Anyone solved the blinking statusleds on 1252

Hi,
have anyone solved the blinking statuslights on the 1252? -it always blinks status blinks red,green,blue when on 15,4w, 802.3af compliant switch!
Im now running the 1252 lightweight on controller 4402 with firmware 6.0.182.0, i have administratively shut down the 5ghz radio and rebooted. still blinkning!!
The only solution seems to be to physically remove the 5ghz radio.
i have noticed that when 2.4 & 5ghz is inserted but 5ghz is shutdown it draws 10019mW.
when 5ghz radio i physically removed it draws 7555mW.

If you are using firmware 6.X, then this code will upgrade the firmware of the radios to version 2.0.0 which allows both radios to operate but at a lower rate.
The lights blinking red, blue, green at a pace of about 1 per seconds means that the LAP can't find the WLC. If the light is red all the time then it means that it's gone into ROMmon.
If the light is BLUE only that means that a client has successfully associated to it. If it's green it means that it's joined a WLC but no client has associated to it.
Hope this helps.

Similar Messages

Has anyone solved the "garbled characters" issue i...

When I use Nokia Maps on my N95, all streets and towns which contain special characters such as: é, è, ü, ä, ö, etc… do appear garbled. For example,
Zürich appears as: Zã¼rich
München appears as: Mã¼nchen
Liège appears as: Liã"ge
I saw a couple posts on this forum where people suggested to format the memory card, some other suggested to reload the firmware (my N95 has 12.0.013) but nothing has helped. I went as far as using someone's PC whose WinXP is installed in French - I thought that maybe the operating system or regional settings could have some influence, but I was wrong.
Has anyone solved this extremely annoying issue?
Thx

I solved it. It took me one evening. I wonder why Nokia haven't published any comments on this old issue.
Solution can be found below, but before I want to tell about some technical details. Maybe guys at Nokia will read them
As someone on this forum said before the problem is that map names are in UTF-8 format, but phone tries to show them using another encoding. After some googling I found that this issue is well-known because Nokia phones use ISO 8859-1 (which is similar to Windows-1252, Western European) by default but some application assume UTF-8 to be default.
At first, I discovered that when I start Nokia map with empty SD card and allow it to download something from internet, all names were shown correctly. I supposed that the problem sits in that awful Map Loader, but I was wrong: it does absolutely nothing special with data files, just downloading and unzipping. And this super-mega-feature-rich-map-loader require about 40Mb to download for .NET 3.0 plus 10 Mb for itself. Never seen anything worse
So I've started to compare contents of one SD card with incorrect street and city names and another with correct.
After some time I came across Cachedatheader.cdt file in diskcache folder. And what do you think?
The file from correct SD card contains a literal string: "UTF-8". While incorrect one contains a string saying "ISO 8859-1". I've nearly fell out of my chair after seeing that.
I've replaced wrong file with correct one and names became readable on all my 180mb of previously downloaded maps.
Finally, after playing with it some more I found a simple solution which should work for everyone:
***** SOLUTION *****
1. Enable internet access in Nokia Maps application (set it to When Needed).
2. Access memory card from your PC and go to "\PRIVATE\20001f66\diskcache" folder.
3. Delete "CachedatHeader.cdt" file. Perhaps you should backup it somewhere before deleting, but it looks like it can be removed safely without affecting existing maps.
4. Put the card back in the phone if you extracted it and start Nokia Maps.
5. Allow Nokia Maps to access internet and try downloading some new locations (you don't need to download much, just let it access server) or searching for something.
6. Now codepage should be correct and all names become readable.
This effect seems to be permanent and will stay even if you disable internet access later. Also note that you don't have to format card, remove or reinstall any map files. The problem is just in one small file.
Nokia Maps recreates missing CachedatHeader.cdt, but it will recreate it correctly only if internet access is enabled when it starts. Probably the best way to avoid wrong codepage problem is to enable internet access at first start of Nokia Maps and use Map Loader only after downloading some bits of map directly from the phone.
Message Edited by ankor85 on 09-Jan-2008 09:02 PM

Has anyone solved the problem of sending Pages docs to Windows machines?

I am trying to create a business newsletter that can be emailed to anyone who wants it. I'm working with OS X 10.4.10 and Pages. My business partner, who works on a PC, can't read a Pages doc, so I converted it to a pdf, and Windows won't read that, either. So I exported it as a Word doc, and he can read that, except the colors aren't true. What kind of a program creates files that pdf readers can't view? And why did I spend my money on Pages if it can't create a file everyone can read?

