Anyone recognize this font? Client gave us vectorized number set but not the font.
I'm building a flash app that has a lot of dynamic content so I need this font so I don't have to replace each number with a vector graphic. The client doesn't have the actual font and they do not know what it is.
Hopefully you can see this link - http://i.imgur.com/cLrca.jpg
Thanks in advance for you help.
Zak
Hi Tai Lao,
Thanks for the reply. Unfortunately all I have of the type is 0-9, "$" and a ",". And I just have vector graphics, not editable text whose font I can check. I looked at Russell Square but the numbers did not match.
Zak
Similar Messages
-
Anyone recognize this font?
The middle one, on the sword... can anyone identify this font? It dates back to roughly 1998.
Yes, but I very quickly made the background of the image black in Photoshop to make it work.
-Noel -
I am trying to re-produce this effect. I recognize the background effect called "ethereal" in the 'Synthetics" group, but not the rest. I am looking for the text effect that makes the ray of light shine through the text. Is that a plugin?
I would bet on Trapcode Shine.
-
Has anyone tried REAL VNC client for Mac OSX? Is it worth the money?
Has anyone tried REAL VNC client for Mac OSX? Is it worth the money?
you should not be getting that many crashes and unlike others here i don't see any strong reason to go to 7.2 other than to get to 7.2.1. i very strongly suspect you have dodgy AU's (probably around 218 of them) and if you have a look at your crash log it should show you why you are crashing. if you see an AU in the crash log it is telling you it is causing headaches. my guess is that upgrading is not going to solve your problems.
just so you know, if everything is running as it should be logic will hardly ever crash. post up the crashed thread from your crash log next time it happens. also make sure that you have the proapp kit latest version.
i know its deeply frustrating when things are going pear shaped. everyone but everyone feels that the stupid thing should just work and gets the over-whelming feeling that apple is supposed to make products that just work, that we paid good money for that level reliability and if it's going to act like this we might just as well have stayed with cheaper PC's. reality is, once you start throwing thrid party's into the mix it is really hard to keep control of reliabillity. if you took logic back to zero 3rd party plugs and in built audio, it would take fanatical fundamentalist to crash the thing. (having said that - i reckon i could) -
I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.
It's in your Keychain on the computer you usually use to connect to your network - the "kind" will be "AirPort Network Password".
Your Keychain can be opened by using the Keychain Access program. It is in your Utilities Folder.
Open Keychain Access, and type airport in the search field. You will see a number of entries. Choose the one with the name of your wireless network, open it, and check the box next to "show password". Before it reveals itself you will be asked for your login password - the one you use to log in to your MacBook.
The network password will appear in the box.
Quit Keychain Access. -
Hello! The question is this. In London, took the Iphone 5 as sim free, flew to Moscow put Simcoe, and he writes me that is locked to the operator O2. Can anyone encountered this problem? What to do? How to remove the Unlock?
<Edited by Host>Look at your receipt. Does it say unlocked? It is possible to purchase both locked "sim free" and unlocked iPhones from Apple.
ONLY the carrier an iPhone is locked to can legitimately unlock it.
IF your receipt says that it was supposed to be unlocked, and it is not, call AppleCare. They should be able to straighten it out. -
Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies. I even uninstalled and re-installed IE 11. It is still doing it. I am surprized that a company like Adobe would just ignore our posts and leave us hanging this this.
Error message is FAILED TO GET DISPATCH FROM IBRWSR2. Then when you click on it the next error message says: PHTML IS NULL. You have to click this error message twice and then the PDF finally loads. Happened every time
Does anyone have a solution since Adobe will not respond?
As a last resort I will try uninstalling the Adobe Reader XI and install Adobe Reader 10 instead. It seems to work ok. But when I try to install version 10 the Adobe site tries to install XI. Any ideas?
