Anyone seeing pastes as html instead of plain or formatted text?

I am being assisted by Microsoft here - but thought this may be a conflict problem so am posting here: Has anyone experienced this:?: In MS Word (2008 or 2011) when copying text in a document and then pasting, the pasted text is all html - blue and underlined and with some link.
This happens essentially ALL THE TIME now - and the initial "things to try" with MS have not cured this. The fact that it occurs with MS Word 2008 and 2011 (I have both on my MacBook Pro-13" May 2010 version running 10.6.6). I believe this started with MS Word 2008. I've not yet tested Excel and Powerpoint -but believe I may be seeing this with Excel as well. NO - SOME TESTING JUST NOW DOES NOT SHOW THIS AT ALL IN EXCEL 2011.
And when I copy some text from somewhere else (like this message) and then open a doc in Word and paste it- it pastes fine. But not when I take an existing doc and copy paste.
Any comments (or cures!) really appreciated. Again, I'm getting good, personal support from Microsoft - but my Mac is very personalized with startups programs and haxies and more––– I thought someone may have had a similar experience and could help.
Best regards,
Steve Schulte
Thursday 20 January 2011

I'm replying to my own post here because I may have found the answer-- It seems that CopyPaste Pro 2.3.3 is causing the conflict / problem with MS Word - causing it to paste html instead of regular or formatted text.
For the moment, I've reinstalled CopyPaste 2.2.7 and this does not seem to have the same problem. I just think Apple should include multiple pastes as a standard part of the OS. OK I'll write to them on that point.
Note that I will keep this post open a few more days in case the problem is more complex - i.e. that CopyPaste is conflicting with another (of my many) shareware programs which is then together causing the WORD paste problem -- but I don't think it is that complicated. Let's see what the CopyPaste team says.
Best regards,
Steve Schulte
Thursday 20 January 2011

Similar Messages

How do you set email so that it is in html instead of plain text on ATT email?

I would like to view my emails in html but do not know how to change it off of the current settings where it always displays it in plain text. I have att yahoo email.

The Alt attribute isn't meant to show as a tooltip on hover.
The Alt attribute is meant to show if the image isn't or can't be displayed.
The title attribute is meant to show if you hover an image or link.
*http://kb.mozillazine.org/Image_tooltips_do_not_work
Some extensions can interfere and disable the tooltip.
* [[Troubleshooting extensions and themes]]
* http://www.w3.org/TR/html401/struct/global.html#title title
* http://www.w3.org/TR/html401/struct/objects.html#alternate-text
*Popup ALT Attribute: https://addons.mozilla.org/firefox/addon/1933

KNOWN ISSUE: HTML Messages with plain-text signatures

To get around the EAS security policy issue, I'm having non-sensitive emails from work forwarded to a GMail account from a redirect set up in our corporate OWA. The redirect seems to send the messages to GMail without any issues; formatting is 100% intact, and in the GMail web client as well as Thunderbird, Entourage, etc., HTML emails with plain-text signature attachments show the plain-text message inline with the rest of the formatted message. All of our internal mailing lists have these plain text attachments that say where the message was coming from (Message sent from [email protected] by listserv). These get affixed to every message, both plain text and HTML.
Here's my problem: The Pre's email client handles both plain text and HTML messages beautifully. But, when I receive a message from a mailing list with a plain text attachment, the HTML portion disappears, and all I see is the signature.
Is there any way to make the Pre show the HTML INSTEAD of the plain text? I can live without the sig, I know where the messages are coming from already. But if I can't read the message, it's useless. I've only begun researching this and so far Google hasn't been much help, nor has searching these or other forums. Any help would be appreciated.
Palm Pre P100EWW
Post relates to: Pre p100eww (Sprint)
Message Edited by HowellBP on 06-16-2009 04:13 PM

1-51626418773
I just got off the phone with Palm Support. Apparently this is a bug in the mail application. It currently does not support parsing both HTML and plain text in the same message. It will read EITHER plain text OR HTML, but not both at the same time. This will be fixed in a future update.

I use Numbers on my iMac. Now it says I need an update to do anything, even see past projects. Numbers 3.1 was installed on my mac on 1/25/14. Can you help?

I use Numbers on my imac. Now it tells me I need an update. It no longer allows me to even see past projects. Numbers 3.1 was installed on my computer on 1/25/14. Can anyone help?

