Anyone smart enough out there to answer this?

Hey I can NEVER get through to the right dept in Apple to get an answer to my question, so hopefully someone can help, here goes. OK I have DSL at my house, I just have one modem at the house for my PC laptop, just standard, not wireless. The problem is I want to get my G4 powerbook online as well. I'm thinking of getting a Airport Extreme unit. What I want to know is if I get it can I have my PC laptop hooked up online through it and have my G4 powerbook hooked up online at the same time without buying any additional equipment? And if I need any extra equipment what would I need? Any help would be GREATYLY appreciated.

No extra equipment should be needed, assuming the modem uses Ethernet. Just plug the modem into the Extreme's WAN port and the PC laptop into one of the LAN ports. You would even have the option of plugging your PowerBook into another LAN port if you need full 100 Mbit speeds for some reason (e.g transferring very large files between laptops).

Similar Messages

Hello, failing miserably here, cant import nef files from aperture 3.1.2 to iphone 4. I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's Anyone out there to aid this frustrated photographer??

hello, failing miserably here, cant import nef files from aperture 3.1.2 to iphone 4. I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's Anyone out there to aid this frustrated photographer??

See my reply to a later simplified version of your question. I don't think that either iPhone or iPad recognize RAW files such as NEFs. And the iPhone is not designed to be a mass storage device like a portable flash or portabel hard drive for temporary storage of files, if that's what you're after. As I mentioned in my previous reply, I have an iPad and have been experimenting with it as a tool for photography, hoping that it would be a nice travel tool for backing up and viewing photos from my Nikon dslr. But both the iPad and iPhone just are not set up to do that well. Both show photos nicely, but organization of photos is very frustrating since you can't create albums on the iPhone or iPad, but only back on your sync computer. (There is one very powerful photo organization app called SortShots, but you import photos to it and it organizes and stores the images wtihin the app not using the native photo app. It doesn't work with NEFs either.) I don't know of any RAW processing software for either device.

I would like to make a suggestion for the next iso iphone 4-4s update. Include a seperate treble and bass switch. What do u people out there think about this

I would like to make a suggestion for the next iso itunes software update for the iphone 4-4s. Include a serperate treble and bass switch for the ipod on the iphone. What to you people out there think about this?

vince20 wrote:
Obviously you dont like listening to music on your ipod in iphone. The EQ is crap
Not true at all.
I listen to music on my iphone all the time.
It is your position that anyone who does not agree with you does not listen to music?
Really?
What a leap.

I have a Yamaha DGX220 Piano Keyboard Does anyone of you out there experience the same problem?

I have a Yamaha DGX220 Piano Keyboard and I have downloaded their driver. After downloading and installing there is no interfacing with the computer, it doesn't recognize the Yamaha Midi driver.
Does anyone of you out there experience the same problem? I have downloaded the Mavericks OS.. The Yamaha company thinks there is a bug within Mavericks that causes this no connection issue.
Regards,
David Griffith

griffy2 wrote:
Hi,
Would you explain what remote MIDI sequencer is?
Your keyboard has a bulit-in Music recording device. This is actually a buiti-in digital MIDI music sequencer. It can also, output through the MIDI connectors the MIDI sequence to either software on a computer or other external MIDI devices like dedicated sound modules or computer software sound modules or software sequencers
I use both software MIDI music software sequencers and a dedicated hardware MIDI music recording sequencer in my system.
Dedicated digital MIDI hardwaremusic sequencers do the same things as the bulit-in sequencer on your keyboard and computer software music recording sequencing.
Digital MIDI music sequencers DO NOT RECORD SOUNDS.
They record things like what keys are pressed on the musical keyboard, how much key sensitivity and pressure was applied, other parameters like if you change the pitch of the keyboard up and down by half steps, the sound number and sound bank number, records pedal information, records wheel and pitch bend wheel information, records other MIDI active button controller information, etc.
Basically, keyboard sequencers, hardware sequencers and software sequencers record the performance nuances of your playing and NOT the actual sounds that you are hearing.

My ipad mail is synced to my iMac mail account. On iPad, I can only see my inbox and sent messages. I can't see any of the folders I have created on my iMac. How do I do that? Probably a dumb question, but I know there's a lot of smart people out there!