JimP08758It worked just fine for me.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart. -
The calendar typeface is so dim, I can barely read it. Name of days and date, but not the items I put in. Apple says they have no fix. Anyone else have this problem? Any solutions?
I agree and I found your post because I did a google search ical typeface dim.
If I find anything out, I will post back here. -
My PC recognizes one of my Nanos, but not the other
I have two Nanos. My computer and iTunes recognizes one, but not the other.
I have gone through all the trouble shooting steps on the second one, but it still doesn't register on my computer even though it shows the charging symbol.
I am stumped. Can anyone help>Download and run this utility. It should indicate what is wrong.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
I'm running the DNS server role on Windows Server 2012 R2 on a physical machine on my home network.
My AD is configured with a non-registered name - let's say it's "home.acme.ca" and the DNS server is configured to host that zone. I also configured a 2nd zone in the DNS server called "myinf.acme.ca". They both run on a physical
server with an IP of 192.168.1.10
The DHCP server on my Cable Modem is configured to hand out 192.168.1.10 as the only DNS server to every device on my network. On my servers (with static IP addresses), 192.168.1.10 is configured as the only DNS server available for them.
I took the DNS servers from my Cable Provider and configured a Forwarder on my server to send name resolution requests to them only if my DNS server can not answer the request - basically for any name resolution request that does not end with ".home.acme.ca"
or ".myinf.acme.ca"
The "home.acme.ca" zone is populated with 'A' records for all of the physical and virtual servers and PC's on my network.
The "myfin.acme.ca" zone is populated with 'CNAME' records that point directly to the 'A' record in "home.acme.ca" - for example, I have a serve named s000abc123ww.home.acme.ca with an 'A' record providing an IP address of 192.168.1.20 and
I created a 'CNAME' (alias) record named 'webserver.myinf.acme.ca' which points to the 'A' record 's000abc123ww.home.acme.ca'
2 of my 6 machines can resolve the alias but not the real name of the server!
.10 is the Domain Controller. All of the other machines (except .98) are members of the home.acme.ca domain.
I attempted to ping 's000abc123ww.home.acme.ca' AND 'webserver.myinf.acme.ca' on the following 6 computers. I used the fully qualified name in all cases.
4 of the below machines are able to resolve BOTH names. The other 2 can resolve the Alias but not the real name!
I don't understand how this is possible, but I would like to fix it...!!! Please help?
.10 - Server 2012 R2 (Physical) - Hosts Active Directory and DNS.
.20 - Server 2012 R2 (Virtual) - Runs SQL Server
.21 - Server 2012 R2 (Virtual) - Runs Apache
.22 - Server 2012 R2 (Virtual) - Runs Apache. This is the device I am trying to ping (s000abc123ww)
.98 - Windows 7 (Physical)
.99 - Windows 7 (Virtual)
.21 (which is configured nearly identically to .20 and .22) can resolve and ping the Alias, but not the real name.
.98 can also resolve and ping the Alias, but not the real name.
The rest of the machines can resolve and ping both the alias and the real name.
All of the Virtual Machines are running under Hyper-V on the .10 physical server.
All the devices are on the same subnet.
Thank in advance to anyone who can help me understand and correct this problem!
JimHi,
CNAME resource records are recommended for use in the following scenarios:
• When a host that is specified in an A resource record in the
same zone needs to be renamed
• When a generic name for a well-known server, such as www, must resolve to a group of individual computers (each with individual A resource records) that provide the same
service, for example, a group of redundant Web servers
Therefore please try to create your CNNAM record in the same zone and try again.
The related KB:
Adding, Changing, and Deleting Resource Records
http://technet.microsoft.com/en-us/library/cc779020(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
MDT 2012 U1. No problem with PXE booting so WDS is not the issue.
