Anyone setup a new Time Capsule or AEBS yet?

I'm curious if anyone has set up one of the new TC or AEBS up yet? I hope someone can do a comparison of the new/old versions.

Apple cover the TC via your computers Applecare.. if you have any.. it will also cover the TC.
At less than 2years old ring and ask.. as Apple is forced to extend warranty in many places.
Or you can buy an Apple TV, in many places with apple care happens to cover the TC as well. This is well worthwhile.. you can sell off the ATV without even opening it.. and just use the applecare to get the TC replaced.. but watch all the rules and caveats..
This particular kind of failure seems to afflict the Gen4 TC.. I do not know what is wrong because I have never been able to make it happen on my bench.. the one Gen4 TC I got with the problem.. came back to life after I pulled it apart, measured all the voltages and put it back together.. and hasn't skipped a beat since. If you are a DIYer.. and cannot use any of the warranty methods talk to me.. as I can point out what to measure.. and heck .. who knows .. it might just need a full strip down, grease and oil change and good as new.

Similar Messages

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

Optimal Setup for New Time Capsule with Wireless AC

I'm curious to see what the hypotehtical optimal setup for my Time Capsule. I understand that wireless speeds depend on a ton of factors and that part of getting the best connection is just trying different options. I have a new Time Capsule that's connected to the following devices: iPhone 5S; new MacBook Air with wireless AC; old iMac from 2007; old AirPort Express that only supports b/g and a newish Apple TV that supports wireless N, I believe. I was connecting to the network (which was not designated with the 5ghz) and I recently chose the option to label the 5ghz. I'm using that now to stream music with the new iPhone and the Apple TV with no problems, but I have no longer have the option of using the old Airport express because it's an old one. I'm thinking of just getting a new Airport Express and leaving it at that, but wanted to know if anyone has some thoughts on this. I'm sure there's a more concise and direct way to ask this question, but my knowledge is pretty limited here. Thanks in advance.

The Time Capsule is already set up for optimal performance when you open up the box.
You can assign a separate name to the 5 GHz network and point devices that are capable to that network. This works well if the device is located close to the Time Capsule.
But, 5 GHz signals are much weaker than 2.4 GHz signals, so once you move a room or two away, or the signal has to pass through several walls, the 2.4 GHz will be stronger.....and probably faster as well.
But...your device will try to stay locked on the 5 GHz network since you set it up that way.
This type of setup may or may not work best for you. For most users, it is simpler and more effective to use the default settings on the Time Capsule to have both bands use the same network name.
Then, your wireless devices will automatically connect to the signal with the best quality. Best quality may not be the fastest signal since there are lot of factors involved with signal quality. But, if you think about it a bit more, don't you want to have your wireless device connect to the signal with the best quality?
Some users swear by assigning a separate name to the 5 GHz band. I'm not one of them, but If it works well for them and they are happy, then there is no reason to change.
An older AirPort on your network is going to drag down the speeds. You need the new AirPort Express, or better yet an AirPort Extreme if you want to be able to extend the new 802.11ac signal.

HT1178 i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

You probably can, but this type of configuration is not recommended or supported by Apple.
Two cautions if you want to try this:
1) The Time Capsule has to be configured to "Join" your existing wireless network in this type of setup...and to do that, you must know the exact type of wireless security that your network is using.
2) Backups are likely going to take twice as long. The wireless signal must travel from your computer to the wireless router and then from the wireless router back to the Time Capsule. Two "hops"......even if the computer is located close to the Time Capsule.
If you want to try this, we can tell you how....but with no guarantees on your results....since this is not officially supported.

HT3275 I recently bought a new Time Capsule and the following message is shown:- "Time Machine could not complete the back up. The backup disk image "/Volumes/Data-1/Brian's iMac.sparsebundle" is already in use." Can anyone help?

I recently bought a new Time Capsule and the following message has started to show:-
"Time Machine could not complete the back up. The backup disk image “/Volumes/Data-1/Brian’s iMac.sparsebundle” is already in use."
Can anyone help?

Pondini is the resident Time Machine expert on the forums, and he has all the answers.
Check is excellent Time Machine - Troubleshooting support document
http://pondini.org/TM/Troubleshooting.html
See # C17 in particular

PowerBook G4 not connecting to new Apple network setup up with Time Capsule

I have a MacMini and Macbook Pro which I have successfully setup to work on a home network with my new 500GB Timecapsule. Only the MacBook Pro wirelessly uses Time Machine with the Time Capsule and the MacMini has its own external back-up.
The Problem is I also have an older PowerBook G4 running 10.2.8 so that my daughter can also run older pre-OS X kids programs and my wife uses the wireless internet on it...until now.
Can you explain why my powerbook will not recognize or login to my new Time capsule network when it was working fine on my old linksys wireless-g? I only want internet access...no back-up.

You could have the time capsule set up for 802.11N. If your powerbook is 802.11b/g then it will not connect. You would have to make sure that the times capsule is set up for b/g as well.

I have a new time capsule, want to use it in conjunction with iMac G5 and MacBook; laptop runs Snow Leopard but G5 can't install Snow Leopard, is stuck at OS 10.4.11. Am I doomed? Can anyone advise me? Thanks..

