Anyone seeing a nwdelmdm.sys blue screen error connecting to a jetpack?

Anyone seeing a nwdelmdm.sys blue screen when connecting to a jetpack?

Jetpacks do not require any software unless you are referring to a USB connection. If so then your Jetpack USB drivers have become corrupted and should be reinstalled. Id assume NW in nwdelmdm.sys is referring to Novatel Wireless.
If you have any other USB modem connection software or drivers you might want to clean them up too.

Similar Messages

Satellite A100 - sptd.sys blue screen error

Hello,
Hoping someone can be of help with this.
I have a Toshiba A100 with Windows XP Media Center Edition 2005.
When I try to boot up my computer, I get a message saying windows did not start successfully.
I am given the options of:
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration
Start Windows Normally
None of these options works. When I attempt Safe Mode, I get the following message:
multi(0)disk(0)rdisk(0)partition\Windows\system32. ...etc
This message repeats over and over again very fast, each time with a different .sys file at the end. Then, I get this message:
Press Esc to stop loading sptd.sys...
If I press escape, I get the following blue screen:
A problem has been detected and Windows has been shut down to prevent damage to your computer.
The problem seems to be caused by the following file: sptd.sys
The driver mistakenly marked a part of its image pagable instead of nonpagable.
I dont know what to do except for using the product recovery CDs and reformatting, but I cant afford to lose some of the data on my computer, and this would wipe it all.
Has anyone had experience with this? Any advice?
It would be much appreciated.

Hi
Seems the OS system or the partition, where the OS has been installed, is corrupt.
I have no idea why this happened but there are many different reasons for that
Anyway I think you have no other choice as to reinstall the OS using the recovery disk.
You would like to get access to the data on the HDD???
Well, you could remove the HDD from the notebook and could connect it as an external USB device to another computer. Then you should try to copy the data to another HDD.
That might help

Blue Screen Error - DRIVER_IRQL_NOT_LESS_OR_EQUAL (Netwbw02.sys) - Satellite Laptop

Hi, I have been getting blue screen errors the past couple days.
The error says: DRIVER_IRQL_NOT_LESS_OR_EQUAL (Netwbw02.sys)
Attached is the dump file. Let me know if you are able to open it. Any help would be appreciated!
https://onedrive.live.com/redir?resid=B6AB1143124F198F%21442

Which Satellite? There is a label on the bottom.
Bug Check 0xD1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Caused By Driver : fvevol.sys         <--- BitLocker Drive Encryption Driver
If you saw Netwbw02.sys mentioned, give us some more .dmp files.
==================================================
Dump File         : 020215-31750-01.dmp
Crash Time        : 2/2/2015 2:14:04 PM
Bug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug Check Code    : 0x000000d1
Parameter 1       : ffffd001`1c2c1000
Parameter 2       : 00000000`00000002
Parameter 3       : 00000000`00000001
Parameter 4       : fffff801`9eff6874
Caused By Driver : fvevol.sys
Caused By Address : fvevol.sys+15f6874
File Description :
Product Name      :
Company           :
File Version      :
Processor         : x64
Computer Name     :
Full Path         : C:\Test\020215-31750-01.dmp
Processors Count : 4
Major Version     : 15
Minor Version     : 9600
==================================================
-Jerry

Blue screen error 1gdpmd64.sys

I have a hp pavillion g7 notebook computer which keeps getting a bsod crash each time internet graphics are accessed. i have researched the error code and it seems to be a graphics driver issue. I downloaded a new version of the amd graphics driver from the hp website support and i tried to restore the computer to a previous point in time when the bsod was not occuring. All to no avail. the webpage graphics are not able to be displayed and the blue screen error keeps returning. In the device manager section of the computer, none of the icons are showing issues and i can't figure out what could be causing the problem. Any suggestions would be greatly appreciated. thanks

Hi beold,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are suffering from a BSOD. Can you provided more information on the error message that you are getting? Have you tried a different browser to see if the same error occurs. What is your product number? What operating system are you using?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Itunes blue screen error