The NIC in question is the Intel I217-LM, which resides on both the new Dell Optiplex 9020 and the Latitude E7440. I downloaded the Dell drivers and then the Intel drivers and imported them into the WindowsPE drivers folder in the workbench. Updated
the boot images to make sure the new drivers were injected. Both yielded the same result. I can do everything I need to do when booting to the 64-bit LiteTouchPE_x64.wim boot image, but not the 32-bit version. When booting to the 32-bit
version, I get no IP configuration info at all.
When looking at the drivers in MDT, I see only one difference: the supported OS versions. The 64-bit driver supports 6.1, 6.1.1, and 6.2. The 32-bit driver supports only 6.1.1 and 6.2. Not sure if that's the issue.
Tried using drvload within 32-bit WinPE to manually inject the NIC driver. Still no luck. Ipconfig yields no configuration at all.
If I can't get these machines to boot to the 32-bit boot images, I can't deploy 32-bit images, unless there's a way of which I'm unaware.
EDIT: A little extra background. My WindowsPE folder has two subfolders called x86 and x64. Obviously, 32-bit drivers go into the x86 folder and 64-bit drivers go into the x64 folder. Then in the properties of the deployment share a
selection profile is selected which points to the architecture-specific folders.Specifically what do you see when you are in WinPE, press the F8 button, and run ipconfig.
1. ipconfig shows no network adapters (see:
http://myitforum.com/cs2/blogs/rpedersen/clip_image002_53DA17D4.jpg ). This means you still have not loaded the correct device drivers, check the c:\windows\system32\wpeinit.log file.
2. ipconfig shows an "autoconfiguration IPv4 Address" with a netmastk of 255.255.0.0. This means that the client did not get an IP address from the DHCP server. Double check the connection between the client and the DHCP server.
3. ipconfig shows a correct address. There is no problem. :^)
Keith Garner - keithga.wordpress.com
I get the first result. Absolutely no network adapters, which I assumed indicated no appropriate device driver.
This is the result of the wpeinit.log from the machine booting to the 32-bit boot image:
Info WPEINIT is processing the unattend file [X:\unattend.xml]
Info Spent 1747ms initializing removable media before unattend search
Info ==== Initializing Display Settings ====
Info Setting display resolution 1024x768x32@60: 0x00000000
Info STATUS: SUCCESS (0x00000000)
Info ==== Initializing Computer Name ====
Info Generating a random computer name
Info No computer name specified, generating a random name.
Info Renaming computer to MININT-TFRU2BT.
Info Acquired profiling mutex
Info Service winmgmt disable: 0x00000000
Info Service winmgmt stop: 0x00000000
Info Service winmgmt enable: 0x00000000
Info Released profiling mutex
Info STATUS: SUCCESS (0x00000000)
Info ==== Initializing Virtual Memory Paging File ====
Info No WinPE page file setting specified
Info STATUS: SUCCESS (0x00000001)
Info ==== Initializing Optional Components ====
Info WinPE optional component 'Microsoft-WinPE-HTA' is present
Info WinPE optional component 'Microsoft-WinPE-MDAC' is present
Info WinPE optional component 'Microsoft-WinPE-WMI' is present
Info WinPE optional component 'Microsoft-WinPE-WSH' is present
Info STATUS: SUCCESS (0x00000000)
Info ==== Initializing Network Access and Applying Configuration ====
Info No EnableNetwork unattend setting was specified; the default action for this context is to enable networking support.
Info Acquired profiling mutex
Info Install MS_MSCLIENT: 0x0004a020
Info Install MS_NETBIOS: 0x0004a020
Info Install MS_SMB: 0x0004a020
Info Install MS_TCPIP6: 0x0004a020
Info Install MS_TCPIP: 0x0004a020
Info Service dhcp start: 0x00000000
Info Service lmhosts start: 0x00000000
Info Service ikeext start: 0x00000000
Info Service mpssvc start: 0x00000000
Info Released profiling mutex
Info Spent 749ms installing network components
Info Spent 1669ms installing network drivers
Error QueryAdapterStatus: no adapters found.