Strange, I've been emailing PDFs with no problems at all.
I am the only MAC-MAN in the office so all my work goes to 100% PC "market".
A wild guess - are you using Apple Mail app? If so, make sure the "Send Windows friendly attachments" is selected.
Do not encrypt the PDFs.
Do not include EPS graphics (just in case...)
JPEGs rather than TIFFs (dunno why, but better safe...)
And most importantly, make sure the end users have the latest Acrobat Reader!!!
You would be surprised to find how many "incompatibilities" boil down to obsolete software being used.
To give you an example, I did an internal use web page using a FLASH animation, and several users sent me VERY ANGRY emails that the "MAC crap" doesn't work on their computers, well, guess what, for security (MS-security, not REAL security) FLASH was disabled on the network computers, nuf'said!
Failing all above, send HTML.
Hope you solve the problem. Keep us posted.
i.3d

Anyone Solved the N96 Update Issue?

Wondering if anyone has come up with a solution to the problem of being asked to remove battery, charger and retry etc when using Nokia PC Suite to upgrade the firmware?
I have a branded T-Mobile N96 and the firmware update is available now to 11.###
I can't get past the step where it asks me to disconnect the charger and press the power button - very frustrating!
Anyone solved it?
Cheers

I had a lot of trouble updating my N82 using vista. It worked fine using XP. I have successfully updated other phones using vista but I still prefer XP for updates.
You should consider a reset as a last resort. Back up before you do using ovi suite if you have any pre-installed content that has a licence key. If you have installed any apps to the mass memory it may help to format that before a *#7370# reset.
Reset to factory defaults (*#7780#) : Restores settings but preserves user data (photos, 3rd party apps etc)
Reset (*#7370#) : This reformats completely the C: drive. All applications and files stored on this drive will be lost and clean default files will be rewritten.

Has anyone solved the privilege error message in iTunes?

Has anyone solved this? I can't get itunes to upload anything because it keeps producing this error message. I've followed the advice on other threads to change 'read & write' access and enable it across all, yet this has absolutely had no impact. Does anyone have any suggestions as to how to get round it so we can use itunes again please? Thanks.

Hi,
I got iTunes 7.3 running fine on my home computer (G5
2.7, OSX10.4.10) but still cannot get it to run on my
office MacPro Intel 2.66 without the -50 error. I
even tried downloading again this morning a new
installer from the Apple site.
Try what I did, it worked for me. Do the video podcasts solution part first. It's fairly painless to apply, and above all works.
http://discussions.apple.com/message.jspa?messageID=4836847#4836847

Did anyone solve the SIM issue in Shanghai ? Help us

Anyone solved this issue? Some said you can ge a new SIM card from China Unicom. Did anyone changed the card and solve the problem in Shanghai?
many thanks,

Hold on,
Have you talked to your carrier to confirm the unlock?
What was the procedure you did to unlock the phone?
Standard unlocking procedure once processed by the carrier:
Backup in iTunes
Erase the phone (ignore restore terminology here)
Plug the phone to the computer and then launch iTunes
Wait for unlock notification.
Restore the backup.

Anyone solved the sound issue for UK Sky viewers?

Hi,
At the moment, I have a Sky STB feeding into the MSI 8606, when I try to use the small audio link cable, the sound is fine for 1 minute or so, then vanishes... I have no screensavers or any scheduled tasks.
The only solution at the moment is to feed a separate sound feed into the Line-in of the sound card.
I believe this is an issue with the way PAL is encoded for use with Sky, and would probably be fine when connected directly to the Aerial.
Anyone got a solution?
As an aside, I am considering building a linux PVR based on MythTV has anyone got the MSI 8606 to work with this type of installation?
Thanks
RevJim

Quote
The only solution at the moment is to feed a separate sound feed into the Line-in of the sound card
i believe that is the better solution. as long as your recording program (MSIPVS) has the Line-In set as recording source, you shouldn't have any problems

Can anyone Solve the JDBC adapter error :

Hi experts!!!
Whn I run File(FTP) to MSSQL Server ( JDBC), I m getting an error

Receiver Adapter v1027 for Party '', Service 'BS_JDBC_R2':
Configured at 12:16:42 2007-01-05
Last message processing started 12:17:09 2007-01-05, Error: Accessing database connection 'jdbc:Microsoft:sqlserver://sapep:1433;databaseName=tescra' failed: java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
Addtional information: JDBC driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver' loaded successfully, additional driver information:
Available JDBC drivers:
com.microsoft.jdbc.sqlserver.SQLServerDriver, 2.2 JDBC compliant
Pls help me.... I have to clear it up.....
If anyone solves this they gud gud points from me...trust me..really!!!!!
Thanks in advance....

hi,
have a look at this:
http://support.microsoft.com/kb/313178
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Has anyone solved the Apple ID issue yet?