I recently installed itunes from the disk that came with the ipod nano.
The problem I'm having is that when you open itunes with or without the ipod connected it crashed the computer. I rang apple and they said its a windows problem although they did suggest I download version 6 from their web site which I did and the problem still exists. I rang microsoft support and they said it was an apple problem
The problem doesn't happen all the time, around say 80% the computer shots down with a blue screen error message saying " A problem has been detected and windows
has been shut down to prevent damage to your computer.
PageFault_In_NonpagedArea
The technical information is:
STOP 0x00000050 (0xBB9EA29E,0x00000000,0x805-DA81,0x00000002) Then it
goes onto say beginning to dump physical memory, dumping physical memory to disk.
Can anyone help.
Regards

Hello,
I followed this recommendation for one of the other discussions to at least get the blue screens to stop for a while. So far so good. Try this to see if it helps. Make sure you sequence exactly or else blue screens will appear again. Good luck!
BE
Re: USB Device Not Regonized
Posted: Dec 26, 2005 8:11 AM in response to: Chaos Atheist Reply Email
I spent hours last night and today, when something simple actually worked!
If you've uninstalled/reinstalled recently, don't bother. The problem is probably the nano, NOT the computer.
Reset your nano. Move the hold switch until you see orange, then back again, lay it on the table and press the center of the wheel and menu at the same time and hold until you see the apple (6 to 10 seconds).
Then plug your cable into your computer's usb first, then connect the ipod to it. Wait. Hope it works for you

Blue screen error message on Satellite Pro A10

Hi,
I'm trying to help my inlaws with their Satellite Pro SPA10. I had set this up for them a few months ago and it was running really well.
Now it restarts about two seconds past the "use last good configuration" etc. screen, gets to this screen again then restarts immediately ad infinitum, never pausing on the error mesage for long enough to see what it says.
I managed to get it to boot from the windows XP home disc and got as far as the repair or continue with installation screen. When I asked the computer to do either it crashes to blue screen almost immediately. The error message is
*** STOP: 0x000000c5 (0x00000000, 0x00000002, 0x00000001, 0x8082B98B)
This is beyond my level of expertise, can anyone help?
Thanks

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

Blue screen error on resume, Sandisk U3 suspected

Hi all, I have a T61 running WinXP. I've noticed that whenever the machine goes into hibernation with my flash drive inserted it crashes with a blue screen error on resumption. The drive i a sandisk cruzer with u3. Wondering if anyone has experience with this or knows of a solution - uninstalling u3 is not ideal.
[updated 2008-11-04] I've done some quick tests to try to isolate what's causing the problem. I tried another flash drive (with u3) and the same problem occurred. However when I disable the u3 launcher the problem does not occur.
Thanks!
Message Edited by t61tt on 11-04-2008 04:41 PM

So long you use ATI driver from ATI support page there is no possibility to say anything about it.
This driver is not tested and Toshiba cannot offer any help about it.
So what you can do is to install OS again using recovery media and see what will happen in the future. Please test it intensively with clean preinstalled operating system. Don't install anything that can have some negative influence to this game or additional applications, codecs or something similar.
Test it please and let us know if the problem persists.
When you want to watch movies on TV at first switch to the TV and then start DVD player.

Blue Screen Error on Satellite A100-920 (PSAA9)

Hi
I had a blue screen error during normal use and after restart, Windows suggested updating the BIOS, so I updated it with the latest version (5.10). The next day, I got another blue screen and on restart, Windows suggested I update my display drivers, which I did (to ver. 8.241)... I have an ATI Radeon X1400 GPU. After doing that, the computer crashed every time it loaded windows, with a popup about services.exe telling me the computer would turn off in 60 seconds.
I assumed this was related to the display driver, so I replaced the drivers with an earlier-dated version (8.241-034065C). After I did this, it seemed to work and I could use the computer fine for a bit, even play games such as GTA but i am starting to get the blue screens again, usually just when opening folders, etc and not when running graphics-heavy applications. The problem definitely goes away when I disable my display drivers, but that's not much of a solution.
I turned off the reboot on error setting and this is the information from the blue screen of death:
*** STOP: 0x0000008E (0xC0000005,0xEE6DF5E9,0xBAD2F99C,0x00000000)
*** system32:huy32.sys - Address EE6DF5E9 base at EE6DD000, Datestamp 45abe717
Does anyone have any idea how I can sort this problem, it's driving me crazy!
I have downloaded the Omega drivers for the card, but am slow to install them as I hear they can cause overheating and I think ATI/Toshiba should be able to provide me with a solution without me having to use third party drivers.