A CAUTION
The article linked in YeOldMacFan's post gives the basic information. I would place some emphasis on these statements from the last two paragraphs:
"If you have no further need for the older version of the iWork application or the iWork suite on your Mac, you may delete the the application or the iWork suite by dragging the application or the iWork folder to the trash."
"[Keeping both versions] allows you to maintain consistent versions when collaborating with other people who may not have the latest iWork suite."
Collaboration with other people is not the only reason for keeping both new and old versions of Numbers (or Pages of Keynote) available.
The current versions were developed with the goal of improving compatibility between iOS, OS X and iCloud transferability of files, and many features supported in the '09 versions of these applications are NOT supported (yet) in the new versions. If you need these features for your work, then you still have a need for the older versions.
Any file opened, then saved from the new versions cn no longer be opened in the older version. Unsupported features may be removed on importing he file into the new version. The file may be exported from the new version as a Numbers '09 file, which may then be opened in Numbers '09, but unsupported features removed in the import to Numbers 3 will not be restored in the export.
Use your own judgement as to whether to keep of delete Numbers '09. My choice would be to keep it.
My personal choice has been to delay installing the new versions of Numbers Pages and Keynote until support for more of the 'missing' features has been restored.
Regards,
Barry

Raw HTML data in reply box instead of formatted text when using forums or webmail interface

At work, we use an internal webmail service with SmarterMail Enterprise 5.5 to communicate. Since upgrading to FF6, the reply text area no longer shows formatted text, and instead just shows the raw HTML code of the message you're typing. The size of the message box area is also reduced to about half what it used to be.
Text formatting also does not function on several message board forums around the internet. Seen many others complain about the same.
This did not happen in Firefox 5, and does not happen now in Chrome or IE8. Something about FF6's handling of webmail interfaces and forums or the handling of an extension that affects a webmail interface or forum is off.
Any help?

AFAIK, no. Acrobat/Reader will only generate plain-text emails.

I get a dump of HTML instead of a POPUPKEYVALUE contents while running app.

Hi, Many times I get a dump of HTML instead of a POPUPKEYVALUE contents while running the app.
If I reload the POPUP it fills with the choices as it should have.
I have had no complaints from Users though so I think it is just dev area.
HTTP/1.1 200 OKDate: Thu, 11 Sep 2008 21:58:00 GMT
Server: Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server
Content-Length: 22257
Content-Type: text/html; charset=UTF-8
etc...

Hi John,
Actually I have had no complaints from anyone else about this. Just me.
It may be just in DEV mode?
I am the only one using Firefox because we do not officially support it even though I develop with it.
Haven't checked webserver logs, I'd have to find out who to contact.. I'm a contractor working from San Antonio and the servers are in Memphis.
It is random.. this morning I just accessed a table in Home>SQL Workshop>Object Browser-clicked Data--clicked Query and got what I was suppose to..
Yesterday when I posted this I would get to the data but as soon as I -clicked on "Query" I would get the dump. I tried several times and never got it to give me the "Query" selection form.
Using Firefox version 2.0.0.14
Thank you, Bill

Can anyone see my problem?

I am using the following code and the value of {contact_type}
for the record I am using to test is "Past Client". I put the 2's
in the values to see if the code is working. It seems to be
writting the correct items to the dropdown, but does not select the
correct item (Past Client2). I can't seem to figure out why it is
not working correctly.
Here is what is displayed in the dropdown:
Present Client
Past Client2
Colleagues
Associates
Vendor
So it Shows the correct items in the drop down, but the
"Present Client" is selected when the form loads the dataset and it
should have "Past Client" selected instead.
Here is the code:
<select name="contact_type" id="contact_type">
<option spry:if="'{contact_type}'!='Present Client'"
value="Present Client">Present Client</option>
<option spry:if="'{contact_type}'=='Present Client'"
selected="selected" value="Present Client">Present
Client2</option>
<option spry:if="'{contact_type}'!='Past Client'"
value="Past Client">Past Client</option>
<option spry:if="'{contact_type}'=='Past Client'"
value="Past Client" selected="selected">Past
Client2</option>
<option spry:if="'{contact_type}'!='Colleagues'"
value="Colleagues">Colleagues</option>
<option spry:if="'{contact_type}'=='Colleagues'"
selected="selected"
value="Colleagues">Colleagues2</option>
<option spry:if="'{contact_type}'!='Associates'"
value="Associates">Associates</option>
<option spry:if="'{contact_type}'=='Associates'"
selected="selected"
value="Associates">Associates2</option>
<option spry:if="'{contact_type}'!='Vendor'"
value="Vendor">Vendor</option>
<option spry:if="'{contact_type}'=='Vendor'"
selected="selected" value="Vendor">Vendor2</option>
</select>
Why would it write the correct item in the list box but not
follow the select="selected" part???