I have a new Time Capsule, want to use it in conjunction with an iMac G5 and a MacBook. MacBook runs Snow Leopard, but G5 (lacking Intel processor) can't install Snow Leopard, is stuck at OS 10.4.11. Am I doomed? Will appreciate any advice. Thanks.

you should still be able to get a copy of Mac OS X 10.5 (Leopard), which should run on your G5.

How do I set up my new Time Capsule just to back up not as a wireless?

Can anyone tell me how to use my new Time Capsule just for back up not as a wireless router?
I have an ATT Uverse for my wireless service and have not been able to get the two to work together.
I just want to plug my Time capsule in and connect it to my MacBook Pro with an ethernet an click backup.
So far my computer doesn't reconnect the Time Capsule.
Thank you for your help

You will need to configure the Time Capsule (TC) to join the wireless network provided by the ATT Uverse router, as follows:
Either connect to the TC's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the TC, and then, using the AirPort Utility, change this setting:
AirPort Utility > Select the TC > Manual Setup > AirPort > Wireless tab > Wireless Mode: Join a wireless network
Wireless tab > Wireless Network Name: <select the ATT Uverse network>
This configuration will allow your Mac to connect by wireless to the ATT Uverse router and perform Time Machine backups wirelessly.
If you want to only do this backups by wire, then you will need to connect the TC directly to the ATT Uverse router by Ethernet, and then, reconfigure the TC as a bridge. You can then connect the Mac to the TC by Ethernet as well for backups.

Setting up brand new Time Capsule and it asks for a Password????

Okay, so I'm attempting to setup my girlfriend's new Time Capsule with her brand new MacBook Pro but when I access Airport Utility and it tells me there's a problem with the Time Capsule accessing the internet, I then click to continue to troubleshoot the Time Capsule and it asks for a password. Now, the Time Capsule has never been used before and is fresh out of the box. WHy is there a password? I will say this detail:
That the brand new MacBook Pro that she recently purchased, she had all over her old data and files and settings transferred from her old MacBook. I don't know if that means that it automatically installed a password or anything, but I tried using the computer administrator password and that didn't work. ANyone have any idea what's going on?

jkwells84, Welcome to the discussion area!
Sometimes it does help to read some documentation. Like most routers, the Time Capsule has an admin password to keep others from being mischievous and changing your settings.
The default admin password is "public."

WiFi no longer working with new Time Capsule-can you help please?

Hi all,
Just received my new Time Capsule (TC). It was a little problematic setting up, but probably due to my now choosing to increase my security from WEP to WPA as the TC set-up assistant suggests. Since then, I have had numerous problems getting my other computers and now my iPhone to connect with WiFi.
The problem is that despite entering all the new settings and WPA passwords for my connection with the TC, the iPhone will either momentarily recognize and go to wifi or simply stay on Edge.
On the former, with wifi active, as soon as I go to iTunes, Safari or check email, it reverts to Edge. On the latter, despite resetting, entering password, or tapping Settings and selecting my wifi connection, it will NOT connect and stays on Edge.
(Now, I'm on Edge! I'm bummed that with new hardware I have new problems that didn't exist before!)
Can someone who had this same problem tell me how they resolved it.
Here's the one clue I have, but would rather not resort to: When I first set up the TC, I had it on WEP with a WDS Network, and everything was working great and FAST! Now that I have increased the security—I will be backing up 3 computers to the TC—my iPhone and other computers seem to have intermittent or no wifi connection as a result.)

Irving Gonzales,
If your computers are 802.11N capable, you might want to try an advanced setup that might help your Time Machine speeds some. I have not personally tested it, so it is just a personal theory at this point.
First, in a mixed environment the 802.11N clients all get slowed down.
First, configure the TC for 802.11N only.
Second, connect the Airport Express via ethernet to the Time Capsule
Third, configure the Airport Express for bridged mode (doesn't give out IP addresses), and for its own wireless network with a different name than the Time Capsule.
Have any 802.11b/g clients like the iPhone join the Airport Express' network.
Thank you,
Nathan C.

I am unable to set up my new Time Capsule with my BT Home Hub - every time i connect the ethernet cable from Wan port to Home Hub, the internet signal drops

Hi there -
I've just purchased a new Time Capsule, and would like to set up a small home network with my Laptop, iMac and wireless printer. I'm following the first steps, but as soon as I connect an ethernet cable between the WAN port of the TC and the ethernet port of the HH, my BT internet connection drops out and I have to restart the HH. Upon which point it drops out again. The airport utility can see my TC, and gets as far as me typing in the new network name and setting up a password, but then it can't quite get through to the next stage. All the time it's just flashing amber.
Please help!

Setup the TC in bridge mode before you cannot it to the HH.
Simply do the setup fully in isolation. And do it by ethernet.
Setup wireless to create a wireless network.
You can use either same SSID =Wireless name as the HH .. same security same password.
Or use a different name and setup.. totally up to you.
Update the TC and then plug it into the HH by ethernet.

Setting up Air play with new time capsule and newer airport express?