I have Network Associates (McAfee) v. Enterprise 8. I ran a full virus scan with this and windows defender and a worm stinger utility and another microsoft app whose name I forget... all came up clean.
I tried the omega drivers out of frustration and they cause services.exe to terminate.
Could it possibly be a BIOS issue? I'm not sure how likely it is, since the computer definitely works with the display adapter enabled and will usually crash (BSOD) after anything from a few mins to a few hours with it enabled. I seem to be getting two types of reply from microsoft on restart, one saying there is a general driver fault and one saying there is a display driver fault and suggesting updating the display drivers.

Windows 7 Blue Screen Errors (with Apple Time Capsule)

Can anyone tell me whether Apple has found a way to make the Apple Time Capsule work with Windows 7 without causing a blue screen error every time it is used? BTW, it works perfectly on Windows XP and Windows Vista.
Note: The Apple Time Capsule does not yet support Windows 7 (see specifications).

Can anyone tell me whether Apple has found a way to make the Apple Time Capsule work with Windows 7 without causing a blue screen error every time it is used? BTW, it works perfectly on Windows XP and Windows Vista.
Note: The Apple Time Capsule does not yet support Windows 7 (see specifications).

Firefox keeps freezing, resulting in blue screen errors

Whenever I use Firefox, it runs just fine for about 10 minutes, then it stops responding, and doesn't work for 30 seconds to a minute. Sometimes when it does this, I go into Task Manager to shut down Firefox, and when it shuts down, my computer screen glitches up, then it instantly blue screens.
This problem started happening to me right when I updated from version 3.6 to 5.0 a few months ago, and now it does this on every version of Firefox I try using. Infact, version 3.6 doesn't work at all now, that version freezes the moment the browser opens, and sometimes blue screens as well.
Does anyone know why Firefox continuously freezes and give blue screen errors?
Also, the only extension I have running is Adblock Plus. The browser still freezes when I have Adblock disabled.

Wait so you are saying that if you update the BIOS prior to imaging, then you do not get the error? As part of practice, I always update the BIOS on a new system before imaging.
For removing drivers, you can use DISM after mounting your image.
DISM /IMAGE:c:\folder\mount /GET-DRIVERS
This will show you a list of drivers. If you have more drivers than the CMD console can show, you may want to send the output to the text file. Information format will show the original INF name, the version and the "new" file name as it exists
in the image. When removing a driver you need to specify this "new" name, for example oem53.inf.
Dism /Image:C:\test\offline /Remove-Driver /Driver:OEM53.infThen unmount /commit changes.See here for documentation.
http://technet.microsoft.com/en-us/library/hh825070.aspx

Satellite A300D-1EI - blue screen error - display drivers had failed

I 've bought my laptop a month ago.
Everything is working great except two "blue screen" errors caused by the graphics card.
Both were when the laptop was connected with TV through S-video port.
First was when the laptop display turned off after 15 minutes while watching a movie, on resume said that display drivers had failed and then I got the blue screen. Then I updated the display drivers from ATI's website and set the laptop display not to turn off.
All were ok with no problems, until last night when I got another message that display drivers had failed followed by a blue screen.
I am wondering if this is a driver's problem or is something wrong with my graphics card.
System Info:
Processor: Intel Core 2 Duo CPU T8400 @ 2.26 GHz
Memory (RAM): 3.00 GB
System Type: 32-bit Windows Vista Home Premium
Display Adapter: ATI Mobility Radeon HD 3470

So long you use ATI driver from ATI support page there is no possibility to say anything about it.
This driver is not tested and Toshiba cannot offer any help about it.
So what you can do is to install OS again using recovery media and see what will happen in the future. Please test it intensively with clean preinstalled operating system. Don't install anything that can have some negative influence to this game or additional applications, codecs or something similar.
Test it please and let us know if the problem persists.
When you want to watch movies on TV at first switch to the TV and then start DVD player.