My iPad mail is synced to my private email account, which I organise on my iMac. On iPad, I can only see inbox and sent messages folders, not any of the other folders in my email account I have created on my iMac. How do I get iPad to show my other folders? Probably a dumb question, but I know there's a lot of smart people out there.

If you select a mailbox, you should get an Edit button (easier to see in landscape mode). Clicking the button will provide you with check circles for the messages. You also get Delete and Move buttons at the bottom. Check the messages you want to move and then navigate to the mailbox you want to drop them into. I think as long as you can navigate to a mailbox you can move the messages to it.
In the Mac Mail application and probably Outlook on the Windows side, you also setup rules to move messages to specific mailboxes. If the mailboxes are stored on the server, then you can have the sorting done on the server and they should appear that way on the iPad. If your later messages do not show up, you may need to have the iPad app pulled down more messages until they are all showing.

I tried to download images from a jump drive and now the jump drive seems blank. How can I recover the images? Is there a software program out there to do this reliably?

I took photographs with my Lumix camera (JPG) and put the sd chip into a jump drive and put them into my usb port to load. The images never loaded and now the sd chip has no images when I put it back into the camera. What can I do to restore the images? Is there Mac compatible software out ther to restore them? I am running a Macbook Pro OS X v 10.7.5. Thanks for your help.

I'm not sure I can help you with this situation. Odds are you probably can't recover the images if they aren't hidden in the card, but this just seems to be a fluke. I've had flash drives that be plugged in only to find out that was their iminant death.

I can't get anyone smart enough to answer this, can anyone?

Hey I can NEVER get through to the right dept in Apple to get an answer to my question, so hopefully someone can help, here goes. OK I have DSL at my house, I just have one modem at the house for my PC laptop, just standard, not wireless. The problem is I want to get my G4 powerbook online as well. I'm thinking of getting a Airport Extreme unit. What I want to know is if I get it can I have my PC laptop hooked up online through it and have my G4 powerbook hooked up online at the same time without buying any additional equipment? And if I need any extra equipment what would I need? Any help would be GREATYLY appreciated.

Titus,
Welcome to Discussions!
If you add an Airport you can either keep the PC hardwired to it or you can add a wireless card to the PC. The Airport will act as a router and a switch. No other equipment will be required.

Anyone out there can answer some basic icloud questions?

just getting introduced to icloud
having a few minor issues
want to put all music up not just purchashed
what about audio books
have 55 gb of icloud space
have itunes match
just need to learn how to put all the pieces together
have ipad
iphone
pc laptop
and pc work station

iTunes Match will include all your music (some restrictions apply), not just purchased content, it doesn't include audio books.
it doesn't use iCloud or your iCloud storage allowance, once you have subscribed it doesn't matter how much room your music takes up.

Anyone smart enough?

