reviews (17)
    Sale: $299.99
    Its a pretty good tablet. I seen it on a shopping channel, and the tablet detects when you turn it to the side so you can view in any way you want. 
    *******DISCLAIMER********
    I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

  • Wrk54g and Samsung Galaxy tab 10.1

    When I try to connect the galaxy to the wireless network, the tablet shuts down (to the start page, unlock page) when it is searching for the ip address for the network.  The firmware is 1.55.02. Cannot get upgrade as not available from Cisco. Anyone had this problem and found solution? Have disconnected all other devices from the network in case there is some interference problem.

    Does the problem is only with the Samsung Galaxy tab 10.1 or it happens with the other wireless devices? You can try out the following steps:
    # Open up the browser and on the address bar type 192.168.1.1 that will open up the Router setup page…
    # Then Click on wireless Tab and select you can make Standard Channel to 6, 9, 11... Click Save Settings...
    # Then click on Advanced Wireless Settings, change Beacon Interval to 75, Fragmentation Threshold to 2306, and RTS Threshold to 2307...
    Try out these settings once and then check the connectivity….

  • Samsung is calling Italian enterprises offering an Ipad Samsung Galaxy Tab 10.1. Can they do this? Why are they callin their product Ipad when they cannot? Is it legal?

    Samsung is calling Italian enterprises offering an Ipad Samsung Galaxy Tab 10.1. Can they do this? Why are they callin their product Ipad when they cannot? Is it legal?

    If they're actually calling it an "iPad" then no, it's not legal since "iPad" is a trademark (though who owns the trademark is currently in dispute). You can notify Apple's legal department here:
    http://www.apple.com/legal/contact/
    Regards.

  • Samsung Galaxy Tab 10.1 message error on ACV

    Hello !
    There's a folio I created with Indesign CC, viewer version 20.
    When I m'm on the Samsung Galaxy Tab 10.1; I load the whole folio, then the blue bar starts again ("Installation de l'element"/"Istalling element") and stops like at the middle, saying :
    "Impossible d'installer l'élément. Redémarrez l'application puis téléchargez à nouveau votrep roduit acheté"
    > "Impossible to install the element. Restart the application and then download again the prodcut you've bought".
    I don't understand what to do actuallly because I've even dleet the ACV and installed it again and each tiume I got the same message.
    What bugs me even more is that this folio is not different at all from another one I made witht the same properties only 2 days before.
    ANyone has a clue ?
    Thanx a lot

    Version 20? My guess is that folio is a later version. The app needs to be
    updated.

  • Kindle Fire VS Samsung - Galaxy Tab 2 7.0

    Can anyone give me some advice here? I am trying to decide whether the Kindle Fire or the the Samsung Galaxy Tab 2 would be a better choice for college classes. I want to be able to have my textbooks available on whichever one I choose, most of my books are available in Kindle version but the others are available in ebook only, not Kindle.  
    Solved!
    Go to Solution.

    Hello jsscac,
    The Kindle Fire is capable of reading other formats besides just Kindle books including .pdf and .doc files. With the help of Google Books, you should be able to read most e-Books on the market today.
    I would try the demos out at your local store to see which one feels best to you. It might be worth considering the full size Galaxy as well. It's a little bit more expensive, but if you have a lot of textbooks with pictures and graphs, the screen size might make all the difference.
    Hope this helps. Happy shopping!
    Douglas|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Unable to install Adobe Air on Samsung galaxy tab 3 10.1

    Hallo,please help me with installation adobe air app on my Samsung galaxy tab 3 10.1 android version 4.2.2

    Or ask directly in the Adobe AIR forum: http://forums.adobe.com/community/air/installation

  • Unable to use FiOS Mobile Remote App on Samsung Galaxy Tab 2

    I'm one of the holdout Blackberry customers who Verizon doesn't recognize as wanting apps anymore.  I finally broke down and bought an Android tablet device when I saw the FiOS Mobile Remote App and recognized it as an easy solution for controling my multiple HD STBs in my "Man Cave".  Unfortunately, the app has been completely useless.
    The app loads fine.  I'm able to register each HD STB with the app, however doing anything more than the initial set-up for the remote function results in a crash.  Every time I attempt to use it, I get the message "Unfortunately, FiOS Remote has stopped."  I will occassionally see the attempted connection displayed on the corner of my TV screen.
    All other functions of the app work, including the DVR function.
    I've reported this failure for months, using the handy little report button below the crash message.  No response.
    I've commented on this topic in threads from other users with the same problem.  No response.
    I've posted to the comments section of the Google Play store.  No response.
    Please, would someone from Verizon acknowledge this problem exists?  My best theory so far is that my tablet device is not on a Verizon data plan (WiFi only), so therefore Verizon isn't interested in supporting it (or this loyal customer). 
    Device is Samsung Galaxy Tab 2, 7.0, running Android 4.0.4.  All FiOs STBs replaced with latest generation.

    I am sorry to hear about the troubles you are having with the app. We try to make the app as compatible with all devices as possible. The full list of devices the mobile remote is compatible with is https://www22.verizon.com/OnDemand/unprotected/AboutFlexView.aspx   . You may find there may be devices that do work with it that re not on the list, but these are all verified working devices with the app. Since yours doesn't appear to be on the list, we can not gaurantee it will work. Submitting all the feedback has gotten word back to Verizon about the troubles you are having. You can also submit this to the Verizon Idea Exchange. Please search on the idea exchange and cast your vote. There may be another member who made the same suggestion. If not, please add a new idea so your fellow community members can comment and vote on your suggestion. http://forums.verizon.com/t5/Verizon-Idea-Exchange/ct-p/ideaexchange  . The Verizon Idea Exchange is there for you to submit your ideas and suggestions to Verizon so that we can consider them as we innovate our products and services.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Maybe you are looking for

  • IMovie 11 only imports one file at a time

    Recently, aside from the legendary stability issues (decent today, thank you very much) - I am working on a lenghty project with dozens of clips, but in the Import Movies dialog, no matter how many files I select, I only get ONE file. I have to go ba

  • Time Intelligence DAX functions are not working in Tabular model

    Hello, I've implemented a simple tabular model using SQL Server 2012 SP1 SSDT with a date dimension that  has an active relationship with the date key in the fact table and has met the criteria for a date dimension to the best of my knowledge, i.e. n

  • I do not like the new Smart Print, How can I get the previous Smart Web Print?

    Win 7 home ed. I have 3 computers. On one I have Smart Web Print.  It works great and is easy.  When I added the 3rd computer I was unable to get that feature and was given Smart Print.  I hate it.  It takes more steps and thn I don't always what I w

  • Problem with controls refresh

    Hi, I need help with multiple controls refresh.  There must be something I don't grasp with air development because I have multuple refresh problems in my app.  I try to assign values to a list of DropDownList controls.  I do this action in the TreeC

  • Cropping from 16x9 to 4x3, possible in FCE4?

    I look and look but can't seem to find the place in the manual that talks about this.. can I crop an HD wide video to 4 by 3 dimensions, taking the middle of the image like they do when they bring movies down to TV size? I have some productions under