Lenovo N 500 Blue Screen Error

I just purchased this laptop in February and shortly thereafter I started to get the blue screen error message. It only happens after the screen tries to wake up from hibernation. I have not been able to turn hibernation off.
The system has Windows Vista Home Basic; Version 6.0; Build 6001P1
Any help would be greatly appreciated. I just don't know what to do and when I tried using the lenovo care, it said that the update service would not be available until May. This is already the middle of May.
Thank you
Message Edited by WLove on 05-17-2009 08:03 PM

you can see the error properly if you disable this option
just uncheck the option.you can get this dialog box if you go to advanced system properties
Its not an easy thing for me as well,you may get solution for your BSOD in micrsoft support. thats why i was asking for more info regarding your error
Message Edited by vijaysaradhi on 05-18-2009 11:35 AM
Message Edited by vijaysaradhi on 05-18-2009 11:36 AM
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

BLUE SCREEN ERROR!!! - Stop: 0x00000124 (0x00000003 0x00000000 0x000000000 0x00000000)

hi,
When i restart my Windows 2008 R2 server,suddenly a blue screen appeared. In the screen the message was like,
System malfunction call your hardware vendor for support. After getting this message i gave a force restart but while booting
i got another blue screen error in which i got the below error code
Stop: 0x00000124 (0x00000003,0x00000000,0x000000000,0x00000000) and after dumping physical memory(100%) the system is keep on restarting as it happened before with blue screen.
In the server machine LCD display i am getting another error message like,
E1716 Chipset IERR. Bus 0 Dev 20. Function 2 . Review &. clear SEL.
Can anyone help me to understand the actual problem and how come i can resolve this?...

This from the Dell web site.
The system BIOS has reported a chipset internal error that resides in bus ##, device ##, function ##.
Check the SEL for more information, and then clear the SEL. Remove AC power to the system for 10 seconds, and restart the system (SEL = System Event Logs)
So I probably contact the hardware vendor.
http://msdn.microsoft.com/en-us/library/windows/hardware/ff557321(v=vs.85).aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Satellite Pro A300 shows blue screen error 8086...

Hi,
today laptop produced a Microsoft error message (Didn't see what it was) and it said to restart laptop.
On restart blue screen error message appeared. 0x00008086
Thanks
Paul

Hi
Did you get this BSOD only once as yet?
Maybe its just a driver issue so check the device manager for any problems.
Normally BSODs are related to RAM or HDD. You can test both components using a special test tools like Memtest86 and Drive Fitness Test. You can use Google to find both freeware programs.

Blue Screen error using Boot Camp when installing XP on the MacBook Pro

I have been trying to install Windows XP Professional (with SP2) on my MacBook and I keep encountering blue screen errors during the install. I successfully create the Windows partition with Boot Camp (v2.0) and then Windows install begins. However, during the setup process it hangs and then eventually throws an error showing a blue screen. There has been a different error each time I've tried to install. I've booted in OSX and then deleted the Windows partition through Boot Camp and then attempted the process from the beginning five separate times and each time I get an error during the initial install phase.
Its not a matter of the installation CD because i borrowed 3 differnt copies from some friends and i still have the same issues.
Once, I managed to actually start windows XP however it was full of errors probably as parts of it weren't properly installed due to the the blue screens that made me reboot several times.
Am I the only one having this problem??
Is this a matter of the hardware? Can you think of any possible solution?
(I used NTFS did everything propperly I'm 100% sure)(I tried FAT as well)(still nothing)
PLEASE HELP

Can you read and write from your optical drive? I would have it checked by burning something to it and seeing if it can be read.
I have noted a link, with some information that may be helpful, for you to check out.
http://discussions.apple.com/message.jspa?messageID=7872477#7872477
I would repair permissions before your next attempt too.
If this fails, I would contact Apple.

Anyone seeing a nwdelmdm.sys blue screen error connecting to a jetpack?

Similar Messages

Maybe you are looking for