My program does not have any errors until compiling where it states:
java.lang.NullPointerException
at project2.Collection.getNum(OrderProcessing.java:171)
at project2.OrderProcessing.main(OrderProcessing.java:240)
so basically it doesn't like my print statement:
System.out.println("Student Num: "+ access2.getNum(counter));
It also points to my collection class (access2 is collection class) to the getNum method. Does anyone know what I'm doing wrong? Here's the full code:
abstract class Student {
protected double Id;
protected String Name;
protected int grade1, grade2, grade3;
public Student(double i, String n, int g1, int g2, int g3) {
Id = i;
Name = new String(n);
grade1 = g1;
grade2 = g2;
grade3 = g3;
public abstract String calcGrade(double avg);
public abstract double getNum();
public abstract String getName();
public abstract int getG1();
public abstract int getG2();
public abstract int getG3();
class UnderGrad extends Student {
public UnderGrad(double i, String n, int g1, int g2, int g3) {
super(i, n, g1, g2, g3);
public String calcGrade(double avg) {
if (avg >= 90.00)
return "A";
else if (avg >= 80.00)
return "B";
else if (avg >= 70.00)
return "C";
else
return "F";
public double getNum()
{ return Id; }
public String getName()
{ return Name; }
public int getG1()
{ return grade1; }
public int getG2()
{ return grade2; }
public int getG3()
{ return grade3; }
class Grad extends Student {
public Grad(double i, String n, int g1, int g2, int g3) {
super(i, n, g1, g2, g3);
public String calcGrade(double avg) {
if (avg >= 90.00)
return "A";
else if (avg >= 80.00)
return "B";
else
return "F";
public double getNum()
{ return Id; }
public String getName()
{ return Name; }
public int getG1()
{ return grade1; }
public int getG2()
{ return grade2; }
public int getG3()
{ return grade3; }
class Audit extends Student {
public Audit(double i, String n, int g1, int g2, int g3) {
super(i, n, g1, g2, g3);
public String calcGrade(double avg) {
if (avg >= 50.00)
return "U";
else
return "F";
public double getNum()
{ return Id; }
public String getName()
{ return Name; }
public int getG1()
{ return grade1; }
public int getG2()
{ return grade2; }
public int getG3()
{ return grade3; }
class Collection {
protected Student myArray[];
private int num = 0;
private int g1, g2, g3;
protected String studentType;
private double avg;
public Collection()
myArray = new Student[40];
void addCase(int studentType, double i, String n, int g1, int g2, int g3) {
switch (studentType)
case 0:
myArray[num] = new UnderGrad(i, n, g1, g2, g3);
num++;
break;
case 1:
myArray[num] = new Grad(i, n, g1, g2, g3);
num++;
break;
case 2:
myArray[num] = new Audit(i, n, g1, g2, g3);
num++;
break;
case 3:
// end of file
break;
default:
System.err.println("Letters from file have to be U, G, A, E");
double getNum(int num)
return myArray[num].getNum();
String getName(int num)
return myArray[num].getName();
double getAvg(int num)
avg = 0;
g1= myArray[num].getG1();
g2= myArray[num].getG2();
g3= myArray[num].getG3();
avg = (g1 + g2 + g3)/3;
return avg;
public class OrderProcessing
public static BufferedReader inFile;
public static StringTokenizer sTokenizer;
public static void main(String[] args) throws IOException
int record = 1;
Student access1[] = new Student[3];
Collection access2;
access2 = new Collection();
DecimalFormat percent = new DecimalFormat ("%");
String inputString, n, sT;
int value, g1, g2, g3, counter, studentType;
double avg, i;
inFile = new BufferedReader(new FileReader("C:/grades.txt"));
inputString = inFile.readLine();
while(inputString != "E") {
for(counter = 0; counter <=4; counter++) {
sTokenizer = new StringTokenizer (inputString,",");
sT = sTokenizer.nextToken();
i = Double.parseDouble(sTokenizer.nextToken());
n = sTokenizer.nextToken();
g1 = Integer.parseInt(sTokenizer.nextToken());
g2 = Integer.parseInt(sTokenizer.nextToken());
g3 = Integer.parseInt(sTokenizer.nextToken());
if (sT == "U")
studentType = 0;
access1[0] = new UnderGrad(i, n, g1, g2, g3);
else if (sT == "G")
studentType = 1;
access1[1] = new Grad(i, n, g1, g2, g3);
else if (sT == "A")
studentType = 2;
access1[2] = new Audit(i, n, g1, g2, g3);
else
studentType = 3;
access2.addCase(studentType, i, n, g1, g2, g3);
System.out.println("Category:");
System.out.println("Student Num: "+ access2.getNum(counter));
System.out.println("Student Name: "+ access2.getName(counter));
System.out.println("Course Average: "+ percent.format(access2.getAvg(counter)));
System.out.println("Passed Course: ");//+ access1.getNetAmt());
System.out.println("--------------------------------");
avg = access2.getAvg(counter);
record++;
inputString = inFile.readLine();
inFile.close();
}

>
My program does not have any errors untilcompiling
Nobody's program has any errors prior tocompiling.
I disagree. It can have design problems.And it can have all sorts of other problems too,
including errors. (Let's skip any semantic arguments
about whether a design problem is strictly speaking an
"error".) You just don't know about the errors yet.
I was making a joke, ...I understood that. But since others do read these threads I wanted to make it clear that syntactic errors are not the only source of problems with code.

Just switched from PC to Mac, What's the tutorial items out there to learn this system?

Would like to know the best ways to learn this system. Wasn't very good with PC but there is something about this iMac that makes want to master it. (Ha!) I would welcome any suggestions on what to get to help me learn in an easy every day language. Any suggestions greatly appreciated..... Thanks

I didn't prune this list, so some might have been mentioned.
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac 101: Mac Essentials,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mountain Lion Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

Does anybody out there know what this means, or indicates?