Hi,
If its for a week than I won't bother. Probably you should try to get teh same report for these wait events in a much smaller period , like 20-30minutes of time period when your db is fully operational. If still at that time the wait events,these or any other, shoot up to high wait times, things can be investigated more deeply.
HTH
Aman....

Anyone see any tinge at the bottom of the screen?

In my room where I'd be using it most:
http://img695.imageshack.us/img695/7835/defaultdarkbgcenterfocu.jpg
Another in my room, just took this tonight with room lights off, full brightness.
http://img196.imageshack.us/img196/7715/photo6ut.jpg
Comparing to store model...
Mine:
http://img194.imageshack.us/img194/1673/photo1ly.jpg
The store model:
http://img192.imageshack.us/img192/8339/photo2uar.jpg
The above were taken with an iPhone 4, sitting side by side. The difference is more obvious if you open the two in separate tabs in your browser and switch between the two.
Anyone see anything not right with the screen? Yellow hue or otherwise not right?
It's a bit hard to tell for me to be honest but there might be some tinge, yellow or just plain darker than it should be. When I see the store model, I think there is a noticeable difference. I even physically swapped the two around and it still showed the same. The one that shows something more apparent is the first photo in my room. These are all using the default color profile. Wondering if it's worth getting a replacement since I'm allowed to but fear the next one could be worse in some way (dead/stuck pixels, more tint, or other problems).

I think your pictures are wrong...
Mine:
http://img194.imageshack.us/img194/1673/photo1ly.jpg
The store model:
http://img192.imageshack.us/img192/8339/photo2uar.jpg
These both show the same computer.
I'm assuming the first two photos are of your computer and the second two photos are of the store computer.
Two majors things to point out right off the bat... the lighting conditions are completely different. Your computer is in the dark. The store computer is under the very bright conditions of the Apple Store.
Second, your computer has a glass screen, the computer you took pictures of at the Apple Store has a matte screen.
I would recommend bringing your computer in to the Apple Store and taking side by side pictures, so we can see both screens in the same photo under the same lighting conditions. And please choose another glass screen model.

I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

I imagine your clients must be using Outlook, which is seriously broken when it comes to e-mail standards, especially HTML e-mail. You can work around the issues with Outlook by only sending plain-text e-mails and making sure that, in the Edit -> Attachments menu, the last two options are checked. Unfortunately, that means that HTML signatures are out.
If you need something with a fancy layout, either attach a PDF file to the e-mail or include a link to a website in the e-mail.

How To See Numbers In Arabic Instead Of Indian Format

I want to see numbers in Arabic format not in Indian format when i log on the Arabic Interface .
I have EBS (12.0.6) installed on Linux centos , I have implement the below Oracle Metalink Note to solve this issue
How To See Numbers In Arabic Instead Of Indian Format [ID 785243.1]
I installed all the patched mentioned in the note (Apply forms version 10.1.2.2.0 with the forms patch 7488328 , Apply patch 7207440:R12.TXK.A , Apply patch 7601624 - NEW PROFILE OPTION: FORMS DIGIT SUBSTITUTION)
These patches add the Profile option (FORMS DIGIT SUBSTITUTION) , but when i try to used it has no effect at all .
So kindly if you have any idea about this issue please help me.
Regards
Fadi Lafi

Hi,
These patches add the Profile option (FORMS DIGIT SUBSTITUTION) , but when i try to used it has no effect at all .At what level you have set this profile option?
So kindly if you have any idea about this issue please help me.Have you bounced the application services after setting this profile option? If not, please do so, login again and see if it works.
Thanks,
Hussein

Anyone seeing a nwdelmdm.sys blue screen error connecting to a jetpack?

Anyone seeing a nwdelmdm.sys blue screen when connecting to a jetpack?

Jetpacks do not require any software unless you are referring to a USB connection. If so then your Jetpack USB drivers have become corrupted and should be reinstalled. Id assume NW in nwdelmdm.sys is referring to Novatel Wireless.
If you have any other USB modem connection software or drivers you might want to clean them up too.

How do I allow new users to see Past instances of Publications.

I need to allow new users to see past instances of Publications, i.e. instances they weren't subscribed to. The only way I seem to be able to do it is to make them Administrators. There are Publication Rights called "View objects" and "View document instances" but they don't seem to do what I need. "Full Control" doesn't work either.
I guess the key question is, what right do administrators have that allows them to see all instances of a publication and how do I give that right to ordinary users?