My 4 year old iTunes ID, a Yahoo email, was disabled as I could not verify it. I could not verify it as I never received the verification email. I get the same problem when I try to reset. iForgot tells me the ID does not exist but when I try to set it up as a new ID I am told it is already in use. I have already removed the email from my .mac Apple ID. Apple support are not responding. Can anyone help? I have a lot of content tied to the Yahoo ID so I can not abandon it.

Tweety72 wrote:
We continue to have garbled printing problems, on two different HP printers, yet it doesn't seem anyone at HP cares to find the cause of the problem. I've told them that I'll be donating the HP printers and buying something else. Any suggestions?
Yes, please read this post and then provide some details.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Has anyone solved the garbled printing issue yet?

We continue to have garbled printing problems, on two different HP printers, yet it doesn't seem anyone at HP cares to find the cause of the problem. I've told them that I'll be donating the HP printers and buying something else. Any suggestions?

Tweety72 wrote:
We continue to have garbled printing problems, on two different HP printers, yet it doesn't seem anyone at HP cares to find the cause of the problem. I've told them that I'll be donating the HP printers and buying something else. Any suggestions?
Yes, please read this post and then provide some details.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Has anyone solved the problem of receiving duplicate e-mails?

I've posted this previously, but not gotten any satisfactory responses. A mail account I've been using for years is suddenly receiving duplicates. I have about ten mail accounts on my Mail app, and only this one is having this problem. I haven't changed any rules, I don't have a duplicate account. It's a huge pain, because there's so much I have to delete outright whenever I check my mail, plus, I have to do twice as much maintenance to keep down the amount of trash in the application. Anyone have any idea if this is a bug from a recent update? Or what's going on?
I've got the latest version of the OS X and mail (10.5.7 and 3.6). The account has been many places -- it was on my old G4 that had Tiger, then I got an aluminum Intel Core 2 Extreme iMac with Leopard and migrated everything over from the old system; then Apple had to replace my iMac three times because of power issues. Actually, it originated long before my G4 with Tiger. I've used this account forever. The problem, however, just cropped up spontaneously a few months ago, with no changes on my end. Thanks in advance for any help!

Have you looked on the web site for that one account to see if there are duplicate messages there? If not check that first. If therre aren't any duplicates there, the problem could be as simple as a corrupted Mail Index, which would be an easy fix. Post back with results.

Has anyone solved the notorious "Cannot Connect to Youtube" Error?

Whenever I open the Youtube app I get "Cannot connect to Youtube" no matter what why network I'm on no matter how I'm connected. EVERYTHING else on the phone works perfectly.
Even the youtube website works fine via safari but the videos WILL NOT PLAY.
I have tried all the hit or miss speculative solutions that people claim work for them:
*Change the date past the year 2030 and then back again.
*Hard reset the phone
*Power on power off
*Reset network settings
*Full reset of settings
*Trying different networks
*Connecting to the computer and synching the phone and the apps
None of these work. Some people claim success with one or more of the different methods above but it doesn't work for me and many others. This issue has been going on for a LONG time and it is WIDESPREAD (just search this forum or the internet at large via google and you will see). It spans across multiple devices (iPhone and iPod Touch alike) and multiple software versions across multiple generations of the devices. I find it appalling that Apple is silent on this gaping bug.
Does anyone have a solution? Does anyone know how to get Apple to DO SOMETHING?
Thanks.