One of the ongoing problems I have with Logic Express 9. 01 is every so often, sometimes more than once a day, the program will just crash. It takes the form of losing audio, even though I can see that signal is passing back and forth between my keyboard, the Apogee Ensemble and the computer. All of a sudden, total loss of sound. Buffer is set to 256, but this doesn't seem to make a difference. Lately I've taken to having Console mounted so I can watch the messages it logs as I'm playing. Very interesting. Anyway, this is the message:
10/27/09 5:33:00 PM [0x0-0x12a12a].com.apple.logic.express[6253] Tue Oct 27 17:33:00 richard-strachans-imac.local Logic Express[6253] <Error>: kCGErrorIllegalArgument: CGSRemoveTrackingArea: Invalid window 0x0
I distinctly heard a sharp click, and then the sound was gone. this was the last message logged as it clicked. I hear the new 10.6.2 update will fix bugs in Core Audio. Is this one of them?
Thanks,
Rick

Can't offer any solution, but just to chime in and say I'm having a similar problem with Logic Pro 9.0.2 on an iMac Core 2 Duo. Running Snow Leopard 10.6.2.
I'm using an Apogee Duet. I doubt this is caused by Firewire chipsets, as my same hardware and software setup ran fine without this problem, for months before I upgraded to Logic 9 (from Logic 8). (And also under Leopard.) This only appeared after upgrading to Logic 9.
What happens is Logic 9 will randomly crash (thankfully it autosaves the current project as it does so), and the only clue I have as to what has happened is the console reporting the same error the OP reported:
*+16/12/09 6:20:27 PM [0x0-0x89089].com.apple.logic.pro[854] Wed Dec 16 18:20:27 noone.local Logic Pro[854] <Error>: kCGErrorIllegalArgument: CGSRemoveTrackingArea: Invalid window 0x0+*
*+16/12/09 6:20:27 PM [0x0-0x89089].com.apple.logic.pro[854] Wed Dec 16 18:20:27 noone.local Logic Pro[854] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.+*
*+16/12/09 6:20:28 PM [0x0-0x89089].com.apple.logic.pro[854] Wed Dec 16 18:20:28 noone.local Logic Pro[854] <Error>: kCGErrorIllegalArgument: CGSRemoveTrackingArea: Invalid window 0x0+*
Immediately after the above errors I get the following errors:
*+16/12/09 6:20:39 PM [0x0-0x89089].com.apple.logic.pro[854] Renoise ReWire Engine LOG> ============================================================+*
*+16/12/09 6:20:39 PM [0x0-0x89089].com.apple.logic.pro[854] Renoise ReWire Engine LOG> Version : Renoise ReWire Engine V1.0.0 (May 26 2009)+*
*+16/12/09 6:20:39 PM [0x0-0x89089].com.apple.logic.pro[854] Renoise ReWire Engine LOG> Date : 2009-12-16+*
*+16/12/09 6:20:39 PM [0x0-0x89089].com.apple.logic.pro[854] Renoise ReWire Engine LOG> Time : 17:59:57+*
*+16/12/09 6:20:39 PM [0x0-0x89089].com.apple.logic.pro[854] Renoise ReWire Engine LOG> OS : Mac OS X 10.6.2 (i386)+*
*+16/12/09 6:20:39 PM [0x0-0x89089].com.apple.logic.pro[854] Renoise ReWire Engine LOG> ============================================================+*
*+16/12/09 6:20:39 PM [0x0-0x89089].com.apple.logic.pro[854] Renoise ReWire Engine LOG> Engine loaded...+*
*+16/12/09 6:20:39 PM [0x0-0x89089].com.apple.logic.pro[854] Renoise ReWire Engine LOG> Engine is initializing...+*
*+16/12/09 6:20:39 PM [0x0-0x89089].com.apple.logic.pro[854] No ejectable CD media found.+*
*+16/12/09 6:20:39 PM [0x0-0x89089].com.apple.logic.pro[854] kernResult = 0+*
*+16/12/09 6:20:39 PM [0x0-0x89089].com.apple.logic.pro[854] No ejectable CD media found.+*
*+16/12/09 6:20:39 PM [0x0-0x89089].com.apple.logic.pro[854] kernResult = 0+*
*+16/12/09 6:20:39 PM [0x0-0x89089].com.apple.logic.pro[854] Renoise ReWire Engine LOG> Engine shutting down...+*
*+16/12/09 6:20:39 PM [0x0-0x89089].com.apple.logic.pro[854] Renoise ReWire Engine LOG> Engine released...+*
*+16/12/09 6:20:39 PM [0x0-0x89089].com.apple.logic.pro[854] Renoise ReWire Engine LOG> Closing log file...+*
*+16/12/09 6:20:47 PM com.apple.launchd.peruser.501[184] ([0x0-0x89089].com.apple.logic.pro[854]) Job appears to have crashed: Abort trap+*
*+16/12/09 6:20:51 PM ReportCrash[898] Saved crash report for Logic Pro[854] version 9.0.2 (1664.16) to /Users/anthonym/Library/Logs/DiagnosticReports/Logic Pro2009-12-16-182051noone.crash+*
*+16/12/09 6:23:27 PM SubmitDiagInfo[914] Submitted crash report: /Users/anthonym/Library/Logs/DiagnosticReports/Logic Pro2009-12-16-182051noone.crash+*
I wonder if this could be to do with Renoise or Rewire? I have the latest version of Rewire installed.
Message was edited by: Anthony Milas
Message was edited by: Anthony Milas