Hi Robert,
have you tried to give your users also the "View document" and "View document instances" rights on the original documents (reports) which are contained in the publication?
Regards,
Stratos

JasperReportIntegration tool - Report coming back as HTML instead of PDF

Using:
* Apex 4.1.1 (using EPG)
* 11G SE
* Apache FOP as print Server
* Dietmar Aust's free tool on integrating JasperReports
I've recently created a second APEX instance locally (from externally hosted instance) and copied the application (via application export) and parsing schema (using exp/imp). Everything works fine except when I try to print reports (for JasperReports) it comes up as garbled HTML instead of PDF.
In my hosted instance it all works fine.
Since the necessary packages to integrate with Jasper reports goes into the parsing schema for application, all necessary objects are imported as well during the exp/imp.
The only thing different about the hosted and my local instance is that the hosted one is XE where as my local one is SE but I don't think this is a factor at all.
The other difference is the hosted instance uses Apex Listener while mine doesn't. Again don't think this a factor as well.
My print server is enabled and working and I can print tables as PDF reports.
I am not sure if I need to enable something or missed a step needed so the reports come up as expected as is the case in hosted instance. Any hints or suggestions welcome.
Cheers.

Hi Dietmar, I couldn't do it as I couldn't find that line I needed to modify. The XLIB_HTTP package goes upto line 45 and those lines referred in that post goes upto 89,90.
But then I was due to change from EPG to Web Server + Apex Listener (for other reasons) which in turn solved my issue anyway.
create or replace PACKAGE "XLIB_HTTP"
AS
/*=========================================================================
$Id: xlib_http.pks 21 2010-01-07 07:41:27Z dietmar.aust $
Purpose : Make http callouts
License : Copyright (c) 2010 Dietmar Aust (opal-consulting.de)
             Licensed under a BSD style license (license.txt)
             http://www.opal-consulting.de/pls/apex/f?p=20090928:14
$LastChangedDate: 2010-01-07 08:41:27 +0100 (Thu, 07 Jan 2010) $
$LastChangedBy: dietmar.aust $
Date        Author           Comment
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
19.02.2007 D. Aust          initial creation
07.08.2008 D. Aust          added check_get_request
                              display_url_raw: pass all request headers
                                 to the client
=========================================================================*/
   c_success   CONSTANT CHAR (1) := '1';
   c_fail      CONSTANT CHAR (1) := '0';
   PROCEDURE display_url_raw (
      p_url                       VARCHAR2,
      p_mime_type_override   IN   VARCHAR2 DEFAULT NULL,
      p_charset              IN   VARCHAR2 DEFAULT NULL
   PROCEDURE retrieve_blob_from_url (
      p_url               VARCHAR2,
      o_blob        OUT   BLOB,
      o_mime_type   OUT   VARCHAR2
   FUNCTION escape_form_data (s VARCHAR2)
      RETURN VARCHAR2;
   FUNCTION check_get_request (p_url VARCHAR2)
      RETURN CHAR;
END;Edited by: Arc_x on 11-Sep-2012 21:17

HTML instead of text for the worksetItems of the SAPUI5 Shell

How to put HTML for the worksetItems?
Now, it is only text (example with the dashboard title):
worksetItems: [new sap.ui.ux3.NavigationItem("WI_home",{key:"wi_home",text:"Dashboard"}),
Do you know how to put HTML instead of text?
I need it to to put an image next to the title with the font :
<span class="icon-statistics"></span>
Vincent

Hi Vincent,
worksetItems accepts only aggrgetion of type sap.ui.ux3.NavigationItem[]
css could be applied for the id of the worksetITem
like
<style>
#WI_home {
background-color: green;
</style>
an example
JS Bin - Collaborative JavaScript Debugging</title> <link rel="icon" href="http://static.jsbin.…
Thanks and Regards, Venkatesh

I am trying to make a signature in MS Word (2007) which includes a jpg image, but when I save it as a HTML file and attach it the text appers OK but the image doesn't. I have tried various formats but still no luck. Can anyone help?

I am trying to make a signature in MS Word (2007) which includes a jpg image, but when I save it as a HTML file and attach it the text appers OK but the image doesn't. I have tried various formats but still no luck. Can anyone help? edit

C'mon! Anyone???? I'm desperate!

Anyone seeing pastes as html instead of plain or formatted text?

Similar Messages

Maybe you are looking for