I just recently purchased a new time capsule, and I'd like to use my current generation airport express to stream music from my apple devices. I just was wondering what I had to do in airport utility to set this up? I was also wondering how to transition the network over from the old express to the new time capsule as far software settings go. I really appreciate the help and assistance. Thanks folks. I'm really looking forward to setting up the network for our new iMac.

Your setup is very easy..
This is how I would do it.
Remove the express from the network.. ie just unplug it but do not change anything in it. Keep the configuration as is until the TC is working.
Power off the cable modem.. this is requirement.. at least 20min is usually needed, dependining on your ISP.
Go into the airport utility and setup the TC as router for your network .. it is a simple setup.. but I would do as stated.. all short names, no spaces pure alphanumeric rather than accept Apple's names. That is for TC and wireless.
After 20min power up the cable modem. Once it is running and you have internet access. you can proceed to setup the express to do the airplay. If the internet still doesn't work, power off the cable modem overnight..
Do not lose that express setup so if you absolutely have to, you can at any time substitute it back and have internet again.
So everything is working properly TC in place as full router.. now hard reset the express.. and simply use the airport utility to put it in extend wireless .. or plug in by ethernet if you are going to hard wire it.
The extend wireless setup is all done straight from the existing setup.
Now you can plug your express audio port into your speaker.. and setup the airplay via the itunes.
I will get Bob to give you his way of doing it.. There is no one RIGHT way .. but he can give you more info if you want a particular method.

I have connected a new time capsule to a dsl modem. It doesnt see the internet. Airport utility says: Disconnected. But it isnt. Internet tab shows PPPoE. Must I enter Account Name or Password? If so, where do I find them? If not, what do I do?

I have connected a new Time Capsule to a DSL modem using an ethernet cable . The modem is working fine and connected fine. But the Time Capsule doesnt seem to be talking to the modem. If I click the internet Icon in Airport Utility it shows Disconnected.If I click the Time Capsule icon and go to the internet tab it shows Connect using PPPoE. Is that what it should be? In the box below there is place for an account name and password. DO I need to filll these out and if so what do I put there--information about the Time Capsule of informationabout the Modem? And where do I find the information.
Or am I completely on the wrong track.

Thanks. The modem is a Speedtouch ST585 v6. How do I know whether it is in adsl bridge? Also this is a modem-***-router. Does that make a difference?
If you did not put it in bridge then it is not in bridge..
Connect a computer directly to the modem.. open the browser to either 192.168.1.254 or 10.0.0.138 (if neither of those work you will have to check the IP address your ISP has set).
BTW who is your ISP and do they allow PPPoE.. for instance most ISP in UK do not use pppoe so you have no choice but to run the 585 as a router. In which case bridge the TC
Anyway.. open the setup configuration in the Thomson and select a template that says bridge.. run through the wizard and it will then bridge the modem.
And I am using Airport Utility 6.0. How do I get the earlier version?
By reading the site link I just gave you.. downloading the utility and running it on your computer. Or simply google to 5.6 lion airport utility... that is the way I find things when I don't have the link memorised.
Finally, AIrport Utility shows a number in a red dot next to the time capsule icon, currently 2. What is that for? What does it tell us?
Firstly download the useful utility.. but the dots tell you something is wrong and preventing the TC from working.. if you open the utility it should tell you what the errors mean.. I cannot tell you what they are, but it is likely to be no internet connection and pppoe has failed.

How do I use Back to My Mac with a new Time Capsule if I don't have a MobileMe account?

I just got a new time capsule and I'm trying to set it up so that I can remotely access the files when I'm at work/on the go etc. Now I have an iCloud account, but I don't have a MobileMe account. I do have an @me.com address because I enabled Mail thru the iCloud pref pane and I setup the @me.com email address but I'm still not able to use back to my mac.
I am running the latest fully updated version of lion on the latest model air, working with a 2TB 4th gen time capsule

See the following:
Back to My Mac- Supported router devices
Mac OS X 10.7 Help- Use Back to My Mac
Mac OS X- Using and troubleshooting Back to My Mac with your iCloud account on OS X Lion
Setting up and using Back to My Mac with an 802.11n-based AirPort base station, or Time Capsule
What happens to Back to My Mac after I move to iCloud?
Mac OS X 10.7 Help- Share your computer’s screen using Back to My Mac
What happens to Back to My Mac after I move to iCloud?

How can I get my Time Machine to recognize my new Time Capsule?

I have a new Time Capsule and in the initial setup I accidently clicked on the option for not using it with time machine. How do I set it up for time machine backup? Right now the wireless function as router works but time machine does not recognize the Time Capsule for back up.

Bob Brewer wrote:
I have a new Time Capsule and in the initial setup I accidently clicked on the option for not using it with time machine. How do I set it up for time machine backup? Right now the wireless function as router works but time machine does not recognize the Time Capsule for back up.
welcome to the discussion area, Bob !
go system preferences > time machine > change disk. re-select the TM's volume and click +use for backups+.

Anyone setup a new Time Capsule or AEBS yet?

Similar Messages

Maybe you are looking for