Can anyone answer this question? What is used to format a string so that it falls into a certain Row/Column in excel? see text for indepth question.

I'm attaching a file that may help. Just remember this is my FIRST attempt at using NI/FeildPoint so things that would be obvious to the normal users more than likely would slide right by me. So I'll try and explain what the text contains as to make my problem more clear. I'm using a FP-1000, FP-AI-100, and a FP-TB-10. i'm creating a application where I'm using the 8 channels from the FP-AI-100 to monitor a control system ,that we manufacture. The control system is in an environmental chamber. I use the FP-TB-10 to monitor the temperature while in the chamber. The control system is ran for 4 hours under varing enviromental conditions while I monitor vital system voltages with the FP-AI-100. Now the application that i'm building starts with the obvious FP CREATE.VI and so forth I have no problem communicating with the FP's, but the information that I'm monitioring needs to be placed into a file with Headers describing the information below it. Now I use a "WHILE LOOP.VI" to monitor the FP-AI-100 & FP-TB-10 for the 4 hour period. but before that I create and open a file where I use a "CONCATENATE STRINGS.VI" to enter the headers I need. I do this by CONSTANTS, CONTROLS, TABs, AND CARRIAGE RETURN being entered into the "CONCATENATE STRINGS.VI" in the order I want them to appear. I use ROW 1 to enter (OPERATOR:with a CONSTANT) an a (CONTROL so the operator may enter his name and be recorded into the file) using a TAB to seperate Columns and a CARRIAGE RETURNto drop down to ROW 2 for the next headers. I use header names and TABs to seperate the columns. This part works great. I end up with ROW 1 having the operator information then ROW 2 having the headers for all the channels I'm using to monitor the control system with in their own column. The trouble happens when I write to this file during the "WHILE LOOP". The information recorded for DATE:, TIME:, and Channel 0 of the FP-AI-100 end up right under their corresponding header on ROW 3, but the rest of the data ends up on ROW 4 in column 3 and goes down many rows with some of the data not being stored at all. It varies on how many rows are used starting at ROW 4 but hey always stay in column 3. I use the "FP READ.VI" outputing to a "ARRAY TO SPREADSHEET STRING.VI" outputing to a "CONCATENATE STRINGS.VI" for each channel within the "WHILE LOOP" then into the "WRITE.VI". I use the "CONCATENATE STRINGS.VI" to place my data OR atleast I thought you could do that some how I'm not quit doing something write either there is a sampling/timing issue or writing to file issue where things are being confused in the "WHILE LOOP" if someone know a better route to perform what I'm tring here I would be interested. Its not like I'm not giving it the old colledge try here but without proper training and the vagness of the manuals it's difficult to understand what every connection actually does.I'm tring though for everyone who happens to fill pity for me
Thanks for your help
John Morris
Glendinning Marine Product, Inc.
Attachments:
ALLchannels ‏273 KB