Info Spent 0ms confirming network initialization; status 0x80004005
Info WaitForNetworkToInitialize failed; ignoring error
Info STATUS: SUCCESS (0x003d0001)
Info ==== Applying Firewall Settings ====
Info STATUS: SUCCESS (0x00000001)
Info ==== Executing Synchronous User-Provided Commands ====
Info Parsing RunSynchronousCommand: 1 entries
Info Command 0: 0x00000000
Info Successfully executed command 'wscript.exe X:\Deploy\Scripts\LiteTouch.wsf' (exit code 0x00000000)
Info STATUS: SUCCESS (0x00000000)
Info ==== Executing Asynchronous User-Provided Commands ====
Info STATUS: SUCCESS (0x00000001)
Info ==== Applying Shutdown Settings ====
Info No shutdown setting was specified
Info STATUS: SUCCESS (0x00000001)
At first I thought the first bolded section might be relevant, but when I booted to the x64 boot image, which works fine, I get the same message in its wpeinit.log file. The only difference between the two log files is that the x64 boot image actually
shows successful installation of a driver where the second bolded section is. -
Approve/Post Journal works in 32-bit, but not the web Client?
We have HFM 4.01 sp2 and sometimes when a user tries to approve/post a journal in the HFM Web Client they receive a security error (even though they have the post role and ALL access to the Entity), then they login to the 32-bit client and they can approve/post the same journal? Why?
Thanks,
TomThe user in question has all the security he needs. . . post journal role, ALL access to the scenario, entity, etc. or it wouldn't work in the 32-bit (windows) client either. I want to know why he received an error in the Web Client, but NOT the windows client?
-
I recently tried to use Photoshop CS4 that I have on my computer but I get the message:"Licensing for this product has stopped working." I have the serial number but not the media. How can I use this version?
You can get the installer here: Download CS4 products
It will install as a fully functional 30 day trial. Entering your serial number will convert it to a permanent version, Standard or Extended, depending on what serial number you purchased.
If you still have the license problem. get back to me with your OS details and the error code.
Gene -
Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
Thanks, John LeeLooking at the Konica web site for the PagePro 1300W, I saw the following note.
Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page. -
Trying to attach pdf files to emails I'm sending to myself. Instead of attaching the file, it copies the text. I want the file so I can have it on my iPad. I've been able to do this in the past, but not the last two tries. What am I doing wrong? Thanks.
You aren't doing anything wrong.
If the PDF is short enough, your iPad Mail app will display the text as part of the mail.
Actually it is still an attachment.
Tap and HOLD on the text and you should see options to "Open In..." that will allow you to open the PDF in most PDF readers such as iBooks, GoodReader, etc.
Maybe you are looking for
-
Service pack 13 of weblogic 5.1
I Unzipped the contents of the service pack into a temporary directory, such as /temp then Shutdown the WebLogic Server then Copied weblogic510sp13.jar and weblogic510sp13boot.jar from /temp to the directory /weblogic/lib. After this,I added the path
-
Index/Key Insert Design Question
Assume I am dealing with a customer object, and its properties which I'm attempting to insert into the database; one table called customer, with a key/index called id which is a unique number for each customer. As I understand it, this is a typical s
-
Properly display (HTML...) webpage
Hi, as I haven't found this (maybe you have)... (Maybe there's a better forum for this; please tell me where.) How can I properly display a webpage? Is there a way "through": JEditorPane.setPage("http://java.sun.com");or any other (swing)..., loading
-
Hi, can i transfer data from an internat table (ex: data begin of t occurs 0...) to a field-symbols table (field-symbols: <itab> type any table )? Thanx in advance. CV
-
How to use string Variables for data provider names
Really what I need to be able to do is insert the variable name in this: dataProvider="{chartXML2.lastResult.month.day}" I need to replace the "month" with a string variable name (i.e public var monthName = "January";) I also need to do the same for