Are you senior executives in Apple's cost cutting in the customer service and quality control department or what?
+If it works fine on your friends iPhones when they come over it does not sound like a bug, it sounds like a problem with your iPhone.+
It IS a problem with my iPhone. Anything that causes one of the built in operating applications to fail frequently under normal use whether or not it happens on every device consistently is absolutely by definition a bug.
+Explain why the alleged bug is not on every iPhone then ? This is the bit that you fail to explain in every post you make.+
It may not be on every phone but it definitely is on MANY, what triggers it is unknown. Microsoft releases hundreds if not thousands of bug fixes every year. Why don't all the HUNDREDS of millions of Windows users all experience every single bug? By your logic none of these bugs exists because every single user doesn't experience them. I can't remember the last time I personally experienced one of the bugs that all these mountains of bug fixes I download through windows update automatically correct so I guess none of those bugs actually exist.
+I have read a lot more articles by people who think the world is flat and that means nothing. There are 10 million odd iPhones, 50 people isn't a conclusive fault. explain why 9,999,950 of them appear to work fine?+
There are thousands of people with this problem. With a problem like this a person with even shred of intellect would read a few posts from a few different sources and come to an informed conclusion on the issue rather than dedicate the next six months of their life to reading every single thing ever written about it. Once you see the pattern is exactly the same even in 10 plus posts and it's obvious there are THOUSANDS more you can conclude it's not an isolated incident.
+Thats hardly conclusive - there are youtube video's on how to make an egg custard but that doesn't mean nobody can make one without instruction, or that all egg custards made are defective somehow.+
Inappropriate and just flat out wrong analogy. If there was a "how to make custard when it fails in a specific way consistently" then your analogy would be appropriate. The "how to FIX x" youtube video is not analogous to "how to use your iphone" or "how to do x." In any event comparing egg custard to an iphone is clearly apples to oranges - or more like apples to nuclear reactors.
+Don't bother quoting Google Stats - you can get hits on every search string you put in, and one post gets copied again and again and comes up as multiple hits.+
Really? I had no idea google one of the most successful companies in the world had such a faulty and defective search engine that it gives phony results. Have you told them? Maybe they will hire you to fix it.
You may get SOME hits for any garbage you put in (not really ANY but a lot of garbage) but they won't be very many.
"asldfjla adfkjdsafd" - 0 hits (looks like you're wrong again)
"random string of nonsense searching" - 22,500 hits
"iphone "compass not working"" - 7,700 hits
"ipod "calendar not working"" - 4,570 hits
"iphone "calendar not working"" - 8,490 hits
"iphone "stocks not working"" - 3 hits (really google makes too many phony hits? Are you sure you dont' mean not enough - do you really believe only 3 people ever uttered these words on the ENTIRE internet???)
"iphone "calculator not working"" - 23,900 hits
"iphone "cannot connect to youtube"" - 980,000 hits
"ipod "cannot connect to youtube"" - 859,000 hits
Yep I see it, it's settled now. It definitely must be something I just made up. Looks like nobody else is having that problem. Must not mean a thing that there are more than 100 times more articles on this built in app than a couple others I picked at random. I'm glad you settled this for me how google is broken and only my iphone is misconfigured and the "cannot connect to youtube" error is not widespread.

Has anyone solved the car integration problem with iOS8?

iOS8 broke my car radio's ability to control my iPhone to play music. I use USB, but many people in this community also suffered this over Bluetooth.
Resetting network settings, or installing an iOS update, will make it work once or twice (connecting to the car) but not more.
Has anyone figured out a permanent fix?
Does Apple acknowledge this bug?

Afraid start up is still rough. Even more button pressing required to access. Some apps still reluctant to open. Either slow or simply won't open.
THanks for your comments.

Has anyone solved the notorious "Cannot Connect to Youtube" error/bug?

Whenever I open the Youtube app I get "Cannot connect to Youtube" no matter what why network I'm on no matter how I'm connected. EVERYTHING else on the phone works perfectly.
Even the youtube website works fine via safari but the videos WILL NOT PLAY.
I have tried all the hit or miss speculative solutions that people claim work for them:
*Change the date past the year 2030 and then back again.
*Hard reset the phone
*Power on power off
*Reset network settings
*Full reset of settings
*Trying different networks
*Connecting to the computer and synching the phone and the apps
None of these work. Some people claim success with one or more of the different methods above but it doesn't work for me and many others. This issue has been going on for a LONG time and it is WIDESPREAD (just search this forum or the internet at large via google and you will see). It spans across multiple devices (iPhone and iPod Touch alike) and multiple software versions across multiple generations of the devices. I find it appalling that Apple is silent on this gaping bug.
Does anyone have a solution? Does anyone know how to get Apple to DO SOMETHING?
Thanks.

get the new update 3.1.3. youtube works great for me. not had a problem with it yet...

Has anyone solved the Yosemite and WebEx issue

Ever since upgrading to Yosemite, my WebEx service has become unstable, I get varying issues from complete failure to connect, to bouncing WebEx icon on my tray, through to occasional connectivity. This issue seems to be well known, certainly within my office I am not alone with this issue. Apparently, there is an issue with Pac files and how Yosemite interacts. Has anyone found a fix for this ?

So why won't my password work?
A quote from another thread:
"Long story short the Apple Genius Bar rep told me that they KNOW it's a software flaw, but unfortunately, they have no way to fix it, other than restoring my phone to factory settings" (https://discussions.apple.com/thread/3407403?start=15&tstart=0)
I am not the only one with this problem. I was hoping someone had a solution or even a helpful suggestion.

Anyone solved the blinking statusleds on 1252

Similar Messages

Maybe you are looking for