> I appreciate your effort to help me, but there is still a slight cloud
> in front of my eyes here.(I must mention that I'm using Labview 5.1
Oh, to bad. I'm using LV 6,02 and tried to save the application as LV5.1,
but it didn't work.
> Lets start with the easy one which is the SECOND main thing you
> wanted to mention. In my application I used individual Create Tag.vi's
> "so your saying that I can use just one Create Tag.vi and one Read.vi
> and what ever I use to display the values will automatically to show
> the individual channels" in other words if I use a "Indicator(DBL)"
> comming out of the Read.vi what ever I use in the "PANEL" layout will
> expand to show all 8 channel if I was using a FP-AI-100? Cool...
Allmost right. The 8 channels come out as 1D-array, ch0...ch7.
> #1--How do I change the delimiter (TAB) to a delimiter (comma) in a
> Array to Spreadsheet String.vi?
> ...cut
I don't use this Spreadsheet VI, because files coming out there allways
start this time consuming EXCEL wizzard. Because of this, I programmed my
own CSV-conversion vi. Maybe you could just use a common texteditor, like
wordpad and put the csv-examples from my last reply down to a text file
and rename it to *.csv. Texteditors terminate lines with "\r\n" by
default, so this is a very quick way for testing.
> FP_Analog_Logging example to record all eight channels it uses a Array
I didn't find the vi you metione above, but there is another good one:
Look at examples\FieldPoint\DataLogging\FP Logger.vi.
In a little case structure, at "false", there is a function called "Format
into string".
Pop up on the format string and adjust >>'\' Codes Display<<.
Then you change the format string into: %.;%-f%s
A Tab string is connected to the lower input of this function. Replace
this one with a comma.
That should do.
>
> #2--If using just one Create Tag.vi and one Read.vi and I have the
> Item Name listed as ALL I take it that the information comming out of
> the Read.vi is data for each channel in a String format starting with
> channel 0 and ending with channel 7 for the FP-AI-100.
Yes, just as explained above. If you put a indicator at the output to
display the values, you can expand the display to show all 8 channels, but
you can't name induvidual cells. In a array, all cells have identical
named labels. If you want to name the individually, you have to attach the
array to cluster function and put the indicator after this one. Enable
labe display and name the output values individually.
> #3--Now I use the following to "Format String" in the Array to
> Spreadsheet string.vi (%.4f)but I don't see anyway of changing the
> delimiter from (TAB) to (COMA)
Explained above.
> #4 you stated text strings need a "as prefix and sufix" and each
> string is seperated by a coma, a period is used as decimal number
> separator and lines have to be terminated by my question is
> WHERE IS THIS ACCOMPLISHED? WHAT VI OR WHAT CONNECTOR PIN?
Well, modifying strings are done with string functions.
Above, as I explained how the sample FP Logger.vi can be modified to do
the job for numbers. The pre- and suffixing with ", you only need for
strings, which EXCEL should interpret a string and as nothing else as a
string, even if there's a number inside. You usually need this only for
headers. So its easyest, if you just write your string into a string
constant or control and concatenate it to the previous csv-file contents.
Oh, I just see by looking at the above mentioned example... Inside the
case structure, but in the "true" case, there are error messages
concatenated to the logfile. At this point it is importent, to use " for
integrating the message into the CSV file, because a error message usually
looks like this: >> ERROR 2345 in vi yxz <<
Here you have text and number strings mixed in one line. EXCEL does not
know, if it should interpret the number inside the error line as separate
number, separating the line into three colums i.e. string before number,
number and string after number. So tell EXCEL by putting a " before and
after the line each.
For this, expand the Format To String function by one input, move down all
connections, to be able to insert a string constant with a " to the first
argument connector. Change the contents of the string constant at the
bottom argument from tab to ", (quotation mark AND comma)
> #5 You gave me an example of what a 3 column header could look like:
> "col0","col1","col2"\r\n Now is this something that you enter
> somewhere cause I know that \r is carriage return and \n is newline so
> I take it that the above is entered somewhere maybe in the Write.vi to
> the connector called Header (F)? See this is what confuses me because
> NI manuals have no examples of certain connectors types being used or
> any reference as to how they manipluate data with there varing type
> inputs. Or maybe I'm just missing them.
The example I mentioned above help here to.
Look at the Write File function. This function receves data from a
function named concatenate strings. Expand this function to have one more
spare input at the bottom. Create a string constant. Switch the constant
display to "\" mode. Enter "col0","col1","col2"\r\n into the constant.
Connect the constant to the spare input.
Doing this, every dataline in the csv file is followed by
"col0","col1","col2"\r\n .
I wish you a nice weekend,
Rainer Ehrt

I keep getting a msg - This accessory is not optimized for this iphone...Dismiss slide makes it go away but comes back. Phone is working ok but pop-up is annoying. Any help out there?

I keep getting a pop-up. This accessory is not optimized for this iphone.... A dismiss button makes it go away but it keeps coming back periodically.
Phone works fine. Any help out there?

Check this article: http://support.apple.com/kb/TS1505
If you get this message when you are using a "Works with iPhone" accessory, make sure of the following:
Make sure the packaging for the product says "Works with iPhone" and not "Made for iPod".For more information about iPhone accessories and the difference between "Works with iPhone" and "Made for iPod' accessories click here.
The iPhone dock connector is free of any debris.
The "Works with iPhone" accessory's connector is free of debris.
The iPhone is securely connected to the accessory—that is, it is not sitting crookedly within an iPhone dock and making only partial connection.

Better slideshow product out there?

Just looking for a little advice from those who have working with picutes and other software as well. I'm new to saving and displaying pictures on my computer. I bought PS3, thinking it was the best software out there in saving and presenting pictures (slideshows). In terms of a slide show, I will have to say I am not that happy with it so far, but again I'm new at it.
I guess my big question is (since I'm wanting to put together more slideshow presentations with music on to a DVD), what is the best software out there to perform this task. I liked how PS3 allows you to build your own slide show with different transitions and to manually fit the slides to the duration of the music, but after that I wish it was better at burning the material.
Any opinions are appreciated and will be helpful.
Thanks,
brad

Hi Bil,
First off - I'm not a guru, so may not explain this very well or completely accurately.
Every image file (jpg etc) has information embedded in the file. The information may include the date the photo was taken or scanned, the last date the image was modified, the type of camera that was used to take the photo, keywords, a caption etc. The keywords and caption are generally "written" into the image file by software like Adobe Photoshop when you assign tags or captions. Sometimes you have to use a function called "write tag info to files" for this info to get embedded in the image file (in Adobe Photoshop Elements in the dropdown menu when you click File). This file of information in the image is usually referred to as metadata. I'm not sure what the difference between "exif" data and "metadata", but in Proshow they call it "exif data" and it is the "exif macro" that can display the image information in your slideshow when you type the appropriate macro in the caption textbox.
If you've attached captions to your photos in Adobe Photoshop or some other software, this macro in Proshow is really useful because you won't have to retype all your captions in Proshow. It's also useful if you want to display the data a photo was taken again without having to manually create a caption for each slide.
I hope this helps.....
And in a final note, after 2 days I finally got a response from the Proshow email tech support and they confirmed that there's no way to add a caption with wrapped text. I'm pretty disappointed about that, since otherwise the software meets all of my needs. The only way around it is to create my special wrapped caption on the image itself, but that's kind of putzy.
Angela

Any iPhone Application Developers out there?

Hi All-
Any accepted iPhone Developers out there? I'm looking to partner with someone to create an application that would be a huge benefit for users of the iPhone. If accepted into the App Store, this app would be a great utility for all users. I'm not a developer and would love to find someone willing to work on this little idea.
Thanks
Dave

Jim Short wrote:
As others have expressed in this forum, I have a concern working at a defense company where cameras are not allowed. As cool as the iPhone is, I would not want to be fired for if Security discovers me with it!
I have read in other posts about people who have had the camera hardware removed for a fee, but this seems like a costly, extreme solution with the risk of breaking it and voiding the warranty.
If there are any iPhone application developers out there looking for something to do, it seems like it would be simple to develop a utility that would temporarily disable or enable the camera in a way that could be easily demonstrated to a security guard.
Are there any takers out there? Can this be done?
The camera cannot be turned off. Even if it could, the fact that it still has a lens isn;t going to stop security from stopping you.

Anyone smart enough out there to answer this?

Similar Messages

Maybe you are looking for